Hebrew language works is not under Vista.
Original title: deleted language of vista
I have windows vista on a computer dell laptop. I had an additional language on my computer (Hebrew) all of a sudden the Hebrew did not work.
Hi Hadas,
Follow these steps and check if the problem persists.
Step 1:
I recommend you follow the steps in this link that talks about a similar problem.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-change-to-Hebrew-language-keyboard-and/108c5c1f-ad38-448D-95FC-3220d02a4139
Step 2:
Test the issue in a clean boot State.
Note: Follow step 7 to your computer as usual.
Tags: Windows
Similar Questions
-
Gamepad not working do not under Vista
My Windows Vista loaded and runs MS Combat Flight Simulator V1 OK using the keyboard, in 'settings' program, he recognizes the joystick for calibration but joystick doesn't work just not in the game itself. I tried this fix below - but no luck. Any other ideas please?
If you upgrade to Windows Vista, one of the things that you may find is that your older programs works under Vista. Many software publishers are working to release Vista compatible versions, but in the meantime, you can try running in Compatibility Mode applications.To do:
1. open Windows Explorer.
2. Locate the executable file of the application.
3. right click on the executable, and then click the properties option.
4. Select the Compatibility tab.
5. Select run this program in Compatibility Mode option.
6. in the drop-down list, choose the operating system that you ran before upgrading to Vista.
7. If necessary, select run the program as administrator.
8. click on OK.Hello
What is the brand and model of the gamepad?I suggest the following steps and check for the device.
a. click the Start button.
b. click Control Panel, open game controllers.
c. click on your game controller, and then click Properties.
d. on the Test tab, test the game controller to verify functionality.If this does not help, you can follow the steps in this article mentioned below:
http://support.Microsoft.com/kb/831361
(Valid also for all Microsoft games) -
Internet wireless on the laptop works do not under Vista
Hi guys. My laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the internet wireless yesterday after I restarted my laptop. I know that the modem is not the problem because my brother's laptop can connect to the net to wireless. Thank you in advance.
Hello
Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
system and your transfer on removable media such as CD, DVD or a USB key.Control Panel - device - network - WiFi note the brand manager and full
model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »Then on the tab driver, click Update driver (this can do nothing as MS is far behind
drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
update the driver stack.Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
where you put it - make a right click on it - RUN AS ADMIN - REBOOTThen go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
the device) and try the install again.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html====================================================================
Check with Toshiba support, their drivers online (update or reinstall) and their forums.
Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
-
Tried to install Lightroom 6 on my Win 7 PC. He gave me the error code 15. I ran the CCleaner which has been proposed. Then tried to install. Now, it seems that he thinks that I'm running Vista on my computer because it says that Vista is not supported. I'm not under Vista, I have Win 7. What should I do now?
Hi mmcmm,
See this thread: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported
Kind regards
Claes
-
Re: With DVI-d port PA3542E-2PRP Dynadock not working only not with Vista
Hello
I have a new laptop under Vista Home Premium.
First thing I'm trying to install is the driver Toshiba Dynadock - new model of a PA3542E-2PRP (with DVI port).Immediately ythe driver is installed, an alert appears explaining that the color palette will be changed because of the incompatibility. In others, the laptop screen turns off completely (until I have remove the connection to the dynadock, when she returns to normal). I then install the updated driver from the site Web of Toshiba (proposed in previous thread by Eldorado 17 Jul 07). I have trouble to install it correctly, but when I do, it corrupts one of the laptop video cards.
It have since then done a 'restoration' on the laptop, so am at square one. However, I am wanting to continue using the Dynadock if possible - of the very welcome suggestions please!
Thanks in advance
If I understand correctly, you were able to install the software on Vista Dynadock, but now the graphics driver installed doesn't work as it should I am mistaken?
Well in your case I n t see no problem with Dynadock but driver you graph. Therefore, an update of the graphics card driver would be desirable
-
Volume button doesn't work is not with Vista Business
Everyone knows what software Toshiba should I install in order to use the volume button in Vista Business? I have a Qosmio G20-102. Thank you.
Hello
Are you could not change the level of sound volume under Vista?
The problem is that only some unique Vista drivers have been released for Qosmio G20 and not all functions can be used.
But don t give up Andrej! There is a hope! Thanks to all the forum users who post proposed solutions!I found this very long, but interesting and useful article about the installation of Vista on Qosmio G20.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20494The user FranciscoJr is a guru of the G20 Vista + Qosnio ;)
A hint; some of the objects of Toshiba value added package for the G30 can be installed on the G20.
Install only the selected items. Otherwise, you will have conflicts with the windows Mobility Center.Good luck
-
Dell Inspiron Fingertapps/Touchzone does not work very well under Vista
Fingertapps /Touchzone on my new Insipiron Dell ceased to function fully. I tried to download the latest version of Dell, but this has not fixed this problem.
The Fingertapps in on my new Insipiron Dell Touchzone ceased to function fully. I tried to download the latest version of Dell, but this has not fixed this problem.
You must contact the Support Technology Guide for assistance with these products at:http://support.dell.com/support/index.aspx?c=us&l=en&s=dhs. As this is a new Dell computer, it will still be under warranty and they will be more than happy to help you. We know nothing about the function of these programs or how to fix therm (or at least in my case, even what they're doing and I have a Dell).
I'm sure that they that they can help you get this installed and working properly.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
CD player not working not not under Vista
* original title - cd drivers not working *.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
http://support.Microsoft.com/kb/982116/en-AU
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/GP/cd_dvd_drive_problems
See if the information above solves the problem.
See you soon.
Mick Murphy - Microsoft partner
-
Laptop 15-AC121DX: touchscreen works do not under Windows10
Got this new laptop yesterday, and everything works fine apart from the touch screen, is not running when started under win10, was phone with 2 hours support, did all the tests, the display works, but finally started it does not work, has managed to find the latest drivers on the egalaxtouch site, still does not work tried later MS MS catalogue, I guess I have to wait for a update or bring her back? like the pc, fast, pleasant and 6 GB 1 TB for 399, but no touchscreen, not a matter of circuit breaker but would be nice if it works properly... and support site when I choose my model it is stuck in a loop constantly ask for the model number...
Paul
Try to remove grey pilots and EGalax driver, reboot and see which installs Windows 10. Should not install a non-compliant driver.
-
Tecra M9 and M10 wheel Volume does not not under Vista
Hello
I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.
If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?
Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.
Thank you
PaulMaybe you are trying to install the driver Audio of M9 M10 or vice versa?
You install the driver Chipset Intel and value-added package first? (this is important)
-
Age of Mythology Gold Edition works only not with Vista 64
Ok. Same computer. Different operating systems it works very well. It is a problem of Vista 64. When I start Age of Mythology or Age of Mythology Titans he keeps asking the number of CD 1. This version came on a DVD. Even if the DVD is in the DVD player I am always asked the same question. What is going on? How should I do? Oh! The other operating system, I've tried is 32-bit Windows XP. Yes it is a 64-bit computer.
For those who are interested,
I tried all the proposals by Gloria. No worked. There is no update I can find on the Microsoft Web site. So! If you want to use your Windows XP games, you need to do. It is still possible to run the 32-bit of Windows XP on a 64 bit system. I created a system boot duel using Vista 64-bit and 32-bit of Windows XP. The system is set to boot Vista normally. You can select Windows XP 32 bit on startup when you want your 32-bit games. I was forced to do it with my MSTS as well. I have a control RailDriver. There can be no drivers 64 bit at the time of writing.
The foregoing is shared so that others can benefit form, what has been done. By the way. Not all 32-bit games need this treatment. -
Administrator password does not not under Vista
I have a new desktop computer with Vista and have worked on getting it set up. I've set up user accounts, but my password of the administrator account does not work. I tried all the options and checked the capslock and even tried a few misspellings, even if I don't have a problem the first 4 or 5 times I had used it. is there anyway to reset it without having to reinstall Windows since I don't have a password reset disk?
You did not account for additional user with administrative privileges? If this isn't the case, you will need to use a program like NTpasswd empty password for your account, so you can connect.
Download the bootable CD .iso image file, burning with burning software, third party (as an image, not in the form of data), starting with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.
http://home.eunet.no/~pnordahl/ntpasswd/
Once you're back in the system, here are my suggestions for how to configure user accounts in Vista:
You absolutely don't want to have only one user account. In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
MS - MVP - Elephant Boy computers - don't panic! -
backup service Windows are not not under Vista Business services
The backup service is not listed in the list of services under administrative tools. What is the name I have to search on Windows Vista Business (Ultimate used on this machine before but not more)?
Hello
It's an instance of installation of vista operating system that you have posted in
This is a microsoft specific forum for backup issues
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
Graphics driver does not not under Vista
first disable my graphics driver does not work. & I don't know how to fix or install. What should I do? that you install? I am computer jargon challenged. so if you could speak in terms I can understand & explain to me if I do not receive it. I'd be happy. TY Heather
* original title - need a lot of help please.*
Hello
Troubleshooting explains how to upgrade the video driver (graphics card) and others as needed.
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - graphics card - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on set to update driver
(this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
their own software and drivers and all other main drivers that you have.Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
installation.Always check in the Device Manager - tab drivers version you install actually shows up.
This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
install a driver - reboot - check that it is installed and try again if necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
-
Copy / paste does not not under Vista
I use the piece of garbage called Vista Home edition.
Microsoft can't even their own system to work. They may not even recognize their OWN identification numbers when I go to get help.
What kind of society.
Copy and paste it on Vista Home edition does not work and has not worked for a long time.
Any ideas how to operate?
If your cam to pre-installed operating system OEM may be responsible for your assistance and not Microsoft support?
What ID product fails to be recognized? There is a time limit on how long Online Support is available to you the spirit, to get the thing to work seems to involve jumping through hoops in my opinion. Some things you have to do is to add sites to the IE Trusted Sites, allow ActiveX to run and possibly start IE by right clicking and selecting the option 'run as administrator '. Even in this case it can be successful, I am yet to find someone who contacted Microsoft through their online Support successfully, I suppose it should work, otherwise the person at the end of the right Microsoft got a real cushy job.
Microsoft Technical Support phone numbers
http://support.Microsoft.com/kb/319726/en-usMicrosoft U.S. Office locations
http://www.Microsoft.com/about/companyinformation/usaoffices/en/us/default.aspxOnline Assisted Support options
http://support.Microsoft.com/select/default.aspx?target=assistanceMicrosoft contact information - Is supported by the phone number, Email
http://support.Microsoft.com/GP/phonelist#phoneUpgrade to Windows 7, Office Small Business has lost
http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/75af1220-321b-48A2-990c-4297ed0647cdWhat's the problem with him copy / paste? Drag and drop work for you? Have you tested with another mouse? They work if you log Mode without failure or creates another user in Normal Mode?
Vista Advanced Boot Options (or 7)
http://Techblissonline.com/Vista-advanced-boot-options/How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Take a look through some of the similar posts on toward the right in 'related topics '.
Help please! I can't use the copy & paste!
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/e04cc6b7-cb95-4e24-b69f-5857eb3fea01Not possible to paste pictures of MS Word for widows Mail?
http://www.Vistax64.com/Vista-mail/116614-not-possible-paste-pictures-MS-Word-widows-mail.htmlNo shortcuts keyboard Ctlr C then Ctrl V or Ctrl X then Ctrl V work?
Maybe you are looking for
-
Firefox sync works with my iPhone?
Firefox sync works with my iPhone 5 c?
-
Apps will not install or update on wifi
Hello world I'm having a problem at the time where apps just not update or install when it is connected to a WiFi network but are on mobile data. I open the App Store and go to update a applications based on notifications, but all I get is the spinne
-
This morning at 10: 30 PDT when I opened Firefox browser, I had a type arcade of its follow-up of a siren sound that will not go away until I closed Firefox. Please help me get rid of this annoying noise! This has happened Each time Firefox opened to
-
If I had a contact and now shows '? "does that mean?
Greetings, If I had a contact coming online, green, went far etc, but now it says "?" in gray. This means that it has deleted his ACC? See you soon
-
Primary (internal battery) error on HP Pavillion Sleekbook 15b006e 601
Hello.. Please help with the following. I'll try and give as much detail as possible. Model: HP Pavilion Sleekbook 15-b006ee - link Product number: C6K62EA Windows: 8 I get the main (internal) 601 battery error on my sleekbook. Some other positions,