Vcenter merging with SRM

Similar Questions

• Go with SRM or replication of VSphere

  Hi all

  I'm looking for a review here.

  In our current environment, 600 more VM is get replicated to disaster recovery site using third-party replication tool. As we intend to upgrade our whole environment to vSphere 5.1, we intend to use the replication of vSphere. We do not plan to use SRM at this point.

  We have two Vcenters, one for the env Prod and other for Dr. approx. We have our replication go on a dedicated channel for OC / 24.

  We are not woried about the Automation and do not come back to this point, MRS is not a choice at this point.

  Questions.

  1. with the limitation of 500 rehearsals (employment) for the unit of replication VSphere, ho we satisfy our need of 600 replications?

  2. can we use vSphere several devices of replication on each site (by vcenter) without using SRM?

  3. If it says 500 is the maximum supported, loads of work how I can configure on device for proper operation.

  4. should I consider SRM in this stadium? If yes why?

  Appreciate your help in this regard.

  Thank you

  Dembélé

  I see, but I guess that at least for a start and a conecpt evidence of the use of VR, a single VRS is enough. In addition, you can always high-end to SRM later and get better performance with the deployment of new technologies...

• iCal on my mac, then merge with iCloud

  I would like to use iCal to automate a task every night, I tried to do it via iCal. I want iCl to open a specific program to save my catalog of photography at a specific time (while I'm asleep), then close in the morbibg until I wake up. I used the custom alert to do, who works for a day or two, then iCloud removes the custom alert and all I'm left with is a reminder without action.

  Ideally, I would like to create a reminder that "on my mac" as I don't want this reminder popping up on my other Apple devices, because it is no longer relevant to my 27 iMac (my work computer).

  I tried to create a calendar that is only "on my mac" that I did it by disabling the iCloud, make a schedule, creating personalized with custom alarm, reminder and then turning power on. The only problem is iCloud absorbs only nine "on my mac" calendar and eventually turns off the custom alert, so I'm no further forward in doing so.

  Please can anyone help because it's so boring. Why did you take this Apple? Not everyone wants everything in the iCloud all the time!

  Thanks in advance.

  Hello daxdavies,

  Thank you for using communities Support from Apple. I know have a problem with the calendar on your Mac app, it's not what you expect. As I understand it, you can't make and keep a schedule "on my Mac", as when you activate the iCloud "on my Mac" gets merged with iCloud calendar and gets synchronized on your other devices. Personally, I've tested this and couldn't replicate, so here is what I suggest to identify and solve your problem:

  1. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test this problem by disabling your iCloud calendar and create the event and a timetable "on my Mac" then restart your Mac and reactivating the iCloud calendar.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  2. If you are still experiencing a problem, you can know if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to another user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• When I use the mail merge with excel file, after I press ok the progress bar indicates "NaN", mail project window crashes. My record is nice little CVS n

  When I use the mail merge with excel file, after I press ok of the progress bar indicates "NaN", mail project window crashes. My file is in the correct format and small size (4-column 4 raws). I use an English version of thunderbird after accidentally, I installed one in my tongue.

  I am attaching the screenshot

  I solved the problem
  has been st@pid excel

  I created a CSV file in openoffice calculator and everything went smoothly

• How to create the new library of Photos to iCloud without it merging with the former?

  I started my iCPL in January 2015. It is now 104 Gb/8000 photos. In a year I need to upgrade my plan of storage iCloud.

  So I think I would make the existing one a regular photo library, and start a new photo library iCloud.

  If I start a new library now and make the iCPL, merge it with the existing iCPL. I want to replace the existing in iCloud.

  I could do (I think): -.

  1. make the existing a non-iCPL and rename it.

  2. create a new lib Photos and make the library system iCloud.

  3. the new library (empty) will download and merge with the former in iCloud, so it contains now 8000 photos of the original lib.

  4. delete all the 8000 photos in the new.

  5. start put new photos in the photo library now empty iCloud.

  Is there a better way? I do it too difficult?

  I can see what I've described above taking a long time to settle on all devices, even if I can avoid 30 day waiting by removing the deleted record recently.

  Thank you

  You use "Optimize Mac Storage" on your Mac? Then, you will need to make sure that all the photos to download to your Mac before you copy your current library corresponding to your backup disk and start deleting iCloud.  Is there enough free storage on your Mac to do this?

  I would also like to than my thin iCloud library. My iCloud library has only my favorite photos of many years, I want on all my devices as well as the most recent photos that I'm still trying. Because the iCloud library must be the library system, only in iCloud library photos are available in the media for other applications browser, so I keep all the photos here that I can use in other applications.

  What I do to save bandwidth and download time is to have two libraries:

  1. A large library where I keep all the photos I want to keep - it's my photo archives. This library is on an external drive that is supported by Time Machine and is currently still an Aperture library.
  2. A smaller library iCloud in my pictures folder.

  I import new photos first to the iCloud library, remove all the bad moves that do not need archiving, then I export the originals at the library of the archives.

  And then I start editing the photos in the library to iCloud and learn by removing and keeping only the best photos.

• 100 GB Vista full boot need to merge with the E drive.

  I have vista, my startup diskc: disk is full Iwant to merge the e drive?

  100 GB full Vista, 1 disk boot hard need to merge with the E drive part.  HOW?

  Hello

  What is the size of the E:Drive?

  E: drive may be the recovery disk to reinstall the OS, if there is between 5-15GBs.

  Do not touch, except to make the recovery of the disks.

  Here is the info on the recovery disks >

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: or E: drive of recovery should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If E: is not the recovery disc, with disc of Vista management you must use all the space of the E: drive, doesn't not part of the E:.

  See if this applies to your situation.

  Save all data on E: > E: remove > and then extend C: into the now unallocated space where E: was.

  "How delete and extend a Partition with Vista disk management"

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can use these methods to get space on your C: drive:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  http://www.Piriform.com/CCleaner

  Do NOT use the part of the registry of CCleaner.

  See you soon.

• Line 1 columns do not merge with Row 2 columns in InDesign Script

  It is my code: -.

  var myTableFrame.insertionPoints = myTable [0].tables.add ({columnCount:3, headerRowCount:1, bodyRowCount:2});})

  myTable.rows [0] .cells [0] .silence = "A";

  myTable.rows [0] .cells [0].merge(myTable.rows[1].cells[0]);

  But:-below the job line: -.

  myTable.rows [0] .cells [0].merge(myTable.rows[0].cells[1]);

  myTable.rows [1] .cells [0].merge(myTable.rows[2].cells[0]);

  
  

  ------------------------------------------------------------------------------

  Problem is that column 1 & 2 of the fusion of line 1

  and the column 1 row 2 & 3 fusion

  but, to the column 1 rank 1 & 2 fusion has not and no column of row 1 merger with column of line 2

  Can someone help me please...

  Thank you...
  

  Problem solved: -.

  1. we cannot merge with bodyRow headerRow columns...

  2. we can merge with headerRow headerRow columns...

  3. we can merge with bodyRow bodyRow columns...

  In the case of line 1 should be used below line: -.

  var myTableFrame.insertionPoints = myTable [0].tables.add ({columnCount:3, headerRowCount:2, bodyRowCount:2});})

  OR

  var myTableFrame.insertionPoints = myTable [0].tables.add ({columnCount:3, bodyRowCount:3});})

• Cannot find a service record for vCenter service with the host name "IP address"

  After upgrading to vCenter native 5.5 to vSphere Client device everything works, but not all orders for PowerCLI.

  After a command gives me error under VMware vSphere PowerCLI 6.0 Release 1

  Get-TagCategory: 13.07.2015 16:50:48 Get-TagCategory could not find a service record for vCenter service with host name 10.x.x.x

  In Zeile:2 Zeichen:1

  + Get-TagCategory

  + ~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get-TagCategory], VimException)

  + FullyQualifiedErrorId: ViCore_InventoryServiceProxy_GetInventoryServiceInfo_NoVcRegistration, VMware.VimAutomation.ViCore.Cmdlets.Commands.Tagging.GetTagCategory

  does anyone have a solution or an idea for this problem?

  Best

  Marco

  I have exactly the same problem. Are there solutions yet?

  Best regards

  René

  Found the solution in the database (2127028).

• Where is Merge with similar lines?

  Having recently upgraded to Pro XI in DC and I am unable to locate the files to be merged with similar measures. This exists in DC or is there a way to do this without going back to XI Pro?

  Hi John,.

  I see at the bottom of the Action Wizard pane, you have an option to AutoSplit Pro. It's a third party plug-in for Acrobat, and I bet that's the source of all the other measures (they are not included with Acrobat Pro XI). Thus, it seems that you have lost access to this plug-in (which can happen with the update, because DC only supports 64 - bit plug-ins architecture).

  You may be able to recharge that plug-in for Acrobat DC. If not, I would check with Evermap to see if they have a newer version: http://www.evermap.com/autosplit.asp

  Best,

  Sara

• I need Adobe Pro Extended add-in so that I can have the Adobe merge with an option of pdf Word 2013. How can I go about it?

  I need Adobe Pro Extended add-in so that I can have the Adobe merge with an option of pdf Word 2013. How can I go about it?

  Hi jenniferw,

  This feature is included in Acrobat XI (since version 11.0.01) and later. You have Acrobat XI or Arcrobat DC?

  Best,

  Sara

• Question about merging with the function of the background

  Hello, I was wondering if someone can tell me when it is useful to use the fusion with the function of the background.  I see nothing in the documentation on the subject. It seems to me that you can make your changes on the master slide, and you would not need the feature.  If I'm misunderstanding please let me know, thanks.

  Hello

  Is not safe to be comprehensive here, just my ideas. If you merge objects with the background on a master slide, you can save on the size of the file, because the background is an image, compared to several objects. You will not be able to edit these objects more. Also the slide background will always be behind any object. For slides model objects you can have them either on top, where they sit on top of the stack, or not. If you have objects of time during the rest of the project, they will always be on top of the slide background, but if you slide model objects, they'll be on top of the object of time during the rest of the project, unless you put that one always on top. You can disable to show slides on normal leaves model objects, separately from the power off from the slide background. Some of my ideas. For objects that I still want to be with the background, I'd prefer to merge. For objects that do not always, I will keep the separately and it is of course always the case for the button of interactive form that you cannot merge with the background (which is just an image, non-interactive).

  Lilybiri

• Merger with two screens

  Hi all

  I have been using Fusion for some time now and recently put on a 20 "iMac with a second screen to 1280 * 1024 (think that's what it is).

  The trick has been to install merge with Windows XP & run on the second screen, then using spaces, configure Windows used the second monitor

  This worked well, the views are properly recognized by iMac in 1680 * 1050 & the second screen 1280 * 1024 is correctly shown on the iMac & space works very well.

  However, Windows made a complete mess of the display using the highest resolution (I guess the iMac) and enlargement of the image beyond the screen, there are scroll bars to move around the office.

  This despite say right click Windows display properties, settings tab to 1280 * 1024 - there a box but is grayed out to "extend my Windows desktop to this monitor" which looks like it should be removed, if I dare say that I have to logon with Admin rights, but that is no big thing. Yet another example of what a nasty piece of bad programming Windows may be what Im like he can't even recognize a display.

  Enyone else knows this and if so how is it overcome?

  I installed VMWare tools but that diddnt have all options to set the display size, unless I missed something obvious.

  Thanks in advance for any help

  N

  I assume you are using the full screen. Have you checked view > use all displays in mode full screen?

• How to resize a 3D object after beeing merge with others

  Hello

  I would like to know how to resize a 3D after the merger with another 3d object object.

  I know not how to do this before merging, but Photoshop can import 3d as 3DS for example objects and

  After the merger of some appears very low compare to others...

  After the merger, it seems that it is only possible to resize the object piece by piece.

  When I resize before the merger, it makes no difference after the merger...

  Thanks for helping me

  You can resize the objects after the combination by adjusting the individual meshes

  on 3d objects more.

  http://help.Adobe.com/en_US/Photoshop/CS/using/WS31576EB8-5348-4a1e-A4E7-7D122A56F41F.html

  http://help.Adobe.com/en_US/Photoshop/CS/using/WS73EB2D8A-AAE0-4928-9BB6-357D63B1C855.html

  MTSTUNER

• Licensing vCenter with SRM

  Hi all

  I seem to be going round in circles with this question - I have read the documentation and recorded a call with the service the customer on this subject, and the answers are contradictory to say the least...

  We seek to implement a SRM solution in a new infrastructure - essentially a management cluster will use SRM failover management of virtual machines to a domain protected to a DC recovery in another city controller.  The DC recovery will be dark for normal operations, only more direct when MRS. failover occurs and will not host virtual machines.

  The question I have vCenter licenses of MRS. The documentation states that, during failover of a vCenter server from a site protected for a recovery site hosting any other virtual machines, only 1 vCenter license is required. However the VMware licenses team said the 2 licenses are required for automatic restoration of VMs for the protected site of origin once he recovered.

  So, who is? Any thoughts anyone (who is not a dealer or someone trying to sell me licenses)? Happy qualify points if necessary to answer the question...

  See you soon.

  Jeremy.

  the vcenter in Dominican Republic must be put under tension and linked with the SRM server of the RD, in this scenario, it's actually light and 2nd license is necessary.

• Add vCenter fails with CertificateChainValidator - vCO 6.0.3

  I had a running off vCO 5.5 self-service portal using a bunch of users.  I deployed a 6.0.3 vCO device VM and imported the config.  I finished the configuration, and all radio buttons are green on the site Configuration port 8283.  When you try to add vCenter using the workflow 'Add an instance of vCenter server', it does not immediately in the workflow "Import a certificate" with "ReferenceError: 'CertificateChainValidator' is not defined."  I have imported the SSL certificate of the vCenter and the PSC under Network-> SSL Trust Manager.   All certificates are self-signed because MRS. 6.0 would not work with CA Cert on vCenter has signed at the time where we deployed SRM.  I have not touched the CERT on vCO 6.0.3... trying to take the path of least resistance to maintain vCenter and SRM running and get the vCO online.  I checked vCenter MOB and there are no extensions of vCO.  How can I get vCO 6.0.3 is registered correctly with vCenter?  My vCenter is a VCSA and 6.0 build 2656761.

  VMware support was able to understand this.  For some reason, not all the workflow was available even though I deployed a new 6.0.3 camera and imported the config of my old 5.5 instance.  So we went into the Web of Orchestrator Configuration page-> troubleshooting and click 'Reset the current Version' for plug-ins.  Bounced, she and the missing workflow was there.  Back then in the Web Configuration Orchestrator page-> vSphere Configuration under general and enter IP address of our vCenter PSC and [email protected] used.  The appearance of the data worked, I checked most of the boxes and could see vCenter in vCO thereafter.