vCenter Update to 5.5U2 to 5.5U3D - SSL issues?

Similar Questions

• vCenter Update Manager install confusion

  I'm finally getting around to installing vCenter Update Manager for our environment vSphere 4.1, but I'm having a nightmare of a time to settle.  VCenter is installed on a Windows 2008 R2 64-bit server, my SQL box is MS SQL 2005 installed on an old Windows 2003 64-bit server.

  Went in several circles between SQL 32 bit DSN, ODBC 64-bit drivers and the unauthorized download service must be installed on the same server as the Update Manager.  When you run the installation on my vCenter server, I get the following message:

  The vCenter Server is incompatible with the VMware vCenter Update Manager you install.  Please select a compatible Server vCenter.

  At this point I don't yet really if I get it to talk to our SQL Server or not.  I want just the installed software.  If anyone knows what's the magic combination to get everything going, I would really appreciate the info.

  hope that the 4.1 version of the vCenter server. In this case, if the version of the 4.1 Update Manager must be installed with the hassle. If the server vCeneter is 4.1 and Manager Update 41U1/U2, then installation will fail with the above error. 41U1 is not comaptible with 41 VC. Please refer to the software compatibility guide. http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF

• VUM - vCenter Update/upgrade to level host w/o vMotion?

  We hab a laboratory and the environment in which we would like to test vCenter Update Manager. We have Crossover installed on vCenter-VM.

  A fundamental question is whether you can update/upgrade to level the host that runs the vCenter-VM and without vMotion. I would tend to say no if a patch requires the host in maintenance mode, but perhaps that staging feature a more differentiated response.

  I'm curious of your answers

  A fundamental question is whether you can update/upgrade to level the host that runs the vCenter-VM and vMotion

  That's right, you can not switch from a host using VUM if you vCenter VM resides on that host.  If you do not you can do a few things of vMotion.  Take note of your vCenter VM and host running the VM vCenter datastore.  Then connect directly to the host where your vCenter VM, it turns off, remove the inventory.  Then open a session on a different host, browse the data store and add the vCenter VM inventory and turn on.

  Once the vCenter THAT VM is powered on a different host, you can patch the other host using AUVS.  Otherwise you have to patch the host as a stand-alone host.

• vCenter Update Manager 4.1

  I'm sorry for the silly question, but I'm at my wits end, trying to find the installer for Update Manager 4.1

  
  I am running 4.0 ESXi and vSphere 4.0 and I'm trying to update the hosts to ESXi 4.1 using the Update Manager, but it seems that I can't do it until I update the server vCenter Update Manager 4.1. I believe that I have improved vCenter successfully, but I understand that I will not be able to actually run the 4.1 client until I have a crowd of 4.1 running. :/

  Can someone please provide the link to download Update Manager 4.1 extension?

  Thank you

  VUM is provided with/in the media of vCenter.

• 4.1 - > 4.1 U1: vCenter update first and ESXi hosts later?

  Hello

  About the update 4.1 4.1 U1, y at - it order to follow?

  1 vSphere client

  2 vCenter & update manager

  3 ESXi hosts

  Thank you.

  It is always advisable to update vCenter Server before upgrading anything else.

  1 vCenter Server

  2. Update Manager

  3. the Client vSphere + new Update Manager Plugin

  4. the host ESX (i)

  André

• vCenter Update Manager license question

  What VCenter update Manager licensed separately vcenter Server, or is it included?

  Thank you!

  VUM is included in the vCenter license in all versions, for more details, take a look at the vSphere Editions - http://www.vmware.com/products/vsphere/buy/editions_comparison.html

• VMware vCenter Update Manager had an unknown error.

  Get the following error below

  Scan feature

  xxxxxxxxxxxxxxx

  VMware vCenter Update Manager had a

  unknown error. Check the tasks and events

  tab and the logs for more details.

  xxxxxxxxxxxxxxx

  xxxxxxxxxxxx

  27/09/2010 08:22:21

  27/09/2010 08:22:21

  27/09/2010 08:22:22

  check my logs in yum

  Leave validate. For integrity.ComplianceStatusManager.queryEntityComplianceStatus on the target: Integrity.ComplianceStatusMgr

  QueryEntityComplianceStatus called by the client on the entity: field-c61

  reference ID: 6

  reference ID: 10

  reference ID: 13

  more information to the db reference level

  total elapsed for BaselineGroup::FetchAllBaselineGroupsWithBaselines = 0 msec

  has acquired the lock and get the base lines for 5 entities

  get the base lines for entity: host-162

  get the base lines for entity: host-202

  get the base lines for entity: host-217

  get the base lines for entity: host-326

  get the base lines for entity: host-396

  of EntityBaselinesMap = 2

  Baselines Patch attach information.

  entity: host-162 base lines: 6

  entity: host-202 base lines: 6, 10

  Base upgrade lines attach information.

  entity: host-202 reference: 13

  for VciUtilities::GetAllApplicableBaselines total elapsed time = 15 ms

  SQL execution failed: {CALL vci_queryEntityBLStatus (?,?,?)}

  Link parameters:

  data type: 1 size: 4datatype: size INT32: 4Value: 1

  data type: 1 size: 4datatype: size INT32: 4Value: 0

  data type: 1 size: 4datatype: size INT32: 4Value: 0

  "ODBC error: (42000) - [http://SQL Server Native Client 10.0 | ]. http://SQL Server Native Client 10.0] [SQL Server] Cannot resolve the conflict of classification between "SQL_Latin1_General_CP1_CI_AS" and "SQL_Latin1_General_CP437_CI_AS" equal to operation. "is returned when you run the SQL statement" {CALL vci_queryEntityBLStatus (?,?,?)} ". »

  Throw vim.fault.DatabaseError

  Result:

  {(vim.fault.DatabaseError)

  dynamicType =,

  faultCause = (vmodl. NULL in MethodFault),

  MSG = ""

  }

  The number of tasks: 0

  The number of tasks: 0

  The number of tasks: 0

  The number of tasks: 0

  The number of tasks: 0

  Recall of clock on-demand task manager internal...

  InvokeCallbacks. Total number of reminders: 7

  End of reminder timer Task Manager to the domestic demand of this slice of timer... Rescheduling after 300000000 microseconds

  Free space of the disk store Patch is: 23355469824

  Free space of the disk temp directory is: 23355469824

  VMware Update Manager Web Server is green

  VMware Remote Device Server is green

  The number of tasks: 0

  any idea here? My odbc connection is fine. The db has been updated when I installed the new update manager and improved db

  This error is a little disturbing.

  complianceStatusMgr, 1108 "ODBC error: (42000) - Microsofthttp://SQL Server Native Client 10.0SQL ServerCannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "SQL_Latin1_General_CP437_CI_AS" in the equal to operation." is returned when executing SQL statement "{CALL vci_queryEntityBLStatus(?, ?, ?)}"
  

  According to the thread below, who doesn't have a lot of information, such as the resettlement of VUM, with a fresh DB can solve the problem.

  http://communities.VMware.com/thread/276351

• vCenter update manager install - vcenter server isn't compatible?

  I try to install vcenter update manager.  I tried the two 4.0 update 1 and 4.0 Update 2.  Both give me an error in the first step of the installation when I specify our vcenter server, port, username, etc.  He states:

  "vcenter server is incompatible with the vmware vcenter update manager that you are installing.

  We run vcenter 4.1.0 (build 258902).  I can't find any information on this error.  Was hoping to find an answer here before opening a SR with vmware.

  If you use vCenter 4.1, you must install VUM 4.1, which can be located on the vCenter installation CD in the folder updateManager.  VCenter is a 64-bit application, VUM is not and still requires a 32-bit DSN.

• VMware vCenter Update Manager Client installation fails

  I have a system that has been upgraded to ESX 3.5 to vSphere and installed successfully the vSphere Client, can see my hosts and virtual machines without any problem.  I install the plugin VM converter, but when I try to install the plugin Update Manager it fails every time.

  I'm installing on a 64-bit Windows 7 computer (my laptop is also Win7 64 bit and it installed successfully there).  I tried to install the application and get the error message in the Windows application logs:

  Product: VMware vCenter Update Manager Client - Setup cannot continue. VMware vSphere Client is not found to be installed on this computer. VMware vCenter Update Manager Client can be installed only on machines where VMware vSphere Client is present.

  I've already entered my store of % TEMP % and tried to install just the exe file (VMware - UMClient.exe) and who is not, I copied the extracted files, including all the files .ini, .bmp, .msi and .mst to the root of my C drive and tried installing from there.  All this provided the same failure.

  During the installation, I get this message first indicating the location of my vSphere Client installation:

  

  When I click on the only 'real' installation option, then spend a few seconds and then I get this message:

  Click ok and then get a message saying that the installation has failed.

  I managed to do install finally.

  The strange solution was that I had to log on as an administrator of my machine and then install the plugin.  Even if my account is an administrator account.

  Anyway, problem solved, works perfectly and am clean now.

• I cann't vcenter update manager...

  Hi all

  I have 4 standard installed on Win2K3 server vcenter. I see no option for vcenter update manager under plugins installed or available in the plugin Manager. How to do it?

  have you installed VUM?  It is not installed by default.  I do not have the beam ISO vcenter in front of me, but if you browse the ISO/DVD you will find a folder Update Manager.

  We usually install VUM on a separate virtual computer and create a new instance of the DB, but it can be shared with your VCDB if you need to

  http://www.VMware.com/support/pubs/vum_pubs.html

• Passage of 3.5u3 in vSphere4 - Question on vCenter Update Manager

  Morning all,

  We watch move from 3.5u3 to 4 and have never installed vCenter Update Manager (updates manual favorite).

  Reading upgrade procedures he explains how we can improve the cluster (5 esx servers) to 4 using the Update Manager.

  I was wondering which is the best way to go (the upgrade will not place outside office hours so no confusing our users)

  (1) install Update Manager (relevant version for 3.5u3) now (this allows us to provide fully functional)

  (2) install the Update Manager (version 3.5u3) on Saturday morning, just before the upgrade

  (3) install Update Manager v4 (new now allowing time to test)

  (4) install Update Manager v4 on Saturday morning, just before the upgrade

  The reason to ask, I have very little knowledge of the update manager and the last thing I really want is ad-hoc updates applied (as the updates of windows). I'm guessing the number 3 is the best option in this way I can test and have fully functional before necessary - but prefer to get the opinion of those who could have a better understanding.

  TIA

  MadAsToast

  Use vCenter Server 4.0 (U1) and the new AUVS.

  See also: http://www.vmware.com/products/vsphere/upgrade-center/upgrade.html

  André

• vcenter update

  I'm about to update vcenter Update 2.5 4...

  Everything started with this company, do not know the old layout...

  He asks me to connect to the existing DB server or to install express sql05...

  I don't know what they chose before, I think just install sql such as recommended, but don't want to blow all the current cluster settings etc...

  It specified UPGRADE by choosing options to install...

  It will blow it if I choose to install express sql05?

  Thanks for any help.

  The DB can be on another server.  Check your ODBC settings.  However, you will need to know the DB password if you are that it points to an existing DB

• I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers?

  I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers

  ?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (143315)

• 5.5U1 to 5.5U2 vCenter update

  Does anyone know the steps of updating 5.5U1 to 5.5U2 in a simple no install environment (WebClient, 1XSSO, 1xVC of separate servers & INV, 1XSQL)?

  What is as drastic as a version upgrade?

  KB below would help to start your upgrade

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2053130

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2053132

  5.5U1 to 5.5U2 update is a minor update that does not include the many steps as the major update. Your environment is distributed, we must run the individual Installer and update in order as - IS, VC, WebClient and SSO

• 6 6 Update 1 vCenter update

  I can't update vCenter 6

  I installed VMware vCenter Server Appliance 6. So I try udate vcenter 6 Update 1.

  Gendarmerie:

  VMware-vCenter-Server-Appliance-6.0.0.5120-2800573-patch-FP.iso

  
  Connect to the console:

  
  Login as: root
  VMware vCenter Server Appliance 6.0.0.10000
  Type: vCenter Server with an embedded controller Services Platform
  Keyboard-interactive authentication.

  Password:

  Last login: Tuesday, January 5, 22:08:22 UTC 2016 10.0.0.210 on pts/0

  Last login: Tuesday, January 5, 22:28:27 2016 of 10.0.0.210

  Connected to the service
  * API: 'api help list.

  * List of Plugins: «help list pi»

  Allow to access BASH: "shell.set - active True."

  * Launch BASH: "shell."
  Command > firmware install iso - acceptEulas

  [2016 01-05 T 22: 28:30.005]: staging of packages of software patches of ISO

  [2016 01-05 T 22: 28:30.005]: ISO mounted with success

  [2016 01-05 T 22: 28:30.005]: check the staging area

  [2016 01-05 T 22: 28:31.005]: running pre - stage.py

  [2016 01-05 T 22: 28:31.005]: payload validation update software

  [2016 01-05 T 22: 28:31.005]: Validation successful

  [2016-01-05 22:28:31, 650]: treatment of software update payload packets 54/54

  [2016 01-05 T 22: 28:32.005]: (3) staged with success packages

  [2016-01-05 22:28:32, 028]: package 3/3 copy software

  [2016-01-05 22:28:32, 123]: duration test transaction...

  [2016 01-05 T 22: 28:33.005]: installation process failed

  [2016 01-05 T 22: 28:33.005]: ISO unmounted successfully

  Command >
  

  What it can be?

  The hotfix mentioned in your message (VMware-vCenter-Server-Appliance-6.0.0.5120-2800573-patch-FP.iso) is not one for "vCSA 6.0 Update 1 b", but for "vCSA 6. 0 b "(sans mise à jour 1)." The ISO image patch for 'vCSA update 1 b' is 'VMware-vCenter-Server-Appliance-6.0.0.10200-3343022-patch-FP.iso '.

  André