VI running without white arrow

Similar Questions

• If click the white arrow to run vi, is compiled beforehand vi?

  I have this vague idea that compile LabVIEW means something like the compilation in c; compilation only occurs when you want to build the exe.

  And when you click on the white arrow run button in a Labview vi. The vi will be sorta like VB in interpreted mode.

  But however DRESSED review model, I saw this question on Labview know the data type of the strict definition of type at compile time. This seems to suggest that whenever you run the vi, Labview compiles the first vi. Compilation happens only when you want to compile the exe vi.

  While it is true?

  A normal compiler performs different steps during compilation. Pre-treatment, check the syntax, compilation and the actual link is more or less done only once after tell you him to do.

  LabVIEW split this. Syntax checking is a continuous process while you change influence LabVIEW vis. anything not valid causes errors like broken right during the time of change. Once you press the button run LabVIEW can simply take the diagram and compile into machine code, which is normally so fast that you don't even notice it. When you save a disk LabVIEW VI takes the compiled machine code or creates it if it has not been done so far and he recorded with the VI on the disk. Loading the VI the next time the machine code is already there, at least if you are loading the VI on the same platform and version of LabVIEW.

  If LabVIEW ALWAYS executes the compiled code, regardless of whether you run the VI in the development environment or in an executable file.

  Strengthening enforcement is really mostly just take all the parts already compiled and put them in one place, stripping anything useless such as diagrams and also signs of façade that is never visible. This is of course a simplification very strong, but for the purpose of
  This valuable discussion.

• white arrow in the files of the executable

  Hello everyone!

  I have problem creating executables. I want the files does not start to run until the user do not write parameters. So I want that the user could fillful some fields and when it ends, he could start the program using the white arrow (as when you run using Labview).

  When I create a file I deselect the option to "run when it starts", and I get the white arrow in the executable façade. However, I try to do the same thing with the other files and I am not able. SB. explain to me what are the steps I must take to allow control of the execution user?

  Thank you!

  You could always run the VI to start, as it is by default and additional code to make the user can control execution:

  You can check the values of the fields to make sure that they have been modified, when they all have, run the code.

  You may have a ' start' button on your front panel which would be conditional for a while loop to the beginning of your code

  You could use a structure of the event and only run code when the user pressed a button of some or certain a field has changed.

• Blue square icon with 2 White arrows attached to the photos transferred from the digital camera

  All uploaded photos from digital camera to the windows7 picture library have a blue square icon with 2 White arrows ">" attached to each picture in the lower left corner. How do I overcome this?

  All uploaded photos from digital camera to the windows7 picture library have a blue square icon with 2 White arrows ">" attached to each picture in the lower left corner. How do I overcome this?

  =========================================
  If you are running Norton 360... the following article is maybe worth a visit:

  Green checkmark or icon collection blue arrows displayed files in Windows
  Explorer:
  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

  If you do not need the backup indicators feature you can turn off by
  by clicking settings in the main window of Norton 360, disable the backup
  Status indicators check box and click Close.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Snapshot without green arrow

  The Snapshot Manager show me a snapshot without green arrow?

  The Machine is running

  Can I remove this snapshot without problems?

  

  

  Concerning

  Markus

  No problem

  don't forget to set the question as answered

  Thank you

  Manlio

• Very recently, whenever I run Firefox, an arrow appears, pointing down and disappears to the top of the screen

  Recently, whenever I run Firefox, an arrow appears, pointing down and quickly disappears to the top of the screen. I'm not trying to download something, it is whenever I run Firefox. At first I thought I was seeing things, but verified by concentrating just to catch, it appear and disappear. See no reason for this. I use Firefox for years and it's never happened before. Furthermore, it does not appear on my IE browser.

  Never mind. I found the problem and it was a program that was trying to download it, but couldn't all the time. I removed from the Firefox download page.

  Status: solved!

• Development of applications that run without installed DAQmx

  We want to develop the executables that include optional calls to connected DAQmx hardware.  It will be used for purposes of internal development and allocation of customers. We would like to include optional features such as temperature logging using the thermocouple NI 9211/USB-9162 entry-level camera.  If a customer wants to use our application with record temperature, they can buy the necessary materials of NEITHER and install DAQmx drivers.

  The problem we are trying to solve is how to develop applications that work also for the case when a client does not want to buy the material and does not install the DAQmx drivers.  Ideally, we can include a button 'disable temperature logging' on relevant applications, which prevents all calls to the DAQmx drivers at run time.  For example by including calls in a business controlled by this button structure.

  The problem we seem to have is that executables resulting always require customers to install the DAQmx drivers, even if they don't need them.  It doesn't seem to be a way to make the optional installation, since the source screw included calls to DAQmx drivers, even if they will not be used by the customer.

  Clearly, a solution is to develop two families of screws and the applications, which include DAQmx calls and one who is not.  However, which will result in a horrible collection of code that will require the maintenance and parallel development.

  An alternative is to ask all customers to install DAQmx drivers.  Unfortunately, the size and complexity of downloads that results will be a significant deterrant.  It's already a shame that our distributed software is a 50 MB download, when the size of the code in C++ or VB would be less than a tenth of that.  Another factor of increase of 10 download is prohibitive.

  We must find a solution more clean.  All ideas, plase?

  We are currently with LabVIEW 8.5.1 and DAQmx 8.9.

  You can use the conditional structure conditional symbols and disable disable in the project to do. You can, for example, have a symbol called "HAVEDAQMX" and, say, use a 1 or 0 (or anything you want) to indicate that you want to run the project with or without DAQmx. In VI using the conditional turn off the structure. For HAVEDAQMX = 0 case put in the code to run without DAQmx. For HAVEDAQMX = 1 case put in the DAQmx code. When you build the application, if any will get used, and the other will be thrown.

  Attached is a simple project that does this. You can view the LabVIEW help for more information about the conditional structure disable.

• How to schedule tasks running without deleting?

  Today is holiday, but scheduled task does not, someone has suggestions on how to stop schedule tasks running without deleting?

  Thanks in advance for your suggestions

  Try to open the "Task Scheduler" in the control panel... Or, select run, type: services.msc

  MSC, locate the service, double-click "manual start" the value of autostart.

  close when through...

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Original title: Max the mouse

  I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP.  It was simple, little grey mouse that has nibbled cheese if the program was busy.  Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

  Thank you, Mr. Singh. That did not help.  But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

• popupscreen without white screen

  

  wondering how to make it only to see the popupscreen without white screen on the back?

  I'm using pushScreen (new MypopupScreen());

  When I click the icon on the home screen, I want to show only popupscreen.

  How do I do that?

  This code is used to push a global screen from an Application without user interface:

  Ui.getUiEngine () .pushGlobalScreen (popupScreen, 1, UiEngine.GLOBAL_QUEUE);

• Windows 8 does not read DVD but CD runs without any problem

  Original title - I habe upgrade to windows 8 way back but my DVD player does not read DVD but CD runs without any problem

  DVD stalk does not read DVDs but reading the CD with no problems. Even in my computer drive shows as CD drive type.

  Hi Rohan,

  I suggest you try the steps suggested by AtishayMSFT dated dated March 6, 2012 at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/hardware/DVD-drive-not-recognized-in-Windows-8/ad546c20-b916-4AD5-9858-52e10610ee14

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• the system show my VM was running without any snapshots, but there are several delta files in data stores.

  Hello

  The system displays my VM was running without any snapshots, but in the data store, there are several delta as vmsd files, delta.vmdk files exist.

  
  

  is it possible to get rid of these files of delta file. Screenshot of PFA

  
  

  
  

  Thank you

  vm2015
  

  
  

  
  

  Create another cliché, and then use the option "Delete All" to delete all snapshots.

  That get rid of the files?

• Hi, I have cs6, indesign, and I can't use the black and the white arrow. I just bought the cs6. can someone please tell me what I did wrong. Thank you, alexandra

  Hi, I have cs6, indesign, and I can't use the black and the white arrow. I just bought the cs6. can someone please tell me what I did wrong. Thank you, alexandra

  https://helpx.Adobe.com/InDesign/KB/InDesign-tools-panels-Don ' t - respond.html

• If I run my query in Oracle, it runs without error, but when I run inside c# gives ORA-00911: invalid character

  I like to run below myQuery in c#, but saw the error. No idea what is the problem? If I'm running myQuery in Oracle, it runs without error. "I put all the +" before starting the myQuery line and "end of the line. but nothing changes.

  myQuery =

  with the CBC as

  (

  Select src.table_name src_table_name, src.column_name src_col_name, src.data_type src_data_type, src.data_length src_data_len, src.data_precision src_data_precision, src.data_scale src_data_scale,

  CBC. Nullable src_nullable, decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as src_cons

  all_tab_columns CBC

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = Src.Column_Name

  where table_name = 'INSTRUCTOR' and owner = "ERHAN"

  ),

  As TGT

  (

  Select tgt.table_name tgt_table_name, tgt.column_name tgt_col_name, tgt.data_type tgt_data_type, tgt.data_length tgt_data_len,

  TGT.data_precision tgt_data_precision, tgt.data_scale tgt_data_scale, tgt.nullable tgt_nullable,

  Decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as tgt_cons

  from all_tab_columns tgt

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = TGT. Column_Name

  where table_name = 'INSTRUCTOR' and owner = "SARIGUL"

  ),

  col_details as

  (

  Select src.src_table_name, nvl (tgt.tgt_table_name, first_value (tgt_table_name) more (order of nulls last tgt_table_name)) tgt_table_name;

  SRC.src_col_name, src.src_data_type, src.src_data_len, src.src_data_precision, src.src_data_scale, src.src_nullable, src_cons,

  TGT.tgt_col_name, tgt.tgt_data_type, tgt.tgt_data_len, tgt.tgt_data_precision, tgt.tgt_data_scale, tgt.tgt_nullable, tgt_cons

  the CBC

  outer join full tgt

  on)

  SRC.src_col_name = tgt.tgt_col_name

  )

  )

  Select *.

  de)

  Select the case sensitive option

  When tgt_data_type! = src_data_type or tgt_data_len! = src_data_len or tgt_data_precision! = src_data_precision or tgt_data_scale! = src_data_scale or tgt_nullable! = src_nullable

  then 'alter table ' | tgt_table_name | 'Edit ' | tgt_col_name | ' ' || src_data_type | ' ' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then ' (' |) NVL (to_char (src_data_len), ' ') | ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  ||

  cases where tgt_nullable = 'Y' then 'null '.

  of another end 'not null '.

  || tgt_cons

  When tgt_col_name is null

  then 'alter table ' | tgt_table_name | 'Add ' | src_col_name | ' ' ||  ' ' || ' ' || src_data_type | ' ' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then ' ('| nvl (to_char (src_data_len), ' ') |) ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  || tgt_cons

  When src_col_name is null

  then 'alter table' | tgt_table_name: ' drop '. tgt_col_name

  end alter_statement

  of col_details

  )

  where alter_statement is not null;

  using (OracleConnection conn1 = new OracleConnection (connectionString))

  {

  conn1. Open();

  Dim myQuery = "";

  using (OracleCommand = new OracleCommand (myQuery, conn1) crtCommand)

  {

  richTextBox1.AppendText (output);

  richTextBox1.AppendText (crtCommand.ExecuteNonQuery (). (ToString());

  richTextBox1.AppendText (output);

  }

  }

  VR;

  myQuery=
  @"with src as
  (
  ...
  ";
  

  That means a @ before the beginning of a string literal mean? -C# Foire - Site Home - MSDN Articles

  as an example

  OracleCommand cmd = con.CreateCommand();
  cmd.CommandText = @"begin apps.mo_global.init('SQLAP'); begin apps.fnd_global.apps_initialize(5710, 20639, 200); end; end;";
  cmd.ExecuteNonQuery();
  

  richTextBox1.AppendText (crtCommand.ExecuteNonQuery (). (ToString());                            

  is this correct? Not sure

  as example try

   using (OracleConnection conn1 = new OracleConnection(connectionString))
  {
      conn1.Open();
  
      string myQuery = "......";                  
  
      using (OracleCommand crtCommand = new OracleCommand(myQuery, conn1))
          {
              richTextBox1.AppendText(Environment.NewLine);
              // richTextBox1.AppendText(crtCommand.ExecuteNonQuery().ToString());
  
  OracleDataReader reader = crtCommand.ExecuteReader();
  while (reader.Read())
    {
      richTextBox1.AppendText(reader.GetString(0));
      // may be also
      // richTextBox1.AppendText(Environment.NewLine);
    }
  
              richTextBox1.AppendText(Environment.NewLine);
  
          reader.Dispose();
          cmd.Dispose();
          }
  
      con.Dispose();
  }