Very slow to load the page Office getting black screen after the homepage at startup?

Similar Questions

• Windows 7 Media Center very slow to load the program guide

  I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB of Ram. I use a dual DVB - T2 tuner card black gold. The PC works as expected with all other tasks (Netflix, iPlayer, MyMovies for Media Center), but when I first load the program guide, it takes more than 30 seconds before the system displays the guide and becomes sensitive (later loading times are a little faster, unless the PC is in "standby", in which case I face the same deadline when you enter the program guide). There is no other applications running on the system (the PC directly in the MC boots). Once the guide is loaded, it works at normal speed (sometimes channel tuning may take longer than expected, but usually he settles in a few seconds).

  I'm running Windows 7 Ultimate. Recently, I reinstalled the operating system and for a few days the PC seems to be running OK, but he soon return to be incredibly slow, loading guide. (I also started to notice that it takes longer time to start playback of recorded assets).

  Any help or pointers would be appreciated.

  Thank you very much

  R

  (Moved to programs)

  Hi Richard,

  Welcome to Microsoft Community forum.  Let me help you with your concern.

  The information in the Guide is periodically downloaded from the Internet from your Guide list service provider. You are notified that "no data is available" in the Guide in the case either of the following things:

  • Windows Media Center cannot connect to the Internet and download the new Guide information for a long period of time, and the Guide information that was previously downloaded is corrupt or has expired. For more information, see solving problems with an Internet connection. (Applicable for Windows 7 alos article)
  • Guide information is not available for your location from the lists Guide service provider. For more information, see download updated Guide listings. (Applicable for Windows 7 alos article)

  You can see this Microsoft article and check if it helps:

  http://Windows.Microsoft.com/is-is/Windows/use-guide-Media-Center#1TC=Windows-7

  If the Guide appears blank and manually download the latest announcements of Guide doesn't seem to work, you may need to set up your TV signal again. To learn how, see set up a signal TV in Windows Media Center.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• CF 11 very slow to load web pages - up to 10 seconds

  Running CF11 Windows 2012 r2 Datacenter IIS 8 4 GB MEMORY 4 hearts none reported attempted by default CF11 - waiting for [email protected] send me the hf1100 - 3776060.123 or hf1100 - 3776060.jar fix keep stopping services

  
  

  What can I do? My CF 8 is running much faster than this
  

  
  

  Thank you!
  

  Hello

  This blog CF11 entry can help:

  http://blogs.ColdFusion.com/post.cfm/ColdFusion-11-IIS-connector-tuning

  I guess that CF8 is on 32-bit and CF11 on 64-bit. So you might do well to adjust the initial and maximum memory more PermGen. These parameters in CF11admin > server settings > Java and JVM

  Minimum JVM heap size (in MB) 256
  Maximum JVM heap size (in MB) 512

  JVM arguments
  -XX: MaxPermSize = 192 m

  EG 1024 3072 and 512 m, respectively.

  Well it's not exactly CF Java more of a try tuning and see. You can still perform some CF Java and tomcat CF surveillance to better understand what are the values to be applied.

  HTH, Carl.

• I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

  My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

  HI Bob,

  Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

  Good luck!

• DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis

  As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.

  I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.

  The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.

  Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.

  I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.

  The only problem now is that all channels are renamed with the Appendix "sample".

  I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!

  Help please, before I resort to re - install 2010!

  Karoline

  Hello Albert,.

  It is a relatively easy solution:

  In the BROWSER, go to the menu "settings":

  

  In the dialog box that is displayed, change the setting of data "always load in bulk.

  

  Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.

  Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!

  Otmar

• G62 b90 - ev: black screen after Windows loading

  Hello everyone, as you can see by the title I get black screen after loading of Windows at the same time as everything else works (hard drive of fans lights and sounds). I've tried several things, I read on troubleshooting thread, memory, diagnosis, diagnosis of hard drive, delete and change put the Rams, disconnect the battery and ac and keep the power button for 30secs hurry the ac without the battery but nothing. I also tried to use a monitor with hdmi cable but I get a blue screen when I try with the monitor. Also what happens during a format so I can't even through safe mode. IM really waiting for your answers and in the hope of a solution. Thanks in advance!

  Just because you use the key F11 to restore to factory does not mean that the recovery partition itself is not altered.

  Suggest you try instead the recovery discs or take it to the shop for advanced diagnostics.

• Black screen after the failure of the connection - win 10 win7 installation

  Hello

  SYSTEM ERROR
  Cause
  I tried to install win10 on a PC running win7. Installation stalled at 99% and I restarted.
  The problem
  Now he still run win7, but once connected, the screen is completely black except for cursor. Features such as the job-work list as it should and in safe mode, the screen is not black after login.

  PC INFORMATION
  The video card
  My video card is "Mobile Intel (R) 4 Series Express Chipset Family" (driver version: 8.15.10.2202) Driver date: 25/08/2010) and windows tells me that the video card (graphics - in my language) is updated to the latest version.
  The model
  ASUS Pro79I Series. With Windows 7 64 bit

  Mathias, cordially

  Denmark

  Hi Mathias,.

  According to the description of the issue you do not get black screen after login in safe mode. For example, there might be a chance that the display driver is either corrupted or need a update. Please, try the steps to uninstall graphics card in Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the graphics card from the Web site of the manufacturer (ASUS)

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 12 Firefox is very slow to load pages and if two tabs are open, it lag.

  12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.

  
  

• PS CC 2014 very slow to load and function after update 2014.2

  I've updated my Photoshop CC 2014 64-bit today.  It worked perfectly until the update.  Since the update, PSCC 2014 has been very, very slow to load and slow in use.  I uninstalled used PS PS cleaner and reinstalled via the CC Office.  The problem of the speed remains.  Interestingly, the 3D is the functions Menu which seems to take longer to load.  In other words, see the program load, possibly, but 3D 6 or 7 seconds later.  I don't know if it's important.  The installation worked fine the update.

  Grateful for any ideas on what could be the problem and what I can do about it.

  My system is a 3770 K, with 32 GB of ram, x 4 SSD that dedicated to the OS, programs and other data and an Asus GTX660 (2 GB) graphics card.  I use the latest version of the driver from the Nvidia website.  OS is Windows 7 64 bit.

  I get no error message - slow all just great.

  Thank you.

  Right.  I've been tracking, with the help of the Forum of Kaspersky, KIS 15.0.1.415 file.   It seems the problem of lag with CC2014.2.

  You can find it here:

  http://USA.Kaspersky.com/downloads/software-upgrades/

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  No doubt.  If in doubt, download qualified help to solve the problem. It can be easily fixed, or not.  We cannot tell from here.

• I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  you have 2 options

  (1) bring it to a Sony repair center

  http://www.sonymobile.com/global-en/support/contact-us/

  or

  (2) use flashtool for downgrade

  Don't forget to mark the correct answers & useful answers

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.