vCenter specifies the size of the hard disk

Similar Questions

• the size of my hard disk decreases every time I used tune up utilities

  the size of my hard disk decreases every time I used tune up utilities, then I uninstalled tunup utilities, but on cheking the hard dist, I found that I actually used only 368 168 GB but it demonstrates that only 141 Go free instead of 200 GB, how do I find my free space of hard disk?

  Windows 7 - disk space usage reports

  JDiskReport:
  http://www.jgoodies.com/freeware/JDiskReport/
  Shows the use of the space by folder and also great records list 50.
  This will give you a breakdown of your disk space if you can identify what is using all your disk space.
  (Works in Windows 7, requires that Java is installed: http://www.java.com/en/)

  Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

  J W Stuart: http://www.pagestart.com

• Why the hard disk is divided into partitions of two data (C:Vista and E: Data)?

  I just started a new A200-1V0 and found that disk space is divided into two partitions of sizes equal 'C:Vista' and ' E: Data "(and a small one EISA).

  WHY? What is the logic and purpose? It's not even as if the C:Vista partition is smaller and intended only to the tricks of the 'system' as the root 'Users' (user Documents) is on it also.

  This is the default for Vista (my first use of it), if not, who said that Toshiba could do this without asking me?

  How can I move the root 'Users' in Vista (in the data partition) - if I have two partitions that I might as well use it?

  I can resize partitions in Vista without a utility 3 rd-party (or a complete backup/restore)?

  Thank you

  Hello just YOU

  Please don't be offended because there is no reason for this. You bought the new product with the factory settings. Toshiba and other hardware manufacturer do not know every customer personally and, unfortunately, it was not possible to ask YOU how to set up YOUR laptop.

  Because of this, there is a recovery of product support that allows to configure the HARD disk according to your wishes and needs.

  Please use this DVD and install OS how you want it to be. What recovery procedure starts, you will see CONFIGURATION option on the right side. Click on it and choose the right option.

  Reinstall the OS and enjoy your life. Really, I don't have the time to write on the floors of two partitions, because this is basic stuff and you probably don't want to waste your time to read this.

  Bye and good luck!

• Upgrade the hard disk on Tecra M9 will void the warranty?

  Hello

  I want to upgrade the hard drive on a Tecra M9 120 GB to a 200 GB Hitachi Travelstar 7K 200 hard drive SATA 3 GB/s. The coverage still apply for the Tecra after this upgrade?

  Kind regards

  charlieMOGUL

  Upgrading the HARD drive would not affect the validity of the guarantee.

  But I'm not sure on the size 200 GB HARD drive the BIOS supports a HARD drive size limitation and not all dimensions are supported. If the HARD disk is too big, the BIOS would not recognize the new HARD disc.

  The problem is that Toshiba doesn't provide any information on HARD drive sizes possible.
  I think that you should just look at it

  If you have tested this HARD drive, please report it here in the forum I m very interesting if the 200 GB would run properly.

  Good bye

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• T400 problem booting from the hard disk, blinking cursor on the top left corner of the screen

  I have problems with T400 (2765-TDG). He struggled with the Setup, which requires power 5 minutes/disable to propely operating system boot.

  Computer laptop is less than two months, entirely properly the driver being up-to-date, then after that, nothing's been done about it to user or system administrator. Problem occurred suddenly after two weeks of mentioned maintenance.

  Symptoms:

  • After initialization of the mouse, screen goes black, and the upper left corner white cursor starts to Flash
  • There is no key keyb which can contine begin the process, wait for the reboot
  • There is no other device connected to the laptop, even mouse not
  • We have several, sometimes 3-4, sometimes even 10 times, to restart with the power button in order to get the boot of the operating system
  • When he is successful, just before the start of the operating system, the boot in diagnostic mode to start (with fast start disabled) I can hear only a single beep

  What I tried to do:

  • I changed the BIOS setting to force booting only from hard drive, cut off from any other starting device.
  • Also, changed from AHCI mode to compatibility for hard drive, but without help.
  • Turned off the coast of quick start, but during the startup process, there is no specific error indicated
  • Updated version of BIOS to 2.03 - 1.01 but with no help
  • Restored the default BIOS, no help

  Done some diagnostics generals, and here is what I noticed:

  • After changing the settings in the BIOS, save & exit, the computer hangs with a black screen. I have to turn off and on in order to continue the initialization. The settings in the BIOS are registered correctly.
  • When I was able to boot into the operating system (XP), graphics card sometimes is not recognized, not even by the original driver installation. In Device Manager, I have two graphics card drivers recognized traffic sign with "Intel management engine interface" device with warning sign
  • In Event Viewer, and then only error line is "Problem with HECI driver communicating with firmware" or something like that
  • Operating system is not able to enter in standby mode, it justshows white screen and I have to turn off the laptop by pressing the off button longer

  Any help appreciated. Thank you! I hope I can cope with this before I send laptop to the authorized service.

  Vedran

  I'm sorry to tell you, but in case, can I had to send laptop to the authorized service provider. They replaced the motherboard and the hard disk (!). Now, everything works fine, but puts shame on Thinkpad T series notebook.

• Try to migrate from the hard disk for ssd drive

  Hello, 4 days ago I bought dell inspiron with windows 8.1 5748 and a 1 TB hard drive.

  I also bought samsung 250 GB of ssd drive 840EVO to replace the disk of 1 TB of the laptop. I cloned the HARD disk drive and restored the image in the ssd drive and when I mounted the SDS disc and shot to the top of the laptop I got an error that it cannot detect a drive... Press F2 to enter setup F5 for diagnostics and F1 to reboot.

  First I made sure to rise properly. After I checked I entered the bios where I noticed that the drive is recognized in the details of the system. The model was correct, the capasity as well. Fashion was ahci.

  I ran the diagnostics and they couldn't locate a drive.

  So, is this an incompatibility? I checked for updates to the bios and I see I m to date on that. The player is surelly ok as I have tested on another pc...

  What can I do?

  Thanks in advance!

  Hi Add1ctiv3,

  We recommend that you use the recovery disks that are you ready when you got your system to restore the image of the original on the SSD hard drive. Since they have the same size, it should work without problem.

• How do you know if the hard disk controller is damaged or it does not work?

  Hello

  I would like to know how you can know if the hard disk controller is defect.  is there some tools for it or a way to test it.

  I have thouthg my self for a solution like this;

  -If I take the hard drive that is not working out pc and attach it to the speaker and the speaker set on a PC then I wil first hear the rotation of your drive hard so that when the PC wil recognizes the external hard drive as a hard disk and then the controller is OK, otherwise it means that the controller is damaged.

  . I know mechanical problems with a hard disk, they do some sounds when they turn.

  is the way I think it is the right way to know or there is much better way to find out if there is a problem with the hard disk controller.

  Thank you

  Johan

  Small circuit board is an interface for cables that sorts what is happening in the place where. It holds the drive buffer and it tells the computer what it is, i.e. drive, speed, brand, model, size etc.

  If you get an error of hard disk controller, it's a motherboard problem and there is no way to fix it.

  Hard drives fail for two reasons...

  1. The platters inside are deteriorating to the point where they are no more able to maintain the structure of the sector/cluster.
  2. The spindle motor breaks down.

  The part of a disk hard less likely to fail is the interface card, unless he is accidentally cut on the computer case or other metallic surface. If this short, you will know that the smoke resulting hard disk is acrid beggars belief. It is almost the only case where the interface will fail.

  Even when a hard drive is subjected to temperatures beyond its limits, the spindle motor bearings will fail way before anything else, that's why the vast majority of the disk hard total fails is obvious because there is no vibration of the engine.

  If a hard drive starts to cause problems, it is best to replace it because it will always get worse over time...

• Capacity of the hard disk for NX9030

  Hello

  I have a laptop HP Compaq NX9030. The hard disk starts to show errors so I intend to replace it. Does anyone know if the laptop has a limited capacity for replacement hard drives?

  Thank you

  Dave

  You have the Intel 855 chipset. In order to launch a hard drive larger than 137 GB, you need help for 48-bit Large Block Addressing in the chipset, BIOS and operating system. I find contradictory information on the ability of the chipset 855 doing of 48bits LBA. I also wonder if ever taken HP worth of produce a BIOS that would make 48 bit LBA in this model being the biggest hard drive offered 60 gigs. In other words, I think you should assume 120 GB is size max hard drive you can use and the only way I can think to prove otherwise is to buy the largest disk and install it. Windows XP Sp1a and superior does not large drives.

• Increase the capacity of the hard disk for VM

  Hello

  I use ESX 4.0 with vSphere 4.0.

  When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.

  What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?

  There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.

  André

• Remove stranded files from the hard disk to the VM package

  I have a virtual merger machine that is now 96 GB in size (database development) and it contains several virtual hard drives.  Now, I have cleared one of the drives on and outsourced (he placed on an external Firewire based drive).  Removing the abandoned drive does not reduce the size of the virtual machine.  Research in the VM package, I see that the hard disk file (vmdk) is always inside the package and using 54 GB.

  The question is so I can delete these files from the VM package or it will damage the VM?  I tried to make a backup of the VM, but right at the end that it maintains the production of an error so I would like to know if anyone has experience with this before making the jump.

  Removing a virtual drive simply deletes the references, it does not delete the virtual disk. If you do not have a snapshot (for example), it is safe to delete. Make sure get you the right one, well - I recommend you all first move somewhere else and then try to start the virtual machine. If it is used at the moment (but maybe not if it is only used by a snapshot), merge will complain.

• How can I access the hard disk in a satellite A30?

  I just bought a new hard drive and were surprised by the lack of information on the internet with the help to access the hard disk. Help, please. I have the satellite a30-203. Thank you, Daniel Short

  Hello Daniel,.
  location of the HARD drive is down just under the CD-RW/DVD device.

• Why the HARD disk is partitioned into C & D on Satellite Pro C partition

  Why the HARD drive is divided and how to use it?

  It is important that the one that I use?
  It turns into one big disk?

  The manual says nothing about this.

  Thanks for any help

  Ken

  Hello

  The HARD disk is partitioned and contains two partitions. The C partition is the system partition that contains the Windows operating system. The second D partition contains data drive HARD recovery.
  HARD drive recovery allows you to establish the notebook back to factory settings without the recovery disk usage.

  But it s is strongly recommended to create the recovery disk! The user manual provides the info on that in case something goes wrong with the HARD drive, the recovery disk allows you to recover the laptop.

  Of course, you can delete the D partition if you want to, but before doing so, you must create the recovery disk.

  However, my HARD drive contains 3 partitions. I created an extra. In my case, the C partition contains only system and the unique software. My files private like Mp3, movies, etc. are placed on the D second partition).
  The third partition (E) contains a folder with games.

• Satellite L450 - how do you start the recovery from the HARD disk?

  Hello world

  I just joined the forum and already I need help.

  I have 2 questions (10) I'm an ODP, and I volunteer for a local blind group who all have laptops and rewrite the textbooks in braille users. Now a desire to know how start recovery from the HARD disk drive and what you should do disks for this.

  and (2) another received a laptop computer Toshiba A 100 and it does not start as soon as the Toshiba screen appears it lacks a password, we tried all kinds of passwords, tails of start and a new record of program but it does not start. Can anyone help please.

  Ken

  For instructions how to recover a Toshiba laptop with verification of HARD drive recovery procedure please this document > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  The Satellite A100, I presume that you need BIOS password. Unfortunately, there is nothing you can do about it. Accredited maintainer Toshiba can remove the password for you.

• Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

  Hello

  Spilled water on the keyboard. Laptop has stopped working.
  Dried, but did not recognize the HDD start up and HDD does not Set - up.
  Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
  Is there an easy way to find and repair the defective HARD drive slot?

  Thanks for any help.

  PK

  Hello

  The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
  The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

  New motherboard would cost a small fortune he of not good about market 350Euros
  That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

  This is my personal opinion...

• Impossible to 'System' to defrag Portion of the hard disk on Windows 7 Pro or Windows 8 Pro dvt7-3000

  I have a laptop HP Pavilion dvt7-3000 CTO that has a single disk drive hard 500 GB.  The operating system has been improved in Windows7 Pro (64-bit) to Windows 8 Pro (64-bit), but the problem occurs in both operating systems.  When conducting the defragmentation of the different hard disks (C:\ D:\, HP tools and system), the percent of the "System" drive which is fragmented never changes, while the % fragmented adequately for other readers going to 0%.  Over time, the system part of the hard disk rose to 27% fragmented.  How to defragment this drive?

  Hello

  The system partition contains the boot files and recovery for Windows 7 environment and should not be défragmentée.  It will always appear to be fragmented and it is quite normal - force this partition defragment would almost certainly avoid the Windows startup.  In addition, the fragmentation in this small partition has absolutely no effect on performance.

  For much the same reasons, the recovery partitions or HP_TOOLS must be défragmentées.

  Kind regards

  DP - K