Wsconfig.exe missing 10 ColdFusion

Just installed cf10.

Installed very well but am wsconfig.exe missing config apache 2.2

You can find it C:\ColdFusion10\cfusion\runtime\bin\wsconfig.exe

Tags: ColdFusion

Similar Questions

  • NTOSKRNL. EXE missing - access denied whiletrying to copy CDs

    Hi all

    I use Win XP Sp3.

    When I tried to start, I got the following error "missing NTOSKRNL.exe.

    I used the win XP CD to start in Restore Mode.

    Go to the command prompt after you enter the credentials & entered copy d:\i386\ntoskrnl.exe c:\windows\system32\*.*

    By entering in this I get the error "access denied."

    Somone kindly indicate how to copy the file ntoskrl.exe missing in the c:\windows\system32 folder

    Kind regards

    Thaddeus Fernandes

    E-mail address is removed from the privacy *.

    Try again with the full path instead of jokers:

    copy d:\i386\ntoskrnl.exe c:\windows\system32\ntoskrnl.exe

    I think you might need to expand the file instead of copy:

    For single-processor systems:
    Expand D:\i386\ntoskrnl.ex_ C:\Windows\system32\ntoskrnl.exe

    For multiprocessor systems:
    Expand D:\i386\ntkrnlmp.ex_ C:\Windows\system32\ntoskrnl.exe

    Note that it is often a problem with the boot.ini file, and not a ntoskrnl missing actually.  See here: http://support.microsoft.com/kb/314477

    John

  • Winload.exe missing or damaged application

    Windows opens with the boot manager asks me to insert the windows installation disc reads the Message on the page windows file: \windows\system32\winload.exe status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt

    PS: do not have a Setup disk

    > Ps: don't have a Setup disk

    That's not good.
    I think that the system or recovery disk is your last resort.
    If your laptop belongs to the European series of Toshiba you can order this disc here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Re: Satellite A300D: winload.exe missing or damaged

    Hello

    I tried to make my system recovery using F8 and his works, but all of a sudden the battry during the operation failure.
    So I repated steps again after I connect the charger but I couldn't, and I got the message...

    + Windows cannot start. A recent hardware or software change might be the +.
    + talk +.
    + File: \Windows\system32\winload.exe+
    Status: 0xc000000f +.
    + Info: The selected entry could not be loaded because the application is +.
    + missing or damaged. +

    And I have no recovery DVDs to ther restore dvd,
    I need help to solve this problem, if there is an idea?

    My computer laptop satellite toshiba A300D

    Hello

    You mean that you are not able to recover the laptop using the HDD recovery procedure?
    You can begin the HARD drive by pressing F8, choose fix my computer.
    Then a new window should appear and you could choose a new option called Toshiba HDD recovery.

    If this is not possible then I think that you don't have a choice but to reinstall the OS using a Setup (Microsoft or Toshiba) disk.
    If you don t have this disc then you order on this website:
    https://backupmedia.Toshiba.EU/landing.aspx

    See you soon

  • Application exe missing vi sub

    Hello

    Hello

    I did based on PCI 6221 DAQ card applications.

    Hello

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    Hello

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    Hello

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    Hello

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    One please solve the problem.

    Hello

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    One please solve the problem.

    Kind regards

    Hari

    Hello

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    One please solve the problem.

    Kind regards

    Hari

    Hello

    Sorry for the post above.

    Here clearly displayed.

    Hello

    Sorry for the post above.

    Here clearly displayed.

    I did based on PCI 6221 DAQ card applications.

    Hello

    Sorry for the post above.

    Here clearly displayed.

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    Hello

    Sorry for the post above.

    Here clearly displayed.

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    Hello

    Sorry for the post above.

    Here clearly displayed.

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    Hello

    Sorry for the post above.

    Here clearly displayed.

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    One please solve the problem.

    Hello

    Sorry for the post above.

    Here clearly displayed.

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    One please solve the problem.

    Kind regards

    Hari

  • VI in Application.exe missing Sub

    Hello

    I did based on PCI 6221 DAQ card applications.

    I build application.exe.

    I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included.

    When I installed and run the application on the client computer.

    It gives the error code 3.

    No source files were found. Missing Sub Vi.

    Are all the missing Sub vi associated DAQmx.

    I found that all the Vi Sub required file Exists in the installation folder.

    One please solve the problem.

    Kind regards

    Hari

    I got it it works fine now.

  • . Exe missing DAQmx subVIs

    Hi all

    I built an installer for my .exe. I have included:

    1 OR LabVIEW Run-Time Engine 2012 SP1

    2 NOR-DAQmx Base Runtime 9.6.2

    3 NOR-DAQmx Configuration MAX 9.6.2 Support

    The computer I did the VI is a Windows XP computer. The computer I want to run the installer is a freshly installed Windows 7 machine. When I try to run the installer, I get the following error:

    Missing Subvi DAQmx create Task.vi... lack of sub - VI DAQmx create channel (TEDS-A1-tension-Basic) .vi.... Missing Timing VI (sample clock)... Missing control task.VI... Missing clear task.VI... Task.VI stop missing... Lack of function external nilvaiu.*AQReadNChanNSamp1DWfm:C...

    Looks like I'm missing VI DAQmx, yet I've included DAQmx in installer.

    Thank you.

    I know this sounds like a stupid question, but have you run set - up.exe volume? You can open MAX on the target machine?  If Yes, what are the software components are listed?  Did restart you to complete the installation?

    My 8-Ball is screaming that this is a simple mistake that will involve a time .

  • run missing files rundll32.exe missing. Unable to open many programs

    Infection Trojan horse on Sunday, McAfee detected and removed on Monday.  run missing files missing rundll32.exe can't open most of the programs without having to 'open with' quick screen.  Have tried the solutions to similar problems, without success.  Cannot use the restore system or clickfree. AM running xp service pack 3, any suggestions?

    He hides on your part.

    The dllcache folder is a hidden system folder (normally).

    The dllcache folder is where XP keeps copies of important system files.  Windows file protection monitors these files when your system is working and if it happen never disappeared, PAM quickly and quietly replace it using the copy in the dllcache folder - this is why you put the rundll32.exe file in both places...  One in the dllcache folder is the backup.

    If you want to use Windows search, you need to go to the Advanced Options section and select the search system folders and enable folders and files hidden research.

    If you use Solution Explorer, while you're looking in the c:\windows\system32 folder, you must:

    Click on tools
    Click on the folder view tab Options
    Enable: Display the hidden files and folders
    Disable (uncheck): Hide extensions of known file types
    Disable (uncheck): Hide protected operating system files

    Then, you'll be able to find and navigate in the dllcache folder.

    When you are finished, you can set your options to view back the way they were then you don't have an accident one day in one of these folders.

  • Windows cannot find c:\windows\system32\rundll32.exe Missing entry: runDLLEntry

    Found 14 windows boxes are open and running in the background that rather slows down the operation of the computer.  Not sure if above the entrance that comes up when I go to the line is the cause.   Help

    Go to the control panel
    Folder options
    View tab
    Highlight: uncheck "Hide protected operating system files" and click on apply, click OK

    Go to the menu 'start '. Click on 'my computer '.
    Double-click the disk "C:".
    Double-click the "Windows" folder
    Double-click on the "System 32" folder.
    Double-click the "Dllcache" folder
    Locate the Rundll32.exe file, right-click on it and select "copy".
    Click on the 'Back' button in Windows Explorer to return to the "System 32" folder.
    Right-click any open space, and then click "Paste".

    Back to: check "Hide protected operating system files" and click on apply, click OK

    If rundll32.exe is not in the dllcache folder do the following:

    Press the Windows Logo keys and run R to open the control box.
    Type: sfc/scannow and click OK.  (there is a space between c and /)
    Insert the operating system CD when you are prompted.
    Windows will replace any missing files.

    Return to the dllcache file rundll32.exe should now be there, copy it, then paste it into

    the "System 32" folder.

  • File rundll32.exe missing

    Hello!  My problem is that whenever I turn on my computer, I get the error message saying that the file c:windows\system32\rundll32.exe is missing... while booting and I get an error popup saying my firewall prot. is turned off... my automatic updates is OFF... it's just a waste.

    I bought my BB laptop and Windows XP was already installed so I don't have a CD available.  Is there another way? Please email VERY much appreciated! Thank you

    I have two solutions for this:

    1 - C:\Windows\System32 if you can't find rundll32.exe go to C:\Windows\winsxs

    and search for rundll32.exe if found copy in C:\Windows\System32

    Note: display of file Extensions must be enabled in the browser, organizing options

    2 - Use another computer with the same version of xp and a flash drive copy C:\Windows\System32\rundll32.exe in the other computer to C:\Windows\System32 in your computer

  • Application of C:\Windows\system32\rundll32.exe missing on Vista Home premium computer

    C:\Windows\system32\rundll32.exe Application missing - this is the error I get trying to start programs from the start menu. Also, I get errors on the .exe files in the control panel. I can't pull up in my sound options to change the speakers to the headphones, it affects everything. I have the rundll32.exe file but for some reason it isn't let me pull up anything. I can pull some things as an administrator. Most of the programs will shoot to the top of the window 'Open with' and I don't really know what opens to some things, like the sound options window. What is the cause? And how can I solve this problem?

    Hello

    If you get the rundll32 error:

    What is rundll32.exe and why it works?
    http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

    What is the suspicious Rundll32.exe process?
    http://WindowsXP.MVPs.org/Rundll32.htm

    -----------------------------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search - find top COMMAND - made box an CLICK RIGHT-
    RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
    turn it back on.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------

    If no joy trying to determine what is the cause:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes without doing anything - then right
    Click on taskbar - task manager - take a look at stored by - Services - process - this
    is a quick reference (if you have a small box at the bottom left - show for all users, to consult
    that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see who are loading is method 2 - using MSCONFIG then after a
    a list of these here.

    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have
    Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
    you who owns each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured so that it starts automatically when your
    system boots and you log in. Autoruns shows you the complete list of files and registry locations
    where applications can configure Auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity in
    in real time.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
    automatically when Windows starts. For each request, the following information
    appears: product Type of startup (registry/Startup folder), Command - Line String,
    Name, file Version, company name, location in the registry or the file system and more.
    It allows you to easily disable or remove unwanted programs that run in your Windows
    startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not.
    The window Watcher says it all, every window created by all programs that are running, the statement
    If the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Winload.exe missing or damaged

    Hello. I was working to clone my disk to a USB HDD (included). I think I can inadvertently done the USB HDD (empty; no OS) a boot disk. Now, I get the "there has been a change in software/hardware to the system; Winload is missing or corrupted"error and does not start for Vista Business. I can get to quick system via the Recovery Console, but it does show X: and doesn't let me change to C:. It does not show me the C: drive for repair. He asked drivers and try to give him the HARD disk driver, but he doesn't. Any chance to recover from this mess? All orders to make him watch C:? Thanks for your suggestions in advance.

    Resourceful salvation,

    This error occurs when one of the following conditions is true:

    (a) entry Windows Boot Manager (Bootmgr) is not present in the Boot Configuration data (BCD) store.

    (b) the Boot\BCD file on the active partition is damaged or missing.

    You can rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    (a) put the Windows Vista installation disc or Windows 7 in the disk drive, and then start the computer.

    (b) press a key when you are prompted.

    (c) select a language, a time, a currency, a keyboard or an input method, and then click Next.

    (d) click on repair your computer.

    (e) click the operating system you want to repair, and then click Next.

    (f) in the System Recovery Options dialog box, click command prompt.

    (g) type BOOTREC /REBUILDBCD , and then press ENTER.

    If the command success, please close the command prompt window and restart the computer

    The article below about how to rebuild the Winload.exe. It applies to Windows 7:

    http://support.Microsoft.com/kb/927392

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • RDPCLIP. EXE missing startup file (system32 dir). Unable to restore the system because of missing file unspecified.

    Windows 7 (new machine, not updated). Autoruns shows this file RDPCLIP. EXE be found at startup. This file is usually located in the System32folder. Unable to restore the system of time earlier because of unspecified missing file (rdpclip.exe?). System seems to be runnuing normally except these two questions. Occasional freezes (once just by renaming the downloads folder). How can I get
    new file restored to the version of Windows 7?

    Note: CLIP.exe is in the System32 directory.

    Hi bigdome6984,

    If your machine acts as a Terminal Server, i.e. someone else connects to your computer using remote desktop, then rdpclip.exe will be loaded on your computer as part of the functionality of Server Terminal Server.

    RDSCLIP is loaded on the computer, allowing other machines to connect via Remote Desktop.

    It should be found at the following registry location:

    HKLM\SYSTEM\CurrentControlset\Control\Terminal Server\Wds\rdpwd\StartupPrograms

    Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows
    http://support.Microsoft.com/kb/322756

    I hope this helps!

    Kind regards
    Gokul - Microsoft Support

  • I can't isntall Silverlight_x64.exe, missing Silverlight_x64.msi?

    Hello

    Just that I have had this problem for some time and finally, I would like to solve it.

    How can I get the file Silverlight.msi to install Silverlight_x64.exe?

    When I run Silverlight_x64.exe it repeat to myself that the Silverlight.msi file is missing.

    I tried Microsoft fix it tools to install/uninstall and Silverlight does not even appear in the options.

    So, what can I do to make this work? How can I modify the Silverlight once and for all!

    Thank you.

    John

    This problem is solved. I found a Microsoft Fixit here:

    Silverlight.msi missing file?

    I applied it and walla Silverlight is updated.

    (Windows Media Center still play Netflix though?)

  • Windows 7 - > 8 - > 8.1 Upgrade winload.exe missing 0xc0000098 error after upgrade

    Hi all

    I have a Windows 7 Enterprise system that I've successfully upgraded to Windows 8 business. Next step must now go to Enterprise 8.1. The whole idea was to avoid the re-setup and well with Windows 8.
    The problem is that when I switch to Windows 8.1 it installs then boots. During the startup, it stops with an error winload.exe is missing for corruption. Code 0xc0000098. All of the keys in the same message results accept the option to boot another OS (F9 I think). It starts in Windows 8 and said he couldn't install 8.1 and that 8 has been restored. Of course, everything is back like nothing happened.
    If this can help:
    The system is a Dell XPS 15 with the eSATA Intel and an SSD.
    Thank you!

    Hello Vijay,

    Thanks for the reply. I do not end up understanding.

    For the benefit of third parties:

    Curiously, the ISO was corrupted. I say strangely because the ISO could be unpacked and burned on a DVD without errors. On a hunch, that I downloaded the ISO again, extract and it worked very well.

    Thank you

Maybe you are looking for