Vibration on alarm does not not with saving on the marshmallow battery function

Similar Questions

• Satellite Pro S300-120 does not start after replacing the CMOS battery

  Hello

  My friends laptop - a S300-120 - was having a few problems.

  I replaced some parts about this before, including a screen crack with no problems.

  However, he began to refuse to start saying "out of battery CMOS, Press F1 to enter setup". Of course you would have to do this, set the date and time, except & restart only to get the same message. We have replaced the CMOS battery with a with the same serial number and now the laptop will not boot.

  It does one of two things.

  It is one) seems to turn, turn to the top disk & CD player, cooling fan is 100%, then flashes the POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.

  Or (b) turns on, turntable, does not turn up to cooling fan, POWER ON witness remains stable, no response from the keyboard or LCD.

  I re-assembled the laptop several times & can not find all the missing fittings or obvious signs of damage.

  The only thing I can think is that the motherboard has been damaged - somehow find replacements is delicate.

  Any ideas?

  Hello

  (> It is a) appears to turn on, turn the disk & CD player, cooling fan goes to 100% and then flashes him

  POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
  Usually, if the voltage in abnormal feeding malfunctions when IN DC will be blinking orange.

  In my opinion, it looks like a problem with the motherboard :(
  Eventually, you will need to replace the mobo ;(

• OptiPlex 755 USFF does not start after changing the cmos battery

  I have a desktop Optiplex 755 USFF requiring the cmos battery to replace. After the replacement of the computer will not start. It brings up the menu windows start, the sasfe mode, safe mode with network set mode command prompt, security, last know good configuration and boot normally. Any option will bring to the top of the WIndows XP loading screen and then re-boot of the computer right back to the start screen. A big loop. I can get the hard drive to boot in an Optiplex GX280 without problem. I was told of the motherboard needs to be replaced, but I changed the units of the system and the same thing with this hard drive.

  I tried to reinstall the operating system and get all the way to "starting windows" and then the blue screen stop error message 0x0000007B (0xF7A10524, 0xC0000034, 0x00000000, 0x00000000) dead. The computer is WIndows XP SP3, 1 GB of ram with 80 GB hard drive. It seems that the Setup program does not recognize the hard drive.

  Any help would be appreciated.

  After several hours of experimentation, I finally found the correct BIOS settings in order to get the computer to boot. There are three BIOS settings that need to be changed or check settings by default so that it can work. SATA 0 must be activated, SATA operations must be changed from AHCI, ATA and in the modular Bay, by default "far-sighted" should be replaced by the IDE. Save the settings and start the computer to the right upwards.

• Does not start after replacing the cmos battery

  HP m8430f, Vista Home Premium.  Worked very well but sometimes had to restart using "pulsed" F10 (5 seconds) then wait 5 seconds, and then F5, then ENTER, F10, then ENTER.

  I suspected the CMOS battery, so I removed it.  He tested "fair."  Got a new CR2032.  He attached the test counter, so it's okay  "I WAITED ALL NIGHT BEFORE REPLACING.  But the computer does not restart.  I went through the steps above and still no luck.  What to do next?  Thank you, Joe

  FIXED!  I removed the battery (I had to remove the sound card to get in the first place to the battery).  I waved it around a little when you reinstall.  Now it's working.  What I've done, I have no idea, but it works now.  Sorry for the post, but I was desperate.  Joe

• Windows 7 does not update after changing the BIOS battery

  I recently changed the BIOS battery for my desktop which runs on Windows 7. Even after that windows 7 is not able to update.

  Windows Update checks the updates forever!

  

  the action center has this message:

  

  and the history of the update is like that...

  

  I also tried the tool micrsoft 'Fix it '. It was of no use. Windows Update stopped for checking updates and gave the error: "80072f8f.

  Can someone please help to fix this error, this will also allow me to upgrade to Windows 10!

  Thank you.

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Full updates to reset Windows

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• Measurement and Automation does not open and generates the MAXKnownException error with an unknown exception.

  Measurement & Automation does not open and generates the MAXKnownException error with an unknown exception.

  Heres the log

  Context where the exception was taken:
  (No context - the unhandled exception)

  Size version of Base module
  -------------------- -------- -------- ------------------
  NIMax.exe 00400000 0006 has 000 4.6.0.49152
  ntdll.dll 770E0000 00180000 6.1.7601.18247
  00110000-76060000 6.1.7601.18409 Kernel32.dll
  KERNELBASE.dll 74E00000 00047000 6.1.7601.18409
  SYSFER. 74830000 00072000 12.1.1101.401 DLL
  1BFB0000 0001 NiMaxImp.dll B 000 4.6.0.49152
  Shell32.dll 74E50000 00C4A000 6.1.7601.18429
  Msvcrt.dll 76830000 000AC000 7.0.7601.17744
  74 00000 00057000 6.1.7601.17514 SHLWAPI.dll
  76740000 00090000 6.1.7601.18275 Gdi32.dll
  00100000 76480000 6.1.7601.17514 User32.dll
  Advapi32.dll 75DD0000 000 A 0000 6.1.7601.18247
  sechost.dll 76CC0000 00019000 6.1.7600.16385
  000F0000 rpcrt4.dll 76980000 6.1.7601.18205
  SspiCli.dll 74AE0000 00060000 6.1.7601.18443
  CRYPTBASE.dll 74AD0000 0000 C 000 6.1.7600.16385
  LPK.dll 76470000 0000 has 000 6.1.7601.18177
  USP10.dll 768E0000 0009D 000 1.626.7601.18454
  Ole32.dll 75F00000 0015C 000 6.1.7601.17514
  Msvcp90.dll 739F0000 0008E000 9.0.30729.6161
  Msvcr90.dll 73DB0000 000 has 3000 9.0.30729.6161
  74470000 00009000 6.1.7600.16385 VERSION.dll
  IMM32. 00060000 60000 74 6.1.7601.17514 DLL
  000CC000 76BB0000 MSCTF.dll 6.1.7600.16385
  74320000 00021000 6.1.7600.16385 Ntmarta.dll
  Wldap32.dll 00045000 763E0000 6.1.7601.17514
  Uxtheme.dll 6EB20000 00080000 6.1.7600.16385
  NiMaxUI.dll 1C2D0000 00269000 4.6.0.49153
  Msvfw32.dll 6BE30000 00021000 6.1.7601.17514
  73970000 00032000 6.1.7601.17514 WINMM.dll
  Comctl32.dll 73E80000 0019E000 6.10.7601.17514
  Wsock32.dll 73DA0000 00007000 6.1.7600.16385
  74DC0000 00035000 WS2_32.dll 6.1.7601.17514
  NSI.dll 75AA0000 00006000 6.1.7600.16385
  Oleaut32.dll 76580000 0008F000 6.1.7601.17676
  6D8E0000 003 Mfc90u.dll has 1000 9.0.30729.6161
  MSIMG32.dll 6EBA0000 00005000 6.1.7600.16385
  dwmapi.dll 6EB00000 00013000 6.1.7600.16385
  MFC90ENU. DLL 6EAF0000 0000 D 000 9.0.30729.6161
  NiMaxRes.dll 1BFD0000 0007 has 000 4.6.0.49153
  BtMmHook.dll 10000000 00038000 6.4.0.2900
  PSAPI. DLL 76440000 00005000 6.1.7600.16385
  DCIMAN32. DLL 6E1F0000 00006000 6.1.7601.18177
  MXS.dll 1 B 240000 4.6.0.49152 0000F000
  mxsutils.dll 1B4D0000 00041000 4.6.0.49152
  Msvcp71.dll 7C3C0000 0007C 000 7.10.6030.0
  7 360000 00056000 7.10.6030.0 Msvcr71.dll
  mxsout.dll 1 B 400000 00075000 4.6.0.49152
  64600000 00014000 4.257.3.0 nirpc.dll
  Mswsock.dll 73A 90000 0003C 000 6.1.7601.18254
  profapi.dll 76460000 0000B 000 6.1.7600.16385
  mxMax.dll 1BF20000 00086000 4.6.0.49152
  58000000 00240000 6.5.0.3005 AsstntUI.mxx
  MFC80U. DLL 71210000 8.0.50727.6195 0010F000
  MSVCR80.dll 0009B 000 8.0.50727.6195 72E50000
  Comdlg32.dll 20000 75 0007B 000 6.1.7601.17514
  71180000 00087000 8.0.50727.6195 Msvcp80.dll
  ATL80. DLL 6BD70000 0001 B 000 8.0.50727.6195
  MFC80ENU. DLL 730F0000 8.0.50727.6195 0000E000
  59000000 00582000 6.5.0.3005 mxwTask.dll
  00011000 74180000 6.1.7601.17887 Netapi32.dll
  74170000 00009000 6.1.7601.17514 netutils.dll
  74150000 00019000 6.1.7601.17514 srvcli.dll
  wkscli.dll 74140000 6.1.7601.17514 0000F000
  56000000 00148000 6.5.0.3005 mxwRCEng.dll
  mxcal.mXX 1 A 110000 00056000 4.6.0.49152
  mxcat.mXX 1BE20000 000AB000 4.6.0.49152
  nidmfuiu.mXX 04360000 0010D 000 1.11.0.49152
  NIPALU.dll 64000000 00057000 2.1025.3.0
  64500000 00006000 2.1025.3.0 nipalut.dll
  NIPAL32.dll 00007000 1F700000 2.1025.3.0
  SETUPAPI.dll 76240000 0019D 000 6.1.7601.17514
  CFGMGR32.dll 75DA0000 00027000 6.1.7601.17621
  76220000 00012000 6.1.7601.17621 DEVOBJ.dll
  6 280000 00031000 1.9.0.49152 nimdbgu.dll
  6 000000 00017000 1.9.3.49152 niorbu.dll
  nimstsu.dll 6E180000 0001 has 000 1.11.0.49152
  nimhwcfu.dll 6DFD0000 000 B 6000 1.11.0.49152
  6 050000 0001E000 1.9.0.49152 nidimu.dll
  nimxdfu.dll 0003E000 1.10.0.49152 6D0F0000
  nimxpu.dll 6E1B0000 0000 000 1.11.0.49152 B
  Iphlpapi.dll 74280000 0001C 000 6.1.7601.17514
  WINNSI. DLL 74270000 00007000 6.1.7600.16385
  74B 40000 001BD000 11.0.9600.17126 WININET.dll
  76A 70000 API-MS-Win-Downlevel-User32-L1-1-0.dll 00004000 6.2.9200.16492
  770B 0000 API-MS-Win-Downlevel-shlwapi-L1-1-0.dll 00004000 6.2.9200.16492
  75AB0000 API-MS-Win-Downlevel-Version-L1-1-0.dll 00004000 6.2.9200.16492
  76430000 00003000 6.2.9200.16492 API-MS-Win-Downlevel-normaliz-L1-1-0.dll
  normaliz. DLL 76450000 00003000 6.1.7600.16385
  iertutil.dll 75AC0000 00219000 11.0.9600.17126
  76610000 00005000 6.2.9200.16492 API-MS-Win-Downlevel-advapi32-L1-1-0.dll
  76200000 00017000 6.1.7601.17514 USERENV.dll
  nidmxfu.dll 04470000 0049F000 1.12.0.49152
  nimru2u.dll 6EC70000 00044000 2.10.1.49152
  nimmgluu.dll 69830000 0001E000 1.11.0.49152
  nimercu.dll 6DFB0000 00019000 1.11.0.49152
  MFC71. 00106000 140000 7 7.10.6101.0 DLL
  MFC71ENU. 360000 5 0000E000 7.10.3077.0 DLL
  niGPIBui.mxx B 6, 000000 0008E000 2.7.0.49152
  niIVIui.mxx 02CE0000 000D 0000 4.2.0.49152
  niPXIui.mxx A 671 0000 000BC000 2.1280.1.49152
  niRemPXI.mxx 1 A 270000 00057000 4.6.0.49152
  mxRmCfg.dll 1 has 000000 00090000 4.6.0.49152
  niRMui.mxx 1AD70000 000FD000 4.6.0.49152
  NISRLUI.mxx 6B 500000 00061000 3.4.0.49154
  63800000 00010000 2.7.0.49152 NiSpyLog.dll
  niSWui.mxx 1A3B0000 00072000 4.6.0.49152
  niVISAui.mxx 63360000 0017D 000 4.1280.0.49152
  62 30000 0002E000 4.1280.0.49152 niVISAres2.dll
  RICHED32. DLL 40000 00006000 6.1.7601.17514 6FC
  Riched20.dll 61F70000 00076000 5.31.23.1230
  Wshtcpip.dll 73A 80000 00005000 6.1.7600.16385
  nisysapi.dll 68 has 00000-000B 2000 5.5.2.49152
  Dbghelp.dll 70F20000 000EB000 6.1.7601.17514
  -------------------- -------- -------- ------------------

  Application: C:\Program Files (x 86) \National Instruments\MAX\NIMax.exe
  User name: administrator
  OS version: 6.1.7601 (Service Pack 1)
  Exception code: C06D007E
  Exception addr: 74E0C42D

  Sender's address: 74E0C42D
  Function name: RaiseException
  Module name: KERNELBASE
  Parameters: 00000000 00000001 0518FD84 C06D007E
  Source file: (not available)

  Sender's address: 68A3C6F7
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000000 0518FD50 005F59B8 0000001E
  Source file: (not available)

  Sender's address: 68A53D87
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000350 68A791B8 005F59B8 00000000
  Source file: (not available)

  Sender's address: 68A0DC65
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 68A 01680 00000001 68A93BB8 FFFFFF01
  Source file: (not available)

  Sender's address: 68A0DFC4
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 68A 01698
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 1BE27A73
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 020469F0 02047084 0518FED0 1BE76CBA
  Source file: (not available)

  Sender's address: 1BE30D2E
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 02029FA8 02047748 0518FF34 1BE21D4C
  Source file: (not available)

  Sender's address: 1BE35780
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 00000000 00000000 02047818 020469F0
  Source file: (not available)

  Sender's address: 1BE21D4C
  Function name: (not available)
  Module name: mxcat
  Parameters: 02029FA8 1BE6264D 0518FF7C 73DD3433
  Source file: (not available)

  Sender's address: 1BE21CDC
  Function name: (not available)
  Module name: mxcat
  Parameters: 02030018 00000000 00000000 9192C45C
  Source file: (not available)

  Sender's address: 73DD3433
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 00000000 0518FF94 7607338A 02047818
  Source file: (not available)

  Sender's address: 73DD34C7
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 02047818 0518FFD4 77119F72 02047818
  Source file: (not available)

  Sender's address: 7607338A
  Function name: BaseThreadInitThunk
  Name of the module: kernel32
  Parameters: 02047818 00000000 00000000 775D5D69
  Source file: (not available)

  Sender's address: 77119F72
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  Sender's address: 77119F45
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  If I could come with the OS discs for the thing, I think I'd do a new install of Windows 7.

  Mike...

• Audible alarm does not work

  Hello
  I have a problem in my sony phone, the sound of the alarm does not work what can I please?

  Hi @Marwa95,

  First of all, make sure that the volume of the alarm is enough in settings > Sound & notification.

  If it is and you still get no sound for your alarms then try erasing the data of the application. You can do this if you go to settings > Apps > all > clock > clear data. This will reset the app then try to set a new alarm after having done that and see if it helped.

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• Audio fun does not with animation

  I think it must have something to do with the audio being does not correctly placed on the timeline, but I think I do everything that the directions said. When I put audio in the timeline, it will play the audio from the beginning, but if I stop the audio and try to play a place randomly in the Middle, it won't play anything. How can I fix so the audio will play anywhere in the animation, not only at the beginning?

  If you publish a swf file, use stream to sync the sound, no event property.

• I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I had the same problem - my solution:

  1. If you create a connection to Adobe, make sure that you click the verification link in the email sent to you to verify your account.

  2. I leave the download Assistant, then began the process to download the original page download Assistant - he asked if I wanted to run the already downloaded version, which I chose.

  3. once the download wizard opens again, I logged in using my newly created connection and then, he showed the free trial in the product list (it has not been listed as free, but it was).

  My download is happening now - about 1 hour to go.

• By pressing the home button does not take me to the home screen of iOS 9.3.3

  I have recenly updated upgraded to iOS 9.3.3 and I noticed that pressing the home button does not take me to the home screen. The only way to get there is by using the creature of multitasking. (double pressing the home button) Also, some applications seem to freeze if turn my phone off and then turn it back on, or when I access it via the multitasking function. Can someone please help?

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• Corsair POWER supply update does not post, powers of the powers of 5 seconds down and loops...

  Have the HP Pavilion Elite m9650f with motherboard replaced in April 2012 class good to go.

  Replaced the stock GPU Nvidia GeForce 9800 GT with a Zotac GTX 560 Ti GPU and

  the stock HP 460 Watt power supply with a W0388RU Thermaltake TR2 600 Watt PSU in may 2012.

  All goes well until October 2012.

  PC randomly starts shutting itself off the coast and not feed until I have unplug the power cord and wait 5-10 minutes.

  Finally, he stopped turning on all together.  Reinstall all power PSU connectors, etc.  same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstall the stock HP 460 Watt PSU, now everything works fine.

  Thought it was a premature failure of Thermaltake PSU.

  Bought and installed a Corsair CMPSU - 850TXV2 850 Watt power supply for a few days but still not good to go.

  Lights, fans spin, but no MESSAGE, no video, tracks for all

  5 seconds, stops, turns on itself over and over again.

  Reinstall all power PSU connectors, etc. same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstalled the HP PSU stock, now everything works perfectly again.  ?

  Spends hours reading the forums...

  Some say that the RAM may not report correct voltage for power supply.

  If so, what can I change RAM voltage in the BIOS?

  Others say reset CMOS I did, same result.

  And someone on this forum HP thought that perhaps the Pegatron IPMTB-TK

  Card mother Truckee can only accommodate up to 750 Watts POWER supply.

  Any ideas?

  Can I get away with just using my HP 460 Watt power supply after all stock?

  Thank you.

  I have an additive to add to this topic.

  To refresh, my questions focus on a possible shift of the power supply and card mother specs:

  What is an ATX 12 v 2.0 and above technical problem or a power CAP problem?

  I posted my questions on the Forum of power SUPPLY Corsair PSU

  at the same time and I paste it here now, a response

  to GUY of RAM.

  "Hey RAM GUY."
  
  Sorry I couldn't answer until now.
  
  Please specify the difference between the ATX 2.0 specification and 2.01
  
  Spec that the negative - 5 v Rail is not present in the 2.01 spec and
  
  beyond.  As I mentioned previously, the Thermaltake PSU that has been
  
  running in my 2009, HP i7 tour for 7 last month said 12 volt ATX 2.2
  
  on the case and even if the power supply HP OEM said 12 volt ATX
  
  2.0 in the technical literature, that I found on Google, the real PSU I have does not work
  
  have any note on the case ATX specification.  So I think it's safe to say, my
  
  motherboard does not have the negative Rail v-5 at which he played
  
  nicely with 12 volt ATX 2.2 spec, until recently.
  
  Although theoretically it is supposed to be no limit on the amount of
  
  Absorbed power, you can use to power your motherboard, the motherboard because
  
  is supposed to use only what suits him and cap the rest, it seems that the OEM
  
  can dial up limitations of power if they deem necessary.
  
  Could be as simple HP, without wanting to compete with some of his HPs
  
  Professional workstations, caps so power on some Pavilion Elite
  
  Series models to prevent them from becoming a much cheaper
  
  solution.
  
  In any case, I think that all the available information, digested, he does not speak
  
  Specification of the ATX, but rather my motherboard HP has a limit of 650 Watts of power
  
  If I think that I read that someone else got the same motherboard goes with
  
  750 watts, but I do not remember where to find this announcement. »
  
  I'm back and Yes!
  
  Thanks again Lasvegaswireman!

• Why did I downloaded Firefox 4.0, but I do not have the firefox orange box in the upper left corner of the screen. My screen still looks like the old version of firefox. My screen does not resemble that of the video. nothing like that

  My Firefox 4.0 does not resemble something like the videos you show on the new Firefox features. My screen looks completely different from yours. It doesn't have the orange box in the upper left corner of the screen. My screen still looks like the old version. I have the logo on the top of my screen with ask a Question, a vertical line helps Firefox - Mozilla Firefox.
  Under this heading, I have File, Edit, View, history, Favorites, tools, and help. Below this line is a tab Ask a Question Firefox Help and has +. The screen of my husband looks identical to the orange box of Firefox in the upper left corner of the screen. I wish that my screen look identical to those shown in your videos. I have a version of Firefox 4.0 my husband has the Firefox 4.0 and the beta version. How to add the beta version? I have Windows Vista running systems. Help, please. Thank you

  To get the new interface, you need to hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')