Merger with two screens

Similar Questions

• SX2210T-touch screen with two monitors feature

  Solution found by the user ES128 for touch dual monitor.
  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  Screen touch troubleshooting.
  * Disconnect the 2nd monitor of the PC. Restart the PC so that it only displays one monitor in Device Manager. Depending on your operating system, do the following: -.
  SX2210T Driver (Windows 7 only)
  SX2210T-Touch Application
  SX2210T-Touch Cam
  SX2210T facial recognition Application (no not necessary, only if you want)
  * Test the touch screen on the single monitor feature.

  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  I have the 2220 sort of setting before the 2210 so it seems I have a gigantic version of the laptop Acer Iconia with two screens.

• How can I printscreen, only one of the two screens I use now?

  I work with two screens and when I try to printscreen the computer takes the two images on the screen and print, making the really small screen images to the point that they are almost impossible to read.
  I want a pint only one of the two screens.

  Hello

  Try the capture tool:

  How to use the Windows Vista Snipping Tool
  http://www.bleepingcomputer.com/tutorials/tutorial135.html

  Use capture tool to capture screenshots
  http://windowshelp.Microsoft.com/Windows/en-us/help/1337cdba-52a2-4704-ad4d-2d7bace605b41033.mspx

  How to take screenshot with the capture - simple tool
  http://Lifehacker.com/228885/Windows-Vista-tip--take-screenshots-with-the-Snipping-Tool

  Cup - best tool screenshot screenshot
  http://desktoppub.about.com/od/screencaptures/IG/Snipping-Tool/Snipping-Tool.--0k.htm
  http://graphicssoft.about.com/b/2009/05/15/using-the-Snipping-Tool-in-Windows-Vista.htm

  How to take a screenshot with the tool captures of Vista
  http://www.WikiHow.com/take-a-screenshot-with-the-Snipping-Tool-in-Vista

  Use the Windows Vista Snipping Tool to take screenshots
  http://www.tips4pc.com/articles/Windows%20Vista/use_the_windows_vista_snipping_t.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Color variation of Windows 7 on two screens despite the correspondence of the monitors, model, connection & settings

  I'm managing about 20 machines to windows 7 64 bit, but have noticed that, in each of them with two screens, there is a slight color variation (right monitor being darker and more colorful) between the two monitors despite the monitors of the same brand and model (workstation make & models vary).

  As a test I switched monitors and the problem remains.
  I also tested the type of connection cable / in case the fault is due to the difference between VGA/DVI but the prob persists indicating is not the screen, indicating that it is to the BONE (the denominator) as graphics cards vary also in the brand/model.
  would be very happy for any help you can offer
  Thank you

  Hello

  The question you have posted is better suited for the TechNet forums. You can post the question on the link below.
  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps!

• Work with two monitors in Premiere Pro.

  Hello

  I'm new in the use of first Pro CC. I would like to know how you set the workspace in first to two screens. In Final Cut Pro X, there is a button where you can set the workspace to work with two screens. Where is this feature in the first? I've not found in "Workspace" or "Preferences". Please, if anyone with a tip, I'm a happy man.

  Kind regards

  Bo

  See if they help you:

  Two monitors

  Dual display

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

• Split screen in two and purple lines with yellow screen?

  So, I was watching a YouTube video and my screen started flashing all crazy. So I turned it and turn it back on and now my screen is yellow with purple lines and there are like two screens because it is split in the Middle goes horizontal. Sometimes I turn it on and it works very well for about 5 minutes then it starts flashing and goes back to all these things. I would like to safe mode, but I do not see Scripture because that its all messed up. I also try changing the screen resolution setting, but it won't let me for some reason any. Here's what my screen looks like http://s1353.beta.photobucket.com/user/zachman12356/media/untitled.png.html?sort=3&o=0

  On Sunday, November 4, 2012 18:07:12 + 0000, ZachMan101 wrote:

  So, I was watching a YouTube video and my screen started flashing all crazy. So I turned it and turn it back on and now my screen is yellow with purple lines and there are like two screens because it is split in the Middle goes horizontal. Sometimes I turn it on and it works very well for about 5 minutes then it starts flashing and goes back to all these things. I would like to safe mode, but I do not see Scripture because that its all messed up. I also try changing the screen resolution setting, but it won't let me for some reason any.

  It is certainly not a question of Windows. You have probably one
  problem with one of these three things:

  1. the monitor

  2. the video card

  3. the cable connecting the monitor and video card.

  First try the cable and make sure that it is closely related to the time
  ends.

  If this is not it, see if you can borrow a monitor from a friend and try
  instead of yours. If this solves the problem, you need a new
  monitor.
  If this solves the problem, it is probably the video card. But
  before you replace the video card, open the case and make sure that it is
  sitting in his niche.

  Ken Blake, Microsoft MVP

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

  I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Lightroom 6 develop Mode.  Screen loupe and compare view after screen show blue background with two diagonal lines of tbrl top low right another top right at the intersection of criss left in the Center.  If I move to another photo, the program stops

  Lightroom 6 develop Mode.  Screen loupe and compare view after show blue background wallpaper with two diagonal lines left and top right side of the other top right at the crossroads criss left in the Center.  If I move to another photo, the program no longer works and ends by asking me to close the program. Help?

  Go to your Lightroom preferences, performance tab, uncheck the option of the graphics processor.

• Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried it several times redownloading. What sh

  Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:

  See if the following can help:

  White screen

  https://forums.Adobe.com/thread/1249756

• Two screens with a green line during video playback

  So ago as the topic says I get two screens and a green line, which is in the midst of them, when I play a video with flash. When im on youtube and I have change the quality it better but it does not work all the time. I'm sure it all started when I got the updated flash on firefox. Please help because it's really boring. Thank you

  Hi, update the FF 3.6.15 gave me a problem too!

  go to this site and right click on the Flash logo, settings, display settings. Disable hardware acceleration.

  http://www.Adobe.com/software/Flash/about/
  See if that helps.

  If this isn't the case, when you reply back put your operating system and browser. Also if your system is a 32-bit or 64-bit.

  Thank you

  eidnolb

• Double screen with two VGA monitors (model Inspiron 620)

  Hello

  I have an Inspiron (processor i5-2320 @3 GHz) 620 office. The graphics card is AMD Radeon HD 6450.

  With two displays analog VGA, I wanted to dual monitor.

  My problem is that the Office does not recognize the two vga monitors but that one monitor. Vga ports (I have two) on the desktop do not work at the same time.

  So, I tried to use the DVI port, but it is only allowed to use DVI - D (I thought I'd use two monitors if allowed the graphics card DVI connector VGA). DVI - D deosn seem to allow analog monitors.

  Currently, I only use one of the two with an analog monitor vga ports.

  I wonder if I should buy the new digital monitor that can be connected to the DVI - D port.

  Or is there a method to use both on the desktop vga ports?

  riofunk7,

  You have two options...

  (1) connect both monitors to the ports added discrete video card
  (2) connect a monitor to the integrated VGA port. Connect the other monitor to the additional port of discrete video card
  * Reboot the system
  * Press F2
  * Navigate to Advanced-Graphics Configuration
  * Activate Intel several monitor function
  * Press F10 to save your changes and exit the bios

• Why the video screen is split with two identical images?

  After a clean reinstall of Windows XP and Internet Explorer 8, Flash Player 11.6.602.180 has been downloaded.  Video clips now play with the screen split horizontally by a green line and the identical images above and below, compressed vertically in function.

  Lotus14

  Most likely, you are using an outdated graphics driver; See http://forums.adobe.com/thread/945765

• iCal on my mac, then merge with iCloud

  I would like to use iCal to automate a task every night, I tried to do it via iCal. I want iCl to open a specific program to save my catalog of photography at a specific time (while I'm asleep), then close in the morbibg until I wake up. I used the custom alert to do, who works for a day or two, then iCloud removes the custom alert and all I'm left with is a reminder without action.

  Ideally, I would like to create a reminder that "on my mac" as I don't want this reminder popping up on my other Apple devices, because it is no longer relevant to my 27 iMac (my work computer).

  I tried to create a calendar that is only "on my mac" that I did it by disabling the iCloud, make a schedule, creating personalized with custom alarm, reminder and then turning power on. The only problem is iCloud absorbs only nine "on my mac" calendar and eventually turns off the custom alert, so I'm no further forward in doing so.

  Please can anyone help because it's so boring. Why did you take this Apple? Not everyone wants everything in the iCloud all the time!

  Thanks in advance.

  Hello daxdavies,

  Thank you for using communities Support from Apple. I know have a problem with the calendar on your Mac app, it's not what you expect. As I understand it, you can't make and keep a schedule "on my Mac", as when you activate the iCloud "on my Mac" gets merged with iCloud calendar and gets synchronized on your other devices. Personally, I've tested this and couldn't replicate, so here is what I suggest to identify and solve your problem:

  1. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test this problem by disabling your iCloud calendar and create the event and a timetable "on my Mac" then restart your Mac and reactivating the iCloud calendar.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  2. If you are still experiencing a problem, you can know if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to another user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!