VCSA 5.5/storage/core is going to be FULL

Similar Questions

• / storage/core support missing

  I deployed a 3 x average cluster nodes and had run a few days before I started to notice a warning in vROPs that the storage has been insufficient.

  While they inspected the storage available in the monitor system LI for all 3 nodes and notice was one show only 7.3 GB of available compared to 233 GB on 2 other nodes.

  I ran the beam of support and research if the files I look at the df file and noticed that he was missing the mountains/storage/core and/storage/var from the node with the 7.3 GB available.

  I mode Mainteanance and restarted, node, but the mounts are not automatically returned.

  Is any way to restore?

  Is this a known issue?

  ---

  Details of DF for referance.

  DF.11422.txt

  1 K-blocks used available use % mounted on file system

  / dev/sda3 8115648 2798036 4905352 37%.

  udev 8233676 112 8233564 1% / dev

  tmpfs 8233676 60 8233616 1% / dev/shm

  / dev/sda1 130888 38204 85926 31% / Boot

  / dev/Map/Data-var 20642428 1525004 18068848 8% / storage/var

  / dev/Map/Data-Core 258026884 12947700 231972192 6% / storage/core

  DF.9537.txt

  1 K-blocks used available use % mounted on file system

  / dev/sda3 8115648 3604504 4098884 47%.

  udev 8233676 112 8233564 1% / dev

  tmpfs 8233676 8 8233668 1% / dev/shm

  / dev/sda1 130888 38204 85926 31% / Boot

  / dev/Map/Data-var 20642428 3685404 15908448 19% / storage/var

  / dev/Map/Data-Core 258026884 12847568 232072324 6% / storage/core

  DF.28260.txt

  1 K-blocks used available use % mounted on file system

  / dev/sda3 8115648 5030908 2672480 66%.

  udev 8233676 104 8233572 1% / dev

  tmpfs 8233676 56 8233620 1% / dev/shm

  / dev/sda1 130888 38204 85926 31% / Boot

  OK, so we have 270 GB of PV/VG and no LVs. That's the problem known in 3.0. A transitional storage for LVM configuration problem would result in Insight Log creation/Import/Storage on the filesystem root without the mount points. Log Insight 3.3 that better capture LVM provisioning errors and try again.

  We can address this in your environment without loss. The process is a little long and has a good number of moving parts, so stop and answer if you see something you don't expect.

  # Stop the log Insight service

  stop service loginsight

  # Remove existing data

  MV/Import/Storage/storage-orig

  # Create two LVs

  var lvcreate-L 20 G - n data

  database-l 100% FREE lvcreate - n

  # List of people - you should see something like this:

  LVS

  LV VG Attr LSize pool data origin % Move newspaper copy % Convert

  data var - wi - ao - 20.00 g

  database - wi - ao - 250, 00 g

  # Create a pair of fileystems

  mkfs-t ext3/dev/data/var

  mkfs-t ext3/dev/data/core

  # In an editor (vi) open/etc/fstab and add the two lines, one for each file system. Make sure that the file ends with a line break, or mount will complain.

  / dev/Data/var/storage/var ext3 defaults 0 2

  / dev/Data/Core/storage/core ext3 defaults 0 0

  # Make that two mount point directories

  mkdir Pei/storage/core/storage/var

  # Mount the new filesystems

  Mount - a

  # Check that they are mounted and sizes are as expected

  DF h

  # Move your existing data into the new file systems

  MV/storage-orig/var/loginsight/storage/var/loginsight

  MV/storage-orig/core/loginsight/storage/core/loginsight

  # Remove empty directories

  rmdir Pei - v/storage-orig/var/storage-orig/core

  # Start services to the top

  start the loginsight service

• vCenter space 5.5 device issue/storage/core out of space

  

  as you can see I'm running out of space/storage/core, how can I clean this file or remove space reover?

  Hello

  You should be able to manually remove (rm - f file) some core placed in/storage/files.

  In doing so, he must free up space.

  Then, I recommend you to check this:

  Re: Problems with location CoreDumps VCVA

  Perhaps, it can be useful.

  Best regards

  Pablo

• Why my storage says complete when its not full

  My storage space seem to have stuck at 100% = 20 GB, even if I have deleted files. What to do?

  You will probably need to permanently delete files because they are held in an archive when you remove them.

  The easiest way is to use the CC app on your computer by going to the section files and selecting the option archive view, your web browser should open showing the files.

  Remove them by using the options on the page.

  Good luck

• Storage of 1 TB icloud is 'Full' instantly

  Hello

  I just bought a 1 TB of storage icloud and with the 1st attempt to copy a file, I got the message ' point 'Photos' cannot be copied because there is not enough free space. "

  How does the iCloud?  I bought the extra space in order to save my old NTFS hard drives so I could then wipe them and format them to HFS before returning data

  I am so - drag files directly from an external drive, so they are copied. It is true that the first case was big enough - 220 GB. So I went to smaller - 1 GB worked, 9 GB worked, but then 14 GB does not.

  Then I tried a few new smaller files - about 1 GB and they worked but then a record 2.6 GB failed.

  I tried 3 files totalling 39 GB of my local documents directory - and they moved (not copied) "instantly".

  What happens here? Is it because it's an external hard drive? Because it is NTFS? The fact that I have less than 1 GB of storage available on my boot drive it affect?

  Also - when I moved the data to local storage to icloud, when will I see the space on my local drive actually become free?

  In a perfect world, I really wish I could you select the 990 GB of several files on my external hard drive, and then drag to icloud only once - then leave from one day to the next, or more.

  Is this possible?

  Thank you

  If these data you "move" to iCloud aren't on your system drive, it is your question.

  iCloud is a synchronization between your local system drive and iCloud service. So if you copy data to an external hard drive, what you're doing is to copy it to your local HD and your iCloud drive.

  The message of the space isn't likely your system drive, icloud.

  The documents folder moved smoothly, because this content was already on your system disk. You just change the file locations.

  iCloud is NOT a hard drive in the sky that you can move data. It is a service of synchronization between the file called iCloud drive on your local system drive and iCloud himself.

  At the end of synchronization, they will have the same content. Same amount of occupied space.

  "In a perfect world, I really wish you select the 990 GB of several files on my external hard drive, and then drag to icloud only once - then leave from one day to the next, or more."

  N ° not like iCloud is currently being implemented.

• How can I send my music to icloud and free up storage on my ipad that is full

  I own an ipad and iphone 6. the ipad is about 4 years old approx. full of downloaded and transferred other CDs and my storage capacity is busiest. How can I send my music to icloud and free up storage on my ipad. My iphone has not been synchronized with ipad. Cannot update my ipad for this reason software also.

  Thank you very much

  You can send music in the cloud of a device. You can delete music, and if it's purchased iTunes music you (if it is still in the store and you have not reached the country since purchasing it) may of it redownload purchased in the iTunes Store app tab. Because you own music (for example copied from CD) you'd need have subscribed to Match iTunes on your computer and downloaded the music to her computer, to show him in the cloud.

  You have all your music in your computer's iTunes library? Update of the iOS via a computer version should also require less free space on the device (but the update via a computer requires your content in the iTunes library, the update process will take up a back, wipe the iPad and install the iOS update and restore the backup, the backup contains things such as your documents photos, contacts, settings, etc, music, apps, etc. is picked up in the iTunes library)

• Selection of an object without going through the full overview.

  I don't really know what it's called, but it's really annoying me.  When I select an object on my page and move it, instead of showing me the edge of the image to a fine quick display, it will give me a complete overview of the subject.  In previous versions of InDesign, you need to click and hold the unit object of about 3 seconds that your cursor turns into white for this live preview.  Preview live is useful sometimes, but not all the time.  It seems to me that it is now a default value of InDesign CS5.  I just bought an iMac 3.06 GHz with 8 GB of RAM and it goes so slow with this feature.  When designing in InDesign CS4, my mac steals.

  I was wondering if anyone finds this as annoying as I do and if there is a way to disable this feature.  I've had InDesign CS5 for almost a month now and have only used for design twice.  I've been designing everything in InDesign CS4 and CS5 Illustrator.

  I hope someone can help,

  Michael

  In the prefs on "live view drawing" delayed.

• When I click on the Firefox Start Page it goes to a full screen with the logo of Firefox... full page... nothing else showing... Help, please.

  Something went wrong when I was trying to figure out how to get my regular size rather than the full screen display. Cannot get any tools, options, etc. Only the logo of Firefox with the search bar... That's happened.?

  Normally the F11 key will pass you to the normal display mode (or in the display full-screen function of the current screen). Does it work?

  Mode full screen, drag your mouse point to the top must cause the toolbar area to slide down. Does it work?

  If Firefox is 'stuck' in the view full screen, the file that contains the dimensions of the window may become corrupted. You can rename the file to fix this problem, but it may also affect what bars are displayed (for example, if you are using the classic menu bar, you may need to which restart). Here's how:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  To open the page without having access to all the foregoing, either:

  • Hold down the ALT key and press H to activate the Help menu, release the ALT key and press T to display the troubleshooting information page
  • type or paste the following text in the search box of the start menu, and press ENTER:
    firefox.exe "about:support"

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  To exit Firefox do not have access to the foregoing:

  • Hold down the ALT key and press F to activate the menu file, release the ALT key and press x to trigger an exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Intel rapid storage / MSATA Question

  I have a HP Envy TouchSmart Ultrabook running windows 8. I had a problem with the fast storage disk intel / chip MSATA since I bought this laptop and I'm quite confused on how to fix. A few months after I first bought this laptop it crashed with a blue screen saying critical process is dead and after he collected the information he stop and came back as not found boot device. I immediately contacted HP and they sent me a USB windows 8 reinstall the kit that I ran and did a clean reinstall of windows 8. After doing this and everything set up on this subject, I closed the laptop for the night and he fell asleep. The awakening of the laptop in the morning, he said the same thing as before, critics of the process died and start the device not found. so, I called HP and expelled for a repair. In my opinion, that they put a new hard drive in it. Soon after getting it again it crashed for the second time, so I contacted HP and after complaining that they told me I could take it apart and try to fix it myself. They said as Caste drive / chip MSATA needed to take and to perform a new installation of windows, then reinstalling the drive of caste / chip MSATA and then install the latest version of the driver intel rapid storage, which I believe has been 12.5 after doing so, it has worked for 5 months I had no problems after I downloaded the new windows 8.1 and it ran for a few months with no problems. One day it froze on me and crashes on startup, I couldn't do a system restore and decided to just do a clean boot of windows 8 and start again because I had already saved my files before that, because my computer didn't have before. After doing a clean reinstall of windows 8, I installed the rapid storage driver intel 12.5 and after put my laptop to sleep he made the same critical process is dead as it did the past so I decided to take the chip reader/MSATA caste of my computer reinstall windows, then reinstall the drive/MSATA of caste and start and install the drive of fast storage intel 12.5 well that does not work after put to sleep it's the same critical process died. So I reinstalled windows 8 AGAIN but this time I was not installed fast storage drivers intel but after you put the laptop to sleep it still crashed with critics of the process is dead and so at this point I took the car of caste / MSATA chip out of the laptop and did a clean install of windows , but I have never reinstalled the MSATA chip, I just completely took it and after having put her to sleep WITHOUT PROBLEM, it didn't crash.

  I guess my question is my cell phone will be ok without the drive of Caste / MSATA chip in it? This seems to be the main reason for my computer crashing and it out makes the computer to run without crashing once he's asleep.

  Or maybe I need to install a new driver for fast storage intel?

  Given that I do not wish to install a rapid storage driver intel going there just to make my computer slower?

  Also I've ever heard call the chip MSATA, a reader of caste not to mention that the people of HP that has helped me the first time so I don't know if it is the correct term, I tried to look through forums, but has not found a solution to this problem any help will be greatly appreciated.

  I will try to update the bios and see if that would help solve the problem. But I think that it is due to a defective material that I removed the card SSD to the computer and it starts correctly.

  I still don't know how the different my laptop will be to not have a SSD inside card.

  It worked fine for a few days without the ssd, but what difference does he have it or not?

• Cannot create transport for storage request rule!

  Hello

  I need to hide all specific traffic from iSCSI or a specific protocol type, can any advice how to create a type of transport rule?

  I tried the below but does not:

  / var/log # esxcli kernel claimrule list storage

  Rule class class Type Plugin Matches

  ----------  -----  -------  ---------  ---------  ----------------------------------------

  Transport of runtime 0 MP transport NMP = usb

  MP 1 TIME transport transportation NMP = sata

  MP 2 PERIOD transport transport NMP = ide

  MP 3 TIME transport transportation NMP = block

  MP 4 TIME transport transportation NMP = unknown

  Duration of the MP 101 provider MASK_PATH model = DELL = Universal Xport

  MP 101 file another MASK_PATH = provider model DELL = Universal Xport

  MASK_PATH location MP 200 DURATION = vmhba33 channel adapter = 0 target = lun 0 = 0

  Adapter MASK_PATH MP 200 file location = vmhba33 channel 0 target = 0 = 0 lun =

  MP DURATION NMP provider = 65535 * model = *.

  / var/log #.

  Add the option/var/log # esxcli storage core claimrule - rule 380 - P r iscsi iqn - iqn.1998 - 01.com.vmware:esx02 - 48f816e4 - Mon 1 target t NMP

  Add the option/var/log # esxcli storage claimrule - rule - 390P NMP t core target-r iscsi iqn - iqn.1998 - 01.com.vmware:esx02 - 48f816e4 - Mon 2

  / var/log #.

  / var/log # esxcli kernel claimrule charge of storage of

  / var/log # esxcli storage claimrule core run

  A little unsure here if you try to hide all the paths of a specific provider, or if you try to hide the specific paths.

  If he's a salesman, you can do the following:

  list of esxcli storage vmfs

  Take the naa, t10. or eui. VMFS uuid

  esxcli storage device base list d 'uuid from above.

  This should then give you information such as:

  esxcli storage device base list d naa.600140541fe494bddcfcd369dd8cfdd2

  NAA.600140541fe494bddcfcd369dd8cfdd2

  Full name: SYNOLOGY iSCSI disk (naa.600140541fe494bddcfcd369dd8cfdd2)

  Definable display name: true

  Size: 854528

  Device type: Direct access

  Multichannel plugin: NMP

  Devfs Path: /vmfs/devices/disks/naa.600140541fe494bddcfcd369dd8cfdd2

  Seller: SYNOLOGY

  Model: iSCSI Storage

  Revision: 3.1

  SCSI level: 5

  Is nickname: false

  Status: on

  RDM Capable is: true

  Is Local: false

  Is removable: false

  SSD is: true

  Is Offline: false

  Is perpetually booked: false

  Size of the full sample in queue: 0

  Threshold of full queue: 0

  Thin Provisioning status: unknown

  Attached filters:

  VAAI status: unknown

  Other UID: vml.0200000000600140541fe494bddcfcd369dd8cfdd2695343534920

  Is the Local of SAS device: false

  Is Boot USB Device: false

  Not IOs in circulation with the opposite worlds: 32

  Then you could hide the path based on the vendor and model lines, the SYNOLOGY and iSCSI Storage in the example above:

  esxcli storage coreclaimrule add to the seller of the r - 101 t v - M SYNOLOGY iSCSI Storage Pei MASK_PATH

  * Above of iSCSI Storage may need to be in quotes, I didn't create the rule to test. "

  Load, run rescan.

  If I wanted to HIDE qualified iscsi, then I would do:

  list of esxcli storage base path

  Enter iqn name.

  for me it is

  Transport target details: IQN = iqn.2000 - 01.com.synology:DiskStation.Target - 1.9668f3fdb0

  Thus,.

  esxcli storage base claim rule add r - 101 - P MASK_PATH t r iscsi iqn - iqn.2000 - 01.com.synology:DiskStation.Target - 1.9668f3fdb0 - target lun x

  Load, run rescan.

  BTW, I have used 101 rule number in my examples, change this as it already exists.

  Let me know how you go.

  R

• Storage path details power Cli need script

  Hi, I need output to below command in excel as a script file unique powercli someone help me

  1 esxcfg-mpath - l

  2 list of esxcli storage base path

  3 list of nmp esxcli storage device

  Try like this

  & {Get-VMhost | %{}

  $esxcli = get-esxcli - VMHost $_

  $esxcli.storage.core.path.list)

  }} | Export-Csv-path c:\test.csv

• How to identify the Protocol of network storage using PowerCli

  Hi all

  Does anyone know how to identify the network storage protocol using Powercli? If you do could you please point me in the right direction and appropriate controls to be used.

  Thank you.

  See you soon

  With the Get-EsxCli cmdlet, you get to many of the features esxcli.

  Something like that

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list()
  

  You can use Select-Object to choose the specific properties of the returned objects.

  For example

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list() | Select RuntimeName,Transport
  

• ESX 4 + storage IBM y SUN + DUDASSS

  Hola a todos.

  In esta oportunidad tengo dudas con los storages.

  The cuento Primero no is nada of storages, cero. After aclarado the cuento esto:

  Want back/place IBM EXP3000 uno con discos SAS y uno vastante viejo, SUN StorEdge A5100 con discos FibreChannel.

  MI duda are: suponiendo ESX 4 me recognize las fibra while + las debo use algun software o drivers additional SAS placa para as ESX vea el raid nightclubs in los/place?

  The cuento como tengo pensado connect todo el material as tengo asi is imaginan structure completa:

  1 Server (ESX4 primario) IBM X 3400, pondria Plaça sas (para conectarlo al ibm storage) + 2 while fiber Gigabit (para conectarlo al Storage SUN) + 2 gigabit ethernet while para conectarlas a switch gigabit (24 ports of ethernet giga + fibra giga - 3com 2924 SFP PLUS 4).

  1 Server (ESX4 language) IBM X 3400 the pondria 2 fibra while Gigabit (para conectarlo al Storage SUN) + 2 while

  Gigabit Ethernet para conectarlas al switch that comment make con.

  The idea that're a servidor sea el ESX primario igual al than el storage IBM sea el repositorio las office primario. El segundo servidor junto con el storage SUN vendrian an alta disponivilidad ser. That opinan? o debo change?

  Any sugerencia're bienvenida pues no tengo mucha experiencia.

  Saludos is muchas gracias

  Hola muchodespues,

  No against los devices as mencionas como soportados (hooked algo rapido) pero if llega an andar realmente go suerte.

  The config del las fibra esta perfecto, 2 por cada ESX while while you da redundancia perfecta. Las while gigabit ethernet como would be ideal of mas - 2, 4-ports are UN muy buen.

  El storage SAS lo going to a local disco como worm, TR en instalacion del ESX probably no ves el puedes cargarle los storage drivers (if are there), caso contrario hay than worm if SO lo detecta default por el.

  Saludos!

  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  Best wishes / Saludos

  ________________________________________

  ING. Diego Quintana

  VCP 410 - VCP 310 - VAC - VTSP

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• The Core server crash

  Is there a process in place for if you Core server goes down and did a restart?

  I now use a deposit check.

  Thank you.

  Hi Olimism,

  Please get in touch with Support of Dell-AppAssure team to study the issue with the crash of the base.

  Thank you

  Anton Kolomiiets.

• Quad Core will greatly help with the encoding time?

  Currently I use core duo 3.0 gHz and make me a little better than the real-time encoding during the encoding of 720 x 480 mp4 format using H.264 compression.  A quad core is going to help at all?

  First, PE is going to take advantage of multiple cores, even if a middle of the road than quad (like an Intel Q6600 @ 2.4 ghz) will show an improvement over your existing Duo.

  If you move to a high end Quad Q9650 (3.0 GHz), or a Quad i7Core with multi-threading (essentaily 8 threads), you will see a significant improvement of encoding time.

  When Adobe gets to a 64-bit version of PE, will be then entered the promised land...

  If you like the cards processor, see this link:

  http://www.TomsHardware.com/charts/desktop-CPU-charts-Q3-2008/3DMark-Vantage-CPU, 817.html

  Just find your current CPU, and then look at what you get in addition to the one (assuming that money is no object)...