Problem of sound and vibration

Similar Questions

• Construction of the installer wants to sound and Vibration Distribution but my vi do not need

  My vi contains some common entries and a regular to read some 4-20mA, see attached data acquisition.

  So I save a new project and build an exe with the vi, no problem, see project files attached.

  

  Then I start building the Setup program by clicking below to install the libraries. I think that I click on the right side of the law library?

  

  

  But lo! OR say I need sound and Vibration Distribution, now, where does? My vi has no sound and vibration functions...

  

  I click on no, the installer don't build Labview.

  I click Yes, Labview kept asking me where is the audio library and vibration.

  

  I bought a NI Developer suite, expensive things like costs about US$ 4000 +. My software vendor told me that I don't have the license for the sound and Vibration Distribution.
  So, what should I do? Clicked on some bad settings during the generation of the installer? Is there a way around this problem? Thanks in advance!

  Hey,.

  Try to repair or uninstall/reinstall your DAQmx driver as described in the following KB: http://digital.ni.com/public.nsf/allkb/8C37AB992EB29EA7862571680056E78A?OpenDocument

  Christian

• Difference between signal y express sound and Vibration Assistant

  Buenas,

  Cuando instalas el of sound and vibration luego software, tienes back ejecutables: Sound and vibration assistant y signal on purpose. Los abres los back if you lo lo mismo. Mid questions are:

  • What difference between hay?
  
  
  • Da igual use uno u otro
  
  
  • If desinstalo uno los pasa algo back?

  MUCHAS gracias

  Saludos

  Hola, aaramburu,

  in lenguaje andar por casa, Signal Express are el programa matriz y S & VA el are UN modulo what instala encima y reviews una paleta Programación than permite usar funcionalidades specific sonido Análisis y constant. El Signal Express has leaves, apply filters, a configurable software para datos closing, etc. If el S & VA mallards are mallards nuevas funcionalidades enable use tarjetas para señales dinamicas o DSAS that enable leer of tacometros, acelerometros, hacer análisis octavas, etc.. ES como if instalas LabVIEW, are UN lenguaje general Programación y quieres una camara use. Sober el propio LabVIEW has instalar Modulo de Vision para el LabVIEW y is anaden kbes imagen aforementioned funcionalidades.

  No nada desinstales, one extended capabilities. As has using uno u otro, depends on the nature of the application as desarrolles. If going to a Signal Express y seleccionas help > Getting Started with > Getting Started with LabVIEW Signal Express Fiesta el tutorial Básico para el manejo del entorno con guiados exercise. Leads unas cuatro horas. If you want to develop una application of sonido y vibration, using a high port tal y como is muestra in el tutorial help > Getting Started with > Assistant Sound and Vibration.

  I hope this information you follows from utility.

  Jesus.

• Practical measurement "sound and Vibration Assistant.

  Hallo,

  ICH möchte eine Maschine von Gerauschemissionen untersuchen. Dazu soll mit Hilfe der Norm DIN EN ISO 11201 der emissions-Schalldruckpegel altitute werden. ALS Messhard-und software are mir following components available:

  Software:

  -LabVIEW 2010
  -Noise and Vibration Assistant 2010
  -Windows 7

  Material:
  -NI 9234 Messsystem mit NI USB-9162
  Condenser-Mikrofon
  -Laptop

  ICH möchte mit dem 'Sound and Vibration Assistant' ein Oktavspektrum bzw. Ein 1/3 - Oktavspektrum-> Terzspektrum aufnehmen. Dazu sind mir ein paar aufgekommen questions.

  -Laut Norm is die Messdauer bei measurements in 30s Oktav-Terzbandern fur Frequenzbander mit Mittenfrequenzen von 160 Hz low sowie für die 15s und Frequenzbander mit Mittenfrequenzen von 200 Hz und high.

  • Wenn ich alglemein eine measurement starte andert sich jede Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden 51, 2K das all Spektrum von samples. Also jede Sekunde ein neues result. Wenn ich also 30 Sekunden mass, means are dann, dass ich aus 30 results (Pro result ein entire Terzspektrum) den Mittelwert bilden kann bzw. muss?
  
  
  • Wie ich dann die unterschiedlichen Aufnahmedauer auf die Frequenzbander anwenden should? Should ich die highest frequency und niedrigste frequency q und dann der Zeit messen vorgegebenen correspondingly?

  -Laut Norm should as jedes Frequenzband eine Pegeldifferenz von mind. 10db zum Umgebungsgerausch available breast.

  • Also ich z.B. das Hintergundgerausch über 30 Sekunden mass. Dann jedes Frequenzband über 30 Mittelwert den Werten as image. DAS same mache ich dann bei Betrieb der Maschine. Kann ich dann die dB values direkt miteinander comparisons sprich Gabriel bilden die um zu sehen, ob die Pegeldifferenz 10dB kleiner oder grosser ist oder muss ich eine Logarithmische Pegelsubtraktion paper? nach der Formel section = 10 * lg(10^0,1*L1-10^0,1*L2) z.B.?

  -Wenn ich den aquivalenten Dauerschallpegel Leq messen möchte, die Die Formel Gesamtmessdauer wo mit einfliesst, wird dann der Mittelungspegel über eine Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden samples von 51, 2 K berechnet oder ist das result über die ganze Messzeit (wieder 30 Sekunden z.B.) berechnet worden? Oder ich aus den werten eine weitere Mittelung paper individual should?

  Viele Grüße

  Hallo Voyage200,

  Wenn ich alglemein eine measurement starte andert sich jede Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden 51, 2K das all Spektrum von samples. Also jede Sekunde ein neues result. Wenn ich also 30 Sekunden mass, means are dann, dass ich aus 30 results (Pro result ein entire Terzspektrum) den Mittelwert bilden kann bzw. muss?

  -> Should der Arbeitsspeicher gross genug breast ware are ermöglichen das auch Signal 30 Sekunden gepuffert mit dem mittelfristig-Verbraucher-Entwurfsmuster appears und die exported analysis often.

  Wie ich dann die unterschiedlichen Aufnahmedauer auf die Frequenzbander anwenden should? Should ich die highest frequency und niedrigste frequency q und dann der Zeit messen vorgegebenen correspondingly?

  -->--> Als Tipp Ja am examples of Anfang arbeiten mit den einfachen und Express VI. Powerful exported Programmieren mit den Low Level VI.

  I hope sharp Antworten helfen Ihnen weiter

  und verbleibe mit thank wurde

  Lorenz Casper

• The NI9423 will work with Sound and Vibration VI

  Will be that the NI 9423 mounted on a chassis cRIO work with the NO audio and vibration of VI?

  I have an optical encoder of 10-30 V 100 pulses/revolution and would like to make angle field order analysis with her.

  is the NI9423 a card appropriate for this purpose or is something else better suited, I'm open to change the type of encoder if necessary.

  Hi Bodger

  How fast do you think the tree to turn to? The speed of switching module is able to pass to the 1uS extremely quickly. This means that you should be fine unless you are turning the tree at a ridiculously fast speed of approximately 600000 RPM.

  Regarding the reading of signals with the sound and vibration screw, you should be able to do this using the digital tachometer functions.

  Thank you very much

  Dan.H

  NIUK Applications Engineering

• More Sound and Vibration - Leq measurement?

  Hello

  I'm new to following Sound and Vibration and can't seem to find how to measure Leq. To clarify, I do not have LabView with this package, just the Sagno & Suite 2010. Currently, the only options are linear, exponential, maximum and equal trust (all found in the analysis of Octave SPL stage).

  Should I have LabView to perform a running Leq or Leq measurement?

  Hello

  Examines the LEQ under analysis. Take a look at the following screenshot.

  

  I would like to know if this isn't what you're looking for.

  Eric

• Purchase / upgrade of LabVIEW with more Sound and Vibration

  Hi, supporters OR Forums,

  I'm new in LabVIEW but I'm working on a project that needs to use LabVIEW in these toolkits: DAQmx, PID and then Sound and Vibration Control.

  In order to experience on the vibrations, I need to use screws of Suite Sound and Vibration, which was not purchased in my Institute. We had the license for LabVIEW 2009 SP1. Unfortunately, I have a VI file written in LabVIEW 2010 my partner. According to the records of view VI, there is a lack of following screws:

  -SVFA Power Spectrum.vi
  -Application Directory.vi
  -SVT FFT .vi spectrum (Mag-Phase)
  -Frequency response (Mag Phase) .vi SVT
  -SVFA amplitude and Phase Real and Imaginary.vi
  -SVL get spectrum subset.vi
  -SVT UFFT58 write.vi
  -SVT UFFT58 write record 6 vi
  -SVT HFFT58 close file.vi

  I would like to confirm if these screws are supplied in the detroit and Viration Suite or / and other toolkits. If all of them can be found in the following Sound and Vibration, what I have to do is to buy the offer away from NOR, is it not? How much should I pay for this Suite.

  On the other hand, if we upgrade from LabVIEW 2011 (which is said to be able to deal with better timer - for the function of data acquisition), how much in total so also buy us more Sound and Vibration 2011.

  In comparison, which of the above two options is preferable in terms of price.

  For your information, I am working on my thesis at University in this means we would like to have a university degree.

  Plesea give me ideas on this subject. I'm sorry if my post is not fit to be posted here but I sent 2 emails to NI Germany (1 for the customer on the Web page Service NOR) and 1 in the Sales Department, but there is no response after more than 3 weeks.

  Thank you very much.

  Kind regards.

  Thinh Vo

  Hi thinhvo,

  All of these VI are included in the Suite Sound and Vibration, which means it's the only additional package that you would need to buy.  On the site OR in the States, the Sound and Vibration Measurement Suite USD $4119 costs.  Since I'm an applications engineer, I'm not in a position where I can advise you on the price, and I am sorry to say that it will be easier for you to contact your engineers in sales in Germany (I guess you are in Germany).  You may have better luck calling into lines of support rather than by e-mail.

  Thank you

  Lisa

• sound and Vibration Assistant. Speaker output

  I am new to the sound and Vibration Assistant and he had to get monitored sound of a surfboard 4722 the speaker to computers.  I can capture data and display it, but I want, but can't seem to find a way to get the sound to the speakers.  Thanks for any help

  Hi Mike.

  Unfortunately, the Sound and Vibration Assistant doesn't have a built-in way to route your signal input to your speakers.

  However, if you have LabVIEW, you can add a step to run a LabVIEW VI that generates output a file from your computer speakers (or external speakers).  You must write a LabVIEW program that either acquires a signal or load a file of recorded signal, then this signal to your speakers.  "You will most likely use the Play Waveform Express VI of the Express" exit pallet on the block diagram.  "After you wrote this program, you need to add a step in the sound and Vibration Assistant using the Add a step" run a LabVIEW VI.

  I hope this helps.  Good luck with your application!

• How to cancel the keyboard sounds and vibrations on an Acer Iconia A1 - 840 8 inch tablet

  Keyboard continues with the audio and vibration all in settings | Sounds | Tactile sound and vibrate on touch are unchecked.  It is particularly strong for the Google Chrome browser.

  Settings/language & entrance

  on the right side of the keyboard that you use, there is an icon that will open some keyboard settings, tap that

  Uncheck the box

  Vibrate on keypress

  Sound on keypress

• BlackBerry Z3 sound and vibrate does not at the same time

  Hi support them.

  I recently purchased the BlackBerry Z3.

  It supports no sound & vibrate at the same time.

  In Normal mode, I activated sound and vibration, but it only gives sound for incoming calls/messages.

  (does not vibrate)

  In vibration Mode, it only vibrates.

  It's the first time I use a Blackberry and I'm upset with the basic functionality works do not.

  Please answer.

  Kind regards

  Sunil.

  I'm glad things are back to normal for you.

  See you soon.

• Problem of sound and Tecra 9100

  On another thread on this problem of sound, a person has say go to http://eu.computers.toshiba-europe.com/innovation/faq.jsp?service=EU&FID=TRO0000001b59
  Well, I went there and got the drivers but at halfway, but installation it says not installed warning drivers and closes.

  Can anyone help?

  How to help if you didn t offer accurate description of what you do with your laptop?
  Are you doing the clean install of Windows XP Home edition?
  What version are you using (without service pack)?

  If please post more information and are not afraid to write a little bit more.

• Problems with sound and Audio - realtek hd audio is not compatible for the audio device

  I use Windows XPand receives my sound and audio to work, I got a lot of response to this problem, but not the right answers, I got my sound set correctly but my audio does not work. In my default audio device is defined as realtek hd audio that is not compatible for the audio device, I tried to remove it without any success because I don't know what else can be done to solve this problem. I did an update can also be found a update driver for my sound card in windows. I also run microsoft fixi it and said that my default audio device is wrong, I tried to change, but nothing seems to work. Before that my computer was working fine and now all of a sudden nothing works. Everthing is up-to-date on my computer except the I'm having problems. all I ask you, how can I removed realtek hd audio since I graduated from the audio device by default.

  Thanks for a quick reply.

  Hello

  You will remember to do recent changes to the computer before the show?

  I suggest you to download and install the latest driver audio realtek for Windows XP from the link and check if the problem occurs:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• How can I integrate IPS into the Sound and Vibration Assistant 6.0?

  I found out how integrate time domain signals to m/s in S & V 6.0 Wizard, but not IPS.  I could scale the signal, but the axis labels will be wrong.  How can I integrate directly to the IPS of the entrance of G?  Also, is there a way to do the same thing for the analysis of frequency domain?

  In the audio wizard and vibration - step vibration level, use

  on the integration tab - select double integration and click export integrated signal

  Now you have a shift of signals in the right units.  Make a spectrum on that and you get a spectrum of integrated signal.

• Problem with sound and video in AE

  Hello. I am a first time in the program of After Effects user and incurring a problem.

  I was editing a video, and at one point, the sound is completely cut. I have corrected a number of things, including

  Re-import the original video file in the program, and the checking of audio and wavelengths in this layer (i.e. flatlined).

  Can you help me please? Is there something else I can do?

  But is it really strong in the source file? Check in another tool of media player, editing or sound first. People sometimes do stupid things like turn off the microphones in the middle of shooting... Other that it could just be a memory problem where you run out of RAM to decode the audio integer and the waveform preview. Choose the format audio anotehr or split clips in another program might help, especially if your audio is embedded in a compressed format. Æ don't like al particulalrly MP3...

  Mylenium

• Assistant OR-9234/Sound and Vibration: being reset to zero (crazy) automatically input signals

  Hi all

  I have a voltage source and a force as entries in a sensor module DAQ 9234.

  The software focuses both signals whenever they change. For example, if the voltage is read by data acquisition increases up to a constant value, the software will trace an increase in tension, followed by a slow return to zero. Similarly, if I increase the force applied to the force sensor and keep it at a constant value, the program will draw an increase in force, followed by a return to zero.

  Here is a graphical representation of the problem, which uses the sensor force for example:

  

  The sensors are passive. The sensor is a PCB 02 208, and the source of tension comes from a LDM-1000 signal conditioner, which receives a signal from a MHR 250 LVDT. By the LVDT core displacement changes are interpreted by the signal conditioner, which translates as the measure of a voltage value that can be read by data acquisition.

  Thank you in advance.

  I assume you have the rule 9234 on coupling AC mode, while you should use DC coupling.

  -AK2DM