vCloud connector - cannot copy VAPP vCloud Director to vSphere

Similar Questions

• vCloud connector 2.5 - copy the model of vSphere to vCloud Director fails

  Hi all

  I'm trying to make a copy of the model of the private Cloud for vSphere (e.g. my instance of vCenter lab) the vCloud Director private cloud (my instance vCD lab, which is deployed and registered with the same instance of vCenter mentioned above) with vCloud connector 2.5.

  I have deployed the server component of vCC, configured and deployed two nodes of vCC - a to connect to vCenter for private cloud config vSphere and another to connect to the vCloud Director org for the basic cloud vCD config private. Moreover, the vCloud Director is registered to the same instance of vCenter which is used for vSphere cloud.

  I then tried to open a copy of the model from the vSphere cloud node to the node of vCD. The task to export the OVF template will start, and the task of SCR plugin will also display the copy task. This vCD instance also model any TIME if you go to the properties of the VDC organization selected during the SCR copy Wizard.

  After about 18%, the percentage remains stuck there for a little bit before the 'Export OVF Template"task fails with"Operation timed out ". After that, the task indicated in the vCC plugin will fail also later with (OVF Export failed. Null message) and the import of VAPP model in vCD job will fail also - VAPP failure will take upward of space inside the affected storage however profile until I have manually remove the failing through vCD VAPP model object.

  Anyone else having this problem? I've seen this problem on both environments so far: vCenter 5.1 update 1 with vCD 5.1.2 and vCenter 5.5 with vCD 5.5. If the problem seems to be specific to the version of vSphere. The logs generated by server SCR bee all that useful for me to understand what went wrong did not.

  Thank you

  You can consult this KB, if you haven't done so yet:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2078110

  I hope this helps.

• vCloud Director cannot deploy VAPP sysprep to error

  I had errors with WinServer 2003 deployment in our test environment, I didn't know that I had missed the sysprep package. Now, I have installed the package of sysprep by KB Article: 1026313 I downloaded the files on the Microsoft site and they etc. extracted then moved in the vCloud linux host. Now I get a new error:

  Internal server error
  -Cannot start VAPP "vApp_administrator_9."
  -Unable to start virtual machines in the pool of resources '0047960730-InternDevvDC '.
  -NFC HTTP error. Cannot deploy the package from /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab to 0728198015-WinServer03R2/windows_deployment_package_sysprep.cab./opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab [Cloud_DS3] (Permission denied)

  I had not seen a response on the forums for that so far, if there are please point me in that direction. We are just testing, but I would like to see what the top and work. The extract of the error in the vcloud debug log file is:

  2011-03-24 09:23:48, 431 | ERROR | akimbitask-0 | DRSClusterDeploymentBucket | -DRS deployment failed in the Async section |
  com.vmware.ssdc.util.LMException: NFC HTTP error. Cannot deploy the package to /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab to 0728198015-WinServer03R2/windows_deployment_package_sysprep.cab [Cloud_DS3].
  at com.vmware.vcloud.val.customization.internal.impl.DeploymentPackage.DeployPackage(DeploymentPackage.java:160)
  at com.vmware.vcloud.val.internal.impl.VC20VirtualServer.pushDeploymentPackage(VC20VirtualServer.java:2679)
  at com.vmware.ssdc.backend.ClusterDeploymentBucket.CustomizeVMs(ClusterDeploymentBucket.java:135)
  at com.vmware.ssdc.backend.DRSClusterDeploymentBucket._AsyncDeploy(DRSClusterDeploymentBucket.java:265)
  to com.vmware.ssdc.backend.DRSClusterDeploymentBucket$ 2.invoke(DRSClusterDeploymentBucket.java:161)
  at com.vmware.ssdc.backend.CAkimbiTask._invokeChildUnsafe(CAkimbiTask.java:119)
  to com.vmware.ssdc.backend.CAkimbiTask.access$ 400 (CAkimbiTask.java:39)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.innerRun (CAkimbiTask.java:242)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.access$ 200 (CAkimbiTask.java:168)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread$ 1.run(CAkimbiTask.java:183)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread$ 1.run(CAkimbiTask.java:175)
  at com.vmware.vcloud.common.threadpool.ThreadContextExecutor.execute(ThreadContextExecutor.java:36)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.run (CAkimbiTask.java:194)
  Due to: java.io.FileNotFoundException: /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab (Permission denied)
  at java.io.FileInputStream.open (Native Method)
  at java.io.FileInputStream. < init > (FileInputStream.java:106)
  at org.apache.commons.httpclient.methods.FileRequestEntity.writeRequest(FileRequestEntity.java:73)
  at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:499)
  at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2114)
  at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1096)
  at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
  at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
  at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
  at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
  at com.vmware.vcloud.val.nfc.client.impl.HttpNfcClientSession.executeMethod(HttpNfcClientSession.java:200)
  at com.vmware.vcloud.val.nfc.client.impl.HttpNfcClientSession.putFile(HttpNfcClientSession.java:181)
  at com.vmware.vcloud.val.nfc.client.impl.NfcClientFacadeImpl.putFile(NfcClientFacadeImpl.java:61)
  at com.vmware.vcloud.val.customization.internal.impl.DeploymentPackage.DeployPackage(DeploymentPackage.java:158)
  ... 12 more

  Thanks in advance for any help.

  vCD creates a non-root user, vcloud, which is what most of the services is running as. There is a small component that runs as root in order to use the privileged TCP ports (80, 443), but everything else is actually happening in the non-preferred process.

  So you can have a problem with permissions on the sysprep cab file or the directory it is located in (especially if you have changed your umask default RHEL).

  As root:

  CD $VCLOUD_HOME

  chown-r vcloud:vcloud guestcustomization

  chmod 550 guestcustomization

  chmod 550 guestcustomization / *.

  If you need to rebuild the sysprep files in the future, you can a mode of 770 instead, but the vcloud user doesn't have write access to anything in this directory.

  Without restarting the cell is necessary. Just try to customize an another TIME.

• Cannot create vApps in vCloud Director 5.1

  I am unable to create a new TIME in my organization. When I login in the vCloud Director URL Org I don't see an option to import virtual machines from the vcenter server. If I am trying to build a new TIME I get an error message "you can add a new TIME because there is no available in this organization CDV. Contact your system administrator. I defined the pVDC and Org VDC and two of them have checked green.

  Any ideas?

  Just a quick info, the problem is resolved.

• Run a Virtual Appliance on a vCloud Director 5.5 VDC/vApp

  I want to deploy a Sonicwall Email Security Virtual Appliance (VA) in a vCloud Director 5.5 VDC/vApp.  The VA is in OVA format.  How do you do this in Director vCloud?  I tried to import the VA using vSphere importing, but is does not appear as a selection.

  Thanks for the detailed info Alan.

  2014-12-08 23:14:53, 309 | WARN | backend-activity-pool-237 | VAppUploadManagerImpl | Transfer session: 91f2a458-f5b5-c 451-835-bec280e4165f. Error during downloading content: folder 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) does not exist in our inventory, but vCenter Server claims it does. | VCD=939f2481-9f68-4a39-a0a3-769fc9387b15,Task=65ad7396-5084-4E51-941a-a9f4abcdc657 activity = urn: uuid:65ad7396-5084-4e51-941a-a9f4abcdc657

  com.vmware.ssdc.util.LMException: 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) folder does not exist in our inventory, but vCenter Server claims it does.

  at com.vmware.vcloud.val.internal.impl.VC20VirtualEngine.waitForFolderInInventory(VC20VirtualEngine.java:2102)

  at com.vmware.vcloud.val.internal.impl.FolderUtil.createFolderIfNotAlreadyExist(FolderUtil.java:142)

  Can you please check if the vCD vCenter proxy running.

  Please see the links below.

  Cannot create the VAPP to vCloud 5.1

  http://www.Boche.net/blog/index.php/2011/12/16/vCloud-Director-and-vCenter-proxy-service-failure/

  vCenter | Tom Fojta & #039; s Blog

• vCloud Director vCloud connector installation

  I try to get vCloud connector installed inside vCloud Director. I deployed a VCC vCC node and server in my network ExternalRouted and I am following http://pubs.vmware.com/hybridcloud/index.jsp to a T.
  Org network gives SCR Server 10.10.1.53 and VCC node 10.10.1.54
  Within the vShield edge apparatus I configure ports as such

  -Screen Shot 2012-02-23 to 2.20.09 PM.png

  -Screen Shot 2012-02-23 at 2.21.33 PM.png

  I can access my vCloud knot web server interfaces and fine, but when I try to register that a node with the server is just completely turns off. The VCC server can ping the SCR node with the NATed IP of 192.168.60.24.
  It is located on this screen and two tracks and leave real quick or he just completely dies. I tried to switch to the Public as well, but it's still doesn't work.

  -Screen Shot 2012-02-23 at 2.24.37 PM.png

  
  If I go to the server and I click the button on Client vSphere or cloud.vmware.com I see this error and that doesn't look good.

  -Screen Shot 2012-02-23 at 2.27.55 PM.png

  
  I have completely open ports in firewall for these two vApps and not *'s everywhere, and it always shows the same errors.

  I was able to complete the vCloud connector install with zero problems when I just did a normal vSphere OVF import save it on my server vCenter. This isn't a problem with the OVFs.

  Thanks for any help.

  I have not tried.  Of course in my setup, my NŒUD is vCloud with a NAT address and which works very well.  It is the SCR is the issue because it needs access to vCenter Server.  You can try to use an external live... or just move right in vCenter

• VSM vCloud Director connector question

  Hello

  We are on the VSM 9 R8. After completing all the mappings in various models of demand, when I try to call outgoing vCloud action 'Instantiate VAPP model"Director of the connector, my request is a failure with the error:

  DATA: VAPP model missing href

  Even if I add 'href' as a custom field in the CMDB VAPP model element and map it on the "API URL" field of the resource in the "resources" tab I'm dealing with the same error.

  All the world is facing this issue before? Also, I can't find the location of the logs for the VSM workflows. Can someone point me to the right direction?

  Concerning

  Ankit

  When you map the shares, you must make a link to the internal fields using point link, not the fields task or demand.    Create a custom field of QD on your application form for each model VAPP, network config of vDC. elements

  The vApp model, the network and the vDC must already exist in your CMDB and are created by the map of the resources of the vCD connector.

  

• What is the smallest model of VAPP available that can be used with vCloud Director?

  Hi all

  I was on the hunt to find the smallest operating system which can be used for demonstration purposes.

  I want to be able to quickly create vApps so a small footprint would be ideal.

  What guys do you use?

  I found this customization for operating system support invited into vCloud Director 5.5 (2058524) | VMware KB

  I always look for a 'micro' distribution that supports customization of comments.

  What is the smallest available?

• Nested VApps in vcloud Director

  Is it possible to create the vapps nested within vcloud Director?

  Nesting vapps won't happen in vCD.  They will be parallel vApps.  Is not stop you from writing a tool/site Web automation, which would show you have there.

  vRA will address finally that, but they do not use vApps.  all virtual machines just became machines to manage without the concept of being part of a paralytic.  It will be that you have a plan of several computers that uses two other plans several computers (a DB level on the application layer).

• Cannot delete the storage policy to vCloud Director 5.5

  I'm trying to delete the storage policy to vCloud Director 5.5. I did in several vCloud Director organization VDC but stuck with one on the same instance of vCloud Director. I migrated all the VMs, the media and the VAPP model to another storage strategy. I checked in vCenter as there is no VMs who belong to this policy. Always in the vCloud Director, I see 30MB "asked" to this strategy of storage for this VDC.

  Any ideas what I need to check? How can I find what always uses this storage strategy?

  The problem has been resolved. Failed ISO image was only visilble in Administration and media & other only. After it has been removed, we were able to delete the storage policy.

• Cannot access vCloud Director VM console

  Hello

  We´re in the face of a very strange problem when you try to access a console virtual machine via the vCloud Director 5.6 Web Portal.

  Let me describe the environment:

  1 - 2 vCloud Director cells;

  2. load balancer 1;

  3 - 1 VIP for the proxy console; 1 VIP for the web portal;

  4 - certificate of CA-signed 1 with wildcard characters (*. < domain >) instead of certificates 2 ordinary host (http. < domain > and consoleproxy. < domain >).

  5 - the following procedure was used to create the keystore of Java and to be able to import the certificate even twice (each time with a different alias):

  OpenSSL pkcs12 - in /keystore/ < company > .pfx-out /keystore/ < company > .pem

  OpenSSL pkcs12-export - in /keystore/ < company > .pem-inkey /keystore/ < company > .key-out _http.p12 /keystore/ < company > - name "http".

  OpenSSL pkcs12-export - in /keystore/ < company > .pem-inkey /keystore/ < company > .key-out _console.p12 /keystore/ < company > - name 'consoleproxy '.

  keytool - v - importkeystore - srckeystore /keystore/ < company > _console.p12 - srcstoretype PKCS12 - destkeystore /keystore/ < company > .ks - deststoretype JCEKS

  keytool - v - importkeystore - srckeystore /keystore/ < company > _http.p12 - srcstoretype PKCS12 - destkeystore /keystore/ < company > .ks - deststoretype JCEKS

  6 race "keytool-list - keystore /keystore/ < company > .ks - stores JCEKS" shows two aliases in the keystore.

  7 - vCD installer not to complaint about it.

  8 - certificate is loaded correctly when accessing the web portal

  Now the question:

  1 - the gate opens as it should;

  2. each type of action is possible and works very well;

  3. when we open a VM console for the first time, it opens normally;

  4. If we close it and try to reopen, or if we try to open a second console, it won´t open;

  5 - according to the browser:

  5.1 - console remains black. State begins to 'connection '. Changes to "Offline" after a short time;

  5.2 - console remains empty. Status hangs on "Loading"; He sometimes goes to "disconnected";

  6. If restart us the two cells, it begins around (able to open the first console, cannot open the rest);

  7. same behavior if the access using the VIP (with load balancing) or directly (using the internal IP address of cells).

  I ve seen some issues with what seemed like the same problem but no conclusive answer.

  Any help on this would be appreciated.

  Thank you very much.

  The fixed.

  1 - upgrade of vCD 5.6.3 to 5.6.4.

  2 - something with virtual machines, we had deployed for testing. We have erased their and the new have no behavior.

• Add firewall rules to a VAPP vCloud Director network via PowerCLI

  Hi, I am trying to add a VAPP network firewall rules in vCloud Director 5.1 with PowerCli 5.1.  This script seems to update, without error, but an update of firewall configuration reveals no change.

  Connect-CIServer-Server server.domain.local Org - org01-Director of the username-password xxxxxx - WarningAction SilentlyContinue

  $vAppNet = get-CIVAPP 111. Get-civappnetwork vApp_Network
  $vApp = get-CIVAPP 111

  $networkConfigSection = .extensiondata (get-CIVapp 111). GetNetworkConfigSection()

  $fwService = New-Object vmware.vimautomation.cloud.views.firewallservice
  $fwService.DefaultAction = "drop".
  $fwService.LogDefaultAction = $false
  $fwService.IsEnabled = $true
  $fwService.FirewallRule = New-Object vmware.vimautomation.cloud.views.firewallrule
  $fwService.FirewallRule += New-Object vmware.vimautomation.cloud.views.firewallrule
  $fwService.FirewallRule [0] .isenabled = $true
  $fwService.FirewallRule [0] .description = "TS of TSG"
  $fwService.FirewallRule [0] .protocols = New-Object vmware.vimautomation.cloud.views.firewallRuleTypeProtocols
  $fwService.FirewallRule [0].protocols.tcp = $true
  $fwService.FirewallRule [0] .policy = "enable".
  $fwService.FirewallRule [0] .port = "3389.
  $fwService.FirewallRule [0] .destinationIp = "Any"
  $fwService.FirewallRule [0] .sourceport = "3389.
  $fwService.FirewallRule [0] .sourceip = "192.168.1.81 - 192.168.1.89.
  $fwService.FirewallRule [0] = 'en '.

  $vAppNet.extensiondata.configuration.features += $fwService
  $networkConfigSection.UpdateServerData)

  -------------------------------------------------------------------------------------------

  When I run $vAppNet.extensiondata.configuration.features to check to see if it has been added, I see it below highlighted in red...

  PowerCLI C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI for tenants > $vAppNet.extensiondata.configuration.features

  
  DefaultAction: drop

  LogDefaultAction: false
  FirewallRule:
  IsEnabled: true
  Get_anyattr:
  VCloudExtension:

  NatType: ipTranslation
  Policy: allowTrafficIn
  NatRule:
  ExternalIp:
  IsEnabled: true
  Get_anyattr:
  VCloudExtension:

  DefaultAction: drop
  LogDefaultAction: false
  FirewallRule: {}
  IsEnabled: true
  Get_anyattr:
  VCloudExtension:

  -------------------------------------------------------------------------------------------------------------

  Change the script a bit generates an error during the update...

  -------------------------------------------------------------------------------------------------------------

  Connect-CIServer-Server server.domain.local Org - org01-Director of the username-password xxxxxx - WarningAction SilentlyContinue

  $vAppNet = get-civappnetwork vApp_Network

  $vApp = get-CIVAPP 111
  $networkConfigSection = .extensiondata (get-CIVapp 111). GetNetworkConfigSection()
  $vAppNetwork = $networkConfigSection.NetworkConfig | where {$_.networkName - eq "vApp_Network"}

  $fwService = New-Object vmware.vimautomation.cloud.views.firewallservice
  $fwService.DefaultAction = "drop".
  $fwService.LogDefaultAction = $false
  $fwService.IsEnabled = $false
  $fwService.FirewallRule = New-Object vmware.vimautomation.cloud.views.firewallrule
  $fwService.FirewallRule += New-Object vmware.vimautomation.cloud.views.firewallrule
  $fwService.FirewallRule [0] .isenabled = $false
  $fwService.FirewallRule [0] .description = "TS of TSG"
  $fwService.FirewallRule [0] .protocols = New-Object vmware.vimautomation.cloud.views.firewallRuleTypeProtocols
  $fwService.FirewallRule [0].protocols.tcp = $true
  $fwService.FirewallRule [0] .policy = "enable".
  $fwService.FirewallRule [0] .port = "3389.
  $fwService.FirewallRule [0] .destinationIp = "Any"
  $fwService.FirewallRule [0] .sourceport = "3389.
  $fwService.FirewallRule [0] .sourceip = "192.168.1.81 - 192.168.1.89.
  $fwService.FirewallRule [0] = 'en '.

  $vAppNetwork.Configuration.Features = $vAppNetwork.Configuration.Features | where {!} (() $_-est [vmware.vimautomation.cloud.views.firewallservice])}
  $vAppNetwork.configuration.features += $fwService
  $networkConfigSection.UpdateServerData)

  ----------------------------

  Error

  ----------------------------

  Exception by calling 'UpdateServerData' with '0' or the arguments: "Bad request - Unexpected Exception of JAXB - HVAC-complex - type. 2.4.b: the content of the 'FirewallRule' element is not complete. An a ' {'http://www.}

  "VMware.com/vCloud/v1.5":VCloudExtension,"http://www.vmware.com/vcloud/v1.5": Id, ""http://www.vmware.com/vcloud/v1.5 ": IsEnabled, 'http://www.vmware.com/vcloud/v1.5 ': MatchOnTranslate,"http://www.vmware.com "

  "/vCloud/v1.5": description, ""http://www.vmware.com/vcloud/v1.5 ": policy,"http://www.vmware.com/vcloud/v1.5 ": protocols, 'http://www.vmware.com/vcloud/v1.5 ': IcmpSubType," "http://www.vmware.com/vcloud/v1.5": P "

  "ORT," 'http://www.vmware.com/vcloud/v1.5 ': DestinationPortRange, "http://www.vmware.com/vcloud/v1.5": DestinationIp, ""http://www.vmware.com/vcloud/v1.5 "{: DestinationVm}" ' is expected. ""

  On line: 1 char: 39

  + $networkConfigSection.UpdateServerData < < < <)

  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)

  + FullyQualifiedErrorId: DotNetMethodException

  I was not able to understand how to successfully upgrade.  Please, any help would be greatly apprecieated.

  Hi, I found my answer, here is the final solution.

  $vAppNet = get-CIVAPP 111. Get-CIVAppNetwork vApp_Network
  $vApp = get-CIVAPP 111
  $networkConfigSection = .extensiondata (get-CIVapp 111). GetNetworkConfigSection()
  $vAppNetwork = $networkConfigSection.NetworkConfig | where {$_.networkName - eq "vApp_Network"}

  $fwService = New-Object vmware.vimautomation.cloud.views.firewallservice
  $fwService.DefaultAction = "drop".
  $fwService.LogDefaultAction = $false
  $fwService.IsEnabled = $true
  $fwService.FirewallRule = New-Object vmware.vimautomation.cloud.views.firewallrule
  $fwService.FirewallRule += New-Object vmware.vimautomation.cloud.views.firewallrule

  Rule #First
  $fwService.FirewallRule [0] .isenabled = $true
  $fwService.FirewallRule [0] .description = "allow all outgoing traffic.
  $fwService.FirewallRule [0] .protocols = New-Object vmware.vimautomation.cloud.views.firewallRuleTypeProtocols
  $fwService.FirewallRule [0] .protocols. ALL = $true
  $fwService.FirewallRule [0] .policy = "enable".
  $fwService.FirewallRule [0] .destinationIp = "external".
  $fwService.FirewallRule [0] .sourceip = "internal".

  Rule #Second
  $fwService.FirewallRule [1] .isenabled = $true
  $fwService.FirewallRule [1] .description = "TS of TSG"
  $fwService.FirewallRule [1] .protocols = New-Object vmware.vimautomation.cloud.views.firewallRuleTypeProtocols
  $fwService.FirewallRule [1].protocols.tcp = $true
  $fwService.FirewallRule [1] .policy = "enable".
  $fwService.FirewallRule [1] .port = "3389.
  $fwService.FirewallRule [1] .destinationIp = 'Any '.
  $fwService.FirewallRule [1] .sourceport = "3389.
  $fwService.FirewallRule [1] .sourceip = ' 192.168.1.81 - 192.168.1.89.

  $vAppNetwork.Configuration.Features = $vAppNetwork.Configuration.Features | where {!} (() $_-est [vmware.vimautomation.cloud.views.firewallservice])}
  $vAppNetwork.configuration.features += $fwService
  $networkConfigSection.UpdateServerData)

• Cannot create the vCloud Director VDC

  Hi all

  Need help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.

  Note: My setup does not contane VXLAN although we have the network VLAN supported to improve network performance.  Of the vExpert mentioned to create a dummy VXLAN right in the vCloud Director and I'm not sure how to do this in vCloud Director console. (I noticed a default VXLAN is already created, I understand vCloud 5.1 has this feature is enabled by default)

  Installation succeeded in creating the Org VDC failed with error 'cannot create the VDC' found this disabling and re activation will release the Red 'X' I think it's false positive because it shows us that everything is perfect even if we get an error message in the logs ' status: error "and with" details: Internal Server Error' find the home images below.

  
  

  " In any case when it comes to download media after having created the catalogue for Org VDC we get the error message cannot complete the operation because the current organization VDC"Demo-Org-VDC"is disabled or is not ready '.

  I also noticed that we get an error message on vcenter Server vcloud (cell) cannot create the folder name already exists check the last my vcenter Server error message.

  also attached the logs in the images below.

  I found two post, which there is not yet of resolution and the other said its solved but does not have the fix.

  Any help to point me in the right direction will be appreciated.

  I will be happy to provide you with newspapers if necessary.

  Thank you

  Ibrahim

  I was not talking about data warehouses.  I refer to the view in the vSphere Client.

  Open the vSphere Client... and go to the computers view models and virtual (c# = Home button at the top, then models and virtual computers)

  In this perspective, there is a number of record Blue icons. Make sure that none have the same name as you describe.

  This is directly related to the error message in the client image vSphere that you took in the original post "cannot create folder. "PNG"

  vCloud produces an error because of something that happens in vCenter.

• VApp on vcloud Director console

  Hello

  I have a little problem with vcloud Director.

  When I access the console of vapp, a window will appear, but it is completely black...

  I tried to access the machine with the vsphere client and it works... but I want to access my computer via the web console.

  You have an idea?

  Thank you

  It means something between the IP address of the client/Psoxy, pr cell/ESX is blocked, there is a bad road, or you have a load balancer to do SSL unloading on certificates of proxy requiring passthrough.  nfortuately one of the eanc thos create the connection problem.  You must ensure that all the pieces are in place one by one.  You may need to test each connection separately.  There is further discussion on this topic as well.

• Cannot create a subscription to notifications vCloud Director (Server.setCustomProperty routine-cursor)

  Hello

  I'm having a problem when you use the workflow of subscription vCloud Director notification.

  When you try to add an AMQP broker using the workflow ' To create a subscription for notifications vCloud Director ' I get the error messages: "Value can not be supported by the custom property".

  The broker and the recipient are created.

  After doing some research, I see that the error occurs at the end of the workflow to the 'Set prop' custom task scriptable during the procurement of:

  If (routingKeyAtt! = null) Server.setCustomProperty (subscription, "routingKey", routingKeyAtt);

  No idea why I can't set this specific CustomProperty?

  no idea who to work around this problem?

  Thank you!

  All - I've updated the package of Notifications for 5.1 file found here: vCloud Director 5.1/5.5 blocking tasks and notification using AMQP package -please try this version, it should now allow the subscription as well as adding custom properties successfully create.

  UPDATED March 11, 2014: update to "Create a vCloud Director notifications subscription" workflow for working with vCloud Director 5.5. The change IS backward compatible with vCloud Director 5.1.