G62 b90 - ev: black screen after Windows loading

Similar Questions

• Windows Vista does not boot, black screen after "windows loading files...". »

  I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

  Hello

  The possible fix is the same that you can not boot the system currently.

  You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
  or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
  a repair/recovery disk which is bootable.

  It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
  a BestBuy or other BigBox stores) or Support from HP is required.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Aspire R7 572 G having a black screen after windows update 8.1. What should I do

  Hi all

  IM wondering, anyone having this problem before, Im of the problems with this black screen after startup, it happened yesterday I think microsoft needs to have updated some drivers rendering my black screen after startup. Initially, I thought it was my SSD, but it turns out that I can't get into Safe Mode.

  I read more info on this problem related to the other PC and try the preferred method of 'disabling' drivers Intel GMA HD. It worked, however, this means that the main driver is now reduced to a graphics card video standard with vram limited.

  I tried to roll back and even redownloading and reinstalling the intel driver in version VGA_Intel_9.18.10.3215. The blackscreen after boot have yet taken place. I missed something?

  This is an old version of Intel drivers.

  Try this, after uninstalling the old pilot Intel:

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=63519...

• Windows black screen after the loading screen

  OK, so when I start my computer, it loads ok until it reaches the windows loading screen then the screen goes black. I can see the good mouse but that's all. I can also spam the 'shift' key and hear the sound of the keys sticky so I consist the computer is simply not exposed. IV looked on the web and say safemode works but it doesn't. IV tried to do a Factory Reset, but I'm not 100% sure how. If nothing else there can you please help me do this. I have a HP desktop computer.

  The help is GREATLY appreciated because I really need to use my computer. Thanks :)

  Hello

  To restore your system check with support of the manufacturer of the system as they all have their own methods.
  (See InPlace upgrade / repair Installation and recovery following Options.)

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  ================================================================

  Some of them may not work now however they are abandoned in just in case get you some
  access.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista - available Installation only if you access Windows
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• NB100 implemented black screen after Windows (with bar)

  Hello
  I have laptop nb100.

  My Windows XP is not loading (learn how to Windows with screen bar, then it blocks black).

  I thought just re-intall Windows XP, so I tranfered my WinXP to .iso format and placed on my formatted USB (XP and .iso seem well).

  I changed my computer to boot from USB and f12 on start up and it goes to the USB port, no probs. Then, I get a black screen with these choices:

  1, text-mode Setup (flash start again after)
  2nd, continuous mode GUI installation, setup + 1 start windows
  ---> DEBUGGING Options. Try if you have the hal.dll error<>
  Debug the rdisk 1 2 boot partition
  Debug the rdisk 1 3 boot partition
  Debug the rdisk 1 4 boot partition
  Debug the rdisk 2 1 boot partition
  Debug the rdisk 2 2 boot partition
  Debug the 2 3 rdisk boot partition
  Debug the 2 4 rdisk boot partition

  Option: text-mode installation 1, (start to flash again after).
  kicks in a blue screen with the Windows installation
  wallpaper load some info
  then it crashes on Setup starts windows

  I have Win Xp SP2, was originally installed SP3, but can not find the drive (have to SP2 and 3) so I have Win XP SP2 through ISO then installed on usb (not sure if that is the question)

  All I want is to re - install the computer (no I have not re - install discs), so I thought it would be easier to re XP - install.

  Any assistance received very highly.

  Thanks in advance :)

  Hello

  > so I tranfered my WinXP in .iso format and put on my formatted USB key

  Sorry, man, but I did not understand how you have transferred it.

  I advise to get windows copy disk and USB drive to make a bootable usb drive to install windows.

  You can make a USB bootable in 2 ways:

  1. manually with the command prompts

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53324&TSTART=60

  2 automatically using programs such as WinSetupFromUSB or Novicorp WinToFlash

  http://myeeeguides.WordPress.com/2008/11/15/winsetupfromusb-install-Windows-XP-from-USB-flash-drive/

• Vista black screen after the loading bar

  I have the problem that I am assuming that almost all users of Windows Vista have probably experiences - the black screen with the white cursor lonely after the loading bar 'Microsoft Corporation'. Here are the steps that I tried to solve the problem, but have not yet worked:

  • With the help of "last known good configuration" brings back me to the screen and the white slider
  • Go into safe mode which brings back me to the screen and the cursor
  • Activate the video mode low resolution which brings back me to the black screen and a cursor
  • Using Ctrl + SHIFT + ESC to appear during the black screen Task Manager
  • CTRL + Alt + Delete does not work on the black screen
  • I do not have access to the installation CD, as it was preinstalled on the computer

  Yes, as usual, what happened after a windows update - I really should stop waiting for something good to these updates.

  I'm under the original version of Vista Home Premium without service pack - these caused a similar problem, but at least I was able to return the system restore.

  Thank you in advance, I know how useful these forums can be.

  Yes, a new installation of Windows 7 was the way for me. Lucky he composed a back all my documents, however. Thanks for the help all. Unfortunately I have no where near more closely to solve the problem, then when I started.

• black screen after windows startup

  Hello

  I have hp g62 after windows startup, I got a black screen then I restart the pc in safe mode and then disable the graphics card can always turn off restarting the pc, it works but the graphics card
  Please help me for this problem.

  Hi ridha_bargaoui,

  Would you try to install the driver from the HP site and not the BOF the ATI Mobility site.

  Here is the link to the drivers PC laptop G62-b18SA, for the recommended drivers for your system.

  When I look at the spécifciations for your system, if shows that you have an Intel graphics card. HP G62-b18SA Notebook PC product specifications

  Once the page is displayed. Click on graphics and download and install the driver Intel.

  Failure then I suggest you do a recovery to factory.   Performing a recovery of system HP (Windows 7)

  You will receive a prompt during this process, to back up your personal files to avoid data loss. If you did not recently, I suggest you only do one now.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  I hope this helps.

• Aspire 1810 t black screen after Windows 7 update

  For a month or so, after a updates Windows 7, the next time I turn on my Aspire 1810 t., I get a black screen.

  I refill 5 - 10 times play with various combinations of FN + F8, CTrl more Esc, etc. seem to rear brng.

  Is there a better solution?

  Read the Web to remove/replace the battery and made the tour?

• Satellite C55-B5101 - black screen after Windows update

  Mobile received Christmas day (all new) Satellite C55-B5101, saves Windows update (formerly 8.1) by getting only now black screen... Not very in computers so if you know what please he dumb down for me! Thank you

  Hello.
  I'll post a similar problem with mine. Here is something I've read elsewhere that can solve yours.

  Unplug the cable from the main charger.
  Remove the battery if possible.
  Press and hold the power button for 1 minute.
  Leave battery and connect the cable.
  Turn on.

• black screen after windows 8.1 update

  Hello. I updated my laptop to windows 8 to 8.1 and when it restarted it shows just a black screen. I restarted the computer and has executed a HP diagnostic test and got this reading: failure of intelligent control, Id: product rlh2tk-6jx75x-mfgjw1 id - b 60, 603: d1e80ua #aba. Help, please!

  lletram18 wrote:
  Hello. I updated my laptop to windows 8 to 8.1 and when it restarted it shows just a black screen. I restarted the computer and has executed a HP diagnostic test and got this reading: failure of intelligent control, Id: product rlh2tk-6jx75x-mfgjw1 id - b 60, 603: d1e80ua #aba. Help, please!

  Hello

  It indicates that your hard drive is facing iminent failure / failed.

  You need to replace the HARD drive, contact HP in your area for replacement, if you are covered by the warranty.

  Please also read the following article:

  Laptops HP - SMART disk error

  Its recommended that you back up all your files, programs on an external HARD disk or disks.

  If you have not created recovery disks yet, you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all required them drivers and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  Hope this solves your cpncern

  Thank you

  CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.

  CLICK ON BRAVO IF YOU LIKE MY ANSWER *.

• black screen after windows vista startup load

  I start my computer it gets same as always, its starts to initialize, insofar as the screen that says microsoft Corp. with the loading and then bar goes completely black when he should go to the screen that asks for my password.

  I had no any hardware change, any newly installed programs or anything, just seems to have come out of the blue

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Black screen after Windows Update 8.1 in Dell Inspiron 15R 5537

  Hi guys,.

  Hello, I have updated my Dell Inspiron 15R laptop 5537 Windows 8 Pro to Windows Pro 8.1 by using the Application Store.

  After a wait of nearly 6 hours, update has been made and after the installation of Windows, display was black, cursor blinking... I checked in the Microsoft Web site, and I found that not only me and a lot of Dell customers are facing the same question. I luckily managed to start in safe mode and I uninstalled both of my video drivers and I'm back to my windows 8.1. After that I updated my video drivers as shown in the link below, always my screen turns off. If I had no other choice than the reset my pc to windows 8 pro.

  Driver video link: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/inspiron-15r-5537?driverId=PWTRP&osCode=W864&fileId=3287401962&languageCode=en&categoryId=VI

  When I was checking for the latest version of the driver for Intel Graphics & AMD Radeon that supports windows 8.1, I am able to find a driver on the dell Web site.

  http://www.Dell.com/support/drivers/SG/en/sgdhs1/DriverDetails/product/Inspiron-17R-5737?driverId=6GGGM why it is not being updated in the list of corresponding product drivers... In fact I think that it is the fix. I'm not sure.

  If one has updated and I need technical support dell for this

  Hi guys,.

  After much research, I understand that is the problem because of the Intel video driver. There is a beta Intel video driver package that supports Windows 8.1. Try this update package and display your results. As I've already restored to windows 8. It will take at least 4 to 6 hours to update me the State. The link below is for Dell Inspiron 15R 5537 model.

  http://FTP.Dell.com/published/pages/Inspiron-15R-5537.html and install Intel HD Graphics Driver ver 10.18.10.3308 4400. You must follow the link because this driver is not yet downloaded in Dell drivers & downloads (referred in Dell Post)

• frozen computer and now it is black screen after Windows Update

  My computer automatically starts an update of Windows today and it has been locked or frozen for 2 hours. All I have now is a white screen. What should I do?

  (written on my iPad that works)

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

• Black screen after the Windows Logo

  I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

  I use windows 7 ultimate 32 bit with the latest drivers & updates

  Hello

  What is the code of Bug_Check of BSOD?

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.