Very slow computer
From the moment where that I turn on the switch for the time that I can use internet explore my computer takes a minimum of 15 minutes. is there a way to fix this because it is very annoying. Either way, I'm using windows XP. Thank you
Al
Hi Alain,
Thanks for posting your question in the Microsoft Community.
The question above, computer runs very slow. I'll be happy to help you on this question.
You did changes to the computer before the show?
This problem can occur because some third-party programs, unwanted programs running on the computer.
Method 1: I suggest you to run the fixit from the following link:
Difficulty of Windows system performance slow computer problems
http://support.Microsoft.com/mats/slow_windows_performance/en
Method 2: I suggest you try the steps from the following link:
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=kmc757u4Zlo
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. When you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.
Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
Tags: Windows
Similar Questions
-
I have a problem with my email and Facebook, I can't in the games that I played, computer is very very slow.
Hi szagorski,
Have you looked at the Knowledge Base article, the problems with some Facebook games, chat and more? There is much good in this troubleshooting information. Please don't forget to try all the suggested steps. Each one is precious and can be the answer to your question.
Hope this helps!
-
Toshiba 320 GB external HARD drive make my very slow computer
Hello.
I bought this product a few weeks ago now, and every time I use it, it makes my computer go tp so slow to the point where I can't actually do something on this subject, due to the fact that everything becomes inadmissible. Also, the rate at which I transfer files to it is also very slow. Any ideas why and what I can do to speed things up a bit?
Thank you.
Hello
You suggested that the laptop becomes slowly during the use of the external HARD drive.
I guess that transfer you a data from the HARD drive internal to the external USB HDD.
I think that it s not very rare, that the laptop runs slowly during the transmission of the data.
It depands on the program that runs in the context of the operating system.I put t know which interface you use USB2 or USB only, but data transfer depends on the interface.
-
Very slow computer from El Capitan 10.11.3
I hope that someone can help you. My computer is very slow and unstable since the El Capitan 10.11.3 patch. I am on a MacBook Pro 15 "-end 2011. The computer is particularly slow in Safari, but was slower than normal as well. I backed up my files in Time Machine to an external drive before any troubleshooting, so I'm really happy about it. The person had me clear everything and go into recovery mode and reinstall the OS. After that I had problems with closing down and restart so I reinstalled again and just have not stopped since then. I don't him have NOT YET migrated all my files back and will not until I know that the system is stable. My laptop is functional but still just very slow. Can someone please help? I'm desperate! Thank you so much in advance!
I ran a report EtreCheck about an hour ago and got this:
EtreCheck version: 2.7.8 (238)
Report generated 2016-01-26 15:28:29
Download EtreCheck from http://etrecheck.com
Time 03:10
Performance: good
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
Slow computer - recent issue since El Capitan 10.11.3
MacBook Pro (15 inch, late 2011)
[Data sheet] - [User Guide] - [Warranty & Service]
MacBook Pro - model: MacBookPro8, 2
1 2.5 GHz Intel Core i7 CPU: 4 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1333 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1333 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 309 - SN = D86139302X5DGDLAH
Intel HD Graphics 3000
Color LCD 1680 x 1050
AMD Radeon HD 6770M - VRAM: 1024 MB
OS X El Capitan 10.11.3 (15 d 21) - time since started: about 2 days
Hitachi HTS727575A9E362 disk0: (750,16 GB) (rotation)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB Macintosh HD (disk 1) /: 748,93 (Go 728,47 free)
Encrypted AES - XTS unlocked failed
Storage of carrots: disk0s2 749.30 GB Online
HL-DT-ST DVD - RW GS31N)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Computer, Inc. Apple IR receiver.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
com.Apple.CoreServices.appleid.authentication.plist [killed]
com.Apple.printuitool.agent.plist [killed]
com.Apple.RCD.plist [killed]
3 the process killed the lack of RAM
com.Apple.corestorage.corestoragehelperd.plist [killed]
com.Apple.coresymbolicationd.plist [killed]
com.Apple.findmymac.plist [killed]
com.Apple.icloud.findmydeviced.plist [killed]
com.Apple.ifdreader.plist [killed]
com.Apple.nsurlsessiond.plist [killed]
[killed] com.apple.periodic - daily.plist
com.Apple.printtool.daemon.plist [killed]
com.Apple.softwareupdate_download_service.plist [killed]
com.Apple.system_installd.plist [killed]
com.Apple.wdhelper.plist [killed]
com.Apple.XPC.SMD.plist [killed]
12 killed process lack of RAM
[loading] com.oracle.java.Java - Updater.plist [Support]
[loading] com.adobe.fpsaud.plist [Support]
[loading] com.oracle.java.Helper - Tool.plist [Support]
Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Dropbox application (/ Applications/Dropbox.app)
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000008.dropbox
[ongoing] com.Apple.XPC.launchd.oneshot.0x1000001d.EtreCheck
FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 8 update 71 build 15 check the version
Default browser: Version: 601 - SDK 10.11
Flash Player [Support]
Java [Support]
Time Machine not configured!
6% kernel_task
6% WindowServer
0% askpermissiond
Top of page process of memory: ⓘ
Kernel_task 520 MB
Com.apple.WebKit.WebContent (3) 139 MB
Overview of 115 MB
Safari of 82 MB
70 MB suggestd
240 MB of free RAM
3.76 GB used RAM (1.01 GB being cached)
40 MB used Swap
January 23, 2016, 22:08:07 self-test - spent
You have enough RAM, add or reduce the number of simultaneously running programs.
Try this:
Repair the hard drive and permissions - El Capitan
HD recovery start:
Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.
Repair
When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left. Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.
Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.
-
very slow computer where I can't access rearch engines or anything else outside the e-mail
my computer has recedntly becomes very slow and I can't use it except for e-mail. Every search I do says site is unavailable. The size of the police has started to adapt to a format that I can't read it is so big and I can't change it back down. I also have a problem with access to a wireless printer to my wireless computer that is almost brand new. It is a Lenova all-in-one and has been a problem since I got it. any advice would be gratefull received. Thank you
Sunday, December 30, 2012 19:20:52 + 0000, Sherry21 wrote:
Hi Ken thanks for the tips, I have removed McAfee last night and put on the free version of Avira, with good effect so far, also reset the time back one week only problem now is wireless configuration between the printer and the computer via the cloud. Going to give it another go tonight as I
hold my phone to connect to the printer. Keep will keep you posted and thanks for your help, Eileen ClarkYou are welcome. Happy to help you.
Ken Blake
-
My computer is very slow and I tried to uninstall Spyware doctor but he won't be able to uninstall I just returned as error and not compatible with windows 7 please help me
Suggestions: follow the steps...
1. ensure that Spyware doctor™ does not work.
Right click on the taskbar > Task Manager > processes tab > know if Spyware doctor™ is still running > if so, right click > end process > exit the Task Manager.2. temporarily disable UAC.
Start > Control Panel > user accounts > change user account control settings > move the cursor down.3. go to the Safe Mode > uninstall Spyware Doctor
4. go in computer > open Program Files (x 86) > search for Spyware Doctor file > delete the file.
5 re - enable UAC.
-
Original title: "after soafter a few days my computer os work very slow which is the resion behind thisme days my computer os work very slow which is the resion behind all this."
After a few days my computer os work very slow which is the resion behind it allHello
1. don't you make changes on the computer before the show?
2. you receive an error message?
3. what software antivirus installed on the computer?
Method 1:
You can run the fix that it provided on the link and the Coachman.
Difficulty of Windows system performance slow computer problems
http://support.Microsoft.com/mats/slow_windows_performance/
Method 2:
You can also try the steps outlined in the links to improve the performance of the computer.
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Ways to improve your computer's performance
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
See also the links in the help:
How to make a computer faster: 6 ways to speed up your PC
http://www.Microsoft.com/atwork/maintenance/speed.aspx
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx -
Very slow computer after the latest updates
Hello
I've updated one of my PCs running Vista x 64 updates of security two days ago.
Now that the systems takes more than 15 minutes just to start at the opening screen of session and as much time again to get on the desktop.
The mouse cursor is always fast as usual, but everything else including the caret blink time is super slow.This is a really clean system which is used strictly for dedicated 3D work, so he has nothing but Max, EU3 and WinZip on it. It is not used for Internet access.
No hardware or software changes attempted in several months, other than updates Windows System.
Intel C2Q Q6600, 8 GB 1066 RAM, NVidia 8800GTS 512, WD 500 GB HD, ASUS P5K mobo.I was wondering if anyone else has experienced this problem with updates, especially as it's really painful trying to solve the problems since that it literally takes hours to try whatever it locate either changes the problem. I'll do a wipe and reinstall if I have to spend a lot more time with reboots, it will be faster.
I am answering my own question here... :-)
Maybe it will help someone else and save a few hours of work waiting for the slow start to fix things.For those who are interested: the OS is Vista Home Premium x 64. Material has been listed above. It is a high-end with hardware system high range, coolers, cases, power supply, etc.
This is not a system of job full time, it is used only for specific work I usually do a few hours on one or two days a week.I timed it really starts the Welcome screen and it is more than 45 minutes. lol :-D
I pulled off the side of the case and noticed that the HDD was just chewing on something.
Start in safe mode was also just as painfully slow as standard start (argh).Regarding the updates of Windows, I have this system set to inform only, so I only install updates at the end of all the days that I work on the computer. Where my assumption that it's a matter of update that caused the problem, since nothing ever changes, on this subject - files are still saved out to a network server.
However, once I could get on the computer, I noticed that I had also installed Windows Live Mail top the same day I did the updates of Windows (two days ago). WLM has been installed just to get a screenshot of it for my blog, it was never really used for Internet e-mail, it should be uninstalled some time on one of the next system bootups.
Then... Installation apparently a combination of WLM or the latest Windows updates has completely borked something on the computer starts.
I got my DVD of Vista, it started, ran the Startup Repair. Now, the system works very well. WLM has been uninstalled in the case where it has been part or all of the guilty.
As with a PC, it could be something to do with the specific hardware and software configuration, the order of WLM and updates installed, specific updates installed, etc..I would recommend that anyone with a similar configuration be sure to install WLM or updates in the estate where they fall in the same question.
Just don't panic if you have problems, try a DVD Vista Startup Repair. :-) -
Windows 7 Build 7601 copy is not authentic - very slow computer
-Very well, so I am posting this from my smartphone because my computer is slower than a brick right now. As the title says, my computer is saying that my copy of windows is not genuine. Who is Mario total I had zero proboems since the acquisition in 2010 directly from HP before going to College. A few days ago it started running very slowly until it would not all browsers or even folders for more than 15 minutes. This problem seems to resolve itself and I blame it on the recent updates. Then my projected computer blue and when I started it back up her do the same thing now with error not authentic and now no browser will open, period. So no dice on the execution of the wgadiag.exe on the windows site. I tried safe mode, but he found himself hooked on one of the .sys files. I looked similar questions and have reduced to the store of confidence Tamper being obsolete, malware or hard drive failure. I am running malwarebytes to determine whether malicious software exists. In the meantime, I was wondering if there is any other possible suggestions. If Mo can't find anything, I'll try a safe boot and see if it works this time. If it hangs on the same file is there a way to fix this? I appreciate any help in this matter. If I can get to execute mgadiag, I'll post the results although it seems highly unlikely at the moment. Once again, thanks in advance!
Ignore me, I'm stupid. I forgot that HP has a built in hard drive test in BIOS, running, and of course my hard drive is out. It doesn't have the short DST so I'm pretty much GROUND on this one. Well that's life.
-
G6-2235tx: very slow computer, start / stop and everything inbetween.
Hello
I know aren't necessarily questions of hp, but I google all out and if anyone could spare a few minutes.
I vain changed administrator accounts and I lost my old settings. now im in the changing environment of the admin accounts, but I am unable to proceed at the present time, and it seems vain changing settings in between her time.
First, when my computer 'window broadcast web event' happens as still running. (I don't know if it's the only thing that slow down my computer.)
I recently had to rebuild my computer (settings?) after the return of win10 and think that it was that I corrected then. This time when Googling ive met messages that say just ccc turn off completely (the last time I just did the compatibility thing) do not play games and it seems according to google, that what its purpose to. (ive opened ccc long watched and never used) is it safe to, or a value to disable completely? (I already did the layout compatibility and which seems to have already improved my speed/blocking problems.)
Ive got other queries, but I think I could divide their
If its wrong to annoy this forum and other problems of companies, please let me know and I'll return to Googling.
Thank you
Hi @oopsys,
Thank you for visiting the HP Forums!
I will do my best to help you. I read your thread on your HP Pavilion g6-2235tx laptop and have slow speeds. Thank you for all the information on what is happening and what you've done so far. Something is slowing down the laptop.
Have you installed some antivirus or firewall? If you disable what are your speeds better?
Here is a document on improving your system.
If these things do not help, I would consider a refresh of Windows 8. Do not forget to save music films and documents in the case where.
The reset will install the original driver and sometimes to solve the problem of the slow speeds or slow to develop.
Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek. In addition, by clicking on the thumbs below is a great way to say thank you!
Thank you.
-
After starting my computer to Windows 7 Enterprise, I noticed that it runs very slowly. for example, the scrolling of a window of firefox crashes every 10 seconds or more. The gel lasts between 2 and 10 seconds with the little blue wheel, spinning, (not answer) in the toolbar.
I pulled the top of resource monitor and to see that 4 PID - C:\System Volume Information\ {guid} {guid} is running non-stop with about 720ko read by writing dry and 6 MB per second Disk 0 length of the queue is pegged at 5. from time to time (once every 10 to 15 minutes), the queue goes to 0 and the computer starts acting normally (i.e. fast) again. But once the length of the queue points to 5, the problems continue.
I am running in raid 5.
I noticed that vssvc.exe is running (PID 4144) with a reference to c:\System Volume Information and the same GUID as PID 4 - system and kernel.
Any idea what I can do to get back on my computer? At this point, it is absolutely unusable.
Thank you
Marshall
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
CHKDSK freezes, very slow computer
My computer runs very slowly from the windows of the last update. Many messages "not responding". Explorer, and pretty much any program I try to open freezes. The suggested problem solver running CHKDSK to search for disk errors. He gets in what concerns the step 4 of 5 and 16766 330800 file it seems to freeze. The first time that I left it for more than 2 hours then turn it off. The next time I let him run and he just seemed to give place and loaded Windows. Any ideas? How long should I wait?
My computer runs very slowly from the windows of the last update. Many messages "not responding". Explorer, and pretty much any program I try to open freezes. The suggested problem solver running CHKDSK to search for disk errors. He gets in what concerns the step 4 of 5 and 16766 330800 file it seems to freeze. The first time that I left it for more than 2 hours then turn it off. The next time I let him run and he just seemed to give place and loaded Windows. Any ideas? How long should I wait?
Looks like a bad drive.
I backup your stuff and then try a system restore to see if updates uninstall helps you at all.
-
I get a message every time I start my computer the message I get is "cannot open AsIO.sys."
Hello
It's an ASUS driver, so you should contact their support and the forums.
ASUS support
http://support.ASUS.com/default.aspx?SLanguage=en-usASUS forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-usYou can also contact your system manufacturer/manufacturer.
Google search - AsIO.sys
http://www.Google.com/search?hl=en&source=HP&q=AsIO.sys&btnG=Google+search&AQ=f&OQ=&AQII hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Very slow computer and does not program
I tried to help a friend to solve the above problem.
In the past, all the problems I've had have been sold on this forum so here I am again.
I run an antivirus malware nothing, the auto run from a previous link looks like there is no problem.
The operating system is windows 7 32 bit.
Everything on this machine is really slow and programs have always failed.
Thanks in advance for the advice and assistance
I had the same problem, I have reinstalled my 7 x 64 and so far, my PC works well.
-
I want to move small program or program files of the hard C on the hard disc drive
Friday, December 21, 2012 18:43:37 + 0000, sajansoman wrote:
I want to move small program or program files of the hard C on the hard disc drive
Although there are utilities that are supposed to do, in my
experience, none of them work perfectly. So, I recommend that you do
do not try to move them, but rather to uninstall, then reinstall
stick on drive D: from their original.
Ken Blake, Microsoft MVP
Maybe you are looking for
-
SanDisk 4 GB Ultra II Compactflash (15 MB/sec) capacity memory card problem
I have Canon EOS 350 d (Rebel XT) and Sandisk 4 GB Ultra II Compactflash (15 MB/s) memory card and I was using this card with my camera almost 3 years. I have no problem and it has worked great so far. This is my problem: I am inserting my Sandisk 4
-
PowerEdge C1100 dead in the water...
Hello PowerEdge general HW Forum: My C1100 is in a solid error condition. When is powered by plugging in, turns on, but the system is not responding. The power switch on the front panel is not working. The malfunction orange/orange light is on and th
-
BlackBerry smartphones I love my torch, but I have a real problem...
-
Windows 7 Enterprise does not detect DVD
Hi, I recently installed a trial version of windows 7 Enterprise on my Macbook with the help of VMware Fusion. When I insert a DVD into my Macbook the DVD or its contents appears in Windows 7 'Computer' where the disks. I had already installed Windo
-
I'm trying to update Windows Professional and the following error message keeps appearing in the "application cannot find one of its files required, possible because he was unable to create it in the folder. Please make sure that the folder in which