vibration problem

Similar Questions

• Droid Razr vibration problems

  So I would like to know if anyone has the reason why problems of vibration can be recurring.

  I posted on another thread, I'm on my 3rd Droid Razr. My first one I had for almost a year I think. And he started having vibration problems during the update of the "sandwich" of ice cream came. I have not given up. Water spilled on it. Whatever it is.

  . And from what I've seen people say it's the apps. And it did not work when I did the factory reset for an Exchange. No idea if this is so

  When my second stop I went to the verizon store and had them watch. They could not understand why the vibration does not work either. Then they order me a new. I got this 2 days ago. And vibration has stopped working already.

  I wondered if it was sandwich ice cream or a defective hardware. OR if it's my personal fault. Any help would be appreciated

  
  

• Lenovo Vibe P1 Vibration problem

  How can I activate the vibration totally off?

  I don't want to vibrate even when it is completely silent.

  Hello emrekolay,

  Welcome to the forums!

  You can simply enable the "do not disturb" option to disable the vibration that you will find in the notification Panel. You can set a period of time or the option indefinitely according to your convinience.

  Let me know if you face difficulties.

  Kind regards

  Dev

• P1 - vibration problems

  I have a Lenovo P1, the vibration while receiving calls is very low. I don't feel the vibration when the phone is in your pocket. All solutions.

  Comment to Moderator: The model is added to the object for clarity.

  If the phone is faulty, return it to where you bought it or to a Lenovo authorized service center for repair.

• iPhone 6s more vibration problem

  My iPhone 6 s more than 128 GB is barely 2 months old and has been treated with care since the first day. I started to notice this buzzing/clicking sound when the phone is held vertically. The noise varies depending on how I want the phone.

  After some googling I found reports of similar problems on the iPhone 6 Plus.

  I made a video of my problem here: https://www.youtube.com/watch?v=6Kcf1pwBg9w

  Everyone knows the same thing?

  If anyone knows the problem is irrelevant. Polls and surveys are banned by Apple Support communities terms of use.

  It is under warranty. Make an appointment at the genius bar and get it fixed / replaced.

• Vibration of hard disk

  I have vibration problems, which I believe is the hard drive.  Here is my configuration:

  By the end of 2011 Macbook Pro 15 "

  Core i7 2.2 GHz

  12 GB Kingston 1333 MHz DDR3 RAM (4 x 1, 8 x 1)

  128 GB SSD

  Relocated Original 500 GB 5400 RPM hard drive to the optical Bay Via Optibay location.

  Glossy screen

  Intel 3000 512 MB, AMD Radeon HD 6750 M graphics card

  Battery replaced last year.

  Public beta of OSX El Capitan

  Here is the problem.  Just today, I noticed a slight turning sound. The rest of the right Palm has a very slight vibration, leading me to believe that the hard drive is the source, as the optical Bay area is located on the right.  Am I correct in this thinking?

  If so, is it simply a matter of buying a new hard drive?  I can install a very easily.  Is an upgraded agree 7200 RPM, or it will cause vibrations more?

  Thanks in advance.

  What data is on the hard drive running?

  If the disc can be disassembled it and see if the noise stops. / Applications/Utilities/Disk Utility has orders to disassemble the disks. Of course if you store your home folder or files that are in use, you can not take it apart.

  The DSS cannot be vibrant since it has no moving parts. The fan is in the Center, so it could be that, but it is towards the rear of the case. Approach your ear and see what you mean.

  Take a look at iFixit for information on what is inside your Mac. You may be able to reconstruct an idea where to live parts.

  NOTE: vibration can be caused by the poorly mounted disk or lose screws etc. Resonance may cause vibrations get stronger, so it is difficult to guess if a 7200 RPM drive starts to vibrate more. It will use a little more battery.

  https://www.iFixit.com/Guide/MacBook+Pro+15-inch+unibody+late+2011+optical+drive + replacement/7528

• IPad 4th generation a worthy upgrade?

  Hello, I guess the title speaks for itself. I have an iPad 2 and explored a generation IPad 4th instead of one of the most recent Air.  The thinner air worries me a little after reading the reviews on the problems of vibration, but at the same time, I don't want to get something that will be essentially unusable in a year. I mainly use my iPad for navigation, email, youtube, netflix, and some older games. I have my laptop for heavy lifting.  All thoughts and opinions will be greatly appreciated.  Thank you.

  Forget an iPad 4.

  They came out the same year as the iPad 3 and a 4 year old machine, may be rendered obsolete earlier than the most recent models of iPad.

  Get the new iPad 2 air or if you want stronger, better sound quality for music and movies, consider the iPad 9.7 inch Pro.

  If your budget allows, for the iPad 2 Air, Apple is only in charge $100 more for three times the size of the basic storage model of 16 GB which, IMO, is a real bargain!

  Newer models of the iPad don't WILL NOT go unusable or obsolete in a year!

  I don't know where your thinking with this, but Apple will always come out newer, faster, better iDevices each year (just like cars).

  You should get at least another 4-5 years, or more, out of the current range of iPad. NOT FOR A YEAR!

  The only iPad, which took his life cut short/low was the original iPad in 2010.

  The original iPad was only about a year and its iOS has NOT advanced before iOS 5.1.1.

  Vibration problems were not a problem if your put your iPad into a kind of light and protective case.

  So your new iPad AppleCare extended supplementary estimates a 2 years warranty complete Apple for all the problems.

  Good luck and have fun with your new iPad.

  It will be a difference noticeable a lot in performance than an iPad 4 years 4.

• Satellite Pro A120: disk head alignment error is displayed

  I bought an AE120 on 12 Dec 06. It worked when first turning the power on. When I push the cell phone, the "vibration problem" message appeared and followed by "drive head alignment error" what made me afraid to use it more.

  So I returned the computer laptop vendor and bought the model replacement unit exact. The second unit came on 19/01/07. When lights first, the exact situation came and I was not convinced to use this laptop yet, but the second unit to return to the vendor.

  I don't know if these two units came a bad batch and I don't know if I should buy the same unit, the third time and hope that this error would not come to the top.

  Pls advise if it is a fault or a bad batch.

  Hello Belinda

  I am very surprised that your local provider was not able to explain that you want to happen exactly.

  In any case, this message is not serious and there is no reason to worry about this. If your laptop has the factory settings it is preinstalled Toshiba HDD Protection tool. The exact explanation of this tool is as follows:

  HARD drive protection
  Using the acceleration sensor built into the PC, HDD protection detects the vibrations, shocks and sings it similar in the PC and the disk head HARD automatically move to a safe position to reduce the risk of damage that might be caused by the contact of the head-to-disk.
  You can disable this message. Start detail TOSHIBA help protect and difficulty HDD Protection Setup.

  Under HDD protection Message remove check mark in front of a display of message when. option.

  Goodbye and enjoy your new toy. ;)

• Problem with vibrations of the Iphone 5 and SE

  Hello, my name is Alexander, im of the Brazil and I speak very well English. I owned an Iphone 5 purchased in Italy in September 2012 and I used it until today 02/08/16 when I decided to buy a SE 64 GB my iphone because Iphone 5 was a problem that could not be resolved. I used it and noticed the battery was swelling and suddenly the Iphone 5 continues to vibrate in all operations. I took it to the interview and they changed the vibrating motor and the power cable, cable, but does not work. I thought it might be a problem with the motherboard by the blown battery occurried. So I decided to buy a SE 64 GB and when I restored the Iphone 5 in SE, it runs with the same problem. The store give me another a 64 and after the restored backup, the same problem occuried. They had upgraded the operating system, but the only way to solve it was a complete reset of fabric and make a backup of restore contacts and photos through the Icloud

  Can someone help me?

  There are a few app couldn't stop the iphone vibrates? without all my applications and files, the SE Iphone works fine

  I don't know if you want vibration on or off. Anyway, this is the setting you are looking for...

  Settings > general > accessibility > vibrations

• PROBLEM VIBRATION MOTOR SE IPHONE

  I bought the IPhone SE of Sahiwal Pakistan from an importer. Here is not official Apple store in Pakistan. Guarantee of the iPhone WILL be completed in April 2017. It has a problem that its engine vibration car on and it starts the earthquakes. I have reset several times but it was not fixed. I have send an email to apple, but they may not answer. Where can I make a complaint about this problem. I have all the notification about the vibrations but the problem is still off. Please help me.

  Change the settings > sounds > vibrate on ring = 'Off '.

  Settings > sounds > vibrate on Silent = "Off".

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.

• VIBRATION LENOVO A6000 PROBLEM

  My two months used lenovo a6000 gives some problem of vibration now, sound seem to be work sometimes. However most of the time this isn't, help me please!

  Try this it worked for me

  Dial # 1111 #.

  Click on test single item

  Click on Vibration.

  Click on check again

  Shake your phone vertically

  It worked for me

• XBOX 360 controller for Windows - problems with Vibration (force feedback)

  Hi ppl, whenever I have play anything with the vibration, control lever position indicator blinks in all positions before going off, then the joy stops working. If I turn off the vibration, this problem does not, although there are some games that isn't an option to disable vibrations. I use Windows 7 x 64. Thanks for the attention

  Hi thomehhh,

  Try to update the XBOX 360 gamepad software using the link below and check if it works.

  http://www.Microsoft.com/hardware/Windows7/support.mspx

  If the previous step fails then please contact XBOX 360 support for more information.

  http://support.Xbox.com/support/en/us/NXE/contactus.aspx

  You can also post your request in the XBOX forums and check.

  http://www.Xbox.com/en-us/forums

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of sound and vibration

  Hi all:

  I met a problem when using audio Toolbox and vibrations, when I select a sub vi of this Panel of the Toolbox, for example the 'filter '.

  VI, I see very little setting in the ICO (SpxImage1.jpg), but when a double click and enter in the Properties dialog box, I see more options (SpxImage2.jpg).

  what I want to know is, is it possible to set up the details in the parent vi vi sub? because these parameters are variables to my program

  Thank you

  Hi adobefree...

  Right-click on the express vi and select "Open the front panel", you can now see the express vi blockdiagram. You can store as a new vi and work with it. With the new vi, you have all the controls in the dialog box.

  Mike

• HP ENVY 4 1013tx - speaker problem, distort / vibrating at any volume level

  I just buy my DESIRE to 4 a week after that this post was created.

  First of all, I have not any common suggestion for burning inside or more. I just use it regularly and have never use speakers over 50% of the volume.

  However, things go wrong when I notice that the speaker do a slight distortion, even at a minimum volume (5%). I tried to disable the software of beats, set Equalizer of the player flat, but the speaker is distorted almost on every music.

  Tried to play some youtube and it is still distortion at all volume levels.

  I have check the card driver its IDT and its updates. No additional software for the audio except for the drive itself.

  Does anyone has a related suggestion this topic?

  I found the similar problem for envy 17... http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-envy-17-Windows-7-speaker-vibration-Dist...

  Thank you

  Hello

  Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  http://support.HP.com/us-en/document/c01868333

  After reinstalling, restart the laptop.

  When windows has fully charged, use Recovery Manager to reinstall HP Quick Launch Buttons.  Once again, when this has completed,restart the laptop.

  Incase you still have the same question please call the HP technical support and get the speaker replaced.