VCenter Service database WARNING

Similar Questions

• vCenter Service won't start - error in SQL database

  After a failure in our system of vCenter Server virutal starts at level fine Windows, but would not launch vCenter Service

  Error when you go to Services and choose to start the service "VMWare VirtualCenter Server.

  'Service '.

  Windows could not start the VMware VirtualCenter on IBMVC01 server. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code. »

  In the system event log:

  EVENT ID error: 17809

  Could not connect because the maximum number of '1' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: local machine >]

  I googled around and found a few shots on the connection to SQL and issuance of an order to increase this authentication / connection number, but when I run the SQL Studio Express tools and try to connect to the database that the local administrator account he errors on authentication.  I keep poking at the issue, but he was hoping someone else has had this problem with vCenter and has an idea.  I have a battery of 28 knots box by with a dozen systems could not be started due to file locking issues.

  Thank you

  You must use SQL Management Studio, not express, or if you have a DBA, make him make the change

  http://KB.VMware.com/kb/1026463

• VCenter service is getting arrested after a while

  Hello

  We use Vcenter server 5.0. In recent days, we have observed that vcenter service will automatically stops after a while and cause the backup fails.

  We investigated the event viewer on this and found a sql transaction log event is full.

  Can someone help me get this resolved?

  Thanks in advance.

  Steps below should be useful for the resolution. Please check.

  1. Connect to the Microsoft SQL 2005/2008 Server as an administrator.
  2. Open SQL Management Studio.

     Note: If you are using MS SQL 2005,.
     check that you are using MS SQL Management Studio 2005. Alternatively, if you use MS
     SQL 2008, check that you are using MS SQL Management Studio 2008.

     Right click on the database using VirtualCenter.

  3. Click on Properties.
  4. Click the Options link.
  5. Set the recovery model simple as follows:
     Click OK.
  6. Once this operation is finished, right click on the database again.
  7. Click on tasks > shrink > files.
  8. In the Shrink Database window, select the file type as "Log".  The name of the file appears in the filename drop down as databasename_log as follows:
     Displays the workspace used compared to the allocated space. After you set
     the Simple, the majority of space recovery model in the
     released transactions.
  9. Make sure that the radio button to release unused space is selected.
  10. Click OK in this window to reduce the transaction log.

• Cannot find a service record for vCenter service with the host name "IP address"

  After upgrading to vCenter native 5.5 to vSphere Client device everything works, but not all orders for PowerCLI.

  After a command gives me error under VMware vSphere PowerCLI 6.0 Release 1

  Get-TagCategory: 13.07.2015 16:50:48 Get-TagCategory could not find a service record for vCenter service with host name 10.x.x.x

  In Zeile:2 Zeichen:1

  + Get-TagCategory

  + ~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get-TagCategory], VimException)

  + FullyQualifiedErrorId: ViCore_InventoryServiceProxy_GetInventoryServiceInfo_NoVcRegistration, VMware.VimAutomation.ViCore.Cmdlets.Commands.Tagging.GetTagCategory

  does anyone have a solution or an idea for this problem?

  Best

  Marco

  I have exactly the same problem. Are there solutions yet?

  Best regards

  René

  Found the solution in the database (2127028).

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• vCenter service starts do not automatically after the server restarts

  Hello

  We use vCenter Server 5.5.0 build 1476327 installed by using Installation Mode on Windows Server 2008 R2 with SQL 2008 R2. All SSO, inventory service, vcenter, customer web etc, are on the same server.

  VCenter server service is set to automatic (startup type), Local System (connect as). However at the restarting windows server vCenter, vcenter service does not automatically start and it gives error in the vpxd.log below. But if we manually start the services vcenter, it works very well.

  2014 02-12 T 17: 38:49.186 + 05:30 [03016 info 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VC55DB with username vpxuser

  2014 02-12 T 17: 38:55.750 + 05:30 [03016 info 'Default'] [VdbSchemaLoader::LookupSchemaFromDB] loaded schema information and DB index

  2014 02-12 T 17: 38:59.586 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6058ed8 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12094

  2014 02-12 T 17: 39:12.034 + 05:30 [02040 WARNING opID "VpxProfiler" SWI-56f32f43 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12448

  2014 02-12 T 17: 39:24.094 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-31169898 =] VpxUtil_InvokeWithOpId [TotalTime] took 12059 ms

  2014 02-12 T 17: 39:36.549 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-6a5d128c =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12451

  2014 02-12 T 17: 39:48.618 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6d7d4b3 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12045

  2014 02-12 T 17: 40:00.625 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-55e83917 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12007

  2014 02-12 T 17: 40:12.994 + 05:30 [02040 WARNING opID "VpxProfiler" SWI - 3113 c 398 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12251

  2014 02-12 T 17: 40:25.196 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-35702e2f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2014 02-12 T 17: 40:37.852 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-4b63962d =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12646

  2014 02-12 T 17: 40:49.875 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6c4f3258 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12019

  2014 02-12 T 17: 40:56.287 + 05:30 [03016 info 'Default'] judgment of VMware VirtualCenter forcing now

  Check connectivity ODBC (SQL authentication), looks very good. Don't know what are these VpxProfiler warnings in the newspaper, after which the VirtualCenter is forced to stop.

  Please advise on this.

  Thanks in advance!

  Try to set the vcenter service in Automatic (delayed start mode) leave the sql first service started. to the Webcomic.

  hope it will settle your error. same problem I faced and fixed in this way.

  Thank you.

• vCenter service stops

  Hello

  I'm under vCenter 5.0 U1 and my database is on a SQL Server 2008 Cluster, use Windows authentication.

  Whenever my SQL team switches the server, the vCenter service stops. This causes quite the headache from my backup software requires is configured to retrieve virtual machines via vCenter.

  Someone at - he never see cela or know a solution?

  THX

  Mike

  First of all, I would like to point out the race vCenter on Cluster SQL is not fully supported and VMware Support on best efforts basis.

  I've seen most of the time a manual intervention is required to start the return services after cluster failover

  Check the options for high availability of the server vCenter supported

• inventory of vCenter Service backup frequency

  
  Hello

  Could you please advice the importance of backup service of inventory in vSphere 5.0 update 1 version. If this is taken daily or he is allowed to make a backup of the inventory once a month if there is no important inventory changes.

  See you soon

  Hi Pan1268,

  Inventory service stores vCenter Server data and application inventory, which lets you search for and access the items in the inventory through linked server vCenter instances.

  The thing to note is, if the Inventory Service database has a problem and the service starts not etc., we have options to reset the database to the inventory Service. This also applies to things such as material errors of status etc.

  If resetting the database does not actually cause loss of data or functionality.

  To cut a newspaper story short, Backup Service of inventory can be bludgeoned with your regular backup of VC schedule and you should be good.

  References:

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.solutions.doc/GUID-1237EC6E-28E7-49a4-90C8-76AF145DEEC8.html

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.install.doc/GUID-EBB03FB7-F1AE-433C-A78D-A0E345EB0986.html

  http://KB.VMware.com/kb/1023985

  Concerning

  afunnynut

• vCSA vcenter service cannot start

  I use the trial version of the device of the VirtualCenter server in our lab are fine POC development.

  I can get the deployed ovf and the vcenter server has started.

  If I configure the vCSA without changing the hostname, the vcenter service starts and I can access the app from vcenter through VIC, connect my host, etc..

  The problem is when I go to change the host name of the application of vcenter just going down the Hill. The embedded DB cannot update tables, vcenter service will not completely start and the vcenter is inaccessible.

  I tried removing the drive and redeploying a few times now and not can't find a work around for this.

  Any help would be welcome.

  Notes: I used the following forum to help you, what helps me it to certain things.

  http://t.co/QwBqlVaP

  I suggest that configure you the host name and the network before configuring the database.

  For example, see http://jreypo.wordpress.com/2011/11/29/vcenter-server-appliance-part-1-configuration-and-deployment/ for a description.

  André

• Older applications launch Services database

  I have a problem with older applications, which are not yet on my machine, appear when I right-click on a file and choose "open with...". ». From what I can tell that this list is what we call the launch Services database. I can clean with Clean My Mac 3 to rebuild the database, but in a day or so old applications (which as I have said, are not yet installed more) appear again.

  It became a real problem about a week ago when Adobe Lightroom couldn't run Photoshop - I kept getting a weird error message. I posted the problem on several juries of Photoshop which resulted in my uninstall and reinstall several times, until I hit on the idea of rebuild launch services database. That fixed it for a while, but the old version of Photoshop crept into the launch services database and I could no longer run Photoshop of in Lightroom. I did Clean My Mac 3 reconstruction and it has cleared up, but I really want to solve this problem once and for all.

  Don't use software such as "clean my mac"...

  Only uninstall completely.

  The launch services database can be erased with a small Terminal command, you don't need additional software to do this - and beware of any program that wants to 'clean up' or 'protect' your mac, as it is likely to more damage than any good. Some are outright scams.

  If you need a reputable software to adjust the settings not available and to avoid dealing with the Terminal, try Onyx. Free, was there for many years, quickly updated and from a reputable developer.

  Or triple - click the following line (it's a very long single line) to select it, copy and paste into a Terminal window, press ENTER to execute the command.

  /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -kill -r -domain local -domain system -domain user

• vCenter service stopped after failing on DB

  I run vcenter 6.0 on an active/passive cluster of SQL

  When I switched my db from one to the other, vcenter service was stopped. I had to start it manually

  no idea why?

  Yes, that's what says KB, see:

  Set the parameter recoverForAllError to true:

  
  
  true
  
  ...
  

  Note: Add the entry above, if it is not present in vpxd.cfg file.

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• vCenter Service overall health from "yellow" to "red".

  Hello

  Lately, we sometimes receive from operating e-mail alerts manager as the above title has changed from yellow to red, or red to yellow.

  It's strange because nothing seems to be wrong.

  When you look at the details of the alert there is only a mention that we need to check the vCenter management webservice, but this one is running.

  Any idea?

  It's health, reported by VC itself.
  You can check in VI-client: Home-> vCenter Service status

  also, you will see why it is not 'green', and what needs to be fixed.

  The fault will disappear once the health is in the 'green '.

  See attached snapshot of VI-client

• Cannot start abruptly vCenter Service

  Hello

  We have vmWare vSphere Essentials running for a month and all of a sudden it has stopped working on 9/11.  When we try to start the service, a Windows message saying it cannot start the service.

  We bought a new server that meets the requirements of vCenter.  We have vCenter 4.1 running on Windows Server 2008 Standard R2.

  We made the most recent change has been that we have installed the SMTP server feature which required the IIS role must be installed.

  I found the files of huge logs under the "All Users" folder, but I don't know what I'm looking for.

  My first question is where can I find more information about the error and the second what could be the cause of this strange behavior change in vCenter?

  Thanks for any help you can provide,

  Michael

  We made the most recent change has been that we have installed the SMTP server feature which required the IIS role must be installed.

  It is more than likely your problem that IIS will conflict with vCenter. You must stop IIS and your vCenter service can be started successfully

• vCenter Service stops even if it is configured to start automatically

  I have a vCenter Server once they are restarted, the vCenter Service stops and does not restart. He was set to start automatically...

  Where should I look?

  Please take a look at http://kb.vmware.com/kb/1007669 (VMware VirtualCenter Server service does not automatically start after reboot)

  André