very slow computer load time
I get a message every time I start my computer the message I get is "cannot open AsIO.sys."
Hello
It's an ASUS driver, so you should contact their support and the forums.
ASUS support
http://support.ASUS.com/default.aspx?SLanguage=en-us
ASUS forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us
You can also contact your system manufacturer/manufacturer.
Google search - AsIO.sys
http://www.Google.com/search?hl=en&source=HP&q=AsIO.sys&btnG=Google+search&AQ=f&OQ=&AQI
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Group residential slow and other problems with it
Hello!I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.If I forgot something to write, or you need more information, do not hesitate to ask.I'd appreciate any help really.Hello
Manually check manufacturers sites WiFi because pilots offered through
Updates Windows will most often not be later (MS is far behind certifying)
drivers and many manufacturers do not quickly submit newer versions or not at all). See
Manual driver update of the methods below.The question could be WiFi in fact however try to device (hardware)
update the driver first.What antivirus/security is used? Some of those who will cause problems with the
Homegroup. Since it happens more often on a single computer that on there
a check.From this link:
Homegroup: frequently asked questions (also shows how delete and remove homegroup)
http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions"Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »
Share files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone==================
How to upgrade manually the drivers:
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods
below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
found)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
(Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
7 love the updated drivers.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet
HI Bob,
Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.
Good luck!
-
Very slow to load on a Windows Server 2012R2 PowerCLI
Hi all
PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests
Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)
PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}
Days: 0
Hours: 0
Minutes: 0
Seconds: 1
Milliseconds: 871
Ticks: 18717065
TotalDays: 2.16632696759259E - 05
TotalHours: 0.000519918472222222
TotalMinutes: 0.0311951083333333
TotalSeconds: 1.8717065
TotalMilliseconds: 1871.7065
Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL
PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}
Days: 0
Hours: 0
Minutes: 0
Seconds: 51
Milliseconds: 603
Ticks: 516030768
TotalDays: 0.000597257833333333
TotalHours: 0.014334188
TotalMinutes: 0.86005128
TotalSeconds: 51.6030768
TotalMilliseconds: 51603.0768
Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabledPS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}
Days: 0
Hours: 0
Minutes: 0
Seconds: 16
Milliseconds: 323
Ticks: 163238507
TotalDays: 0.000188933457175926
TotalHours: 0.00453440297222222
TotalMinutes: 0.272064178333333
TotalSeconds: 16.3238507
TotalMilliseconds: 16323.8507
As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html
But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)
Any help is appreciated.
Hi LucD,
I've found a workaround:
When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)
Now is the time of execution:
Windows PowerShell
Copyright (C) 2013 Microsoft Corporation. All rights reserved.
PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}
Days: 0
Hours: 0
Minutes: 0
Seconds: 2
Milliseconds: 774
Ticks: 27745259
TotalDays: 3.2112568287037E - 05
TotalHours: 0.000770701638888889
TotalMinutes: 0.0462420983333333
TotalSeconds: 2.7745259
TotalMilliseconds: 2774.5259
Not bad! Execution time lowered 16 sec at 2.8 sec
-
DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis
As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.
I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.
The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.
Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.
I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.
The only problem now is that all channels are renamed with the Appendix "sample".
I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!
Help please, before I resort to re - install 2010!
Karoline
Hello Albert,.
It is a relatively easy solution:
In the BROWSER, go to the menu "settings":
In the dialog box that is displayed, change the setting of data "always load in bulk.
Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.
Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!
Otmar
-
12 Firefox is very slow to load pages and if two tabs are open, it lag.
12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.
-
PS CC 2014 very slow to load and function after update 2014.2
I've updated my Photoshop CC 2014 64-bit today. It worked perfectly until the update. Since the update, PSCC 2014 has been very, very slow to load and slow in use. I uninstalled used PS PS cleaner and reinstalled via the CC Office. The problem of the speed remains. Interestingly, the 3D is the functions Menu which seems to take longer to load. In other words, see the program load, possibly, but 3D 6 or 7 seconds later. I don't know if it's important. The installation worked fine the update.
Grateful for any ideas on what could be the problem and what I can do about it.
My system is a 3770 K, with 32 GB of ram, x 4 SSD that dedicated to the OS, programs and other data and an Asus GTX660 (2 GB) graphics card. I use the latest version of the driver from the Nvidia website. OS is Windows 7 64 bit.
I get no error message - slow all just great.
Thank you.
Right. I've been tracking, with the help of the Forum of Kaspersky, KIS 15.0.1.415 file. It seems the problem of lag with CC2014.2.
You can find it here:
-
Very slow computer from El Capitan 10.11.3
I hope that someone can help you. My computer is very slow and unstable since the El Capitan 10.11.3 patch. I am on a MacBook Pro 15 "-end 2011. The computer is particularly slow in Safari, but was slower than normal as well. I backed up my files in Time Machine to an external drive before any troubleshooting, so I'm really happy about it. The person had me clear everything and go into recovery mode and reinstall the OS. After that I had problems with closing down and restart so I reinstalled again and just have not stopped since then. I don't him have NOT YET migrated all my files back and will not until I know that the system is stable. My laptop is functional but still just very slow. Can someone please help? I'm desperate! Thank you so much in advance!
I ran a report EtreCheck about an hour ago and got this:
EtreCheck version: 2.7.8 (238)
Report generated 2016-01-26 15:28:29
Download EtreCheck from http://etrecheck.com
Time 03:10
Performance: good
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
Slow computer - recent issue since El Capitan 10.11.3
MacBook Pro (15 inch, late 2011)
[Data sheet] - [User Guide] - [Warranty & Service]
MacBook Pro - model: MacBookPro8, 2
1 2.5 GHz Intel Core i7 CPU: 4 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1333 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1333 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 309 - SN = D86139302X5DGDLAH
Intel HD Graphics 3000
Color LCD 1680 x 1050
AMD Radeon HD 6770M - VRAM: 1024 MB
OS X El Capitan 10.11.3 (15 d 21) - time since started: about 2 days
Hitachi HTS727575A9E362 disk0: (750,16 GB) (rotation)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB Macintosh HD (disk 1) /: 748,93 (Go 728,47 free)
Encrypted AES - XTS unlocked failed
Storage of carrots: disk0s2 749.30 GB Online
HL-DT-ST DVD - RW GS31N)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Computer, Inc. Apple IR receiver.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
com.Apple.CoreServices.appleid.authentication.plist [killed]
com.Apple.printuitool.agent.plist [killed]
com.Apple.RCD.plist [killed]
3 the process killed the lack of RAM
com.Apple.corestorage.corestoragehelperd.plist [killed]
com.Apple.coresymbolicationd.plist [killed]
com.Apple.findmymac.plist [killed]
com.Apple.icloud.findmydeviced.plist [killed]
com.Apple.ifdreader.plist [killed]
com.Apple.nsurlsessiond.plist [killed]
[killed] com.apple.periodic - daily.plist
com.Apple.printtool.daemon.plist [killed]
com.Apple.softwareupdate_download_service.plist [killed]
com.Apple.system_installd.plist [killed]
com.Apple.wdhelper.plist [killed]
com.Apple.XPC.SMD.plist [killed]
12 killed process lack of RAM
[loading] com.oracle.java.Java - Updater.plist [Support]
[loading] com.adobe.fpsaud.plist [Support]
[loading] com.oracle.java.Helper - Tool.plist [Support]
Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Dropbox application (/ Applications/Dropbox.app)
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000008.dropbox
[ongoing] com.Apple.XPC.launchd.oneshot.0x1000001d.EtreCheck
FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 8 update 71 build 15 check the version
Default browser: Version: 601 - SDK 10.11
Flash Player [Support]
Java [Support]
Time Machine not configured!
6% kernel_task
6% WindowServer
0% askpermissiond
Top of page process of memory: ⓘ
Kernel_task 520 MB
Com.apple.WebKit.WebContent (3) 139 MB
Overview of 115 MB
Safari of 82 MB
70 MB suggestd
240 MB of free RAM
3.76 GB used RAM (1.01 GB being cached)
40 MB used Swap
January 23, 2016, 22:08:07 self-test - spent
You have enough RAM, add or reduce the number of simultaneously running programs.
Try this:
Repair the hard drive and permissions - El Capitan
HD recovery start:
Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.
Repair
When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left. Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.
Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.
-
my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar
HY sorry my bad English...
I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end
Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode
measures have I made:
-change the hard drive
-change the disk sata hard
-battery change
-change the trackpad and trackpad cable
-change the OS 10.6, 10.7 10.10, 10.11
-change model point via
and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time
is there a solution that is more useful? very confused i
0o0o
If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/
-
Very slow Firefox loading pages
So many pages are really slow loading as minute, as Courier hot.EE youtube and many more. It started to happen when I updated to 20.0. Looked up a few suggestions and found that everything: config network.http.keep - alive using fake. And so I did and it worked, but the next time I opened firefox again, that it was slow to load again, but persistent is always false, all non disabled necessary plugins and extensions and I don't seem to find a solution. Been a user of firefox for a long time and do not want to change my browser.
The new profile seems to work very well - don't know for how long, but we'll see how that goes.
-
Toshiba 320 GB external HARD drive make my very slow computer
Hello.
I bought this product a few weeks ago now, and every time I use it, it makes my computer go tp so slow to the point where I can't actually do something on this subject, due to the fact that everything becomes inadmissible. Also, the rate at which I transfer files to it is also very slow. Any ideas why and what I can do to speed things up a bit?
Thank you.
Hello
You suggested that the laptop becomes slowly during the use of the external HARD drive.
I guess that transfer you a data from the HARD drive internal to the external USB HDD.
I think that it s not very rare, that the laptop runs slowly during the transmission of the data.
It depands on the program that runs in the context of the operating system.I put t know which interface you use USB2 or USB only, but data transfer depends on the interface.
-
Logic 10.2.1 very slow to load aus with yosemite
I use OS X 10.10.5
I upgraded to logic 10. 2.1 last night
very slow to plugins to the boy up to a point where it is, in my view, unusable in the workplace
to be completely sure that I loaded Logic 10.2
loading time at the was satisfactory
Too bad the new update is very nice
to support the upgrade at this time
No problems or slowdowns with loading THE slot 10.2.1 and 10.10.5 on all three of my workbed of platforms here... so I suspect that you have either a file/permissions related question or a plugin wrapper like... installed 32lives plugin that is causing the slowdown
Check your logs (OS X Finder > Applications > utilities > Console) to help identify the cause...
-
very slow computer where I can't access rearch engines or anything else outside the e-mail
my computer has recedntly becomes very slow and I can't use it except for e-mail. Every search I do says site is unavailable. The size of the police has started to adapt to a format that I can't read it is so big and I can't change it back down. I also have a problem with access to a wireless printer to my wireless computer that is almost brand new. It is a Lenova all-in-one and has been a problem since I got it. any advice would be gratefull received. Thank you
Sunday, December 30, 2012 19:20:52 + 0000, Sherry21 wrote:
Hi Ken thanks for the tips, I have removed McAfee last night and put on the free version of Avira, with good effect so far, also reset the time back one week only problem now is wireless configuration between the printer and the computer via the cloud. Going to give it another go tonight as I
hold my phone to connect to the printer. Keep will keep you posted and thanks for your help, Eileen ClarkYou are welcome. Happy to help you.
Ken Blake
-
From the moment where that I turn on the switch for the time that I can use internet explore my computer takes a minimum of 15 minutes. is there a way to fix this because it is very annoying. Either way, I'm using windows XP. Thank you
Al
Hi Alain,
Thanks for posting your question in the Microsoft Community.
The question above, computer runs very slow. I'll be happy to help you on this question.
You did changes to the computer before the show?
This problem can occur because some third-party programs, unwanted programs running on the computer.
Method 1: I suggest you to run the fixit from the following link:
Difficulty of Windows system performance slow computer problems
http://support.Microsoft.com/mats/slow_windows_performance/enMethod 2: I suggest you try the steps from the following link:
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=kmc757u4ZloNote: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. When you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.
Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Windows 7 Media Center very slow to load the program guide
I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB of Ram. I use a dual DVB - T2 tuner card black gold. The PC works as expected with all other tasks (Netflix, iPlayer, MyMovies for Media Center), but when I first load the program guide, it takes more than 30 seconds before the system displays the guide and becomes sensitive (later loading times are a little faster, unless the PC is in "standby", in which case I face the same deadline when you enter the program guide). There is no other applications running on the system (the PC directly in the MC boots). Once the guide is loaded, it works at normal speed (sometimes channel tuning may take longer than expected, but usually he settles in a few seconds).
I'm running Windows 7 Ultimate. Recently, I reinstalled the operating system and for a few days the PC seems to be running OK, but he soon return to be incredibly slow, loading guide. (I also started to notice that it takes longer time to start playback of recorded assets).
Any help or pointers would be appreciated.
Thank you very much
R
(Moved to programs)
Hi Richard,
Welcome to Microsoft Community forum. Let me help you with your concern.
The information in the Guide is periodically downloaded from the Internet from your Guide list service provider. You are notified that "no data is available" in the Guide in the case either of the following things:
- Windows Media Center cannot connect to the Internet and download the new Guide information for a long period of time, and the Guide information that was previously downloaded is corrupt or has expired. For more information, see solving problems with an Internet connection. (Applicable for Windows 7 alos article)
- Guide information is not available for your location from the lists Guide service provider. For more information, see download updated Guide listings. (Applicable for Windows 7 alos article)
You can see this Microsoft article and check if it helps:
http://Windows.Microsoft.com/is-is/Windows/use-guide-Media-Center#1TC=Windows-7
If the Guide appears blank and manually download the latest announcements of Guide doesn't seem to work, you may need to set up your TV signal again. To learn how, see set up a signal TV in Windows Media Center.
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
Maybe you are looking for
-
Notes App crashing on the iphone 6 after upgrade to iOS10
After update to iOS10, the notes app was crashing. I noticed the application crashes as soon as it tries to establish the connection to the cloud. The app will work normal if I open the Notes app in airplane mode Do you have anyone experience this pr
-
flight of the zeros by programming
Is it possible to change the property "Hide trailing zeroes" programmatically. I realize that it can be easily changed statically in the development environment, but I would like to change a programming based on a user selection. Thank you
-
I login in safe mode and icons appear. I also checked device Manager with the warning icon in the network adapters. Teredo tunneling adapter 10 error. I get internet connection in safe mode but not in normal mode. I have windows 7.
-
Windows 7 does not recognize camera
original title: dsc - p92 camera 3 x optical zoom my old camera sony dsc - p92 5.0 mega pixels is not recognized by windows 7. Can you help me?
-
Illustrator Adobe: I can't split the layer after expand and separate
HelloIM learning adobe illustrator and im trying this tutorial and I reach this stipFirst I develop a vectorized photothin I disassociate it and then is supposed to penetrate the main layer of underlayment that contain paths but there's a layer name