VI in Application.exe missing Sub

Similar Questions

• Application exe missing vi sub

  Hello

  Hello

  I did based on PCI 6221 DAQ card applications.

  Hello

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  Hello

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  Hello

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  It gives the error code 3.

  No source files were found. Missing Sub Vi.

  Are all the missing Sub vi associated DAQmx.

  I found that all the Vi Sub required file Exists in the installation folder.

  Hello

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  It gives the error code 3.

  No source files were found. Missing Sub Vi.

  Are all the missing Sub vi associated DAQmx.

  I found that all the Vi Sub required file Exists in the installation folder.

  One please solve the problem.

  Hello

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  It gives the error code 3.

  No source files were found. Missing Sub Vi.

  Are all the missing Sub vi associated DAQmx.

  I found that all the Vi Sub required file Exists in the installation folder.

  One please solve the problem.

  Kind regards

  Hari

  Hello

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  It gives the error code 3.

  No source files were found. Missing Sub Vi.

  Are all the missing Sub vi associated DAQmx.

  I found that all the Vi Sub required file Exists in the installation folder.

  One please solve the problem.

  Kind regards

  Hari

  Hello

  Sorry for the post above.

  Here clearly displayed.

  Hello

  Sorry for the post above.

  Here clearly displayed.

  I did based on PCI 6221 DAQ card applications.

  Hello

  Sorry for the post above.

  Here clearly displayed.

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  Hello

  Sorry for the post above.

  Here clearly displayed.

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  Hello

  Sorry for the post above.

  Here clearly displayed.

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  It gives the error code 3.

  No source files were found. Missing Sub Vi.

  Are all the missing Sub vi associated DAQmx.

  I found that all the Vi Sub required file Exists in the installation folder.

  Hello

  Sorry for the post above.

  Here clearly displayed.

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  It gives the error code 3.

  No source files were found. Missing Sub Vi.

  Are all the missing Sub vi associated DAQmx.

  I found that all the Vi Sub required file Exists in the installation folder.

  One please solve the problem.

  Hello

  Sorry for the post above.

  Here clearly displayed.

  I did based on PCI 6221 DAQ card applications.

  I build application.exe.

  I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

  When I installed and run the application on the client computer.

  It gives the error code 3.

  No source files were found. Missing Sub Vi.

  Are all the missing Sub vi associated DAQmx.

  I found that all the Vi Sub required file Exists in the installation folder.

  One please solve the problem.

  Kind regards

  Hari

• Winload.exe missing or damaged application

  Windows opens with the boot manager asks me to insert the windows installation disc reads the Message on the page windows file: \windows\system32\winload.exe status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt

  PS: do not have a Setup disk

  > Ps: don't have a Setup disk

  That's not good.
  I think that the system or recovery disk is your last resort.
  If your laptop belongs to the European series of Toshiba you can order this disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• LabVIEW run engine time included in the application exe

  Hi all

  Back in LabVIEW 5, we could create a single LabVIEW application exe file that included the execution engine (all in a single exe file). Now, we must install the runtime engine in its own right + the LabVIEW application exe. I don't think that someone knows a way to create LabVIEW application exe files which include the execution engine in new versions of LabVIEW.

  I know that we can install the runtime automatically during the installation of the LabVIEW application.

  I know also it makes more sense to have the execution time separate from the application of updates etc, but in some cases its nice just have a program obviously installed on the system - the application of interest.

  Any soloutions neat known?

  -Martin

  The time of applications from a single file is long gone. The current LabVIEW runtime engine is a great combination of many files, including DLLs, interface model files user etc. It is not always necessary, but even the most trivial LabVIEW application today takes several tens of these files at startup even. That's how things have changed, and although there are indeed efforts to get apps to run from one place to put them on a USB key for example, LabVIEW is not really a system that lends itself to this. In LabVIEW 7.1 and 8.0, you could include virtually all of the files that make up the runtime system in the same folder as your executable file, no NOR never argued that neither they will probably move to make. With some trial and error, you can start deleting files and see if your app still worked then, but it's a tricky procedure since the application could often start very well, but suddenly encounter display problems if you have opened a subscreen or something with this subject-specific objects.

  You can probably try to simply copy all the files from the LabVIEW Runtime folder in your executable file and there is a chance that it still works, but what for? The size of the facility remains basically the same and if you happen to install both applications on the same computer, each contains a copy of all of the runtime system, so there is no gain more but in fact a setback.

  The interdependencies of these modules are complicated and some need additional components and registry settings to work properly. By offering a way to configure individually that you want to include, and what would be a total pita for the end user that nobody would really understand what is needed for what and why. Experience would be so especially try it doesn't work once, and never use it again.

  I never thought to look into this latest version of LabVIEW. Time to figure it all out is simply average too much punishment for the small gains you get. Installers are the norm these days.

  Another issue that followed, is that you need to monitor all the Security Advisory reports NOR and other bugfixes and act on them yourself whenever a component that you have added in your application must be updated. As it is now, the NI Updater can and will update the plant installed according to enforcement system and all is well.

• Access a queue within a labview application .exe built

  Hello

  I have a labview application .exe built in which there is a queue. I would like to put items in this queue to a labview vi that exists outside of the application.

  Is this possible?

  Thank you,

  labJunky

  With the correct changes, sure. For example, you can configure a listening TCP port in the .exe and send orders in this way.

  /Y

• How to develop the final application exe file that will work on PC not installed labview

  Hello

  I developed a labview application (I request manufacturers/builders and professional license).

  I generate the final exe file by the tools of-> built Application exe of VI-> fact file

  But this the application exe file runs only on machines installed labview. His works do not on the other PC.

  For the execution of the other PC I have to do.

  Hello Ramji,

  As you said, EXE is created by you and its nning ruou fine on the PC where you created such as LabVIEW is present there.

  So for LV CE, please create an installer and Add Installer/additional software required by your EXE.

  Look at the link for reference.

  http://www.NI.com/white-paper/5406/en

  Kind regards

  Leila

  CLD

• Creation of LV8.5 application EXE, Error 1502

  Hello

  I am building an application .exe of my code of LabView8.5. This is my first time doing so.

  My VI program works very well and has no errors.

  However, when I try to compile the application, I get the error

  Error 1502 to the node invoke in AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: Cannot save a bad VI without its schema.

  Method name: Save target: Instrument

  To my knowledge, there is no bad VI, like the VI to run ok in LabVIEW!

  Thanks for your help,

  David

  Construction of an exe does not actually include the dependencies, so you will be required to ensure that the dll is present on your target computer or build an installer that automatically places the dll on the computer.

• debugging a standalone application (EXE)

  Hello

  I have an application that uses ActiveX controls to communicate with two different cameras at the same time.

  I have a simulation environment in a computer where I got installed Labview 2014. Here, I built my program, and it works well.

  I created an application (EXE) and then tried in another computer that is isolated from all the networks, but it is the computer that manages the two devices directly.

  The program works very well, with the exception of a few minor errors. I want to debug the program on this computer, but I can't do it remotely, and it has no installed labview or.

  Do you know if there are any tools or ways to see my block diagram of the application or to see some of its settings while running?

  I find that this article

  http://digital.NI.com/public.nsf/allkb/8DA679805915DE40862572D5007B2F70?OpenDocument

  but it does not apply to my case because I have access to no distance to the computer that is running.

  Thank you

  A method proven (and very old!) who will work with an executable is to build in logging functions.  I got a program in real time which seemed to lose of ticks.  He was already streaming status information for the PC, but something to 'lose '.  I added code to write to a local log file some 'Debug' information, including the State of some of my digital and found lines where my 'assumptions' on my code were false (i.e. my stupid mistake).

  Depending on your situation, which can involve a lot of text to read, but that's why we have with matching text editors...

  Bob Schor

• Missing Sub VI during the opening of LabVIEW file

  When I open my main VI it is unable to find several Sub VI, but the missing Sub VI are supposed to be installed with NOR-DAQmx, that is installed. Among the missing Sub VI 'DAQmx Read', 'DAQmx Start Task', 'DAQmx stop mission' as well as a few others. I tried to open the VI using LabView 2013 and 2014 and have had the same problem with both. Any help is appreciated.

  Have you installed DAQmx after LabVIEW installation?

  You have selected LabVIEW support when installing DAQmx?

• Building an application (Exe)

  Hey guys I'm building an application of my VI in labview 2012 but there is no application (exe) option when I right click the specifications of construction even if I saved the project. Please check the attached snapshot.

  If you purchase and install, professional LabVIEW or LabVIEW Development Suite, Application Builder is included otherwise you need to install it as a separate add-on.

  Refer to:

  http://www.NI.com/LabVIEW/buy/

• NTOSKRNL. EXE missing - access denied whiletrying to copy CDs

  Hi all

  I use Win XP Sp3.

  When I tried to start, I got the following error "missing NTOSKRNL.exe.

  I used the win XP CD to start in Restore Mode.

  Go to the command prompt after you enter the credentials & entered copy d:\i386\ntoskrnl.exe c:\windows\system32\*.*

  By entering in this I get the error "access denied."

  Somone kindly indicate how to copy the file ntoskrl.exe missing in the c:\windows\system32 folder

  Kind regards

  Thaddeus Fernandes

  E-mail address is removed from the privacy *.

  Try again with the full path instead of jokers:

  copy d:\i386\ntoskrnl.exe c:\windows\system32\ntoskrnl.exe

  I think you might need to expand the file instead of copy:

  For single-processor systems:
  Expand D:\i386\ntoskrnl.ex_ C:\Windows\system32\ntoskrnl.exe

  For multiprocessor systems:
  Expand D:\i386\ntkrnlmp.ex_ C:\Windows\system32\ntoskrnl.exe

  Note that it is often a problem with the boot.ini file, and not a ntoskrnl missing actually.  See here: http://support.microsoft.com/kb/314477

  John

• Error QuickBooks 2012: QBW32. Out of unrecoverable Application EXE: application abandonment

  2012 QuickBooks first error message:

  QBW32. Out of unrecoverable Application EXE: application abandonment

  How can I fix it?

  Hi kernie,.

  Try the solution of this support of Intuit link.

  In case of failure, suggest you post in the Intuit forum for better support.

• My executable Application are missing after the upgrade to Windows 8?

  I've upgraded to Windows Vista Premium 8 and now my executable files of the application are missing? Can anyone tell where they went?

  To install Windows 8 Windows Vista or Windows XP, you must perform a new installation. This means that you will not be able to keep the settings, all files or programs when you upgrade.

  You need to reinstall your executables.

• Some applications are missing from the AAM & CCP

  Why some applications are missing from AAM & CCP?

  What are the reasons? How can I solve the problem?

  It is not clear what you mean. When applications do not appear, your system may not support them.

  Mylenium

• Wsconfig.exe missing 10 ColdFusion

  Just installed cf10.

  Installed very well but am wsconfig.exe missing config apache 2.2

  You can find it C:\ColdFusion10\cfusion\runtime\bin\wsconfig.exe