VGA-HDMI TV as monitor detects not

Similar Questions

• Pavilion s5280t: computer froze. New get a short beep and a long beep. Monitor detects not hard drive

  Frozen screen. You had to start hard. Now getting nothing. Heard moderate beep then a long beep. Monitor does not detect the hard drive. I disconnected everything but drive hard and always hear signals.

  Hello

  This posted information about the BIOS beep codesHP.

  What do you think of the problem based on the beeps you hear?  memory?

• No signal found by HDMI or DVI monitor. Monitor detects the VGA signal very well.

  That is the problem. I used to get a signal from the HDMI cable or the cable DVi on my old monitor.  Then, the signal was there sometimes, and then it isn't.  Now my new monitor does not have an HDMI or DVI signal.  He finds the signal to the VGA and that works.  Any ideas?  Myself and a few others have no idea on how to solve this problem >

  Hello, billiardsnut

  You use a DVI or HDMI adapter?

  Assuming you are using a straight DVI-> DVI or HDMI-> HDMI Cable, try to turn off the computer and turn off the monitor, connect the DV or HDMI, then turn them both.

  Some video cards will not dynamically change on its own, following the steps above will generally establish the proper output.

  In addition, since you mention on your old monitor that it is intermittent, it might be that the digital (DVI/HDMI) port on your graphics card is a failure.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 2310ei monitor (DP/DVI-D) laptop VGA/HDMI

  So, I recently bought the HP 2310ei monitor. It has DisplayPort and DVI - D connections.

  Initially, I had planned to use a VGA/DVI adapter, but I didn't know that there is a difference between DVI - I and DVI - D. Now I wonder, what is my best option?

  Buy a DVI - D Vga adapter? Or a DisplayPort Vga?

  Or maybe go with HDMI DisplayPort?

  Official website of DisplayPort that I read that there is no effective way to connect a laptop VGA to a DisplayPort monitor due to the analog/digital, whatever, that means, but in another topic on this Board, I also read that someone who bought a HDMI cable to DisplayPort could not make it work , so I'm a bit at a loss.

  What are my best options?

  When you request support, please provide the number name and/or product complete the model of the computer that is connected to this monitor.

  It is not a VGA adapter, DVI - D, or a VGA adapter DisplayPort on the market however there may be some expensive active converters. Depending on your exact computer and video output ports, you have few options. You also ask of HDMI DisplayPort goes, it can be assumed that your computer is equipped with an HDMI output. If this is the case... the easier, cheaper, and is to connect a HDMI output for HP 2310ei with a HDMI-DVI cable.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Setting up dual monitor does not no - one another display not detected

  I connected a second monitor (Acer V173) for my (AMD Radeon HD 7770) graphics card. Update the video card driver. I connect to my graphics via a Display Port/DVI to VGA connector card (the monitor has no DVI). And it is not working properly. Is there a way can I fix?

  DisplayPort sends a digital signal. He can't drive an analog (VGA) monitor.

  Only DVI - I includes an analog signal. DVI - d digital only.

• Adobe Premiere Elements 12: not compatible with EXECUTE-programm for my monitor detected an update is necessary.

  I got the message during the opening of a new project in Adobe Premiere elements 12: not compatible with EXECUTE-programm for my monitor detected an update is necessary. I tried several updates but windows7 does not detect an update. What can I do?

  Update your graphics driver.

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• HP laptop PC 15 15-r108ne: [HELP] HDMI to VGA and VGA-HDMI

  Hello
  
  On my last post [ http://h30434.www3.hp.com/t5/Windows/Pink-Screen/m-p/5649113#M16485 ] I published on my pink screen and it looks like I can not fix it, so I decided to borrow some monitor from my uncle, but my uncle give me with VGA monitor which is my laptop computer contain only HDMI so my question here
  
  Through HDMI to VGA and VGA to HDMI is the same?
  Is it the opposite?
  
  because I go to buy a product that is http://www.lazada.com.ph/15-m-premium-high-speed-vga-to-hdmi-cable-blackred-4550737.html and the title of the product is 'VGA to HDMI' not 'HDMI to VGA?
  Please help I really can't respond directly to google

  Hello era Kantoku.

  NO it used to work and its not backward compatible.

  HDMI is a pure solid digital signal and analog VGA . A passive cable will not work for this conversion.

  You need an active adapter specifically for the digital conversion analog.

  This adapter has received good reviews on Amazon. Look for something like this...

  Vtin gold plated 1080 p HDMI / VGA male/female video: Amazon.co.uk: Electronics

  Does that help?

• Can satellite A100-806 - I add HDMI to external monitor?

  Hello.

  I have this laptop a few years now and works well. I would like to put another screen on my laptop so I would have 2. The laptop and the new. The problem is, that I hooked up with a screen with a resolution 22 1900 - 1080, and the large screen is not as I wanted to be. He had great big windows. He told me that the big monitor could not catch the max resolution.

  Any ideas on what I should do?

  My A100-906 of what I know has a VGA input. I am able to add HDMI on it?

  Thanks in advance, panagiotis.

  Hi lualua.

  > He had great big windows
  I think that s because you don t use the native screen resolution of the external monitor. If the monitor supports 1080 p screen resolution you must set it to external monitor. Then, do a right-click on the desktop and choose screen resolution. Select the second monitor and set the screen resolution of 1920 x 1080.

  > My A100-906 of what I know has a VGA input. I am able to add HDMI on it?
  It s no entry of port, your computer's VGA port is * exit *. In addition there is no HDMI adapter to VGA must use the VGA port of your laptop to external monitor.

• Satellite L550-117 - how to use VGA + HDMI at the same time?

  Hello
  I have a Satellite/Satellite L550 series Satellite L550 - 117.
  Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
  I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

  Is it possible with this notebook and how?

  Thank you

  Hey Buddy,

  Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

  Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

• DMA2200 on PC-monitor does not work?

  Hello

  Well I have except the fact that the DMA2200 support not the VOB files, that the dvd drive is not region free and I had to reverse the mistakes of codes avi using the FourCC change codec, I'm surprised that I'm not able to see anything on a standard PC monitor.

  At first, I plugged the Componet video output (Y, Pb, Pr) of my DMA2200 directly on the vga input of the monitor (Dell 1900FP) with a cable special nine, but I saw just nothing more than a black screen. I changed the monitor for a LG Flatron L222WS monitor told me that the frequency was out of reach... Certain signals does not cross?

  But as the DMA2200 has a HDMI output that welland the Dell1900FP supports DVI - D Dual Link entry too, I. The 1900FP has a resolution of 1280 x 1024 and it can be run up to 75 Hz, 60 Hz it's native refresh rate. So, I went back to the store and bought a HDMI<->DIV - D Single Link cable.

  Only one? Yes, why not!

  DVI dual link as its name suggests has drivers more than the single link DVI for signal transmission. Single link DVI supports a maximum bandwidth of 165 MHz (1920 x 1080 at 60 Hz, 1280 x 1024 at 85 Hz) and use 12 of the 24 pins available. Dual link DVI uses all 24 pins available and supports a maximum bandwidth 2 x 165 MHz (2048 x 1536 at 60 Hz, 1920 x 1080 at 85 Hz).

  So, I plugged the HDMI<->DVI - D on the DMA2200, the Dell1900FP monitor and the monitor directly on channel 2: digital input. But... a black screen again. As I left the monitor rescanning the entrance, he tells me "Please press any key of the mouse button. It seems that the monitor sees a digital signal, but expected more... hmm... what to do?

  I tried to use NTSC (instead of our PAL) on the DMA2200 menu as the frequency changes, but it does not work. I also used all of the selections of entry on the DMA2200-menu (like composite-sd and hd). Normally, the HDMI options is grayed out and uses the default Auto option; but in composite-hd, my old TV mode (connected by SCART) turns black, but can still use the menu on the screen before the DMA and am able to change the HDMI settings, like 480 720 (if I remember correctly) and 1080 p (progressive format) and 1080i (interlaced). I hoped a solution here, but maybe it's just not my day.

  Then.

  Y at - there anyone out there that can help me to get a picture on the monitor? Whether vga or dvi - d... Please...

  Your Dell LCD and DMA2200 not being able to understand/sync between them with a direct DVI connection you could try to put a device inbetween them so that your Setup program can work. Try this device, basically, you connect the DMA2200 using RCA cables to the KWorld device and this KWorld device is then connected to your Dell LCD screen.

  See you soon.

• U2415 monitor will not connect.

  U2415 monitor will not connect.  Get the message "no connection DP.  New out of the box yesterday from Dell.  Tried the two connectors supplied DP.  Also tried HDMI to HDMI.  I was assured by the sales these last connection was sure to work.  Now the Dell support told me my only option is an expensive (~ $ 60) VGA adapter DP.  My computer is a 18 months, Dell XPS 8700 running windows 8.1.  Looks like a return if this is even possible.  Buy all Dell for 20 years, but maybe it's the end of it.

  The serial number you provided you bring here? Anyway,.

  So there are two ways to connect =

  NVIDIA GeForce GT 635 exit HDMI--> HDMI to HDMI Cable--> U2415 (on the left looking at the back) HDMI in
  * Press the key Menu of U2415
  * Go to the input Source
  * Choose HDMI 1

  NVIDIA GeForce GT 635 DP on--> U2415 CDM DP cable--> U2415 CDM in
  * Press the key Menu of U2415
  * Go to the input Source
  * Choose MiniDisplayPort

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• second monitor does not... Help, please!

  Hello

  Computer: HP Compaq

  Model: CQ2700ED

  Windows 7 Home Premium 7SP1

  I hooked a second monitor (Samsung with VGA connector) DVI-d port.

  I use an adapter from dvi/VGA

  When I turn on the second monitor, he says: "check signal cable".

  In Control Panel / video, he did not see the second monitor.

  What could be wrong?

  Best,

  Rob

  Here are the specifications of your desktop Compaq CQ2700ED. According to the specification, this model has a DVI - D output (digital only) and a VGA (analog only) output as shown below.

  

  (2) - port VGA port DVI - D (3)-

  There is no liability "adapter" that can be purchased which allows to convert a digital signal to analog. The only way that you will be able to use two monitors with this computer in its current configuration is using a monitor with VGA input and a monitor with DVI - D input.

  Please provide the number of brand and model of both monitors you are trying to connect to your computer. This will allow us to determine options that you have with your existing monitors.

  Please send Bravo

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.