Windows Firewall page controls are inoperative all the

Similar Questions

• Windows Firewall settings cannot be displayed because the associated service is not running

  I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.

  Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
  is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
  than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
  you are, of course, that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• I installed 5.6.2 Pages but all my old documents will open with ' 08 how can I delete the Pages ' 08 and update all the old documents

  I installed 5.6.2 Pages but all my old documents will open with ' 08 v.3.03 How can I remove the Pages ' 08 and update all the old documents

  5 pages is located in your Applications folder.

  Pages ' 08 is located in your Applications/iWork ' 08 folder.

  If you open your old documents Pages ' 08 with 5 Pages it will convert and if not damage, remove a large number of useful features.

  You will probably regret upgrading to 5 Pages which Apple has made extremely inconsistent and keeps changing its file format.

  Peter

• How controls are grouped in the front pannel "write basic series and Read.vi.

  I wonder how the controls are grouped on the front. An example is the "basic series write and Read.vi. The rocker of Scripture and the 'rope to wirte' are grouped in a raised area. I couldn't move individual out of this box control when I tried to arrange the controls. How they are grouped and how do I move them individually?

  Thank you.

  

  Select the Group of controls you want to Group/Ungroup and select the option group/ungroup as shown above.no wonder in this

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  You can check with the manufacturer of the camera, whoever it is.

  You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

  Good luck.

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Why has web page formatting disappeared and all the text has piled up against the frame of the left page?

  It's like watching a plain but page of text under contract almost without attributes. There are links, but the page is difficult to use. The background image disappeared and so has experience change. The links do not work.
  Mozilla pages seem to work.
  It could have occurred due to a cleaning by CCleaner file, but is not sure because there were hours between occurrences.
  It has happened once before and could be fixed except by deleting the installation of Firefox and resettlement.
  I looked through all the possible settings but no luck.

  I have the same problem idk how it started, but I've tried all these solutions, it doesn't seem to work. idk what I did to do that. I even tried to reinstall firefox, but its still the same.the problem happened also when I connect to my aol account and the e-mail page was an error BUT when I chose an option on a charger base, I was able to check my mails, but I noticed that when I go in private browsing, all seems normal. I put a picture on how my facbook look at how doe it won't load

• Not able to start the Windows firewall/internet connection (ICS) service on the local computer for sharing

  It is said

  ERROR 2: THE SYSTEM CANNOT FIND THE SPECIFIED FILE

  When you try to manually start the Service. !

  System log gives:

  7035 (service has been successfully sent a start control.)

  7036 (service entered the stopped state.)

  7023 (the Windows Firewall/Internet Connection Sharing (ICS) service terminated with the following error:)
  The system cannot find the specified file. )

  Where is the specified file (which newspaper where)... ?  If I have a lack or a file corrupted how can I overwrite this file by a valid... ?

  Any help appreciated

  NVM...

  Its a Virus Rootkit,

  Download the (free) Rootkit in Kaspersky killer

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.zip

  Simple to use... Unpack... then

  Run... (Note disable any local Antivirus that is running)...  TDSSKiller.exe

  * Access to the restored Winupdate site, Miss-Direction has stopped.

  * Updates Windows restored.

  ICS Windows Firewall/Internet (ICS) personnel started successfully

  Thanks to "Joyce Liang (MS) Windows Update Support"

• After you run the fix it scan, get the message 'Windows Firewall may not be set as the default firewall service.

  I received the following message in the fix it running scan.  What should I do?

  "Windows Firewall cannot be set as the default firewall service. This may be because another firewall service is installed or because the Windows Firewall is disabled. »

  Hello

  · What fix it scan are you referring?

  · You have a third-party security software installed on the computer?

  · Who is the service pack installed?

  Run the troubleshooting utility from the link below and check if it helps: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• Windows Firewall setting managed by application of the seller

  I can't turn on the Windows Firewall.  It is said that these settings are managed by application of the seller PROVIDER of firewall NORTON.  Is it because there is a conflict with Norton?  Always before, I have had the Windows Firewall and also Norton Firewall.  I don't know how the settings have been changed.

  Have more than one active firewall is counterproductive. It slows down your computer and both programs can result in conflicts between them. If you prefer the Windows Firewall, then you should check for Norton FAQ to see how to disable the firewall component.

• MS windows 7 paint 'mostly blank Ribbon; all the tools not available. "

  Ms paint worked many years now, after a few updates, open Paint with White Ribbon for most.  Have not used since March.  But now, no tool is available to draw lines, enter the text, etc.  How one refresh you can paint, normally open as shown in all the tutorials of paint.

  RHStreet

  Hello

  You have installed the updates recently?

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows7/see-which-Windows-updates-are-installed

  If you have installed updates recently, then I suggest you to perform a system restore and check if MS Paint works correctly.  Follow the instructions below:

  a. click Start, type System Restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  Check out the link: System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Let us know if it helps.