Analysis with os 5.0 and Qr code barcode

Similar Questions

• What's wrong with my muliple drag and drop code?

  I've got ParaA, Perrault and ParaC ( http://img.photobucket.com/albums/v292/pancreasboy/misc/para.gif ) who are dragable mc (ie they have buttons inside them with the code below), they may fall on the mc Para1, Para2 and Para3.
  
  Here is the code for the button appears:
  
  on {(press)
  
  startDrag (this, true);
  
  This.ox = this ._x;
  This.Oy = this ._y;
  }
  
  on (release) {}
  
  stopDrag();
  
  {
  If (this ._droptarget == ' / Para1 ')
  
  {
  _root. Para1.gotoAndStop (2);
  }
  
  If (this ._droptarget == ' / Para2 ")
  
  {
  _root. Para2.gotoAndStop (2);
  }
  
  If (this ._droptarget == ' / Para3 ")
  
  {
  _root. Para3.gotoAndStop (2);
  }
  
  on the other
  
  {
  
  This ._x = this.ox;
  This ._y = this.oy;
  
  }
  
  }
  
  stopDrag ();
  }
  
  When you drag ParaA all the MC Para1, Para2 or Para3, it executes the relative _root. Para # .gotoAndStop (2); but only clings to the Para3. Did I miss something?
  
  Thanks in advance.

  The "else" is only for the last 'if', which is the MC para3. So if the target was para1, it always checks the other ' if, and because it is not para3, it will run the "else" and return to the starting point.
  Achieve its connected by adding an 'else' for other targets:
  If (para1) {...}
  ElseIf (para2) {...}
  ElseIf (para3) {...}
  else {...}

  Alternatively, you can use a switch statement:
  switch (this ._droptarget) {}
  case "/ Para1":...
  break;
  case "/ Para2 ':...
  break;
  case "/ Para3:...
  break;
  default:...
  break;
  }

  HTH,
  blemmo

• How to set up a chart and store data points in a table to allow me to do the analysis with him

  Hello

  I am relatively inexperienced, with the help of labview and I try to do the following with the help of an oscilloscope Tektronix TDS 2001 C but have no idea how start.

  (1) load a previously saved regarding the volts/div and setting s/div on oscilloscope

  (2) pass everything that appears on the o-scope on my computer screen

  (3) save the data table so that I can do a scan with it

  I watched some of the diagrams of block of example provided with the driver I downloaded for this particular unit but am still very confused.  Any help would be greatly appreciated

  Hello Chron0,

  I know I guess a little here, but have you downloaded a specific device of ni.com/idnet driver?  This is a good place to find the built-in drivers for third-party devices, and there is one for this particular model.  That being said, when I looked at the examples in the downloaded zip file, I saw a couple of predefined options that look like they should satisfy question #2 of your project based on the method to use to acquire a waveform (permanently, several waveforms, etc.).  Similarly, in the Public folder is a configuration of channel VI which I think should satisfy what you are wanting to do to the #1 question.

  Depending on what you are willing to do data analysis, with regard to the software used, functions, etc., there are several reporting tools in LabVIEW which will allow you to save the table and manipulate later. A good place to begin with, it will be to search for "File i/o" in the search bar helps LabVIEW and select the option under the heading "Palette."  There are several options here that I think might be useful, including writing in the file.vi worksheet.

  It will be also good to be familiar with the Finder example OR in LabVIEW.  There are examples of spreadsheets / saving data, as well as VISA, which you can do some reading on, because the interface VISA, it's how you communicate with this device (Fortunately, the driver already download it!)

  Good luck to go ahead and keep us informed here on your project!

  -Dave C

  Technical sales engineer

  National Instruments

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Try to install the items 13 and it requires a serial number. The instructions show the number should start with 1057, but there is no code on the discs, the box or envelopes, only the discs came from 1057. I can't activate the software without this c

  Try to install the items 13 and it requires a serial number. The instructions show the number should start with 1057, but there is no code on the discs, the box or envelopes, only the discs came from 1057. I can't activate the software without this code, and it's a Christmas gift for my wife. Help!

  Thanks a lot... the box inside was stuck and I didn't think it came out. Awesome!

• How can I get the menu bar with preview in browser and Code, split Code, design to appear? (DW CC) Accidentally deleted and cannot locate.

  I have accidentally disabled Standard or Document to the menu bar, now I can't locate the Code, code split, preview in browser and others.

  How can I get the menu bar with preview in browser and Code, split Code, design to appear? (DW CC)

  Found.  View > toolbars > Document.

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• Work with templates, and Automatic Code changes

  I work in DW CS6.

  I create a new page based on a template and when DW created the new page, it automatically changes the paths to links to .css and .js files.  These changes are the failure of the model.  Is there a way to keep the auto-changements occur?

  BTW - all the pages have been created with a different model and I was able to edit pages and apply this template to these pages without problem.  Everything is beautiful.

  Code in the original model:

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  "< html xmlns ="http://www.w3.org/1999/xhtml">".

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"

  <!-TemplateBeginEditable name = "doctitle"-->

  < title > the Information technology (it): (DADS) < /title >

  <! - TemplateEndEditable - >

  "" < link href = "... / assets/coo.css" rel = "stylesheet" type = "text/css" media = "screen" / >

  "" < link href = "... / assets/sform.css" rel = "stylesheet" type = "text/css" media = "screen" / >

  "" < script type = "text/javascript" language = "javascript" src = "... /Assets/jQuery-1-FontResizer.js" > < / script >

  "" < script src = "... /Assets/jQuery-FontResizer.js" type = "text/javascript" > < / script >

  "< script type =" text/javascript"src ="... / p7epm/p7EPMscripts.js "> < / script >"

  "" < link href = "... / p7tmm/p7TMM02.css" rel = "stylesheet" type = "text/css" media = "all" / >

  "< script type =" text/javascript"src ="... / p7tmm/p7TMMscripts.js "> < / script >"

  "" < link href = "... / p7epm/epm52/p7EPM52p2.css" rel = "stylesheet" type = "text/css" media = "all" / >

  Code once I create a page using the template:

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  "< html xmlns ="http://www.w3.org/1999/xhtml"> <!-InstanceBegin template="/Templates/index_wao.dwt ' codeOutsideHTMLIsLocked = 'false'->

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"

  <!-InstanceBeginEditable name = "doctitle"-->

  < title > the Information technology (it): (DADS) < /title >

  <! - InstanceEndEditable - >

  "< link href ="file://ausimo225/devDADSView/coo/ITnew/assets/coo.css"rel ="stylesheet"type =" text/css"media ="screen"/ >"

  "< link href ="file://ausimo225/devDADSView/coo/ITnew/assets/sform.css"rel ="stylesheet"type =" text/css"media ="screen"/ >"

  "< script type =" text/javascript"language ="javascript"src ="file://ausimo225/devDADSView/coo/ITnew/assets/jquery-1-fontresizer.js "> < / script>"

  "< script src ="file://ausimo225/devDADSView/coo/ITnew/assets/jquery-fontresizer.js"type =" text/javascript"> < / script >"

  "< script type =" text/javascript"src ="file://ausimo225/devDADSView/coo/ITnew/p7epm/p7EPMscripts.js "> < / script>"

  "< link href ="file://ausimo225/devDADSView/coo/ITnew/p7tmm/p7TMM02.css"rel ="stylesheet"type =" text/css"media ="all"/ >"

  "< script type =" text/javascript"src ="file://ausimo225/devDADSView/coo/ITnew/p7tmm/p7TMMscripts.js "> < / script>"

  "< link href ="file://ausimo225/devDADSView/coo/ITnew/p7epm/epm52/p7EPM52p2.css"rel ="stylesheet"type =" text/css"media ="all"/ >"

  You saved the file newly created to the site yet?

  It will show the wrong link until you save, even if everything is configured correctly.

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• Error 80070490 continues. Fix - It of MS, analysis system, sfc/scannow tool and more do not help. Please can you help me walk me through this WITHOUT formatting and starting over?

  Error 80070490 continues.  Fix - It of MS, analysis system, sfc/scannow tool and more do not help.
  I can't use the Windows installation CD because the 'upgrade' option is NOT available!
  Seems like everything is against me trying to find a way to solve this error.  I have run these scans,... rebooted several times and no luck.   Spin on a startup select too trying to solve probs.  I use MS Security Essentials that updates automatically. : (Had this problem 6 months ago and email support walked me through to solve.)  However, the link to that support is no longer available.   I would LOVE it if MS Fix - It really solve problems WU, but not for me and it looks like a lot of people posting here have the same chance.

  Running Windows Vista Home Edition with SP 1 and SP 2.   All Windows updates are automatic until almost a month ago.

  Microsoft Security Essentials auto updates, scheduled full scans.  Scanned for malware and some found and removed.
  All MS site suggested I have try, I tried.  Fix, it doesn't do a thing.
  HELP :)

  Please refer to this post by another user:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/code-error-80070490-checking-for-Windows-updates/4e8d0b9c-267f-46fa-9963-ea344ec886e1

  I hope this link helps and good luck Toni J...

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Measurement of angular position with encoder in quadrature and NI USB 6281

  Hello.I have an application developed with labVIEW 7.1 and 6014 OR for the measurement of angular position using encoder quadrature, where are used 3 sons - one of them connected to the source, second to the OID (0 or 1) and a third to digital ground. I can't use the same application or NI USB 6281.Now connections, I would like to know how I can create a similar application in labview 2009 and how to make the relevant connections for NI USB-6281, which is a mx NI DAQ device. Please suggest. Thank you.

  I have my loan application. I understand there are big difference using LabVIEW 2009 and NI USB card, compared to the previous version I was using THE LabVIEW 7.1 and a traditional daq. The difference, I should say that wellness is both in terms of simplification of code and the accuracy of the result. I was a little surprised, showing results. Thanks a lot to JB for your time and sharing those pieces of details.

  I can well after awhile my code in the forum. Hope this helps someone like me looking for a similar application.

• Why my front panel opens with a white background and most of the invisible control

  When I open my vi and several others, they open with a white background and most of the controls not returned as theis

  

  After I resize it looks like it should

  

  It's probably somewhat similar to these problems of crazy object.

  Sometimes copy/paste works because it takes your code on a VI that could have a corruption and put in a cool VI.  In your case, the corruption could be linked to the control itself and he just copied over in the new VI.  Money controls are a relatively recent creation which added some fancy appearances.  They don't seem to be the style that is most likely to have some behind the bugs of scenes from the styles of controls that were longer.

  If you have a shared services provider, or if a person nor jump here and wants to study, they want to can see your VI and understand what goes wrong.  If this isn't the case, I hope that what you've done has solved the problem and you can spend without return.

• Error code = 16600 and error code = 17110

  Error code = 16610 and error code = 17110

  The child's account cannot check e-mail.

  Your account is not ready.
  It seems that your mother has finished setting up parental control for your account settings. Click "Access the parental control settings" to complete the process and access your account.

  Hotmail Setup incomplete.

  Sorry there was a problem to apply your parental control settings to your Hotmail account. Try again later, go to your Hotmail account and follow the instructions.

  Parent cannot delete the account:

  Colton: Sorry, the service is not available now. Please try again later. Error code = 17110.

  Colton: Your child Hotmail can not change immediately. We can send you a link to change the Hotmail settings, or you can try again later. Error code = 16600.

  Family safety is NOT installed.

  Primary school/Parent = account * address email is removed from the privacy *

  Child account = * address email is removed from the privacy *

  Does not work below:

  When you remove your child from the parental control, your child's Hotmail settings could not update. We are sorry for this topic.

  Update your child's Hotmail settings:

  1. ask to connect with their Microsoft account.

  2. ask to go to https://familysafety.microsoft.com/krl/hmnotify.aspx?p=OmaCuA3IIiM8WtcicpmFoCHjiR6rsa1 * oDgqRar4GKA6vMBO % 5EsudS % % 5EXf3ZQHYe 5Ep and follow the instructions on the screen.

  If your child cannot always use Hotmail, please wait a few minutes and try again.

  Thank you for using parental controls.

  Hello

  Please ensure that you use the latest version of the parental controls of Windows (16.4.3505.0912) for the child's computer. You can download the latest version in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-home

  Please let us know if the problem persists after you have installed the client.

  Thank you!