VersaMail error

Similar Questions

• VersaMail - 'Unable to resolve name' mail server error

  I had an intermittent but frequent with VersaMail problem when I try to connect to get my email.  Often, I receive the following message:

  "Cannot resolve the name pop.mindspring.com. Check your DNS settings or enter the IP address of your mail server. »

  I also occasionally get to my Yahoo.com e-mail addresses, is not unique to Mindspring.com.  Sometimes, often, but sometimes I get no problem, so settings I seem to work - when they want to.  Needless to say, it's frustrating and annoying, so if anyone has a way to solve this problem, I would appreciate knowing.

  Thank you.

  Problem solved!  I had google for answers and found an explanation of DNS servers on another forum where someone had a similar problem.  It seems that DNS servers simply take the domain name use us and find the IP address for this domain name, then hang us up to this IP address.  I was getting the error message was that I had to check my DNS settings or enter the IP address, so it seemed logical to me that if I could ignore these servers DNS Dingo with their "now, I'm going to do, now I do not want" bad attitude, maybe I could connect directly with mail servers.  Your tip on how to find the IP address of mail servers in scathing them was the missing piece, I needed.  I deleted the names of POP and SMTP servers for each account that I have would establish in VersaMail, replacing them with the appropriate IP addresses and I can connect now reliable with all servers, first time, every time - and lightning -fast.

  Thanks for your help!

  Message relates to: Palm TX

• VersaMail on Treo 755 Server error

  Hello!

  I have a treo 755, when I tried to get my mail this morning, I got the following error

  "A server name has not been entered. Please set the preferences to the server.

  Where am I supposed to put in place the server preferences?  are there useful links on how to solve this problem?

  my email is through microsoft Exchange 2003 Server

  I googled the error message but have been unable to find anything on how to solve this problem

  any suggestions would be wonderful

  Thank you!

  Kelly

  Have you checked the account settings?

  The versamail Guide to see how to open an exchange account, and then change the settings for the server name. You can check all the account settings to ensure that they are correct.

  If the settings are correct, you can create a new account exchange with the settings and see if it can resolve the issue. You will need to use a different account for the new e-mail account name.

• VersaMail blocks (resets) my TX

  I had a Palm TX for over a year and it's worked perfectly, until last night.  All of a sudden, any time that I typed on Email, it would open the VersaMail program and then, before I could type still a choice of menu, the screen turns off and the Palm would reset, apparently a soft reset.  I then googled for ideas and answers on how to solve this problem and tried to do what seemed like the agreement on the initial solution, download and install of go, then delete all the files showing the creator as asc3 or asc4. While some of them have been removed, others are remained, and some, I got error messages in the sense of "error: c:data opened in Item::remove (d)" [or something like that].  Now when I click on send, all nothing happens.

  To resolve this issue with any pain and agony, compatible with good results, my questions are the following:

  (A) have I done everything I can do with the approach that I tried, or is there something extra, perhaps another step, I need to do in order to continue this process and make it work?

  (B) if I watered now that 'fix' so that it would never work, or if it was not allowed to start, where to go from here?  Can I just delete VersaMail on my handheld and reload, or leaving always embarrassing or corrupt files on the handheld?  Do I have to do a hard reset and reload all my apps my Palm Desktop?  What is the best and safest approach here?

  (C) is it necessary or desirable for me to do a Hot Sync before you make any more 'fixing' of this problem?  I synchronize my handheld and Palm Desktop computer several times a day, so I guess I can just restore my last backup sync to my desktop, which has been done before I tried to delete the files and got these error messages.  My concern is that if I had to Hot Sync now, before any new 'fix' can be suggested, I might end up ruining the VersaMail files on the desktop.  Is this true?  If so, I'm happy to lose some data minimum I could entered since my before last "fix" Hot Sync and play it safe.

  Thank you very much in advance for any help!

  Al

  Thanks for your reply.  In the interval between my last post and your response, I did some research on Google and found the following link:

  http://KB.Palm.com/SRVS/cgi-bin/WEBCGI.exe?new, ts = Palm_External2001, k = PalmSupportKB, case = obj(36541)

  Although it is the Treo650, it described exactly my problem with my TX, so I gave it a try.  I tried the one-step approach, simply delete the files created by 'asc3' and 'asc4', but when I then did a HotSync, the problem comes back, so I assumed that HotSync has been recharging my problem and Texas.  Accordingly, I went to step two approach, which was to delete these files, then rename the VersaMail subfolder in my Palm user folder and delete the two relevant files from my backup subfolder.  I just did that last night, but so far it seems to be stable, even after a HotSync.  I have another problem with the connection, but I had it before and which will display separately.  As much as I can say at this stage, this current issue is resolved.

  Thanks for your help.  I really appreciate it.

  Message relates to: Palm TX

• VersaMail - cannot send e-mail

  Hello

  Is there another software email in addition to VersaMail can I use phone Palm Treo 755 p for Verizon?  I can receive emails via VersaMail, but cannot send them.  I get this error... 553 authentication is required.  My email is a pop.  I read the manual and checked the Palm website, but can't find a solution to this problem.  Any suggestion or help would be appreciated.  Thank you.

  Failed to send is 99% of the time caused by one of two things. One, Verizon is blocking not verizon SMTP servers. Set up an account of the Association and use the Server SMTP from Verizon. Second part SMTP misconfiguration e-mail settings. Did you check SSL, or SMTP authication required?

  Message relates to: None

• Error: Failed to SyncDeleteDB for ZLib = SYNCERR_REMOTE_SYS, 4015,16405,4015

  I have a Palm Treo 700 p.  I have sinc using Versamail.  I get this error when I try to perform a hotsync.  Anyone know how to fix this error?

  You will need to contact the system on the server and the account administrator. There is nothing you can do by using the Treo to change the settings of the server. Everything you can do on the Treo is using the exchnage server settings to set up your account.

  Message relates to: Palm i705

• Cannot send mail on Treo 700 p - Versa mail error message

  I can receive my email very well on my Palm, but when I go to "send to email", I get an error message that says "Versamail #5.5.1 500 command not recognized" & don't send it.

  Immediately after this error message, an order is listed as "STARTTLS" or "AUTH LOGIN"? That would help to identify where the device and the server are getting hung up.

  Message is about: Treo 800w (Sprint)

• VersaMail and Exchange Server

  Hello

  I currently own a Treo 755 p with Sprint. I tried to set up my v3.5.5 Versamail with Exchange Activesync, and I keep getting errors when I try to put in place.

  When I set up my account and click on test, it seems OK.

  But when I click on SYNC, I get the following error message:

  "AirSAMStateMachine.c 2214 6 HTTP/1.1 403 forbidden to request Connection: Keep-Alive Date: Fri, 28 Aug 2009 03:04:49 GMT Content - type: you.

  I already know that if I go to the web app on my palm and put the address that I'm trying to get to work:

  htpps://webmail. Fiserv.com

  When I go on the web on my laptop and enter the same address as the address is automatically changed to:

  https://webmail.Fiserv.com/exchweb/bin/auth/OWALogon.asp?URL=https: //webmail.fiserv.com/Exchange&reason=0

  Any ideas please?  I am open to using ANY player of mail. I know that a lot of people in my company has access to email using their PDA (Blachberry), but I want to keep my Palm.

  Thank you

  Hello Arnaud,.

  Thanks for your help. I don't think that my apartment IT will make the changes for me. It seems I'm out of luck... or I have to go to the Blackberry (puaj!) ... sniff sniff

  You said I can try the version of VersaMail laters (version 4, published for the Center). Do you know if this works for the Treo 755 p on Sprint?

  Thanks for your great help.

  Diego

• Can't send emails using Versamail 4.0.1 form my Palm Centro (open - ATT - on the Rogers network).

  Good afternoon. I use a Palm Centro, I just bought (unlocked - from ATT - on the Rogers network). Everything works very well BUT the sending of e-mails. VersaMail receives very well but refuses to send it. It does everything that I try to send in the "Outbox" and then tries to send only to say later that he could not be sent. The server that I cross is a pop server. He never gave me such a problem before - all the tips!

  Steve

  Combining the email provider or your wireless provider?  Make believe is a provider of hosting services if a recall.  Your first post stated your Rogers wireless provider so if that's the case then please try their SMTP address.  The test settings covers only typos errors while the communication with the server protocol is another.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!

• A fact error 4014 showing each time after all the steps

  One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

  I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

  Thank you for your help and appreciate it.

  I found the solution. Just type here for others with the same problem to solve their problems.

  While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

  Thank you for your support and more.