VCS upgrade through TMS to X7.1

Similar Questions

• Do we need to purchase the license to upgrade the VCS, VCSe and TMS?

  Hello

  We need to get a new license when upgraded version of VCS, VCSe and TMS?

  Hi Kelvin,

  xxx. OVA files are package files to deploy the VCS on virtualize platforms.

  Release key are required to upgrade the VCS for major updates. for p. ex. upgrade of x 6 x 7 software version worm.

  However for improvements minor as x7.2 to x7.2.2 these are the released hotfix version or bux fixes release and you don't need a license for this upgrade.

  in any case if you your devices are less covered by valid contract you can get the license key anytime just contact cisco license team on "[email protected] / * /" and they should be able to provide the necessary license.

  Rgds

  Alok

• VCS FindMe vs TMS FindMe

  Ladies and gentlemen,

  I have integrated our VCS (including management FindMe) in terms of a TMS, but subsequently in the VCS > status > Application > menu user Lync State I see the CMRS only, but not the end points recorded.
  I have several questions:

  1. How can I configure the TMS to publish endpoints of telepresence as an account FindMe (to see them as a registered Lync client)
  2. Currently all CMR have the status offline, is it possible to change their default online status?
  3. Finally: How can I restore the FindMe management to VCS of the TMS. In the latter case, I would be happy if I could put in place.

  Thank you
  Laszlo

  You can use TMSPE for a variety of uses, such as the provision of devices, FindMe, Collaboration meeting rooms, etc.  In your case, you use it to FindMe and CMR.

  Under Provisioning > users, manually create or import AD users and assign them a 'video address model. "  The boss of the address of the video will be their address FindMe and them will automatically create a FindMe account for each user in Provisioning > FindMe where all you have to do is to create associated device addresses, and locations, etc. that will connect to the address the user FindMe.

  The menu devices is for devices implemented and can be ignored in your case because you are not provisioning all devices through the VCS.

• Directories missing programming interface after upgrade to TMS 14.5

  Upgrading to TMS 14.5 this morning and now to find, to my chagrin - none of my phone books are available in the drop down popup add Participants - see attached screenshots.

  All directories are also properly appear on the evaluation criteria, so I know they are always there...

  These are the directories that were correctly listed in the drop down menu in all other versions of TMS:

  Phone.gif

  

  That's what I have now:

  Phone2.gif

  

  Anyone else having this problem? If I can't resolve it, then I have no choice to the downgrading to 14.4 :( (It is a machine virtual is only a question of the application of the snapshot last chance).

  Edit: I managed to create a workaround solution connecting sources of the telephone book for the "all systems: telephone directory, which means that support staff will be at least able to find entries as long as they have an idea of what to look for." Far from ideal if. :(

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

  HM... I can reproduce the problem in 14.5. It looks like a side effect not intentional to some other things we were doing. I will study more.

  Kjetil-

• Remove the video of TCS in the layout when flow on demand through TMS ' record'

  System information:

  TMS v13.2.2

  TCS v5.2 (configured as a terminal)

  4510 Codian MCU v4.4

  The TCS and the MCU are registered at TMS.  I work on the management of all our calls more centrally by TMS and struggled to integrate the CHT in conferences.  I don't want the black screen of the "registration...". "appears as a participant at the disposal of the participants.  I know these can be configured manually to rule out it, but I want to automate it as much as possible.

  On the MCU, aliases are configured to not send the video to the MCU by default; It silently records in the background.  All conferences configured directly on the MCU without the "help" of TMS call out to all the endpoints - including the alias TCS - and only the video settings are visible.  The content is saved properly.

  When conferences are planned through TMS, however, the TCS alias is composed in just like before, but it also sends a video feed to the MCU - a black screen with "Recording" on this subject.  I tried to call from the system directory and what makes an "external" call, but both give me the same result.  I guess that's because the MCU and TMS do not share the same phone book.  What is the reason?  When this happens, the MCU is not the ability to cut the flow of the CS during the video content.

  Currently, my plan is to have every endpoint called via TMS scheduling and then have my technicians dial to the CS manually after that trial is over.  Automation is my aim, however

  Any help would be great.

  Hello Luke.

  You can very easily cut the video and/or audio from the TCS in your conference.  When you create the reservation in MSD and have your MCU added, go into 'Connection settings' and it should be two boxes on the right-hand side where you can trim the video/audio.

  Try it and let us know.

• Cannot add VCS Expressway to TMS

  I'm trying to add the VCS Highway to TMS.  When I add, TMS tries to connect via different protocols.  Then it errors and the screen refreshes quickly enough, and I don't see what happened.

  Where should I go to try to determine what happened?

  Suggestions to solve this problem?

  Thank you

  Ron

  Is this a new deployment? The SNMP on VCS is disabled by default.

  Check the setting of SNMP on the CV:

  System > SNMP

  SNMP mode: v3 more TMS support

  Try to add the VCS on MSDS once again and if you could share the screenshot on everything that happens when you add to the system.

• Is it possible to send an alert through TMS when a crossing box fails between a VCS - C and VCS-E?

  Hi all

  TMS has many features to alert, but I don't see an easy way to alert us to the fact that a crossing area may have failed between a VCS - C and VCS - E, or even neighbor or other types of areas than peers with other devices. Is this possible?

  As we now have a large number of VCS, it is important for us to know that these peering is active. It is not necessarily the case that individual machines become inaccessible, just the interconnection network fails for some reason any.

  Thank you very much

  Chris

  As much as I know tms cannot do that, she must be a feature request.

  / Magnus

  Sent by Cisco Support technique iPhone App

• Problems with VCS - C, VCS - E and TMS

  I hope someone can help me because I nearly pulled my hair with this problem.

  We have a VCS - C and VCS-E the two X7.2 running.  Our TMS runs 13.2.1.  We used it for several months with the 'transfer', which worked well.  Recently, I am currently having of Movi/Jabber clients authenticate via LDAP/AD, in addition to using local accounts (we have some vendors and partners who register through our infrastructure).

  I have gone through all the documentation and think I have it configured correctly, however, things work behind what I need them for.  Currently, a client who is on our internal network can sign up by using the credentials of the AD, but may NOT use local credentials.  Customers who are outside our network can register using the information of local identification, but NOT using their AD information.

  My configuration on the devices of VCS is:

  VCS - C

  Credentials of the default TextBox control

  Course credentials Check box

  By default, subarea treat as authenticated

  VCS-E

  Course credentials Check box

  SIP Proxy record tried Off and known Proxy Proxy at all.  Currently set to Off

  What I'm missing here as I'm more on the side things CTS and just try to learn the VCS Cisco Tandberg product?

  Thank you

  Allen

  Allen,

  When you enable the NTLM protocol challenges on your VCS - C, this means that only NTLM authentication will be used for devices that support NTLM, namely Movi 4.2 and later, video Jabber 4.3 and more more Jabber for iPad. Other devices that do not support NTLM authentication will use either the local database or LDAP authentication, depending on what you have set up on your VCS.

  Is there a particular reason why you want to use Digest authentication and NTLM for video devices Jabber?

  -Andreas

• Can you do an upgrade through my ISP

  Can I do a upgrade of windows through my ISP? How or if they should do? I have Home Basic now, but I would try a higher stage.

  Hello

  An ISP provides your Internet connection, not operating systems.

  But you can buy an upgrade to Microsoft's operating system and download via your Internet connection

  And Vista is no longer sold by Microsoft.

  Microsoft now sells Windows 7.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Trying to link my VCS to my TMS, but I get no response VCs https in the TMS

  Hello

  I'm trying to get my MSD to talk to my VCS, but whenever I try to get the two to talk to each other. In my TMS, it said "no https response" of the VCS. I know that HTTPS is enabled in my VCS, what else could be the problem?

  Do you have a hostname on your VCS? DNS is able to resolve the domain your RESUME FULL name?

  Please, try the following on your TMS:

  (1) in the TMS Server RDP
  (2) open Administrative Tools > local security policy
  3) go to security settings > local policies > Security Options > System cryptography: Use FIPS compatible algorithms for encryption, hashing, and signing.
  If this option is enabled, please disable it and then repeat the test.

• Cisco Telepresence Server/Cisco Telepresence driver/Cisco VCS - C / Cisco TMS license

  A big problem with the fact that I'm stuck is licensing. Really, I have tried many things to find the solution for it, but could not.

  I have actually made all of these servers (mentioned in the title) in my lab in preparation for the CCNP Collaboration certification at home.

  I am not able to complete some laboratories due to license issue (I guess). Y at - it an option to get the demo license for all these servers?

  I would be really greatfull if someone can suggest me the solution and/or the licenses required to complete all the stuff for my CCNP Collab tag.

  Best regards

  Dipak Singh

  TMS and VCS - C when installed without licenses, are automatically set mode of demonstration/test with some availability of license to test with. If needing a VCS-E, you will need to do to your account manager and they should be able to get you the time limited licenses good because I think that 90 days.

  Conductor Essentials is free, which means that you can install and get full functionality without the need of all licenses, but you are limited to 1 conference bridge and no grouping is allowed.

  TelePresence Server require licenses to function, once again, reaching out to your account manager for this.

  At the end of the day, you should reach to your account manager for all of this, as they should be able to help get timed license if you need.

• VCS 7.2 + TMS 13.2.1 + version TMSPE Movi/Jabber compatibility

  Hi, if I switch to 7.2 VCS + TMS 13.2.1 + TMSPE.

  Jabber/Movi will work with version 4.1 and 4.2?

  This is essential information as Jabber (4.4) update is not possible right now on all PCs.

  Tom br.

  Yes.

  We have everything from 4.0.1 to 4.5 Movi on the system we use in the office, I work in and run with TMS 13.2.1 X7.2

• Upgrade of TMS or MST TMSPE Prime - TMS 13.2 TMSPE 1.0

  We have TMS 13.2 and TMSPE 1.0 all work fine. I want to upgrade to 14.3.2 and TMSPE 1.1 but TMSPE 1.1 requires 14.2 and 14.2 TMSPE 1.1 so how can I do to make the upgrade - I can't find any documentation that addresses this clearly. I did not mind from 13.2 to 14.2 updated TMSPE to 1.1, then upgrade to 14.3.2 - just want to be sure that it works.

  As long as nobody don't tent for use at the time wherever you're upgrading, it shouldn't matter too much order in which do you.  Note: the TMS version required by TMSPE is the minimum version required for the operation, so you can use it with a higher numbered version.

  I updated level TMS directly to 14.3.2, then do TMSPE to 1.1.

  Note: Some process may be slightly different depending on which version of the software you use on your VCSes.  There are two deployment of TMSPE guides, one for the old versions and the other for X8.1.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• tools and hardware upgrades through the update after the upgrade Manager

  If I run a base line to upgrade tools and equipment of vmware, then choose restore, is a clever enough Update Manager to make tools first and then perform the upgrade of hardware vm? I have a few machines I moved from 4.1 to 5.1 and the two operations must be made. I don't know if I have to do both together or separately.

  This logic is incorporated in the Update Manager if you use grouping Baseline: basically, create a group with the material and baselines Tools, join group reference VM (s) that interest you and to fix. Otherwise, you can make sanitation through autonomous base lines - in this case, you would need address first, then hardware tools.

• Want to 27qe: SSD UPGRADE through PH

  I'm shopping for an all in one. I like the touch screen. I price an 27qe with all updates. The problem is that it looks like, I can only go to a 128 GB SSD. I don't know why PH (system won't let me use the exact name) don't allow me to choose a 500 GB SSD or I can't get one on a special order?

  If I can't get it through difficult PH would it to buy an SSD 500 GB and that someone else remove the SSHD and install the SSD? No idea how much it would cost?

  Is it useful to go through the trouble of having an SSD?

  Thank you

  Dobe12, welcome to the forum.

  Dobe12 wrote:

  I'm shopping for an all in one. I like the touch screen. I price an 27qe with all updates. The problem is that it looks like, I can only go to a 128 GB SSD.

  I don't know why HP (system won't let me use the exact name) don't allow me to choose a 500 GB SSD or I can't get one on a special order? HP makes different models to give everyone something they can afford.  Therefore, they use the limited options in each model.  I contacted HP Store and they said that you can order what is offered.  I agree with you wanting a larger SSD.

  If I can't get it through HP difficult would it be to buy an SSD 500 GB and that someone else remove the SSHD and install the SSD? No idea how much it would cost?  I suggest that you purchase the SSD drive and check locally with a qualified computer store to see what they allow you to install it would charge.  You can buy a Samsung EVO 840 500 GB for $249 on Amazon.  I have one and they are very fast.

  Is it useful to go through the trouble of having an SSD?  Absolutely!  I have a laptop game Omen HP with a 256 GB SSD.  It starts in less than 7 seconds and loads of programs in record time.

  Thank you

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.