vCenter 5.5 with ESXI 5.1

Similar Questions

• Try to use the converter to push a VMX and VMDK existing in the environment file. Have you tried the Converter 4.3 and 5.0, continues to crash or delay. A 5.1 with ESXI 5.1 vCenter server hosts going conversion.

  Try to use the converter to push a VMX and VMDK existing in the environment file. Have you tried the Converter 4.3 and 5.0, continues to crash or delay. A 5.1 with ESXI 5.1 vCenter server hosts going conversion.

  Take a look at this article. You can try Converter standalone 5.0.1 or 5.1 beta.

  http://KB.VMware.com/kb/2033315

• Facing problems of performance with ESXi

  Dear Sir

  I am facing a problem and I couldn't find a solution for her, I have two virtual environment on the site of min and the other on the recovery site, and I use SRM between them.

  The main site contains 12 SUN 6270 blade system 5.1 of VMware ESXi and vcenter 5.1 with clarion Cx4 (SAN storage)

  The DR site contain 5 blade Dell 5.1 of VMware ESXi and vCenter 5.1 with clarion CX4 (SAN storage) system

  I'm Clariion Storage VMAX, my question is on the main site when I add and mount LUN to ESXi hosts when I rescan there took an hour to complete a new analysis, the performance is very bad, in the face of the strange disconnect on the issue of the host, although I checked the compatibility between the Sun and ESXi 5.1 It is compatible

  the DR I'm not confronted with this problem it is fast and the performance is excellent.

  I need a solution please

  Fixed after I removed the clarion and fix some issues on Sun blades fiber cards

  performance of becoming better than before

• Storage vMotion possible with ESXi Std Edt or not?

  Hi all

  We have two implementations of VMware with ESXi Standard edition licenses installed on the two site. A site has vCenter Server Foundation edition while the other has vCenter Server Standard Edition.

  The problem is that the site with vCenter Std and vSphere 5 Std doenst allow storage vMotion (see image below)

  

  While, on the other hand, site 5 Stnd vSphere with vCenter Foundation allows storage Vmotion (see image below)

  

  How is it so that vSphere Stndard this edtion of different characteristics in different places?

  I had recorded the call and found the solution... VSphere 5.0 and 5.1 gives really different set of features with the same Std license vSphere.   Take a look at the link for options available with vSphere 5.0 and 51 below.

  1 compare vSphere 5.0 editions

  Compare the editions of vSphere VMware for Cloud Computing, server and data center virtualization

  VSphere editions 2 - compare 5.1

  Compare VMware vSphere editions: managed Virtualization & amp; Cloud Computing

  For a test, I used the same Standard edition server with 5.1 key to it has worked well with Storage vMotion Option available :-)

• PowerEdge Raid700 in RD540 with ESXi Thinkserver

  Hello

  I'll put up a hypverisor 5.5 ESXi update 2 on a lenovo RD540. There is a RAID700 controller.

  I use 3 HARD drive in a RAID6 configured with the tool of the bios (Mega RAID LSI)

  The server works fine, but I don't see the healthy of the RAID on the ESXi.

  I don't see the virtual disk, not the adapter of storage or physical disks. If one lose a disc ESXi does not know, I hear only the PIF from the server.

  How can I solve this problem?

  If I use the "Lenovo easy start' to install ESXi RAID adapter will be with ESXi?

  Thank you in advance.

  Concerning

  Arnaud

  Right now, I'm on the WebBios and I can't find where I can configure it

• Vsan how data store can I create with esxi 3?

  VSAN datastore with esxi 3

  Simple answer: 1

  Linjo

• Could not detect my DPS and hdd with Esxi 6.0

  Hello forum,.

  I bought a relatively new desktop for my studies of cisco computer. I am completely new to exsi and took notes on the net to install esxi.

  In "Select a disk to install or upgrade", I am unable to see the two hard drives.

  I have,

  CPU Intel I7 - 4790K, motherboard Asus Z97 - has

  240GB Kingston SSD

  Toshiba 1 TB HARD drive

  I tried to format the two hard drive using windows 7 and tried to install Esxi 6, but the two remains undetected.

  I tried 5.5 as well but the result is the same.

  Help, please.

  Thank you.

  ESXi is built for server hardware, he may simply not support your disk controller. Since it is a lab environment, you can check if VMware experience before: how to make your unsupported work SATA AHCI Controller with ESXi 5.5 and 6.0 helps build a custom installation image that runs on your hardware.

  André

• High latency LDAP with ESXi 6

  We have Gen9 HP with Emulex 10 GB (driver v10.5.121.7) runs the last 6.0 ESXi and high latency experience above 50ms to 1.5 seconds with LDAP queries between continuous Windows or VM to DC.   However, to move the domain controller to an ESXi 5.5/6.0 with the latency of the network 1 Gb is down to below 50ms.  If you ping just two servers, ping response is < 1ms.

  Anyone else having this problem? It seems to happen with ESXi 6.0 with 10 GB Networki.   ESXi 5,5 of 10 GB seems to work very well.

  > 50ms up to 1.8 seconds at the time of the request

  ESXi6 DC VM to ESXi DC VM on the same host, 10 Gb DSwitch

  ESXi6 DC VM to ESXi DC VMS on different host, 10 Gb DSwitch

  < 50ms

  DC - DC physical physical

  ESXi5.5/6.0 DC ESXi5.5/6.0 DC on 1 GB network VM VM (Ping is < 1ms, copying files is > 100MB / s)

  I've checked package drops with esxtop with view network, no packet drops.

  I used the following script to the extent that made 10 requests from a user and takes the average time.

  The result is coherent fairy.

  http://social.technet.Microsoft.com/wiki/contents/articles/26227.how-to-measure-the-response-time-of-your-domain-controllers-when-running-an-LDAP-query.aspx

  When the bare metal servers and vm windows 2012 participate then try disalble rsc in the virtual machine

  Disable-NetAdapterRsc

• Having problems with ESXi/vSphere Client Network

  First of all, I apologize if it's thread is in the wrong section.

  I recently installed ESXi v6.0.0 in VMware Workstation 12.0 trying to familiarize myself with ESXi as I recently graduated and I forgot most of what I learned from the class I took.

  Then, ESXi installed smoothly and was very painless.

  Then, I tried to create a virtual machine. It's when things are messy. I can't understand why, but I don't get any network connectivity after obtaining a DHCP address to all within the virtual machine, in addition to being able to ping the host ESXi itself.

  First of all, networking is like so:

  10.10.10.1 router/gateway

  10.10.10.254 DHCP, DNS, server, VMware Workstation files 12

  10.10.10.250 ESXi host

  10.10.10.244 ESXi reviews - Windows 7

  Googles DNS 8.8.8.8

  VMware workstation 12:

  AMD FX-8350

  Intel Corporation 82574L Gigabit Network Connection

  NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) - However, not allowed to work with VMware VMware or xvnc throws a fit to this topic

  ESXi host

  Images: 2015-10-04_21-13 - 57.png, 2015-10-04_21-14 - 34.png

  The vSwitch has the following properties:

  Image: 2015-10-04_21-19 - 38.png

  
  

  And the following then occurs on the ESXi prompt:

  Images:,2015-10-04_21-01 - 58.png, 2015-10-04_21-03 - 32.png

  
  

  I can't really understand what the problem is, or what is happening. Yes, I could set up an internal network of the virtual machine with a firewall and what not, but I was hoping that there would already network connectivity while I wouldn't do. Also, is it possible to make attachments online?

  
  

  Thanks for all their help
  

  This could be a problem of permission on the host vmnet adapter, see http://kb.vmware.com/kb/287.

  André

• Can I use 6 Converter Standalone with ESXi 5.5?

  Hello

  We are running ESXi 5.5 and wishes to conduct P2V.

  Just would like to ask you if we can use "Standalone Converter 6" or we should use "Standalone converter 5.x?

  Thank you

  Yes. Converter 6.0 is backward compatible with ESXi 5.0, 5.1 and 5.5.

• upgrade windows vcenter 5.1 with oracle external to the appliance database virtual 6

  Hey people,

  We have a Windows external Vcenter 5.1 with an oracle database server. We would like to upgrade to an appliance Vcenter virtual v6 with an external oracle database. I was not able to find much info on this since most posts and blogs are based or sql.

  Is it as simple as deploying a new installation of a Vcenter virtuall device v6 and then connect it with our database current oracle and move virtual machines and turn from the old Server 5.1?

  GR,

  Michiel

  Welcome to the community,

  You can not skip vcenter windows 5.1 with oracle external to the appliance database virtual 6. You can improve windows vcenter 5.1 with oracle database external to vCenter windows 6.0 with external oracle database.

  From now officially VMware does not support migration from Windows to vCSA. But it is adventure, you can explore more

  https://labs.VMware.com/flings/VCs-to-VCVA-converter

  Concerning

• Update VCenter 4.1u3 with builtin SQL 2005 Express v5.1?

  Hi people,

  Can someone please tell me if the upgrade path is supported without problem as possible for my script below:

  Existing: VCenter 4.1u3 installed as Windows Server 2008 64 bit standard VM with the database running in SQL SERVER 2005 Express (embedded).

  to be upgraded online to:

  Proposed: VCenter 5.1u1b installed as Windows Server 2008 64 bit standard VM with the database running in SQL SERVER 2005 Express (shipped).

  VCenter 5.1u1 comes with SQL Server 2008 Express or reuse it just the existing integrated DB?

  Because when I specify using products VMware interoperability Matrices it displays all the comments in the table.

  Hello

  You can upgrade vCenter server 4.1Update03 to 5.1Update01a, and it keep MSSQL2005 express Embedded DB and data in it. VCenter server upgrade with no problems found. I think that the product of VMware interoperability matrix titles only to distance/Custom not Database not the fact embedded database part of the vCenter server installation.

  If this isn't a supported database, upgrade to vCenter server would have failed to be upgraded with the inconsistent database or considering implementing in custody.

  During the upgrade to vCenter server 5.1Update01a, it asks you to install Single Sign and the inventory service.

  Nithin-

• Vshphere Client 5.1 can't connect with esxi 5.0 and earlier

  Hello

  I am facing a strange behavior I me client Vsphere updated 5.1 but now it is impossible to connect with esxi 5.0 and older versions. When I try to connect to an earlier version of esxi it show me update popup but unfortunately on this machine I can't connect to the Internet ihave manually download a patch?

  Talha Correia

  Hello

  You must download and install the client on your computer.

  You can find in the download section of the website of VMware vSphere.

  It comes to 5.0

  https://my.VMware.com/Web/VMware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_0

  Francesco

• Best practices for vCenter 5.1 with Microsoft SQL Server 2008 R2

  I am looking for a best practices or really any documentation on configuring vCenter 5.1 with a SQL Server 2008 R2 database. I see that SQL Server 2008 R2 is supported, but that's all. Any help is appreciated.

  Unless you have a huge (and I mean huge) environment, the vCenter database in general is not that big of a deal or go-getter and was apparently not deemed worthy for some secret magic tips because of this.

  Standard SQL "best practices" and observe the standard installation documentation when deployment vCenter and you should be good to go.

  Some documents on the vCenter more in-depth database are here:

  http://www.VMware.com/resources/TechResources/10162

  http://www.VMware.com/resources/TechResources/10302

  Also, I highly recommend you watch this recording of VMworld:

  http://www.YouTube.com/watch?v=5Ly64_ca7-I

• HP DL360 G6 "Noncompliant" with ESXi 5.1

  Hello

  I have two DL360 G6 running with ESXi 5.0U1 and I wanted to upgrade to 5.1.

  I downloaded die ESXi HP - 5.1.0 - standard-iso and added to the Update Manager, but when I check for an upgrade, I get the error that the servers are "Non-compliant".

  The DL360 G6 VMware Compatibility Guide must be supported for ESXi 5.1.

  Is it possible to know why it is Non-compliant?

  If I'm not mistaken, UM produce generally / alert error "Non-compliant" If ONLY your hosts (ESXi 5.0) do not correspond with your intended base line (5.1 ESXi) when you attach it to the guests. However, once you patch the host with this baseline, it should change to consistent.

  'Inconsistent' should be of concern.