Vertical lines at the bottom of page

Similar Questions

• Vertical line to the bottom of the screen on Satellite L10

  Does anyone know what caused or how to fix a line that appeared to the bottom of my screen from top to bottom?
  I have a purchased Satellite L10 new only in February. The line is pink and has background images, showing so I na? t think that fallout pixel... also if I print screen, you do not see the line once I have copy and paste cant anyone help?
  Thank you very much... Liz

  Hello

  I don t think you will be able to solve this problem yourself.
  In my opinion there must be something wrong with the hardware.
  You should ask the Toshiba service partner in your country for help.

• KDL-52W4100 vertical line to the bottom of the screen

  My beautiful Sony Bravia KDL - 52W4100 LCD TV has developed the dreaded thin blue line on-screen running vertically, from top down, about 4 inches from the right edge. I spent $2500 more than three years ago and have to say that I am VERY disappointed. I spent a lot of money on this TV waited MANY years of service. Customer support directed me to two local garage but the writing is on the wall - it seems many Sonys develop this blue line of death. Three years of life for a top of the line TV is unacceptable. I really hope Sony intensifies and that just makes me...

  UPDATE: I wrote to Sony and their response was they were sorry I was not completely satisfied with my TV and recommended that I'll get it fixed. Thanks for this useful suggestion. They should be embarrassed that such an expensive product would fail after normal use of light, in only 3 years. Now only am not completely satisfied with the TV, so I'm ENTIRELY happy with their service.

• kColor Laserjet CP1215 - blue lines at the bottom of page

  My LaserJet CP1215 began about 2 cm long printing blue lines every 2 cm on each side of a sheet of paper on the side of the printer.  I ran clean Page twice and also printed at least 100 sheets of paper to remove any toner that can be had on the machine.  However, nothing has worked, and the printer still prints blue lines.  Interestingly, no blue lines appeared on the own Page book when I put it to run.

  Any advice would be very welcome.  Thank you

  Hi Susieb,

  I don't know what you mean that "blue is bloodshed." Do you mean it is loose toner inside the printer cartridge?

  You did "eleven Solution: identify and replace the problem print cartridge'? '" These steps help to identify if the problem is with a cartridge, or if the printer should be cleaned more.

  If you have a cartridge that leak, sometimes there will be a loose toner inside the printer. It looks like the brilliantly colored or black dust. Some new cartridges come with a cleaning cloth (they ones I've seen are yellow/orange). If you don't, I'd get a type Microfiber cloth to wipe it off upwards.  If you get any on you or on your clothes, do not hot water to clean! The heat will set the color. Use only cold water.

  Another thought is that the imaging drum is damaged. In this case, you would need a new cartridge to solve the problem.

  If the cartridges are genuine HP cartridges, it is possible that they are under warranty. You can call the HP Technical Support to see if they are under warranty. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

• CP2020 leaving 2 vertical lines on the printed pages

  Our CP2020 has began to leave the two vertical lines to the bottom of every printed page - more print on the page, the more visible the lines. I printed a test page and join to view.

  We don't have any kind of warranty or service contract but I am the IT Manager and can do an interview or anything else that is necessary, I don't know what needs to be done to solve this problem. Thank you!!

  Replace the black toner cartridge if lines are only in black.

• Pavilion dv 6928: vertical lines on the lower part of the screen.

  I met with vertical lines on the bottom of my screen and it's still there. When you restart, sometimes immediately. I read where someone else had the same problem and it would come and go at will... any ideas? See post on 03/01/15

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are having problems with your laptop display. We will surely help you with this problem

  1. Please check if the display screen / laptop showing lines even in BIOS or not

  Note: Turn on the computer laptop and typing on the F10 key to access the BIOS

  2. Please tilt the laptop display slowly to the back and the front, check and check

  If the lines are visible to all the corners of the screen

  3 Please connect an external monitor to your laptop and check if the lines are displayed on the external monitor

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Inkjet HP 8600 printer: I get lines to the bottom of the page when I scan but not when I print

  I can receive faxes and print from the computer perfectly but when I scan and send it comes with lines to the bottom of the page.

  I used HP doc nothing helps.

  Hi there @Psych1324,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that when you scan and fax one page there are lines on the subject.  I'm happy to help you with this.

  Try to make a copy using the glass, then a second using the ADF and compare two copies. Both have lines or not only made using the ADF?

  In addition, it is the document that you used? HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans. If this isn't the case, please do. Special attention to the part where a copy had the lines. If it's the ADF then it's probably something on the glass of the ADF, as the dust, or small sheet of ink, or something similar. Be complete in cleaning up this article and then test with another copy using the ADF, to see if there is an improvement.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• I'm getting a vertical line in the middle of the page when I use the ADF on my Officejet Pro 8500 a but

  HP Officejet Pro 8500

  Windows XP

  No error message

  No changes to the system

  Scan using the ADF puts a vertical line in the middle of the scanned page.  This does not happen when I scan from the flat screen

  Brian, this is going to be a pretty easy fix. What you're going to need to get is a lint cloth (as a microfibre cloth or a filter coffee) and get just a wet touch. Then, open the top of your printer to reveal the glass. There are two sections, one large, and that is a thin strip of glass on the left side. If the line makes its appearance in the ADF scans/copies only - clean this thin section with a moist, lint cloth.

  This should help you!

  More information here: https://www.youtube.com/watch?v=SPdwUKnrDgM

  Let me know and have a great day!

• HP Pavilion Notebook 14-n271tx: a vertical line in the middle of my screen

  Hey there, I would like to know more about the vertical line in the middle of the screen of my laptop. There will be a white vertical line in the middle of my screen sometimes but when I adjust the position of my laptop, it disappears. Can I know why is it happening? Is it because of problems in the system or what? How can I solve this problem? What I send to HP customer Service to solve this problem?

  Hi @DustMidnight85

  Welcome to the HP Forums!

  This is a wonderful place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with the display, but if you change the position of the screen, it disappears.

  Here is a link to the display quality problems that can help.

  As you said it disappears when you reposition the screen, that the connection cable can become loose or damaged opening and closing the display.

  Here is a link to laptop HP Pavilion 14, HP Pavilion 14 Touchsmart laptop, HP Pavilion 14 Touchsmart Ultrabook, maintenance and Service of Guide. Chapter 4 page 36 has removal instructions that can help you check for this problem.

  If your laptop is under warranty or you wish to help please contact HP support for assistance.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• HP 8740: Vertical lines, while the scanning & photocopies

  I bought a new HP8740 about three weeks ago and everything worked well until today.

  Now I have black vertical lines down the scan or photocopy.

  First of all, I turned off the printer for 30 seconds and put the plug directly into the wall.  It did not work.

  I turned off - unplugged for 5 minutes - but still has the black lines.

  Can someone please suggest something else I can try.

  Hello @gouldian, thank you very much for your answer.

  The only difference between the analysis of the dumpster and using the ADF is where scanning occurs. Uses of the ADF Strip glass (1 "wide) toward the left side of the pane of glass for analysis. Cleaning if ideally white scanner ADF lid and glass ADF scanner should have solved the problem.

  I suggest you to do a blank copy on ADF, keep the page in front of you and carefully clean the place, you get the line in the band scanner & the white plastic strip.

  If the issue is always I suggest you to clean the ADF mechanism itself. You can watch a video of HP http://hp.care/2bYt7Qu that will help you to do this. The video is made using the Officejet 8600 printer, but it's the same for your printer as well.

  Please let me know what happens. Thank you!

  See you soon

• Blue vertical line on the screen of the Qosmio G20

  A few minutes ago, I was surfing the web and from nowhere share an apperead to the blue vertical line on the screen.
  A blue vertical line near the middle of the screen and crosses the screen all the up toward the bottom.

  If I'm looking at a white background, the line is undetectable, but if it is colored, it comes right thru.

  Please don't tell me they are dead... hoooo pixels... I am now, life away from any toshiba repair shop and I get a guarantee...
  I think that I bought 3 years ago. Need urgent help

  Hey Susana

  I wouldn't say it s a lack of dead pixel, but to me, it looks like a more serious problem.
  It looks like a malfunction of the graphics card. But to be sure, you should try to connect the external monitor to the computer and check if the same vertical line will appear on the second screen.

  If you're going to see the same line on the external monitor, then I assume that the question of the vertical blue line might be linked to the GPU fault.
  This could be the case value because the chip graphic card cannot be replaced. You need to replace the whole motherboard :(

  So, as you see it s not easy to solve this problem and I really recommend to contact a technician who has more experience with these laptop problems.

  Good luck

• Action/Script Photoshop to place the vertical line at the center of the Image

  How to create an action (or a script) in Photoshop that creates a vertical line in the center of the page?

  Here is an example of what I'm looking for.

  

  First go to view > rulers, then right-click on the rule, and the percent change units.

  (so the action registers per cent and will work on different size documents)

  Then drag a vertical guide at the Center, drag one to the top of the image and the other down.

  (the goal is so the online tool is aligned with the top and down and you know where is the center of the document)

  

  For action, you can use the online tool and just save lines from the top of the image down along the center guide.

  

  

• CC of 2015 rubber-band layers and vertical lines in the timeline

  Greetings,

  Like many others, I feel many troubling issues with AE and first in this CC 2015 was last updated. I have a lot of problems with friction audio, audio response slow keyboard, wacky playback with a loop and being insensitive to the entrance and these preview. All of you who are on the known issues page.

  Another question I had is when I make keyframe adjustments or time to layer (by clicking and dragging them forwards or backwards in time on the timeline) they will often leap after releasing the mouse button. I can't get this repeat with regularity, but it happens... every few minutes or sometimes several times in a row. Sometimes when the timeline panel displays a different portion of the timeline, as if I did scroll up with the mouse and then wheel jumps to what I was working on a second later.

  
  

  I also have a problem with vertical lines in the timeline on playback. In this case most of the time.

  

  Here are my system specs:

  First Pro CC 2015

  Win 7 64 bit (up to date)

  I7 970

  24 GB Ram

  NVIDIA 970GTX (driver)

  500 GB SSD

  Internal 2 TB

  2 x internal 4TB

  3 TB internal

  12 to RAID 5 via USB 3.0

  USB 2.0 and 3.0 readers

  Audio device FireWire (M-AUDIO FireWire1814)... even if I'm not using it for reading. It is connected.

  Images is the H.264 files, JPG Stills, solid and no third party traffic.

  These issues are scheduled to be fixed in the update for AE which is supposed to come out in less than a week.

• The top of page 2 appeared at the bottom of Page 1

  Top of page 2 is now appearing at the bottom of Page 1 and I can't seem to understand how to bring it to the appropriate page.  I searched on Google and he suggested starting point tool.  In order to better explain what is my problem... in Word (and the document has been created from a form; not a Word document) I would have used a page break.  Unable to find anything like that.

  Sorry for what a quesiton of novice.

  Yes even if they say that you can convert to a doessn can't word Document it keep the word line breaks and the line ends with a return.

  You must do some editting before you can reuse.

  Other applications (for Mac and can be the same for PC) who turns to the Office of the PDF document. I don ' know there if do it better:

  Nuance PDF Converter for Mac

  PDF2Office v6.0

  Solid PDF to Word

  Wondershare PDF Editor Pro

  They can do better.

  It would be actually better so have a backup to: text.

  This way when you open it in Word to automatically on formatting a Word Document if it was introduced, to a vacuum worrd Document.  You will always have to redo any design of forms.

• Flashing of the vertical lines in the tab bar?

  There are small vertical lines in the tab bar. They appear after the closing of the tabs. They are flashing, then change places when I place the cursor on any Firefox buttons or bars. And sometimes, they are flashing and the text cursor in the address bar of mirror.

  Disable all modules and themes does not affect them.

  I'll try to add a screenshot of the problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes