HP Envy 5530: Software and HP Envy 5530 lost hp printer solution Center icon cannot sweep

Similar Questions

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• HP Photosmart 3110 all-in-One Printer Scanner and install the HP for Windows 7 Solution Center

  Hello

  I have a printer HP Photosmart 3110 All in one with Windows XP. I bought a new computer with Windows 7. I plugged my printer HP to Win7 and now scan does not work. I need your help to install the HP Solution Center and make it work under Win7.

  There is not a download for Windows 7 on this printer. It is the only way for you to scan through paint. You will also be able to get the center of solutions is due to any software.

  THX

• OfficeJet Pro8500: need software for Hp Solutions Center

  Attempt to analysis with the software and get messagae my printer has been disconnected

  Remove all software and reinstalled.  Scan now worked but when I tried to print nothing appeared in the queue

  Remove all the software several times and finally I can print from work, outlook, internet etc.

  But now I don't have the software so I can scan from my pc.  I think it is called HP Solutions Center.  Cannot find how downlaod just this part so I can scan from my pc.

  I don't want to disconnect the pc from my printer and do it again because maybe printing does not work.

  I want to just as the software.  How can I download it to my pc so I can run if I use the HP Solutions Center.

  It is difficult to work with HP.

  Hi @Iowagal40,

  Welcome to the Forums of HP Support!

  I understand that you would like to know how to scan using your HP Officejet Pro 8500 printer. I will definitely do my best to help you.

  What is the name and the product number of your printer? How can I find my model number or product number?

  It seems that there are problems with software of printer on your computer, in order to solve this problem, we would need to do a clean uninstall and re-install. You must unplug the printer to the USB port during installation.

  If you do not want to do, there are other ways that you scan using these workarounds.

  Use these workarounds to analyze whether the solutions did not resolve the problem. Workarounds may not be available depending on the printer and your connection type. If the first method you tried didn't work, try one of the other workarounds.

• HP solutions Center not in new printing software

  I recently bought the HP Photosmart e-all-in-one 7510 device, it replaced my HP J6480 all-in-one. One of the programs with the software J6380s has been that something called "HP solutions Center." I ended up uninstalling the Solution Center and all the HP software to fix a bug. I installed successfully the new printer and software, however, the digital dashboard is very rudimentary. It lacks several features that I really enjoyed with Solution Center: 1. the is scan searchable .pdf documents 2. several photos with a scan (can not do this with the basic software provided with the 7510) 3. easier handling of scanned documents, (crops, rotation, etc.). The printer is a great, but without the software to drive... I tried to find a 'Contact HP with a suggestion/comment' link, but unfortunately, everything is suitable for technical support. Everything works fine, so I really don't need to contact technical support. Does anyone know if HP will integrate Solution Center in an update of the player/softward futre. It seems that all new everything-in-one have more solutions as part of the software Center. Thank you

  Hello

  One of the latest HP products come with different software, no longer aiming the center of HP solutions and will most likely not include it in the future.

  1. I'm afraid you won't be able to save a searchable PDF using the specific printer.
  Unlike products Officejet, Photosmart products does not include OCR application as part of the HP software, which means that text or searchable PDF editable scan are not available. for this, you can use any 3rd party software scanning.

  You can try Vuescan to 3rd party software, in my opinion, it should provide this kind of functionality.

  It can also answer your problem of 3rd.

  2. to scan multiple pages into a single file, the pages in the feeder from the lace top and then analyze by selecting the Document in the file option.

  You can also do this from the flat bed scanner by launching the software from your PC.

  Click on scan a Document or Photo and select the Document in the file option.

  Make sure the show the preview scan option is checked and click on scan.

  Use the button "+" under Add / Remove PAges to add more pages, filnally, click on save.

  Hope you find this information useful,

  Shlomi

• HP Envy 5530 won't print computer this weekend.

  HP Envy 5530 won't print computer this weekend.  I turned off and unplugged.  Bought on 25/10/13.  It has happened, but this time cannot operate.  Impressions of my iPad.

  Thanks for getting back to me SammyAmazon!

  I am happy to know that you can print again!

  Remember to mark our thread here as "accept as Solution" since the problem seems to be resolved.

  Have a great weekend

• HP Envy 110: HP Envy 110 "full feature software and drivers" - must use the USB cable?

  On another thread, it was recommended that use "full feature software and drivers" to solve a problem I had with a scan on my HP Envy 110.  This network printer using a WiFi connection.

  In order to take advanatage of the features in this S/W, I must be hard wired USB connected to my PC, not only for the installation, but also for operations?

  Hello

  The HP client software full functionality provide the functionality of most software, any type of software supports any type of connection.

  You can choose a wireless network or a USB connection during installation of the software...

  Kind regards

  Shlomi

• Want to 4500 printer all-in-one: new software and drivers for HP Envy 4500

  Hello, I bought this printer on 1 October and installed on my laptop Windows 10. My question is I noticed there was a series of printer e-all-in-one HP ENVY 4500 full feature software and drivers, version 32.3, filename: EN4500_198.exe which was released on November 12, 2015. Should I download and install this because I've had since October 2015 printer? If so do I have to do something after the installation to keep my printer working correctly on my WIFI wireless? Thanks in advance for any help that I couldn't find out how call HP to ask this question.

  Thank you very much for your answer! I finally understood how do I know what version of the software and the drivers, I have this morning and I don't have the version more recent and even I was wondering about. Thanks again and have a great Thanksgiving action!

• 5530 Evvy replaced printer - need to replace the driver and software?

  Hello

  Recently, I had to feel my 5530 all-in-One printer replaced while it was still under warranty. The replacement came with new driver software and everything, but since it is the same model that I decided not to install it and use the existing driver installed on computers instead. (Replacement not be come with directions for uninstall, said by the way.)

  The new printer is connected to the wireless network (using touch screen) and is recognized by computers on the network, but I can't get anything to print, since the existing driver HP software does not seem to 'find' the printer. Do I still need to uninstall the driver and reinstall? And what about the other programs installed with HP printer?

  The computers are all Windows 7 64 bit.  I'm not very technical, so it makes me a little nervous.

  Thanks for any help you can give.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• ENVY 5530: 5530 WANT wireless printer stop halfway through the page. Memory problem?

  Good afternoon:

  I m encouraged to print from an HP laptop pavilion15-N228SS wireless (WIFI) connection. Printer ENVY 5530 beggins to print but stop abruptly in the middle of the page, or just the printing of the page if there is an image.

  I think I have to give some more memory to the printer but if I Don t know how to do.

  Thank you very much.

  Take a look at this HP doc .

  You should also consider upgrading to 8.1

• Want 5530: double-sided printing 5530 hp envy

  After uninstalling and reinstalling the 5530 want to my laptop to fix a connectivity problem, I can't find the option to print double-sided. I tried to update the software of the printer, but do not always have option for double-sided printing. How can I be able to restore the double side print?

  Hello
  Make sure the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Try now print and check for the difference.

  Kind regards
  Shlomi

• 5530 envy all-in-one: printer communicates is not on wifi

  I have recently upgraded to windows 10 and initially my pc and the printer worked well together. I had to turn off printer and turn on again once the two do not want to communicate. In Control Panel, the printer shows as a folder. I tried to remove it in order to reinstall but it just says: after two days ' status: deleting printer '.

  I tried to stop the coil, removing the drivers, software uninstall and in safe mode. Just will not delete!

  If I use printing doctor it detects my wireless printer and says that all software is up to date. When I click on the next button, it says it cannot communicate as there are some missing drivers. I tried to reinstall the diving base and it makes no difference. If I connect by usb, it works perfectly!

  I checked with my router and it is connected to my network. Like wise if I connect via the IP address of printers it works and prints ok. EPrint works as well. If I try and print from a document, it will not and shows it as offline.

  

  Next, I get the following error...

  

  If I run printing doctor he finds the printer and then says to click fix printing. He wants to print the test page. I do that and nothing happens. I click on no printing, and it checks the updates and brings me back to test printing. Select this option and nothing happens again. Internal test page prints ok. Tried to uninstall the software, reboot, and reinstall.

  I'm sure I may have missed something obvious, but it is now driving me crazy... Help!

  Thanks for the suggestions. I tried everything and nothing happened. This morning I had to reinstall Windows 10 due to a completely separate issue and guess what? When I started everything was properly and the printer now works again. Bizzare!

• New hard drive - I need to recharge the HP software and do not have the disks - ENVY 14-1002TX

  My hard drive has failed.

  I don't have the card that came with my laptop.

  The significant difference between now and before is my sound buttons (volume up and down) do not work, and the quality of the sound is really bad.

  I downloaded HP support assistant, but he was not able to help me. I searched the forum and I have not been able to find anything.

  Help, please!

  Hello

  For your laptop, all downloads of software and driver available from HP are on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4207217#n222

  Note: On the sound issue you mention, first download and install the Chipset driver below.

  Chipset Driver - Windows 7.

  One when you're done, restart the computer, and then download and install the IDT Audio driver from the following link.

  IDT Audio Driver - Windows 7.

  Kind regards

  DP - K

• 5530 envy: Envy 5530 won't print, copy or scan

  Red 'X' on the lower right part of the screen of the printer is on and printer no longer works. Checked the utility application and was advised that black cartridge that is low on ink. Change cartridge. Utility program says ok now all levels. Tried to align, but although the printer display says 'printing', 'X' red down and nothing happens. Tried to print, copy and scan with similar results. Printer says it works but nothing happens. Have restarted printer and computer (iMac) without success. HELP please.

  There is no error message. The screen on the printer actually said 'impression' and the 'clock indicator' was renewable, but nothing was happening. When the operation has been cancelled and another operation selected is the same - no error message and everything seemed to happen normally, but nothing. Checked for paper and and cartridge jams - clear at all.

  Repeated undo operation retry printing a certain number of times and after about the tenth time, no reason apparent, it printed! Check all the other functions - all normal. A overall good wifi connection.

  Gremlins?

  Thank you for your help.

• Want 5530: Installation of printer driver for want 5530 and Windows 10

  HP Envy 5530 worked well on Windows 8. I upgraded me automatically to Windows 10 and now the printer does not work. I tried to download the update from HP for Windows 10 and followed the program of troubleshooting provided by HP, but without success. I read comments that suggest that it is not possible to a 5530 want a PC to the network operating Windows 10. Certainly, this cannot be correct. Advice please.

  Hello @GBeastall,

  This is a great place to visit for a community support and HP! I see that the printer does not work since the upgrade of Windows 10. I wish I could help you.

  In the printers and devices window, check which shows the name of the printer and if it is set as the default printer.

  Print a configuration page to obtain the IPv4 of the printer address: print a Network Configuration Page.

  • Check the port assigned to the printer on the computer to see if it matches the IP address of the Configuration page.
  • In devices and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.
  • It must be checked on the TCP/IP protocol.
  • Click on Configure Port to display the IP address.

  If the IP address does not, via the HP software, add a new device.

  1. Click on the Start button () or the lower left corner of the screen, then clickSearch.

  2. In the search box, type HP, and then click the icon for your printer. The software of the printer opens.

  3. Click utilities, and then click on the software & selection of the printer.

  4. Click on connect a new printer.

  Test the printer.

  Please try the steps outlined in this document, if you still have any questions: after 10 upgrade Windows, printer problems appear.

  Let me know the results of printing and scanning doctor.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.