Similar Questions

• ASA5505-SEC-PL Vs ASA5505-SEC-BUN-K9

  Hello gentlemen and ladies.

  I have a question about licensing on the SAA. I found on a Cisco's Web site the following:

  Cisco ASA 5505 Security Plus bundle ASA5505-SEC-BUN-K9

  #Includes cisco ASA 5505, unlimited number of users, switch 8-port Fast Ethernet, firewall stateful, 25 VPN IPsec peers, 2 peers of SSL VPN, stateless active / standby high availability, dual ISP support, support of DMZ, 3DES/AES license and 1 extension housing

  #Cisco ASA 5505 Security Plus bundle ASA5505-SEC-PL

  Cisco ASA 5505 Security Plus's license (provides high without active state availability / standby dual ISP, DMZ support, supported VLAN trunking and session increased and support capacity peer IPSec VPN)

  Issues related to the:

  (a) what is the difference between the two? other than the obvious like VLAN Trunking and increased session and peer VPN capabilities

  (b) can take us about which we can get is one of them or a license and the other is a collection of products (including the hardware + license)

  I get conflicting information from people so wanted to get this settled once and for all

  Thank you very much in advance

  Knoa IT

  It is an update license of all or nothing, and it is the only one offered.

• ASA5510-SEC-BUN-K9 bundle

  Hello. I have a question about ASA 5510 SEC-BUN-K9 bundle that our company has ordered a K9 bundle, but when I enter the command show version on the ASA, I see that the system image file is named asa706 - k8.bin.

  Is this normal or were there a mix to the top as on the box it says it's a bundle of K9.

  Igor

  It is not a mixup or a problem. It is normal that the name of the image to say k8 when ASA is described as a beam of K9. The names are incompatible, but the ASA should work as you expect it.

  HTH

  Rick

• This version of Cisco Adaptive Security Appliance Software Version 9.6 (1) 5 is affected by Cisco Adaptive Security Appliance SNMP Remote Code execution vulnerability and Cisco Adaptive Security Appliance CLI Remote Code execution vulnerability of

  This version of Cisco Adaptive Security Appliance Software Version 9.6 (1) 5 is affected by Cisco Adaptive Security Appliance SNMP Remote Code execution vulnerability and Cisco Adaptive Security Appliance CLI Remote Code execution vulnerability of

  Hi vrian_colaba,

  You can take a look at cisco's Advisory here:

  https://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CI...

  Fixed versions

  Cisco ASA Major Release	First version fixed
  7.2	Affected; migrate to 9.1.7(9) or later
  8.0	Affected; migrate to 9.1.7(9) or later
  8.1	Affected; migrate to 9.1.7(9) or later
  8.2	Affected; migrate to 9.1.7(9) or later
  8.3	Affected; migrate to 9.1.7(9) or later
  8.4	Affected; migrate to 9.1.7(9) or later
  8.5	Affected; migrate to 9.1.7(9) or later
  8.6	Affected; migrate to 9.1.7(9) or later
  8.7	Affected; migrate to 9.1.7(9) or later
  9.0	9.0.4 (40)
  9.1	9.1.7(9)
  9.2	9.2.4 (14)
  9.3	9.3.3 (10)
  9.4	9.4.3(8) ETA 26/08/2016
  9.5	9.5 (3) ETA 30/08/2016
  9.6 (DFT)	9.6.1 (11) / 6.0.1(2) FTD
  9.6 (ASA)	9.6.2

  5 9.6 (1) is not part of the fixed versions, this means that is assigned for the SNMP Remote Code execution vulnerability.

  Cisco Adaptive Security Appliance CLI Remote Code vulnerability to run you can also take a look at cisco's Advisory here:

  https://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CI...

  Fixed versions

  The following table shows the first software versions that include fixes for this vulnerability (9.6 is not affected)

  Cisco ASA Major Release	First version fixed
  7.2	Affected, migrate to 8.4 (3) or later
  8.0	Affected, migrate to 8.4 (3) or later
  8.1	Affected, migrate to 8.4 (3) or later
  8.2	Affected, migrate to 8.4 (3) or later
  8.3	Affected, migrate to 8.4 (3) or later
  8.4	8.4 (3)
  8.5	Affected, migrate to 9.0 (1) or later version
  8.6	Affected, migrate to 9.0 (1) or later version
  8.7	Affected, migrate to 9.0 (1) or later version
  9.0	9.0 (1)
  9.1	Not affected
  9.2	Not affected
  9.3	Not affected
  9.4	Not affected
  9.5	Not affected
  9.6	Not affected

  Hope this info helps!

  Note If you help!

  -JP-

• What version of Cisco IP Communicator supports to UC520?

  Model: UC520

  IOS version: 12.4 (20) T4

  CME: 7.0

  What version of Cisco IP Communicator supports to UC520 with CME7.0?

  Release Notes of IP Communicator is not included CME7.0 in the supported versions.

  http://www.Cisco.com/en/us/products/SW/voicesw/ps5475/prod_release_notes_list.html

  Please advise, thank you.

  Any version.

  However, you must update UC500, because it is very old.

• Version of Cisco ACS 5.1.0.44.3 integrate with active directory server from Microsoft windows 2012?

  Version of Cisco ACS 5.1.0.44.3 integrate with active directory Microsoft windows 2012 R2 server?

  Unfortunately, it does not support R2 2012

  5.1 ACS supports all editions of:

  Windows Active Directory (AD) 2000

  Windows AD 2003

  Windows AD 2003 R2

  Windows AD 2008

  Source

  Windows AD 2012 R2 is supported after ACS 5.5 patch 1 and following.

  Source

  Please find below the steps to go from 5.1 to 5.5 hotfix 1:

  STEP	FILE	COMMAND
  Apply the 5.1 patch 6	5-1-0-44 - 6.tar.gpg	ACS patch install repository 5-1-0-44 - 6.tar.gpg ftp_repository_name
  Apply 5.3	ACS_5.3.0.40.tar.gz	application upgrade ACS_5.3.0.40.tar.gz ftp_repository_name
  Apply the patch 5.3 8	5-3-0-40 - 8.tar.gpg	ACS patch install repository 5-3-0-40 - 8.tar.gpg ftp_repository_name
  Apply the sharp Patch	Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg	ACS patch installs Pointed-PreUpgrade -CSCum04132- 5-3-0 - 40.tar.gpg repository ftp_repository_name
  Apply 5.5	ACS_5.5.0.46.tar.gz	application upgrade ACS_5.5.0.46.tar.gz ftp_repository_name
  Apply the patch 5.5 1	5-5-0-46 - 1.tar.gpg	ACS patch install repository 5-5-0-46 - 1.tar.gpg ftp_repository_name

  Best regards ~ jousset

• Script to check the version of Cisco VEM on ESXi host

  Hallo,

  I need help, a script to check and report in a CSV file, the version of Cisco Nexus 1000v VEM on all ESXi hosts connected to a vCenter.

  Basically, "vem version - v" but for all the ESXi hosts connected to a vCenter.

  Thank you

  Joseph

  I suspect you could use PowerShell v1, in this version that the Export-Csv has not had the UseCulture parameter.

  Try to run the script without this parameter.

  But I would strongly suggest to upgrade your version of PowerShell (v3 is available)

• Upgrade version of CISCO IPS signature

  Hi guys:

  Anyone know the process for updating the signature on a CISCO IPS version, I want to do it manually. If somedoy can tell me the orders and all I have to do this.

  Concerning

  Luis;

  Updats manual signature for Cisco IPS sensors can be performed from the CLI as shown here:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_system_images.html#wp1142504

  Or from the interface of the IDM as shown here:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/IDM/idm_sensor_management.html#wp2126670

  This process is also used to upgrade software base of the probe.

  Scott

• How can I get a trial version of cisco ACS 5.4

  Hi guys:

  I would get a trial version of GBA 5.4 for educational purposes (certification LAB). I know that it is possible to download the ISO file of www.cisco.com, but when a try to download the file with my cisco CCO get a message asking me "an additional fee required. Do you know how can I get this software?

  PD: I was able to download a trial of this software (file *.lic) license, but I want to install the ACS in a VMWARE server and play with him. I need the ISO file.

  Thank you very much for your help

  Kind regards.

  Martin

  CCNA-CCNP-CCGD

  Certified Engineer

  Cisco limited offer of trial copies of some of its products. Those that are linked from here:

  http://www.Cisco.com/go/nmsevals

  In General, if it is not there, it is not available as a trial version. It is usually not Cisco policy to provide all the software trial for teaching and laboratory use.

  If you are working with a Cisco or a partner account manager, you will get an exception on a case-by-case basis.

• See the version for Cisco Blocker

  Hello

  As I am not really tech savvy here, we currently have a problem where we need to check a serial number for blocker of Cisco. However, the customer says that they didn't show version and we provided instead the system state information. However, her, we can derive the correct serial No. Anyone who is familiar with how to interpret the State of the system to get the correct serial number for Cisbo Blocker? Or are there other options that the customer can give us to get the correct serial number?

  I enclose the status of the system provided by the customer.

  Thank you

  Cathy

  Spare part

  BV277F1 is a valid serial number for blocker of Cisco.

• IPS on the version of cisco 2911 (15.0 (1) M3)

  Hello

  Could someone guide me please? I'm under cisco 2911:

  ********************

  Cisco IOS, C2900 software software (C2900-UNIVERSALK9-M), Version 15.0 M3 (1), REL

  EASY SOFTWARE (fc2)

  IPS license status: not installed

  Current date: October 8, 2011

  Expiry date: not available

  Date of extension: not available

  Loading signatures: not available S0.0

  Signature package: not available S0.0

  Cisco IOS, C2900 software software (C2900-UNIVERSALK9-M), Version 15.0 M3 (1), REL

  EASY SOFTWARE (fc2)

  ******************

  When I run the show ip ips:

  IPS license status: not installed
  Current date: October 8, 2011
  Expiry date: not available
  Date of extension: not available
  Loading signatures: not available S0.0
  Signature package: not available S0.0

  Do I have to buy a license for software only, or should I buy a saparate for IPS module work?  How would the license be about?

  Help

  You can run IOS IPS on the 2911 router, however, you must purchase the license IOS IPS to be able to run the IOS IPS feature. Not sure how the license, it is best if you ask Cisco reseller/partner and they would be able to help others with a price.

• Cisco still sells router-AP (wireless routers) for domestic use

  Well, do not really know where to ask
  But what is described

  Cisco router-point of access is great and fearsome performance for a domestic use, but cisco is still for sale? If so, can someone give me a link to the list of products?
  Think so just to clarify, I'm not talking about Linksys wireless routers :)

  If you are looking for equipment of the company, so it's Cisco, but since they let go the Linksys line, it is not any kind of home router AP. Cisco has an SME but that may not be what you want too.

  http://www.Cisco.com/Cisco/Web/solutions/Small_Business/products/wireles...

  Scott

• I want to buy an ASA5505-SEC-BUN-K9 - online license key

  Hello guys I want to buy Cisco ASA 5505 license key by Online, so please can someone speak to me a very useful way to buy for this license - urgent please

  I guess that you do not have a dealer realtionship. In this case, go to Amazon.com and pick a.

  For example:

  http://www.Amazon.com/ASA-5505-sec-plus-license/DP/B000MFORRA

• Integration of CISCO ISE with another controller wireless lan of the seller

  Hi all!

  I am currently working on an assignment and eager to integrate the identity service provider in the network. the only problem is that the deployed wireless network earlier of another provider I just need to know that either ISE has integration with the other controller feature wireless provider and can provide guest access control. The LDAP integration is also required.

  Waiting for help!

  Hello

  According to my knowledge Yes, Cisco ISE can be integrated with another controller wireless LAN of the seller, but limited. (Aruba, Rukus) and if you want to add the external identity group to your network, then LDAP integration is required.

• Does anyone know if the version of Cisco Clean Access Server supports the 4.1 (8) SHA - 256 signed SSL certificates?

  Yes, I know they are very old servers and technically, we should move away from CASES in total. But unfortunately, it's an environment I inherited, and I am now dealing with issues.  Because of the requirement to move away from sha - 1 signed certificates that I need to replace my existing certs, certs signature sha-256.  But before I do that I would like to know if anyone knows if CASE version 4.1 (8) supports SHA - 256 certificates?  I did check the release notes, but there is no mention of the supported versions of SHA, etc..  I tried TACS but no joy there either, etc..

  Hello Rafael,.

  SHA - 2 signed the certificate of support was added in 4.7.2 for SCS and CAM.

  We have filed a default document to have it documented in the release notes.
  CSCud99946    Note of support for the NAC should say we support certs of SHA - 2

  Kind regards

  Jousset