vCenter Virtual Appliance - Autodeploy Service Autostart

Similar Questions

• vSphere Client reports an incorrect version of vCenter Virtual Appliance

  vSphere Client 5.5 reports incorrect version of vCenter 5.5 Virtual Appliance. For example, vCVA build is 1891314, but in vSphere Client 5.5 GUI shows like 1891313 or vCVA build is 2170515 (last U2a), but in vSphere Client 5.5 GUI shows as 2001466

  I've updated the client to the latest version 1993072, but it made no difference.

  Any suggestions are appreciated.

  Thank you

  Slawek

  This is a bug according to the support for VMware.

• Regarding the hosts took max supported on Vcenter Virtual Appliance 5.0

  http://www.VMware.com/PDF/vsphere5/R50/vSphere-50-configuration-maximums.PDF

  Maximum config guide indicates that vsphere 5.0 supports the hosts of 1000 per VC. The same applies to the virtual appliance thus (on an external Oracle DB... not the one internal)

  Concerning

  Girish

  The same should apply to the device when you use an external database. But with several guests it would be wise to take the same settings with the Windows version of vCenter, which means increase the memory of tomcat and adding vCPUs additional and resources of the virtual machine RAM.

• vCenter virtual appliance Installation on shared storage

  Hello

  I'll start testing virtualization soon, and for storage, I'll use a Synology NAS DS212j. My goal is to create a cluster with two servers ESXi, with the virtual machines stored on the NAS.

  My question is should I plug my nas iSCSI on my ESXi and then deploy the model to the OVA of the appliance virtual vcenter or deploy the eggs on the physical storage of one of my ESXi and then I try it moved to the shared storage?

  I'm not sure if my question is simple, but thank you for your answer!

  C. N.

  Happy, I can help you

  You must configure the iSCSI conifguration for each host, Yes.

  But the second and all other guests later then analyze the map iSCSI and see the VMFS data store that you created with the first host and set up automatically.

  You don't need to add each host in the cluster even if. You only do that when you want to use functions such as HA and DRS on the hosts within the cluster.

  Tim

• vCenter Virtual Appliance - deploy servers through templates

  I have installed ESXi5 and I deployed the vCenter via the OVF. This forum works without any problem. However, I would like to clone a templete for future creations of VM virtual machine. However, I get the message warning 'customization windows resources are found on the server. On Server 2008 R2 I would just download the sysprep files relevant to the specified locations, however using the OVF I can't find the right place to put the files.

  Please can someone advise the use of models and cloning in Version 5 of ESXi, when you use the vCenter via the OVF.

  Kind regards

  Skynite.

  You must download the sysprep on the vCenter device files, the path is/etc/vmware-vpx/sysprep.

• vCenter 5.5 Virtual Appliance and SSL certificates

  I currently have vCenter 5.5 under Windows 2008 R2.  I've been thinking to replace my Windows with the appliance vCenter vCenter virtual.

  I have read the documentation on the SSL certificates for vCenter.  I bought a RapidSSL SSL certificate on my current server vCenter.  It seems that everything is working correctly, but the documentation I read says I need a different cert for various services such as inventory, Journal browser and AutoDeploy Service.

  VCenter requires there really that many different certificates?

  Yes, each component of vCenter server requires unique SSL certificate:

  Reference:http://www.vmware.com/files/pdf/techpaper/vsp_51_vcserver_esxi_certificates.pdf

  See also: http://pubs.vmware.com/vsphere-55/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-55-security-guide.pdf

• Nexus 1010 Services Virtual Appliance and VN-link hardware

  All,

  We deploy the Nexus 1010 Virtual Appliance service in order to use the analysis network (NAM) Module.  The 1010 necessary hosted of the MSM to deploy the 1000v switch into ESX.  We would also use VN-Link in the material by which we "get around" the virtual switch and use the 6120's for switching.  What I need to know, it's possible the 1010 always to analyze network traffic using hardware VN-link?  Hardware VN-link does not seem to need a VSM, so I think that the 1010 cannot monitor traffic because there is no "attach" to 1000v.  Anyone can shed some light on this?

  Kind regards

  Ken

  Ken

  The NAM module present in the 1010 is not exclusive for Nexus1000v traffic.

  Its there as part of a device which is be the VSM (1000v) and is set on its own.

  If you look at the Nexus1000v, the VSM (which is the 1010 and holds the NAM in this case) is * not * part of the VM data path.

  He's wanted for initial virtual port instantiations (veth) but after that the traffic does not go through it.

  So to send data traffic VM to the NAM module for analysis, another mechanism (such as ERSPAN) is used to route the data traffic of the VM is to her.

  The Nexus 1000v support ERSPAN.

  Same logic applies you have a NAM module-the 1000v can send traffic to it through ERSPAN.

  Looking to VN-link in hardware - there a MSM which is the INSTITUTION itself.

  In this case, the veth is on FI.

  If the FI did support ERSPAN (which is not currently), you can use the same NAM module or any other module of NAM for sending traffic to it.

  If this isn't a limitation of VN-link in hw methodology vs 1000v switching switching, but the fact that the FI does not yet support a mechanism of 'export '.

  I hope it helps

  Thank you

  -Matt

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• VMware vCenter Server Appliance 5.1 is not Autostart cluster

  Problem:

  After a VMware vCenter Server Appliance failure does not start automatecly.

  I have configured to start automatecly to each host, but it does not start automatecly.

  My configuration:

  Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running

  -3 x VMware ESXi 5.1.0 (799733)

  -1 x VMware vCenter Server Appliance 5.1

  -Servers run as a cluster with HA.

  Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).

  André

• vSphere 5 vcenter server download virtual appliance

  Hello

  can a peovide a link to download vsphere 5 vcenter server virtual appliance... for use of the lab environment.

  I think that you need a valid SnS use of vCenter.  That said, it can be downloaded from

  http://downloads.VMware.com/d/details/VC50/dHRAYnQldEBiZHBqcA==

• Error 1067 by starting the VMware Virtual Center Server service after the upgrade to VCenter 4.1

  I've started with VCenter 4.0 update online success in 4.1u1

  but now I can not start the service with Error 1067 by starting the VMware Virtual Center Server service.

  I did the upgrade online in VCenter 4.1u1 with this iso file VMware-VIMSetup-all - 4.1.0 - 345042.iso and now the entire production is declining.

  I use SQL Server 2005 32-bit as the database.

  Any kind of help would be greatly appreciated please?

  I guess it's all true by:

  http://KB.VMware.com/kb/1022104

  http://www.VMware.com/support/vSphere4/doc/vsp_vc41_u1_rel_notes.html

  And what exactly is a failure, is the DB on a different server or living on the vCenter Server?

• Run a Virtual Appliance on a vCloud Director 5.5 VDC/vApp

  I want to deploy a Sonicwall Email Security Virtual Appliance (VA) in a vCloud Director 5.5 VDC/vApp.  The VA is in OVA format.  How do you do this in Director vCloud?  I tried to import the VA using vSphere importing, but is does not appear as a selection.

  Thanks for the detailed info Alan.

  2014-12-08 23:14:53, 309 | WARN | backend-activity-pool-237 | VAppUploadManagerImpl | Transfer session: 91f2a458-f5b5-c 451-835-bec280e4165f. Error during downloading content: folder 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) does not exist in our inventory, but vCenter Server claims it does. | VCD=939f2481-9f68-4a39-a0a3-769fc9387b15,Task=65ad7396-5084-4E51-941a-a9f4abcdc657 activity = urn: uuid:65ad7396-5084-4e51-941a-a9f4abcdc657

  com.vmware.ssdc.util.LMException: 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) folder does not exist in our inventory, but vCenter Server claims it does.

  at com.vmware.vcloud.val.internal.impl.VC20VirtualEngine.waitForFolderInInventory(VC20VirtualEngine.java:2102)

  at com.vmware.vcloud.val.internal.impl.FolderUtil.createFolderIfNotAlreadyExist(FolderUtil.java:142)

  Can you please check if the vCD vCenter proxy running.

  Please see the links below.

  Cannot create the VAPP to vCloud 5.1

  http://www.Boche.net/blog/index.php/2011/12/16/vCloud-Director-and-vCenter-proxy-service-failure/

  vCenter | Tom Fojta & #039; s Blog

• How to change the config of vCenter Server Appliance (5.5) ESXi host vm? [Solved]

  I want to enable (set to true) memoryHotAddEnabled and cpuHotAddEnabled on the vCenter Server Appliance.

  I can't the powerCLI user because he needs a vCenter Server Appliance to connect to (right?) and to allow HotAdd of the virtual machine must be turned off.

  For anyone wondering, the best way to do this is to connect the ESXi host via vSphere Client, turn off the VM vCenter and update the configuration in this way.

• password for vSphere virtual Appliance 6.0?

  Hello

  I want to install vSphere 6.0 and I would use the appliance virtual vSphere.

  I have deployed ""VCHG_Appliance_SLES11 - 6.0.0.0 - 2564774_OVF10.ova ' in a segment of a network that has no DHCP "

  (During the deployment of the EGGS, I'm not prompted to create a password)

  When starting the machine, he gets no (no DHCP) IP address and he invites me to connect manually configure the network

  PROBLEM: what is the default password for the appliance 6.0.

  I tried the following:

  -user name: root, admin, administrator, vmware
  -pw: the default admin

  tips are greatly appreciated,

  Chris
  

  

  You have deployed the wrong package, since VCHG is not the vCenter Server Appliance, but the evolution of the management of Multi-hypervisor (MHM). To deploy vCSA, you must download the following package: VMware-VCSA-all - 6.0.0 - 2656757.iso

• VCac fails to VCO registerVirtualMachineRequest 'Import vCenter Virtual Machine'

  VCac Ver 6.1

  VCO worm 5.5.2

  VCac 6.1.0.2040915 Plugin

  
  Hi all

  I have an external VCO device configuration and Vcac. I am under some test workflow to get the clones of a virtual machine, and then import it into Vcac so that its life cycle is managed. I'm at the stage where I just test of VCO with the out-of-box plugin workflows. I am able to run a workflow to modify the Vcac without any problem. When I run a workflow 'import Vcenter Virtual Machine' in VCO workflow is completed successfully, but the machine is never added to Vcac. I see these messages below in my journal Vcac. Where it says (my username), this is the value of the user of the identity when I run the workflow. I have admin tenant and tissue rights. What is the purpose of this user identity? I can leave the field blank and always get the same answer, he'll just be blank where is the user name.

  (My username) System.ApplicationException: Access denied to the DynamicOps.VMPS.Security.AuthorizationService.CheckAccess (IdentityToken token, try to String, String group, String tenantId) at DynamicOps.VMPS.Service.ProvisionService.RegisterExistingVirtualMachine (IdentityToken identityToken, Guid virtualMachineID, Guid hostReservationID, Guid hostStorageReservationID, Guid virtualMachineTemplateID, owner of the chain)

  Workflow "RegisterVirtualMachineRequest" failed with the following exception: object reference not set to an instance of an object.

  Any help would be appreciated,

  Chris

  Sean,

  I just got this work, thank you for the business group index. It turns out that my user identity must be qualified full [email protected] to work because our SSO keys out of our ad.

  Thank you

  Chris