vCenter space 5.5 device issue/storage/core out of space

Similar Questions

• VCSA 5.5/storage/core is going to be FULL

  Hello

  What is the best way to clean these files under/storage/core in vcenter Unit 5.5...

  : / storage/core # ls

  Core.vpxd - worker.1009 core.vpxd - worker.12961 core.vpxd - worker.15191 core.vpxd - worker.20711 core.vpxd - worker.24951 core.vpxd - worker.3338 core.vpxd - worker.5847 core.vpxd - worker.7870

  Core.vpxd - worker.10543 core.vpxd - worker.1332 core.vpxd - worker.15311 core.vpxd - worker.20873 core.vpxd - worker.25023 core.vpxd - worker.3589 core.vpxd - worker.5917 core.vpxd - worker.8016

  Core.vpxd - worker.10577 core.vpxd - worker.13658 core.vpxd - worker.15363 core.vpxd - worker.21061 core.vpxd - worker.25090 core.vpxd - worker.378 core.vpxd - worker.592 core.vpxd - worker.8180

  Core.vpxd - worker.10700 core.vpxd - worker.14253 core.vpxd - worker.15485

  Thank you

  Here is VMware KB: KB VMware: VMware vCenter Server Appliance 5.0 vpxd crashes a few seconds after the start of

  To solve this problem because of the core dumps unannounced, filling of the partition:

  1. To connect to vCenter Server Appliance console as superuser. The default password is vmware.
  2. Change directory to/storage/core and run the ls command to verify the core files

     Note: If there is some unexpected dumps core, remove these landfills and try to restart the service. The problem should now be resolved.

  And here is a blog showing step by step: sharing knowledge: vCenter 5.x device space issue/storage/core out of space

• How to display this window that lists all the devices of storage connected to my PC?

  How to display this window that lists all the devices of storage connected to my PC? It lists each device, how much space is used and how much is free? I sometimes open it by accident, but I can never find it when I'm looking for it.

  original title: storage devices

  Beginning

  Control Panel

  If you the small icons view do the following:

  Administration tools

  Computer management

  Storage

  Disk Managment

  If you have the category view do the following:

  System and security

  Administration tools

  Computer management

  Storage

  Disk management

• / storage/core support missing

  I deployed a 3 x average cluster nodes and had run a few days before I started to notice a warning in vROPs that the storage has been insufficient.

  While they inspected the storage available in the monitor system LI for all 3 nodes and notice was one show only 7.3 GB of available compared to 233 GB on 2 other nodes.

  I ran the beam of support and research if the files I look at the df file and noticed that he was missing the mountains/storage/core and/storage/var from the node with the 7.3 GB available.

  I mode Mainteanance and restarted, node, but the mounts are not automatically returned.

  Is any way to restore?

  Is this a known issue?

  ---

  Details of DF for referance.

  DF.11422.txt

  1 K-blocks used available use % mounted on file system

  / dev/sda3 8115648 2798036 4905352 37%.

  udev 8233676 112 8233564 1% / dev

  tmpfs 8233676 60 8233616 1% / dev/shm

  / dev/sda1 130888 38204 85926 31% / Boot

  / dev/Map/Data-var 20642428 1525004 18068848 8% / storage/var

  / dev/Map/Data-Core 258026884 12947700 231972192 6% / storage/core

  DF.9537.txt

  1 K-blocks used available use % mounted on file system

  / dev/sda3 8115648 3604504 4098884 47%.

  udev 8233676 112 8233564 1% / dev

  tmpfs 8233676 8 8233668 1% / dev/shm

  / dev/sda1 130888 38204 85926 31% / Boot

  / dev/Map/Data-var 20642428 3685404 15908448 19% / storage/var

  / dev/Map/Data-Core 258026884 12847568 232072324 6% / storage/core

  DF.28260.txt

  1 K-blocks used available use % mounted on file system

  / dev/sda3 8115648 5030908 2672480 66%.

  udev 8233676 104 8233572 1% / dev

  tmpfs 8233676 56 8233620 1% / dev/shm

  / dev/sda1 130888 38204 85926 31% / Boot

  OK, so we have 270 GB of PV/VG and no LVs. That's the problem known in 3.0. A transitional storage for LVM configuration problem would result in Insight Log creation/Import/Storage on the filesystem root without the mount points. Log Insight 3.3 that better capture LVM provisioning errors and try again.

  We can address this in your environment without loss. The process is a little long and has a good number of moving parts, so stop and answer if you see something you don't expect.

  # Stop the log Insight service

  stop service loginsight

  # Remove existing data

  MV/Import/Storage/storage-orig

  # Create two LVs

  var lvcreate-L 20 G - n data

  database-l 100% FREE lvcreate - n

  # List of people - you should see something like this:

  LVS

  LV VG Attr LSize pool data origin % Move newspaper copy % Convert

  data var - wi - ao - 20.00 g

  database - wi - ao - 250, 00 g

  # Create a pair of fileystems

  mkfs-t ext3/dev/data/var

  mkfs-t ext3/dev/data/core

  # In an editor (vi) open/etc/fstab and add the two lines, one for each file system. Make sure that the file ends with a line break, or mount will complain.

  / dev/Data/var/storage/var ext3 defaults 0 2

  / dev/Data/Core/storage/core ext3 defaults 0 0

  # Make that two mount point directories

  mkdir Pei/storage/core/storage/var

  # Mount the new filesystems

  Mount - a

  # Check that they are mounted and sizes are as expected

  DF h

  # Move your existing data into the new file systems

  MV/storage-orig/var/loginsight/storage/var/loginsight

  MV/storage-orig/core/loginsight/storage/core/loginsight

  # Remove empty directories

  rmdir Pei - v/storage-orig/var/storage-orig/core

  # Start services to the top

  start the loginsight service

• Device Manager is showing "Other devices - Mass Storage Controller" as having no driver installed

  I noticed since I put Windows 7 on my laptop, the Device Manager is showing under 'Other devices' "mass storage controller" has no driver installed and has the famous yellow triangle and an exclamation point. I have a gateway MX6920, if this is of any help.

  Too bad.  I found the solution.

  In the case where you did not, go to:

  http://support.gateway.com/support/drivers/GetFile.asp?ID=21836&UID=290679

  Download driver, nav for cabins (location listed in the included readme file) folder, right-click the setup.exe and "compatibility test".  Go through the wizard and select the option "he worked directly with Windows XP SP2" and it should install with this compatibility.  My SD card reader just read my transflash Reader which contained my my Droid microSD card.  It's all good now.

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Impossible to install any device mass storage

  Hello

  I recently tried to copy data from a Flash drive to my PC. However, I have a lot of trouble with it.
  So I went and bought another one, but I still get the same problem. I also tried a drive external HARD, same problem here too.

  My problem is the following:
  When I connect mass storage devices to my PC the Hardware Wizard comes up and starts looking for readers, but it's never finds one and therefor does not install the mass storage device.
  Mass storage devices are working on other PC, my own friends.

  I've already updated Windows and I already deleted the USB and storage devices of mass from Device Manager if they are resettled. Unfortunately, none of the actions succeeded.

  I use a PC Pentium Dual Core, I bought around 2006. I use Windows XP Home Edition SP3.

  I hope someone can help me.

  Thank you for your time and your help.

  Hello

  Remove hidden devices by following steps:

  a. click view under view hidden devices

  b. expand all winks in Device Manager

  c. There will be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer restart the computer.

  2. you can also run the store and check out them below the results: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems

• MD vCenter Plugin version 2.5 problem storage array

  Hello

  OK, I installed the MD storage array vcenter plugin version 2.5 on my server vcenter.

  However, on my PC when I run the VI client I see under manage plugins, the ability to download and install the plugin. When I do that it fails with the error below:

  Storage array Dell MD-plug-in vCenter of Dell, Inc. 02.50.3600.0020
  People with disabilities
  Dell MD storage array
  Manager vCenter
  The following error occurred during the download of the plugin script of https://172.xx.xx.xx:8088 /
  vcenterconfig/configuration.xml:
  Request failed because of a logon failure. (Unable to connect to the remote server)

  Any idea on how to solve this problem? (DNS works very well)

  Thank you

  Hello NZJJ,

  It seems that the file you downloaded is correct just seems to be a problem in accessing.  Here is a link to the installation guide for the plugin.  I'll make sure that you install as recommended by us & see if you still get the same issue. FTP://FTP.Dell.com/manuals/common/PowerVault-md3200_Deployment%20Guide6_en-us.PDF

  Please let us know if you have any other questions.

• Need Vista drivers for the device of storage on the Satellite P100 - 10 p

  Laptop came with Vista Home Premium, updated for the company. Display driver did not managed to solve, but have still 2 points of mark yellow, namely:
  Mass storage device and unknown device - ideas?

  Have you checked the drivers Toshiba site but not sure as what to download.

  Hello

  Did you download the right drivers for the right series of notebook?
  Satellite P100 - 10 p belongs to the PSPAGE series.

  I think you should double-check the Toshiba forum page and be sure that you have downloaded and installed all the drivers available at 100%!

  I think you should check if you have also installed the Texas Instruments Flash Media driver.

  Last but not least the installation instruction has been placed on the page.
  If please follow the guidelines and install the drivers in the right installation order!

  concerning

• How can I save my iPad2 to a device of storage connected to my PC.

  I would like to save my iPad2 on a storage device that is connected to my PC. It's the same storage device that uses my PC. Can you help me? I have iOS 9.2.

  This 'device' is that what you use?

• Why have none of my devices of storage is more recognized?

  My storage devices - camera, USB drive, backup hard drive - are no longer recognized by my laptop.   I tried them on another computer and they work fine. The mouse and the printer work well in all USB ports.  Everything was fine when I made a backup on 10/16/11, but more than two weeks now I tried to solve the problem.  I deleted a few upgrades of Apple who came after the date. I can see the devices in the Device Manager when they are plugged in and I tried the suggestions on the uninstalling and reinstalling the drivers and I tried to change the drive letter, but nothing seems to work. I tried to temporarily disable Norton and which makes no difference.

  Hello

  1. what happens when you try to connect to the USB, the camera and the hard drive?

  2. think you that USB detected in Device Manager?

  3. do you get an error message?

  4. have you tried to connect the devices on the back USB ports?

  Method 1: Create a new user account.

  Follow the steps to create a new user account and check if the problem persists.

  Create a new user account and check if the problem persists.
  Follow the link below to create a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  If the problem is resolved in the new user account, you may have corrupted profile.
  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   

  Method 2: Perform a system restore.

  I suggest you do a system restore while working much earlier.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Z3 blackBerry my device and storage system is full.dont how to remove

  I tried to remove some applications.but yet, nothing seems to b reduction of the storage. The storage system seem to occupy as much space... Thank you I expect a quick help.

  Two copies:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-Z3/am-using-a-BlackBerry-Z3-please-HW-do-I-delete-...

• USB device mass storage 10 - Cont error code

  Sorry, I don't know how to continue my previous question, so I paste below the previous question and Gerry's response:

  Thanks for the reply of Gerry. As Gerry susgested, I saved a copy of the information in the system from my computer on OneDrive: https://onedrive.live.com/redir?resid=726A7FEFBD5F1CD3! 106 & authkey =! AMZZ0M3BTwlvxx4 & ithint = the file % 2ctxt.  I do not know how to analyze it, so I need help. According to the information on my computer system information that I have provided, there can someone show me what to do to solve my problem?

  Concerning

  Leo MS

  My problem is:

  I do not have the new device connected to my computer, but there is a warning on the 'USB Mass Storage Device' Device Manager as USB controller. In fact no problem when I attached all my computer USB storage, it can still read file in there. This problem makes my computer need a lot of time to boot. Even if I disable your device (which has a warning about it) my computer need even more time to start. I tried all efforts:

  1. I tried to update the driver of the device, we want to, but it did not work.

  2. I uninstalled all USB controller devices, but it did not work.

  3. I tried 'MicrosoftFixit' tool, but it didn't work.

  Is it possible to fix this error? What happened to my computer? I need help.

  Best regards

  Leo MS

  It is Gerry's response

  To solve most computer problems, it allows to watch the evidence available in the system information file and Event Viewer logs. An experienced eye can choose needles in a haystack and see more clearly the precise nature of the problem or problems. Newspapers aren't necessary for your specific problem observer of events.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  I hope this helps.

  Gerry
  Stourport, England

  Enquire the execution Plan

  Hi Leo,

  Thanks for the reply.

  Since it is a duplicate thread, you can continue to solve the problem in your previous post and you can refer to this section of the faq for more information on how to post a reply in the thread.

  Community Microsoft frequently asked Questions

  http://answers.Microsoft.com/en-us/page/FAQ

  Hope this information helps.

• import the stopped device, low storage

  my mobile application of lightroom cannot import photos more because the storage device is low.  How can I remove photos with that is no longer, I work?

  Hi Jot,

  You need to remove unwanted Applications and data from the memory of your Mobile phone.

  Kind regards

  Tanuj

• Safe to stop VCenter Server Services on device?

  I need to make a manual backup of the POSTGRES BD because of stale licenses problem.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2054008

  To do this, I need to make a manual backup of the DB before making changes, which requires that I have stop the Server of VMware Services on the device. What are the potential problems with stopping these services?

  
  

  
  

  
  

  Hello

  totally safe to restart services vcenter (process vxpd).

  Just the users connected to the vcenter sessions will be abandoned.

  Take a look at this:

  VMware KB: Stop, start or restart of vCenter Server Appliance services

  Best regards

  Pablo