Problem installing Oracle Quick Guide Oracle SOA Suite and Oracle BPM

Similar Questions

• Installation guide for BPM SOA Suite and Oracle 11g

  Does anyone know of a good installation guide for a new installation of the following SOA and BPM of Oracle 11 g (Windows 64 bit)?
  
  I'm looking to the 'Setup Guide quick for Oracle SOA Suite and Oracle Business Process Management Suite 11 g Release 1"(http://download.oracle.com/docs/cd/E14571_01/install.1111/e14318.pdf), but it is a bit dated (April 2010) and I see that is missing a few steps.
  
  Thank you

  Take a look at the for Oracle SOA Suite 11 g 1 material (http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf) Quick Start Guide.

  The steps that do not appear in the document you mentioned are included in this document. It takes you through the necessary extra step for the installation of Oracle BPM. Although for 11.1.1.4, it works very well for implementing 11.1.15 in a DEV environment.

  Dan

• Just installed CC paid for the full suite and when I go to open an application, it crashes.

  Hello

  I just installed CC paid for the full suite and when I go to open an application, it crashes.

  If the problem is on Mac, this article may be able to help.

  CC 2015 crash on launch applications | Mac OS

  ml https://helpx.adobe.com/Creative-Cloud/KB/CC-2015-applications-Crash-on-Launch---Mac-OS.HT

• Problem installing Oracle Application R12.1.1

  During the installation of Oracle Application R12.1.1 installation I face this error,
  Windows cannot find «.\jre\NT\1.5.0\bin\java ". Make sure you typed the name correctly and then try again.
  
  Please someone idea to solve this problem

  Asad,

  Please see this thread.

  Steps for installing Oracle E-Business Suite R12 on Windows XP
  Steps for installing Oracle E-Business Suite R12 on Windows XP

  Kind regards
  Hussein

• Problem installing oracle 11 g 2 in a virtual machine with IP dynamic

  Hello

  I have install oracle 11 g 2 on a virtual machine in Vmware workstation with dynamic IP address.

  Then I noticed that the global database name is orcl.16.27.57, and the identifier service oracle is orcl on step 10 of window 19

  There will be a configuration manager warning and the company failed due to the following error:

  Listening is not or the database service is not registered with it.

  And even I change the name of global database for orcl, it has also failed.

  When I use the static IP, the name of the database world so SID is orcl.

  then complete the installation.

  So I don't know what the reason is, how to install it without warning during the dynamic use of IP.

  Whenever I have install oracle with static IP, I can't continue like that again.

  Help!

  Thank you

  Now, I'm happy to say it works. Two methods to solve this problem.

  1. install Microsoft Loopback adapt

  2 edit the file hosts, IP hostname

  Of course, we can run them both.

  Thank you

• problem installing Oracle 10 g.

  I am struggling to install oracle 10g on my windows operating system 7. I run the installer mode compatible windows xp. After the installation at the time of the creation of the database, it displays the error-
  ORA - denied 12546:TNS:permission
  and database creation will fail... I am logged on as administrator... I am really tapped, decommissioning of my XP os seems to be the only way out.i don't want to do that... If not possible, please suggest the version of oracle compatible with win7.
  Please help me...

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Versions SOA Suite and JDeveloper

  Hello.
  
  I speak with a French FRY on the use of SOA Suite 10.1.3.5 and JDeveloper 10.1.3.5.
  
  He asks me where are the docs at comprove why do we recommend to use the same version of the suite soa and jdeveloper.
  
  Can you help me with some links?

  Please see "Deployment JDeveloper for SOA Certification [ID 732969.1]" note on metalink.

  Kind regards
  Anuj

• Problem installing Oracle 11.2 on Red hat Linux 6.0 (86x_64)

  Hello!!

  When I try to run the .runInstaller file it returns after error.

  Check the Temp space: must be greater than 80 MB.   Real 24791 MB	Past
  Check the swap space: must be greater than 150 MB.   Real 1535 MB	Past
  Monitor: must be configured to display at least 256 colors.	real 16777216	Past

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2013-10-17_12-11-23 AM. Please wait... [data oracle@tushar] $ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2013-10-17_12-11-23AM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: no such file or directory

  in java.lang.ClassLoader$ NativeLibrary.load (Native Method)

  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)

  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)

  at java.lang.Runtime.load0(Runtime.java:769)

  at java.lang.System.load(System.java:968)

  in java.lang.ClassLoader$ NativeLibrary.load (Native Method)

  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)

  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668)

  at java.lang.Runtime.loadLibrary0(Runtime.java:822)

  at java.lang.System.loadLibrary(System.java:993)

  at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.awt.Toolkit.loadLibraries(Toolkit.java:1509)

  in java.awt.Toolkit. < clinit > (Toolkit.java:1530)

  at com.jgoodies.looks.LookUtils.isLowResolution (unknown Source)

  to com.jgoodies.looks.LookUtils. < clinit >(Unknown Source)

  to com.jgoodies.looks.plastic.PlasticLookAndFeel. < clinit > (PlasticLookAndFeel.java:122)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:242)

  at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)

  at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)

  at oracle.install.commons.util.Application.startup(Application.java:758)

  at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)

  at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)

  at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)

  at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)

  at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

  So I would know I missed any package during the installation of Linux, or is there any other problem?  If yes then what package should I install?

  My ORACLE_BASE = / u01/app/oracle

  ORACLE_HOME =/u01/app/oracle/product/11.2.0/dbhome_1

  ORACLE_SID = orcl

  Thank you and best regards...

  Tushar

  Hello

  So I would know I missed any package during the installation of Linux, or is there any other problem?

  Yes, you missed some pre-required fixes. Please, find and install rpm libXext. Make sure that you install all dependent plans as well.

  Thank you &

  Best regards

• Problem installing Oracle 11g reports

  I am trying to install reports Oracle 11 g, but when I try to run a report with graphs the following message appears:
  
  REP-108 - java.lang.NoClassDefFoundError:
  javax/servlet/GSI/tagext/TagLibraryInfo
  
  The report works fine in Oracle 10 g and 9g reports
  
  I use:
  Windows 7 64
  JDK7 64
  WebLogic 10.3.6
  Oracle Forms and reports 11.1.2.0
  
  Anyone know what what could be?

  Hello Fernando,

  Could you open rwrun.jar in Jdeveloper and check the classpath in the manifest.
  I remembered that I had a problem on this(11.1.1.3 version) when rwrun.jar called a jar file javax.jsp_1.1.0.0_2 - 1.jar which does not exist in the installation (there was a newer version as javax.jsp_1.2.0.0_2 - 1.jar in the installation).

  Would not normally happen at 11 GR 2, but give it a try.

  Kind regards
  Alex

• Problem installing Oracle 10

  Hello
  
  As requested, I open a new thread for this problem, with additional details...
  
  I try to install 10g on my laptop (Windows XP SP3) and when the installer of the universe embarks on the DOS window, it is said that no preconditions will be checked because an ini file is missing and then I get the infamous Microsoft Error window "send error report / do not send error report" and I can do no other. I tried version 11 earlier and it worked fine. But I need the 10g version so that Toad to work.
  
  Additional information:
  
  In the DOS window, it says:
  
  From Oracle Universal Installer...
  No verification requirements found in oraparam.ini, no prerequisite system controls will be carried out.
  Preparations for the launch of Oracle Universal Installer from C:\DOCUME~1\ROBERT~1\LOCALS~1\Temp\OraInstall2008-12-16-07-40-47AM. Please wait...
  
  Then, I get the error of Microsoft window:
  
  Oui.exe
  
  Oui.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
  Please tell this problem to Microsoft. so forth and so
  
  Debug... Send error report... Do not send
  
  Also, I rebooted in safe mode and logged as administrator and have the same problem.
  
  Help, please!
  
  Thank you
  
  Bob

  Bob,

  Keep us informed, once your DBA tells userid and password, you should be albe to connect. Using sqlplus or sql developer? You can use everything, but in order to confirm this order do

  sqlplus username/password@youservicename
  or
  sqlplus username/password

  Concerning

• Problem installing Oracle Application Server 10.1.3.1

  Hello
  
  I try to install the Oracle process server on linux and I installed it on before similar boxes without any problems, however this time after I finished the installation, it does not show me the console business. It gives a message of successful installation but with the following message.
  
  Control for the application server console does not run in this instance of Oracle application server. You can manage that instance remotely by another instance of Oracle Application Server is configured to run the Application Server Control Console.
  
  What should I do to get the administration console. I also looked around and saw but cylindre emctl isn't there in the ORACLE_HOME/bin
  
  Published by: user9938780 on December 11, 2008 11:34

  the 10.1.3.1 version does not use emctl

  If you do a status - app opmnctl you can see your applications, one of them is ascontrol

  You can reach the emconsole by http://hostname:7777 / em

  to start you can issue opmnctl startproc application = ascontrol

  Reg

  Michel

  Published by: MichelS on December 11, 2008 11:53

  Published by: MichelS on December 11, 2008 11:54

• Problem installing Oracle 11 g 2 RAC - rpm packages

  People,
  
  Hello.
  I was installing RAC Oracle Database 11 g 2 system with 2 Virtual Machines (rac1 and rac2) in 3 VMPlayer.
  
  When to install the extra rpm package, I need to download and install the following 3 files:
  
  libaio-devel - 0.3.106
  SYSSTAT - 7.0.2
  unixODBC-devel - 2.2.11
  
  But I can't find anywhere to download the 3 files above.
  
  Can any folk tell me where to download the 3 files "libaio-devel - 0.3.106, sysstat - 7.0.2, unixODBC-devel - 2.2.11?
  
  
  Thank you.

  Hello

  Mount the DVD media and check the server / directory.

  # cd //Server
  # ls libaio-devel-0.3.106*
  # ls sysstat-7.0.2*
  # ls unixODBC-devel-2.2.11*
  

  I could find in the "Enterprise-R5-U6-Server-x86_64-dvd.iso" of the ISO file.
  I could find also all 3 files in Oracle Enterprise Linux 5.5 x 86 32-bit CD-ROM media #3.
  (from the "Enterprise-R5-U5-Server-i386-disc3.iso" file.)

  And type the rpm command to install.

  # rpm -ihU 
  

  Good luck

• Size of the table space increases too quickly (DEV_MDS of soa suite 11g)

  I use Oracle 11g SOASuite.
  
  We are facing a problem of database (table space). After each schema deployment that dev_mds increases of 40 MB. We are therefore very often our processes in the development stage. and while cancellation of the deployment of the process. Ideally the memory should be freed. but it's not free memory.
  
  Please, help me out of this problem. and it will be appreciated if someone will explain how this schema size increases too quickly.
  
  Thank you

  Whenever you cancel the deployment a composite of a partition in the composite EM console gets also deleted from the MDS store. But since you must keep all versions of your composite, that your MDS store is bound to grow with each deployment.

  As you mentioned that your size of the composite is huge due to activity of embedded java, it's something that your design should be avoided because there is no resuability for your component java embedded in several versions of the same composite or composite.

  If you are wanting to use Java in your BPEL process I recommend to use a resalable composite with a context of spring that you can reference from different composite materials or different versions of the same composite.

  It also gives you an advantage in terms of modularisation your application, because whenever you need to change your composite Java or BPEL, they can be changed and deployed independently.

• Vista - problems installing of Adobe Reader 9.1, Silverlight and Service Pack 2

  Last week, my computer froze with a black screen.  Person software Dell in India has accompanied me through the webcam and drivers and reinstall Vista.  Since then, I can't open .pdf files, watching movies from Netflix or download Vista service pack 2.  I tried all the things I could find in the forums here and elsewhere.  The last thing I tried to download was Adobe Reader 9.1 and I'm able to save to my desktop but when I double click the icon and try to install this is the error I get:

  Error 2755. Server returned an unexpected error 1632
  Try to install the package
  C:\Users\Jano\AppData\Local\Adobe\Reader
  9.1\Setup Files\AcroRead.msi.

  weaver400,
  I suggest a few things at this stage.  First of all, I would like to check the hard disk for errors.  This link will guide you in this process: http://windowshelp.microsoft.com/Windows/en-US/Help/bc1393cf-9f9c-79c7-0f91-9337c2c41f811033.mspx

  Once that works I suggest creating a user profile, make sure that it is set to administrator level, then log in there and attempt to run the SFC from there.  Here are the instructions to create a new account:

  1.	Open accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, and then clicking user accounts.
  2.	Click Manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3.	Click create a new account.
  4.	Type the name that you want to assign to the user account, click an account type, and then click create an account.

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PROBLEM INSTALLING MATLAB IN WINDOWS 8 IT STUCK AND FROZE PC, TAKING MORE THAN AN HOUR...

  I use sony vaio windows 8 last week I reset my pc to the factory reset and all apps are uninstall, my problem is that matlabR2011 was previously able to install and he could run, but now, when I tried to install it stuck and froze for more than an hour sometimes I need to force stop please help me install... it will be very grateful...

  According to their release page, OS supported higher is Windows 7.

  http://www.MathWorks.com/support/sysreq/release2011b/index.html

  While a response from the user on the Compatibility Center Windows 8 indicates the following:

  The highest operating system that can be used with MATLAB R2011b is Windows 7. However; newer version of MATLAB2012a can be used in Windows 8.

  See here

  Try to contact the MathWorks support for how to get a patch, a new version that works with Windows 8.1:

  http://www.MathWorks.com/support/contact_us/index.html