vCenter Service stops even if it is configured to start automatically
I have a vCenter Server once they are restarted, the vCenter Service stops and does not restart. He was set to start automatically...
Where should I look?
Please take a look at http://kb.vmware.com/kb/1007669 (VMware VirtualCenter Server service does not automatically start after reboot)
André
Tags: VMware
Similar Questions
-
Hello
I'm under vCenter 5.0 U1 and my database is on a SQL Server 2008 Cluster, use Windows authentication.
Whenever my SQL team switches the server, the vCenter service stops. This causes quite the headache from my backup software requires is configured to retrieve virtual machines via vCenter.
Someone at - he never see cela or know a solution?
THX
Mike
First of all, I would like to point out the race vCenter on Cluster SQL is not fully supported and VMware Support on best efforts basis.
I've seen most of the time a manual intervention is required to start the return services after cluster failover
Check the options for high availability of the server vCenter supported
-
vCenter service stopped after failing on DB
I run vcenter 6.0 on an active/passive cluster of SQL
When I switched my db from one to the other, vcenter service was stopped. I had to start it manually
no idea why?
Yes, that's what says KB, see:
Set the parameter recoverForAllError to true:
true
...
Note: Add the entry above, if it is not present in vpxd.cfg file.
-
VMware vCenter service stops with size of DB SQL errors
Hello
We run VMware vCenter 4.1 with 3 ESX hosts and VMs. 50 vCenter runs on Windows 2008 R2, SQL 2005 Express SP2.
Yesterday, our virtual backup failed, saying: it could not connect to the vCenter agent. When I have looged question, it appeared that he had stopped the vCenter Server service. Upward on the continuation of the investigation, it appears that the SQL Express database had reached 4 GB in size, which is limited, and this caused the vCenter fall service.
I checked some of the forum posts and have accomplished the following:
- Define a retention policy of database for tasks and events, it is initially unchecked, but I checked and set it to 90 days in the beginning and now 30 days.
- Found a script on the VMware forum called VCDB_table_cleanup_MSSQL_V4.X.sql that can clean the database. I put it to delete the old data (change of SET @DELETE_DATA = 1) 90 days and he kidnapped 130 000 + lines.
- Performed a narrowing of the database & file shrink on the data file - I was only 9 MB back?
- Performed a narrowing of the database & file shrink on the log file - it right back a little more, about 100 MB.
- Changed the size of the log file of 460 MB to 1024 MB, in database properties > settings files.
However, even after all of the above, when I reboot the server, or stop and start the service vCenter, the following errors are recorded in the application log:
-------------------------------------------
Log name: Application
Source: MSSQL$ SQLEXP_VIM
Date: 2011-08-16 08:51:44
Event ID: 1827
Task category: (2)
Level: error
Keywords: Classic
User: SYSTEM
Description:
CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size exceeds your limit allowed 4096 MB per database.
-------------------------------------------
Log name: Application
Source: MSSQL$ SQLEXP_VIM
Date: 2011-08-16 08:51:44
Event ID: 1105
Task category: (2)
Level: error
Keywords: Classic
User: SYSTEM
Description:
Could not allocate space for object ' dbo. VPX_BINARY_DATA'. 'PK_VPX_BIN_DATA' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on it to the existing files in the file group.
-------------------------------------------
Log name: Application
Source: VMware VirtualCenter Server
Date: 2011-08-16 08:51:44
Event ID: 1000
Task category: no
Level: error
Keywords: Classic
User: n/a
Description:
The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.If the event is on another computer, the display information had to be saved with the event.
The following information has been included in the event:
[Ldap] Cannot save database backup LDAP data: "ODBC error: (42000) - [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo." VPX_BINARY_DATA'. 'PK_VPX_BIN_DATA' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the file group. "is returned when you run the SQL statement" INSERT INTO VPX_BINARY_DATA VALUES (ROWLOCK) (ID, DATA_TYPE, BIN_DATA, CREATED_TIME, CHANGE_ID) (?,?,?,?,?) ". »
the message resource is present, but the message is not in the string/message table
-------------------------------------------Can anyone provide another solution to this problem? We must be able to perform a successful backup!
For any help or suggestions appreciated!
Ben
Due to the size of the database, the query may take time. I suggest that you let run and just be patient.
Another option is to upgrade to a version of SQL Server 2005/2008 'complete' (see http://kb.vmware.com/kb/7960893), or - where this is an option for you - to migrate towards the currently experimentally supported (starting with vCenter Server 4.1 Update 1) version SQL Express 2008 which supports up to 10 GB per database. (see http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf) Although there are 32 and 64 bit in compatibility matrix, it seems that there are currently problems with 64-bit (see http://kb.vmware.com/kb/1036085)
André
- Define a retention policy of database for tasks and events, it is initially unchecked, but I checked and set it to 90 days in the beginning and now 30 days.
-
I noticed that Windows 7 RTM (all versions, x 86 / x 64) has a bug on its features to Software Installation service which causes updates Windows hang during setup of the system (i.e. Windows is stuck on the message "preparing to configure Windows - do not turn off your computer"). M$ suggests to perform a repair with system restore or re - install the operating system from scratch, but is not an effective solution.
Given that Microsoft has published 5 updates for setup of functionality of software on Vista, I wonder why they don't release a similar patch for Windows 7?
I opened a support to report the problem incident, which probably occurs after installationreliability KB974431 update(Windows6 1 - KB974431 - x 64.msu).
When Windows Update installing KB974431 update , the following error message appear when Windows configures updates after the system restarts and the installation of the update fails with error code ofC004F050 .
Above the error due to the Windows operating system can not pass genuineWindows validation (WGA) . installation of KB974431 will fail if validation fails, or returns a status not valid or not genuine. Here is the procedure to fix it:1. click on Start .
2. in the run box, type cmd and press ENTER.
3. you will see the black command prompt window.
4. enter sfc/scannow
5. If this disable the grace period, it is reset using this code: slmgr /rearm
6. restart your computer.
7. try to update again.Hope this solution helps!
-
Want 4500 Scan to computer cannot be configured to start automatically
In the Envy Series 4500 HP printer Assistant under 'Manage the computer analysis' that one is supposed to be able to click on a checkbox so that the feature is enabled on startup (Windows connect).
However, on my system, this box does not (cannot be verified) and I have to go and click on the button "Activate" on each session when I want to analyze manually. (Windows 7 Home Premium, 64 bit SP1, HP Pavilion dv7 Notebook PC)
Is this a known bug or is me live it? Anyone know what might be wrong or wheather it work around, as an alternative way to start the service?
Kind regards
Mattias
.. Finally managed to do work, and the solution was simple. I only had to start the wizard by using 'Run as administrator' (right-click with the mouse on the icon), and then the desired option is clickable.
Support HP BTW began to ask what version of Windows (by e-mail), I was using - just embarrassing. Well, at least they don't recommend uninstalling all other drivers, wait 30 seconds and reformat the drive.
-
VMware vCenter Server service stops or restarts at the start of data collection
VMware vCenter Server service stops or restarts at the start of data collection
I am using vCenter Server 5.0
Whenever I have begin to collect data, vcenter service stops or restarts, if I stop data collection and to disable the agent, vcenter service again and works well.
Please any help!
Thanks in advance
It is a known issue, relating to the collection of historical data being enabled (nonzero) in the properties of the VMWare Agent on the Agent status screen.
Change to 0 to disable/re-enable the agent and it should fix the problem.
Please open a ticket of level 1 with telephone support if you need more help.
-
VMware vCenter Site Recovery Manager Server services stop auto
SERVER VMWARE VCENTER SITE RECOVERY MANAGER, service stops automatically.
Section of VMware vCenter Site Recovery Manager, pid = 2084, version = 4.0.0 build = build-192921, option = released
[2010-12-19 08:39:33.595 06868 WARNING "App"] Cannot create the writer console
[2010-12-19 08:39:33.611 04220 info "App"] Set of dump dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware vCenter Site Recovery Manager\DumpFiles"
[2010-12-19 08:39:33.611 04220 info "App"] The initialization of the DBManager
[2010-12-19 08:39:33.736 04220 info "App"] Current working directory: C:\Program VMware vCenter Site Recovery Manager\bin
[2010-12-19 08:39:33.736 04220 verbose "ThreadPool"] TaskMax = 10, IoMin = 1, IoMax = 21
[2010-12-19 08:39:33.736 04220 verbose "ThreadPool"] Definition of MTA COM threading model
[2010-12-19 08:39:33.736 04220 info "App"] Try DrExternalRecoveryApi
[2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 0: dr-external-recovery - api dll
[2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 0: C:\Program VMware vCenter Site Recovery Manager\bin\dr-external-recovery-api.dll
[2010-12-19 08:39:33.736 04220 info "App"] Try RecoverySecondary
[2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 1: dr-secondary - recovery.dll
[2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 1: C:\Program VMware vCenter Site Recovery Manager\bin\dr-secondary-recovery.dll
[2010-12-19 08:39:33.736 04220 info "App"] Try SanProvider
[2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 2: dr - san - provider.dll
[2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 2: C:\Program VMware vCenter Site Recovery Manager\bin\dr-san-provider.dll
[2010-12-19 08:39:33.767 04220 'Local' info] Created from the ./locale/ locale subsystem with in default locale.
[2010-12-19 08:39:33.783 04220 info "SrmServiceInstance"] DrExtApi Instance of Service is initialized.Post edited by: a.p. (VMware Community Manager)
Moved to the 'Site Recovery Manager' forum and edited the object line to fix the formatting
While I can't give you a solution, I can share that I had a similar problem with an SRM installation. Like yours, mine was a working facility which, for some strange reason, began to exhibit the same symptoms. Start the service, in a second or two, stopped service.
I opened a ticket with VMware on the issue and in more than three months of back and fourth Exchange with various Tech support I have ever received a satisfactory answer on what caused it. The 'solution' they gave me was to remove the database SQL RS and re - install SRM. This 'solution' has worked, but if this question comes up, I'll probably have to back unpleasant, emphasizing the fact that they solve the problem.
I wish I could be more help, but that's it. I feel your pain.
-
VMware vCenter Server service stops after 1 hour
I'm having a problem with my server vCenter 4.0. Less than an hour of a reboot, the VMware VirtualCenter Server service stops. If I restart it... It works for about an hour, then stops again. The following event is logged in the system event log. The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).
I'm SQL2005 Express is using a virtual machine, windows 2003 Std, 1vCPU, 4 Gb RAM Tomcat and SQL use a lot of memory.
It is a similar problem to the responces you find on google - but not the same thing. My service will stop about an hour after a reboot clean and efficient.
Ideas?
I see that you have conveniently left a crucial part of the document...
The part where is says this (pg 74).
Base Group of 2005Express of Microsoft SQL Server that you can use for small deployments of virtual hosts up to 5 and 50 machines. If the machine has Microsoft SQL Native Client is installed, remove it before installing
vCenter Server with the cluster database.
If the machine has MSXML Core Services 6.0 installed, remove it before installing
vCenter Server with the cluster database. If you are unable to delete using the
Add or remove programs, use the Windows Installer CleanUp utility. See
http://support.microsoft.com/kb/968749.
Microsoft SQL Server 2005 for Microsoft Windows XP, apply MDAC 2.8 SP1 to the client. Use the native SQL
So yes, you have exceeded your environment. Still doesn't tell me if you looked at the SQL Express newspapers, because I'm sure that's the problem.
-
VCenter Server service stopped with the error service special 2 (0x2)
Hello
I installed vCenter Server 2.5 5 update on the WIN2003 SP2 server, but after reboot I get this error:
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7024
Date: 25.09.2009
Time: 09:19:43
User: n/a
Computer: VCSERVER
Description:
The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).
and I can't connect using VMware Infrastructure Client.
Follow the pdf file and you will be fine.
-
Exchange Server 2003 Exchange Services stopped working.
Hello!
I have a Windows SBS (2003), which is my domain controller and Exchange Server (2003) is installed. Arrived on site this morning only to discover that Outlook was not opening. Check the Small Business Server and it was running. However, most of the Exchange Services stopped running:
I tried to restart the services, but they kept not. I even rebooted a couple of times in hopes that I get lucky but luck was not on my side. Here is the error message and the system logs, I got the failure:
Windows could not start the Microsoft Exchange Information Store on the Local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 0-specific error code.
In the system event log:
Source: Service Control Manager
Category: None
The event ID: 7024
Description: The Microsoft Exchange Information Store service stopped with the error special service 0 (0x0).
I also have a couple of events in the Application log:
Source: MSExchangeIS
Category: general
The event ID: 5000
Description: Could not initialize the Microsoft Exchange Information Store service. Failed to initialize security - error 0 x 80004005.
Source: MSExchangeSA
Category: Monitoring
The event ID: 9098
Description: "The analysis MAD thread was unable to read its configuration from the directory service, error ' 0x8007007e".
I tried to uninstall and reinstall the SMTP Protocol, but it did not help. I also watched some wires, but they seem not directly related to my question.
When I tried to start the STMP service, it is to get the error message: failed to start the service SMTP Simple Mail Transfer Protocol () on the Local computer. Error 126: The specified module could not be found.
It's the system log:
Source: Service Control Manager
Category: None
The event ID: 7023
Description: SMTP Simple Mail Transfer Protocol () service terminated with the following error: the specified module could not be found.
The server worked fine the day before and it did nothing for the server that I can recall which will trigger such.
I have TrendMicro Worry Free Business installed on the server but I also exclusion of files/folders to the Exchange folders / file (s). At this setting for a few years and nothing has changed. No update or something has been done since the last time it was running.
Although I have included one or two mistakes, I got messages and logs for all services failed.
Help!
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
The VMware Workstation Server service stopped with service specific error %-1.
Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.
Running on Windows 7 SP1 x 64. The port is set to 7443.
I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.
Thanks for all the ideas, what could be wrong and how to fix it.
Hello
I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.
I have attached the file to this message.
Change of the
section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!). I hope this helps.
Steve
-
the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
Hello
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
and read this information to microsoft:
Error message when you run Windows Defender: «Error 0x800106ba»
http://support.Microsoft.com/kb/931849
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial;
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this program;
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
Print Spooler service stops still.
I am facing a very grim situation, because of the Vista PCs always Printer Spooler service stops. After stopping these services all usury priters hidden and I can't add a printer. Aftet I I restart manually from the services but a few seconds it stops. I got this page from Vista PC. Can anynoe help me to overcome this problem?
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
-
What log the events of
Intel PROSet/Wireless Service has stopped working? Please help me. Hi Tariq.khan,
· Exactly when you receive this error message?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I was able to find a link from the Intel site, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.
[R] Intel PROSet/Wireless event log Service stopped working
http://communities.Intel.com/message/69976
Method 2: I suggest you to check and clean the boot if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.
Let us know if that helps.
Maybe you are looking for
-
Can't audio AirPlay on ATV 3rd generation
In addition to ATV connected to my TV, I have three airport expresses in other rooms. My iPad if I want audio AirPlay, for example music or content of the BBC Radio app, when I 'brush up' from the bottom of the screen and select AirPlay I see my iPad
-
Two issues of music organization associated with iCloud
I recently decided to clean up a bit of my iTunes library and have met with a number of things. I guess pretty basic, but I was not able to find the right keywords to find them in search of these forums, so apologies in advance. First of all, I chos
-
Can I delete this file from iPhoto library?
I'm going through old files and found a library iPhoto 44.7 MB file and it is listed as a photo library migrated under kind in the Finder. I don't know what it is. Can I delete it? Thank you!
-
Compaq presario SR1420NA: power
I can't turn on desktop. Flashing green light on the back. What can I do?
-
HP ENVY 13-d021nd: updated HP ENVY 13-d021nd memory
Hello Perhaps, I would buy HP ENVY 13-d021nd with 4 GB memory. Is it possible to upgrade to 8 GB of memory? It's the last model released in 2015! I found the specs to a PDF from 2009, but I can't find one in 2015? Some critics say that it is possible