/ storage/core support missing

Similar Questions

• Vista Premium home help and support missing by mistake reviews. How can I get that back

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Download the file here:

  Windows Help program (WinHlp32.exe) for Windows Vista

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5143

• My 25 character product key is not recognized, as well as the mass storage controller is missing.

  two problems RY5U870-ImageSensor06 not recognized as mass storage controller is not found

  My 25 character product key is not recognized as mass storage controller is missing and a meesage RY5U870_Image Sensor06 is not compatible. I use a computer laptop sony vaio a dell windows vista Home premium 32 - bit boot disk that I got no problem other than the unrecognized product key it for activation of windows has never been made. I hope that I have ave explained it well enough for someone to solve these issues. Dale a lot thanks

  The question of activation is because you cannot use a Dell OEM of Windows version to activate on a Sony.

  The questions ImageSensor and mass storage controller are likely due to the fact that the Dell installation media is not the device driver appropriate for your Sony computer motherboard.

  J W Stuart: http://www.pagestart.com

• VCSA 5.5/storage/core is going to be FULL

  Hello

  What is the best way to clean these files under/storage/core in vcenter Unit 5.5...

  : / storage/core # ls

  Core.vpxd - worker.1009 core.vpxd - worker.12961 core.vpxd - worker.15191 core.vpxd - worker.20711 core.vpxd - worker.24951 core.vpxd - worker.3338 core.vpxd - worker.5847 core.vpxd - worker.7870

  Core.vpxd - worker.10543 core.vpxd - worker.1332 core.vpxd - worker.15311 core.vpxd - worker.20873 core.vpxd - worker.25023 core.vpxd - worker.3589 core.vpxd - worker.5917 core.vpxd - worker.8016

  Core.vpxd - worker.10577 core.vpxd - worker.13658 core.vpxd - worker.15363 core.vpxd - worker.21061 core.vpxd - worker.25090 core.vpxd - worker.378 core.vpxd - worker.592 core.vpxd - worker.8180

  Core.vpxd - worker.10700 core.vpxd - worker.14253 core.vpxd - worker.15485

  Thank you

  Here is VMware KB: KB VMware: VMware vCenter Server Appliance 5.0 vpxd crashes a few seconds after the start of

  To solve this problem because of the core dumps unannounced, filling of the partition:

  1. To connect to vCenter Server Appliance console as superuser. The default password is vmware.
  2. Change directory to/storage/core and run the ls command to verify the core files

     Note: If there is some unexpected dumps core, remove these landfills and try to restart the service. The problem should now be resolved.

  And here is a blog showing step by step: sharing knowledge: vCenter 5.x device space issue/storage/core out of space

• vCenter space 5.5 device issue/storage/core out of space

  

  as you can see I'm running out of space/storage/core, how can I clean this file or remove space reover?

  Hello

  You should be able to manually remove (rm - f file) some core placed in/storage/files.

  In doing so, he must free up space.

  Then, I recommend you to check this:

  Re: Problems with location CoreDumps VCVA

  Perhaps, it can be useful.

  Best regards

  Pablo

• Driver Satellite M70-191 mass storage controller is missing

  Hello

  I have a Satellite M70-191 (only model PSM70E) laptop and today I tried to use my xd picture card but it does not work.

  I checked the device manager ==> system ==> mass storage controller and it seems that the drivers are not installed (code 28).

  Any ideas how I can fix this problem?

  thanx

  neo12

  Hello Ioannis

  You are 100% sure that the card is compatible with your laptop card reader. Check everything first before using it in the slot!

  The missing pilot is available on the European driver Toshiba page.
  The Cardbus driver must be installed to get the working card reader.

  Greetings

• Dual Core Support in Windows XP SP3

  I have a Windows XP SP3 machine that appears as a single base in the Task Manager. The processor is an Intel (r) Core (TM) 2 Duo CPU E7400 2.80 GHz. I thought that this issue was supposed to have been solved with SP3, but I do not.

  The computer was built with a clean Windows Home edition, then put installation upgraded to SP3.

  I have searched the net and did all the steps recommended-

  Make sure the box in msconfig is disabled

  Check the BIOS for MaxCPUid settings

  etc.

  However, nothing works, and it appears the version of Windows running is indeed one version of simple core based on the desription in the Device Manager.

  How can question - I get this machine to accept two hearts?

  Hmmm, if you have searched the web and tried everything and nothing works, then nothing probably will never.

  A quick search of 20 seconds on my part raised the following article which describes a 'hot - fix"Microsoft for a very similar sound problem.  I can assume that you have already tried, but in case you don't have it, it's here:

  "The number of physical hyperthreading-enabled processors or the number of physical multicore processors is incorrectly reported in Windows XP"
     <>http://support.Microsoft.com/kb/936235 >

  HTH,
  JW

• Processors quad core support in w550s model

  Are there plans to support processors image model w550s and when to expect if such plans exist?

  I7-5700HQ has a TDP of 47W. There is no way of w550s can dissipate the heat produced by a CPU and a GPU from 30W 47W.

• the mass storage controller is missing from my windows vista

  How can I get my mass storage controller in my windows vista back

  Hello

  You can view these methods:
  Method 1:
  You can try to remove all USB devices and try the pluggin back one at a time. Check exactly which device is causing issues.
   
  Method 2:
  You must update the latest version of the driver for the device and check the issue.
   
  Update a hardware driver that is not working properly (chipset/IDE controller/storage drivers)
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

   
  Method 3:
  To disable and re-enable the USB controllers, follow these steps:

  1. Click Startand then click run.

     Note If you are running Windows Vista, click Start, and then use the Search box.

  2. Type devmgmt.msc, and then click OK. Device Manager opens.
  3. Expand Bus USB controllers.

     Note You need to scroll the list to find this point.

  4. Right-click the first USB controller under Bus USB controllersand then click Uninstall to remove it.
  5. Repeat step 4 for each controller USB is listed under Bus USB controllers.
  6. Restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  7. Check the USB device to see if it works.

• BlackBerry Smartphones Core Apps missing 9720

  I would like to install the Russian language on my SIM free Blackberry 9720 bought in UK (Carphone Warehouse). As instructed, I try to find basic applications in Blackberry Desktop software, but there is no basic apps. After searching the forums, I tried to install software 9720 on my PC but only the O2 version is available and there is still no basic apps. Also I tried to launch the Blackberry Desktop Software with administrative rights, but nothing changes. How can I install Russian language on my 9720?

  I have two PC: Windows 7, Office 10 and win 8, office 10

  Hello and welcome to the community!

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.
  • Use this KB to guide you to choose the right OS package (which can be of any carrier):
  • • KB05305 Location of support for BlackBerry smartphones

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  Good luck and let us know!

• Removable storage to access folder is missing from the group policy under Administrative Templates\Systems

  Hello

  I intend to control the reading and writing of removable storage devices using Windows Server 2008 GPO.

  However, after reading the online group policy settings, when I tried to apply the GPO settings, I found that 'Access to removable storage' folder is missing from the group policy under administrative Templates\Systems.

  Please suggest others.

  Thank you

  Amit Jogi

  Hi Amit,

  Thanks for posting your query in Microsoft Community. However, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

  Thank you.

• Data recovery device storage supported

  Where can I find a list of storage devices supported by the device of data recovery?

  How can I detect if a given storage device can be used by the device of data recovery?

  Concerning

  Marius

  All storage devices located in VMware HCL + network CIFS shares are supported as target

  pelase see http://www.vmware.com/files/pdf/VMware_Data_Recovery_FAQ_4.21.09.pdf

• HP Pavilion m6 - 1068ca: missing drivers after windows reinstall (hard drive failure)

  Hi, I had to reinstall windows in a new hard drive after the failure of my hard drive by default. I couldn't find any drivers. Please help me find the drivers for my PC. The ID of material for the missing parts are the following:-

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C & REV_00
  

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112
  

  USB\VID_0A5C & PID_21E3

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C & REV_0A
  

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C & REV_14

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Thank you.

  Hello:

  For the smbus and usb controllers, try the AMD chipset driver.  The first file listed.  Install and reboot.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Standard VGA graphics card

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp57269.exe

  BCM20702A0

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp56715.exe

  Ethernet controller

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56952.exe

  PCI device

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56956.exe

  Unknown device

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56957.exe

• I am running Windows XP Home Edition. Recently, I was unable to boot my computer. Get always error message__ "Missing kernel file, insert the startup disk and restart" __How can I fix/find the missing file

  Core leader Missing, insert boot disk and restart

  amerirish50,

  Demarrer start from your XP CD in Recovery Console, and then run the following command

  sfc/scannow (you will need an XP CD for this command)

  If that is not correct the problem, then you can try to perform a repair installation.

  Windows XP installation options

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• vSphere 5.0 - Cluster Storage Chassis mounted - HA behavior?

  Hello together

  Edit: I cut a few lines to make the issue a bit more general.

  In this case, I focus on the scenario where two data centers get partitioned.

  In the case of the link LAN & CF will fail at the same time (DataCore) will not be able to deny access to any of the sites, both sites will have a functional storage.

  How will be vSphere HA respond?

  For now I guess:

  -vSphere 5.0

  -Datacenter A master HA

  -Only A datacenter has an active gateway

  -vCenter server resides in the data center B

  -Yes, this isn't a vMSC support solution

  Data Center has

  Data Center B

  The master in A datacenter will recognize that slaves hosts of datacenter B stopped sending heartbeats. Will expire the data store heart rate data center B guests Captain HA still receives heartbeats of his servants in A data center network The master in A datacenter will declare all datacenter B as dead hosts The master will restart VMS protected data center B

  In datacenter B hosts will recognize that the master data center has stopped sending heartbeats. Slaves will elect a new master Because all data center B hosts receive traffic election they trigger a reaction of isolation The new master will verify the poweron file and the protectedlist (or it will be contacted the vCenter server) to obtain the necessary information on virtual machines The master will restart VMS protected data center A

  Is this even possible or I missed something, and I am completely wrong?

  In the case where the vCenter server is running in A data center, the new master elected at least could use the protectedlist and the file poweron, could it not?

  With vSphere 4.1 it should also be possible in case there is at least a main node in each data center?

  For the moment, I see no solution to stop that from happening (without losing the flexibility of a vSphere cluster) but not using a remote storage not supported "cluster"?

  Concerning

  Patrick

  I don't know DataCore well enough to say anything on this subject from a storage perspective, but it seems that what you're saying is that in the case of a partition of site / half brain data warehouses will be 'active' on both sides?

  If this is the case then your assumptions are true and the results could be disastrous.

  Not sure why you would use a solution like that to be honest. I sure hope they have the notion of "bias of the site" / "site preferences".