Versions SOA Suite and JDeveloper

Similar Questions

• Installation guide for BPM SOA Suite and Oracle 11g

  Does anyone know of a good installation guide for a new installation of the following SOA and BPM of Oracle 11 g (Windows 64 bit)?
  
  I'm looking to the 'Setup Guide quick for Oracle SOA Suite and Oracle Business Process Management Suite 11 g Release 1"(http://download.oracle.com/docs/cd/E14571_01/install.1111/e14318.pdf), but it is a bit dated (April 2010) and I see that is missing a few steps.
  
  Thank you

  Take a look at the for Oracle SOA Suite 11 g 1 material (http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf) Quick Start Guide.

  The steps that do not appear in the document you mentioned are included in this document. It takes you through the necessary extra step for the installation of Oracle BPM. Although for 11.1.1.4, it works very well for implementing 11.1.15 in a DEV environment.

  Dan

• Problem installing Oracle Quick Guide Oracle SOA Suite and Oracle BPM

  I have Windows 7 64 bit. I need Oracle BPM with BPMN 2.0 so I found the download page and:
  http://download.Oracle.com/docs/CD/E17904_01/install.1111/e14318/qisoa.htm#CACEFEFB
  I downloaded everything and started the installation. I followed the document until paragraph 2.4.2.4 and I'm getting following error:
  2011-03-08 23:07:22.501 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.PrereqTask::execute: Prereq evaluation failed
  oracle.sysman.assistants.rcu.backend.validation.PrereqException: UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
  Refer to the journal of the RCUS to C:\Oracle\rcuHome\rcu\log\logdir.2011-03-08_22-59\rcu.log for more details.
  at oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator.executePrereqTask(PrereqEvaluator.java:642)
  at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:68)
  at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
  at java.lang.Thread.run(Thread.java:619)
  
  2011-03-08 23:07:22.502 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: UCR failed
  oracle.sysman.assistants.common.task.TaskExecutionException: UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
  Refer to the journal of the RCUS to C:\Oracle\rcuHome\rcu\log\logdir.2011-03-08_22-59\rcu.log for more details.
  RCU - 6107:DB prerequisites for Init Param failed: process
  Current value is 40. It must be greater than or equal to 200.
  
  at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)
  at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
  at java.lang.Thread.run(Thread.java:619)
  
  I tried to simply select all packages, but I still get the same error.
  
  Help pliz

  It's easy to miss in the installation instructions.

  Try this. Using SQLPlus, bump the 'process' parameter (with apologies to Heidi to cut out of the book):

  SQL > show parameter session
  SQL > show parameter processes
  SQL > alter system reset sessions scope = spfile sid ='* ';
  SQL > change processes control system = 300 scope = spfile;
  SQL > shutdown immediate
  SQL > startup
  SQL > show parameter session
  SQL > show parameter processes

  Dan

• Need help to install health card in Oracle SOA Suite 11.1.1.5.0

  Hello world
  I'm fairly new to SOA Suite and try to learn it free out of curiosity.
  
  The problem is I want to do some POC for healthcare scenarios, as I currently work in a basic health project.
  
  I installed Oracle SOA Suite 11.1.1.5.0. As part of the SOA Suite installation, the following components have been installed.
  1 oracle database
  2 Weblogic server
  3. REGIONAL COORDINATION UNIT
  4 SOA Suite
  5 JDeveloper
  6 extension for JDeveloper SOA
  
  Therefore, to improve the SOA Suite for the construction of scenarios of healthcare, I'm stuck upward with the following questions:
  
  1. what install everything?
  2. where can I find the downloadable necessary?
  3. how to install it?
  
  Thank you all.
  
  Published by: 973335 on November 26, 2012 18:45

  The problem is I want to do some POC for healthcare scenarios, as I currently work in a basic health project.

  If you want to work on a CEP then please use Oracle SOA 11.1.1.6 for the integration of health care. It is not recommended to use the PS4 (11.1.1.5).

  For PS5 (11.1.1.6), instructions are here-

  http://www.Oracle.com/technetwork/middleware/healthcare/downloads/index.html

  You can view any query connects to Oracle SOA Suite for HI B2B forum.

  Integration - B2B

  Kind regards
  Anuj

• SOA Suite & Suite of Weblogic licenses

  Hello
  I need help to understand the difference between SOA Suite and Suite of Weblogic licences.
  If we have the intention of executing SOA suite, is to say that we need a license of SOA Suite and Weblogic Suice license or simply to have a licens SOA Suite.
  Thank you
  Concerning
  / Martin
  
  Edited by: 890736 oct-13-2011 03:58

  Hi Martin
  As far as I know, the licenses are different for these two products.
  1 Weblogic Server has its own license and this Weblogic Suite DO NOT include all of the SOA Suite components. It includes just coherence and weblogic server.
  2 SOA Suite has its own license and that don't include any Weblogic Server. SOA Suite includes as rules of trade by components, BPM, soa, BAM, etc. WebServicesManagement. Now, this SOA Suite can be installed only on the Weblogic Server.

  So if you want to use SOA/BPM Suite, then first you must purchase a license for Weblogic Server. Then buy license Suite SOA/BPM.

  That's how it was 2 years back when 11.3 SOA was released. I think that same thing also applies to the latest versions.

  Incase if licensing has changed recently, I hope that someone on the team of Oracle products, can share their views.

  Thank you
  Ravi Jegga

• SOA Suite 11g includes the OSB?

  What is the difference between OSB and BSE.
  BSE is a component of the SOA Suite and it can connect to various services.
  OSB has more functions such as dynamic routing and enrichment of the Message. If I buy just SOA suite, can I use OSB? Or I have to buy OSB if I want to use it in my application that contains the components of SOA.

  I think with the permit SOA suite 11 g, you can use the OSB. No need to buy it separately. You can view-

  Difference between BSE and aqualogic service bus
  What are the differences between BSE 10 g and 10g of OSB
  More SOA and differences of OSB

  Kind regards
  Anuj

• Nullpoint exception when start JDeveloper 12.1.3 with SOA suite

  One met the exceptions below then start JDeveloper 12.1.3 with SOA suite? This led to I can not save the workspace, very bad.

  JDeveloper version: Build JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S

  Version of the JDK: java version "1.7.0_80".

  trace of the stack as below:

  SEVERE:

  javax.naming.NamingException [Root exception is java.lang.NullPointerException]

  	at oracle.adf.share.jndi.ContextImpl.throwNamingException(ContextImpl.java:671)
  	at oracle.adf.share.jndi.ContextImpl.saveDocument(ContextImpl.java:968)
  	at oracle.adf.share.jndi.ContextImpl.save(ContextImpl.java:986)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.refreshInternal(ConnectionNsChangeListener.java:242)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.refresh(ConnectionNsChangeListener.java:180)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.objectAdded(ConnectionNsChangeListener.java:43)
  	...
  	at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
  	at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  Caused by: java.lang.NullPointerException

  	at oracle.jdevimpl.jps.JpsConfigUtilsImpl.getDefaultJpsContext(JpsConfigUtilsImpl.java:722)
  	at oracle.jdevimpl.jps.JpsConfigUtilsImpl.getCredentialStoreLocation(JpsConfigUtilsImpl.java:1407)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.checkInitCSFStore(CSFDTCredentialStore.java:333)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.fetchCredential(CSFDTCredentialStore.java:588)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.fetchCredential(CSFDTCredentialStore.java:578)
  	at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
  	at oracle.adf.share.jndi.CredentialStoreHelper.fetchCredential(CredentialStoreHelper.java:104)
  	at oracle.adf.share.jndi.ReferenceStoreHelper.saveCredentialsInternal(ReferenceStoreHelper.java:520)
  	at oracle.adf.share.jndi.ReferenceStoreHelper.saveCredentials(ReferenceStoreHelper.java:476)
  	at oracle.adf.share.jndi.ContextImpl.saveDocument(ContextImpl.java:957)
  	... more than 123

  Thanks guys,.

  finally found the problem, one that has created this app, forgot to add 3 files below to Git, after that I added these files, the problem disappeared.

  and I also applied the paths that you mentioned.

  src/META-INF/cwallet.sso

  src/META-INF/cwallet.sso.lck

  src/META-INF/jps-config.xml

  the sit of the guy in front of me has me a bar of chocolate.

  Thanks for the reply.

• SOA Suite Demo MIMEService - impossible of execution/debug in this version.

  Hello
  
  I get the error message "MimeService.bpel cannot be run/debug in this version" after the opening of the sample project in JDeveloper and selecting 'run '.
  
  Compilation works well even if:
  The successful compilation: 0 errors, 0 warnings.
  
  I installed the SOA Suite 10.1.3.1 and also tried after update to 10.1.3.3.
  I tried v10.1.3.1 and v10.1.3.2 for JDeveloper,
  
  Any suggestions?
  
  Thank you
  Fabian

  You cannot run a BPEL process in JDeveloper, you can only deploy to the SOA server and test it there.

  Marc

• Calculation of the licenses for Weblogic and SOA Suite

  Hi gurus,

  Being an oracle DBA, I give myself a task to calculate for a weblogic suite and soa oracle licenses. I went through a few docs, but there are many jargon that I didn't understand.

  If someone could please help me get information below

  (1) how the oracle County allows for WEBLOGIC and SOA suite. Does rely on the counts of base as in the case of Enterprise edition?

  (2) how to find information on licenses. Any support notes?

  Kind regards

  Lancerique.

  Hi there Lancerique,

  (1) how the oracle County allows for WEBLOGIC and SOA suite. Does rely on the counts of base as in the case of Enterprise edition?

  Oracle has the licenses of WebLogic Server (Enterprise Edition and Suite) and SOA Suite in the same way they do for EA DB, i.e. using the basic factor and multiplying by the number of cores. I'm sure you're familiar with the hard and soft political partitioning of Oracle (to run the Oracle products in virtualized environment)

  (2) how to find information on licenses. Any support notes?

  As for the database, Oracle provides "Licensing information" contained in the documentation. You can find details about what is included in each of the FMW SKU licensed by Oracle. For the 12.1.3 version, you can find the license here news - Oracle Fusion Middleware Licensing Information Manual® - materials.

  You should consider the development and test environments, if you plan to build their. They must also be licensed.

  And one more Council - as FMW products consist of several components, if you want to run the individual component on different machines (for example, Oracle BAM and Oracle SOA on a machine running on another) must summarize all hearts (in the example for the two machines) that run the prod.

  And when you're done with the counting I recommend contact you the representative office of Oracle you check the calculations.

  Hope this helps,

  A.

• Difference between SOA Suite 64 Bit and SOA Suite 32 Bit

  Hello

  I'm new to SOA. I want to install SOA Suite 64 Bit on my laptop with 64-bit system and a window 8 64-bit.

  I'm curious to know what what is the difference between SOA Suite 64 Bit and SOA Suite 32 Bit.

  There are various facilities available for the 64-bit and 32-bit?

  Or

  The facilities are same for 64-bit and 32-bit, but it's only depends on whether the JDK is 64-bit or 32-bit.

  Thank you

  Prashant jegou

  Hi Prashant, there.

  If you use the JDK that is bundled with WLS, I think that you have installed 32 - bit.

  The best way to check is to run java-version on the prompt of the JDK that helps run the suite servers SOA. Another approach is to examine the server log and files where the start is unloaded and you should be able to see the seller of the JVM and architecture.

  To install WLS 64-bit, you must use the generic installation program (.jar) which requires a JDK 64 - bit pre-installed. And then on top, with installation of SOA.

  I never tried to SOA on 32-bit and I think that it is not stable at all due to the limited segment size you can allocate for the JVM.

  Hope this helps,

  Anatoli

• How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

  Hello

  I have a use case in which I'll call synchronous external Web Service and the form of this service, I get the answer after 80 seconds.

  I know that this console form EM soa-infra-> SOA Administration-> BPEL proprieties-> under 'more BPEL Configuration Properties..' in SyncMaxWaitTime can I change the default 45 second in 80 seconds, but it will apply to all synchronous services in this area, and I want only the value appeal of Web Service of particular external reference (link partner).

  For the limit of timeout for the particular web service (partner of external reference link):

  I saw a post at < http://www.mandsconsulting.com/asynchronous-vs-synchronous-bpel-processes > in which there is an option in 'Link partner Edit' form property tab dialog box, we can add "timeout" property but in SOA Suite11.1.1.7 I am not able to find this property form the list.

  on this post < http://abhishek-soablog.blogspot.in/2010/06/timeout-for-partnerlink.html > is also described the same way, but it's just the source code of the highest way of GUI to set the timeout property and it does not work with a new version.

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  Thank you

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  VR;

  Click em-> composite-> Services and references-> select need to reference and click on-> properties: 'HTTP Timeout of read' and 'HTTP timeout.

  developing composites:

  Click on a reference-> property inspector-> link properties-> plu green and add oracle.webservices.httpConnTimeout with the necessary value and oracle.webservices.httpReadTimeout with the necessary value

  for the same domain defined: oracle.webservices.local.optimization = false

  You can watch

  Administration of Web Services - 11g Release 1 (11.1.1.7)

  How to set a timeout for a Web Service in SOA 11 g (Doc ID 979683.1)

  SOA 11 g: political malpractice not to intercept 'service Endpoint unreachable' error (Doc ID 1503989.1)

• OSB and SOA Suite 11.1.1.7 new features?

  Hello
  
  I couldn't find information on all the new features in Oracle Service Bus, and the release of Oracle SOA Suite 11.1.1.7. (I know about adaptive management in BPM 11.1.1.7)
  Does anyone have a link for that?
  
  And if anyone needs it, here is the link for the resolved and known issues in this version: http://www.oracle.com/technetwork/middleware/docs/aiasoarelnotesps6-1866030.html#servbus
  
  Thank you and best regards,
  Abhishek

  Oracle SOA Suite PS6 (11.1.1.7.0) is now available

  Kind regards
  Anuj

• SOA Suite 10g and SOA Suite 11g? What are the major changes in these two?

  Hi Experts,
  I'd be curious to know about Soa Suite 11 g. SOA Suite 10 g SOA Suite 11 g, BPEL changes? What are the major changes in these two product/tool wise? Is now OSB belongs to Soa Suite 11 g? It would be useful for us to know what are the major changes and updates or changes came to 11g.
  
  Please share this valuable information.
  
  Is it that no matter what version is still running Oracle, which has not yet officially launched with oracle?

  Hello

  I think that the most important changes are:
  1. move on Weblogic Server.
  2. creation of a unified period. Which means that everything plugs into it. SOA, BPM, OSB, B2B...

  Additional features like the NDA: Composites within network-based event. SDO: Service Data Objects to transfer information and from db, adf (if I'm not mistaken)
  Tighter integration with the ADF.

  A few extensions to BPEL. Such as the events of Signal etc. Don't know if it's standard or specific to Oracle extension.

  But you get the idea. A lot of changes, a lot of things improved and move functionality.

  For more information:
  http://www.Oracle.com/technetwork/middleware/soasuite/Overview/index.html
  For 11g PS1: http://www.oracle.com/technetwork/middleware/soasuite/soa-11gr1-ps1-new-features-096000.html
  For 11g PS2: http://www.oracle.com/technetwork/middleware/soasuite/soa-11gr1-ps2-new-features-097680.html

  I hope this helps.
  Kind regards
  Nils

• Install SOA Suite on the WLS integrated into JDeveloper

  Hello
  
  I wonder if it is possible to install SOA suite on the integrated WebLogic provided with JDeveloper?
  
  If it is not possible, what is the recommended method for commissioning for development? It is to install a real WebLogic & SOA Suite on each developer's machine?

  Hi Mark,

  No, it is not possible to install SOA on the WLS integrated into JDeveloper. There are a few technical problems preventing now, but we would like to get this to work in the future.

  So yes, you can install the full WLS + SOA on your own machine for development. After installing, go to WLS and disable everything that you do not reduce the footprint (for example, you need not also good soa and bpm composer composer, you don't need so much worklist and workspace).

  Heidi.

• Can I use the same Weblogic Server for soa suite 11 g and OSB panels?

  Hi all
  
  Is it possible to use the same server weblogic for SOA suite 11 and OSB?

  Hi Arun,

  SOA 11 g is running on weblogic version 10.3.2 OSB is running on weblogic 10.3, so you can't have two SOA suite 11 g and the OSB on weblogic even (not EVEN in the two areas of same weblogic). You must have two facilities of weblogic. (at this time)

  After the next release of OSB (planned for H2), you can run both the same weblogic.

  Kind regards
  Anuj