VIC1240 and 2208xp

Similar Questions

• FEX Uplink and Ports on the side Server

  I am very new to the environment of the UCS and having to return to the current fairly quickly. I decided to start with the chassis. But have a few questions.

  I hope someone can clarify how serverside ports are assigned less than ports uplink, 2204XP and 2208XP.

  My understanding is that the side ports server are assigned to the uplinks based on the number of uplink configured at the END.

  Once the FEX is initialized ports are hardcoded.

  Assuming 2 (6200 series) FI and 2 FEX (2204).

  2 each to their respective FI FEX uplinks

  8 blades width in the chassis.

  My understanding is;

  Uplink port 1 receive blades (1, 3, 5-7) and uplink 2 (2, 4, 6, 8)

  Question: Which ports are active for each blade and that FEX.

  For example the blade 1 assigned to Uplink on FEX A 1 with FEX B 1 uplink failover

  Blade 3 assigned to Uplink on FEX B 1 with FEX A 1 uplink failover

  Thanks in advance people...

  Hello and welcome to the community,

  "" My understanding is that the side ports server are assigned to the uplinks based on the number of uplink configured at the END.".

  Server ports are assigned to connections rising from ports either automatic (load balanced by available uplink interfaces) or manual pin (PIN LAN groups hard coded)

  2 fIs and IOM 2204 2 with 2 cables on each IOM: "UpLink port 1 receive blades (1, 3, 5-7) and uplink 2 (2, 4, 6, 8)" "< this="" is="" correct,="" odd="" blades="" through="" odd="" ports="" and="" even="" blades="" through="" even="">

  Which ports are active for each blade and that FEX.?

  In this case with a 2204, IOM provides 16 internal ports, 2 for each blade, and you can check which one is active with the command "Show software platform woodside m" mode FEX which is realized with the following commands:

  UCS # connect the IOM

  FEX-1 # display software platform woodside m

  

  You can also go to the vNIC itself in the "Servers" tab by going to the Service profile > network and then double click on in the vNIC and you will see the configuration:

  

  For example: blade 1 assigned to Uplink on FEX A 1 with FEX B 1 uplink failover

  Blade 3 assigned to Uplink on FEX B 1 with FEX A 1 uplink failover

  This will be the case if you have the 'discovery of the chassis/FEX policy' located in the 'grouping preference link' on 'None' instead of 'channel of Port "; If it is "Port Channel", I won't miss not until all other links fail in the same module e/s, see below

  

  NOTE: this option is valid only if your hardware is ALL second generation, in other words, it does not work with fabric 61xx interconnections or 2104 IOM

  I hope this helps, if it does, please note it.

  -Kenny

  Note ensure on the limitation of the function of the channel port between IOM and the tissue Message was edited by: Keny Perez

• UCS to UCS UCS 2104XP 6248UP AND to 2208XP of the UCS 6120XP

  Hello

  1. UCS 6248UP is compatible with the UCS 2104XP? AND
  2. The UCS 6120XP is compatible with the UCS 2208XP?

  Thank you.

  Hi Michael,

  Coupling of the FI with the IOM shouldn't matter.

  With 2208 the number for the day of plane ports increased to 32, while they are 8 with 2104.

  The only requirment is to have a minimal version of 2.0(1m)

  Please visit the link below to confirm the same.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/release/notes...

  Thank you

  Majid

• 10G between adpater and blades for VIC1240 + 1280

  As my other discussion suggested, I VIC 1240 and 1280 cards installed on the B200 M3 blade.

  UCS automatically creates 4x20G port-channel between the adapter and the blades. We have therefore 80 G total n/b to the INSTITUTION of the blade. Side has 40 G and 40 B side

  I have a delicate question: if I could change the 4 ports-channels to 8 individual links while I have granular control to 10G does level not 20G

  Can anyone help to answer the question?

  No, these are internal pc, automatically. Be aware that a single stream is limited to 10G, more if you have not configured a pc between the IOM and fi, you are limited by this public static pinning (IOM - FI) to 10G anyway. PC between IOM and fi requires the second generation material, for example. 62xx and 22xx.

• VMware 5.1 with compatibility virtual RDM and Microsoft SQL Cluster mode

  Hello

  I am a bit confused by the VMWare documentation and hope someone can point me in the right direction.

  I want to know if it is possible and supported to create a cluster of SQL 2008 R2 2 nodes (Server 2008 R2 SP2 are VM) on a 2 node cluster VMWare 5.1 with the use of Virtual RDM compatibility?

  When you read the PDF on vsphere5.1 on the link below on page 9, there's a indicating note 'NOTE Clusters on multiple physical computers with no-pass-through RDM is supported only for Windows Server 2003 clusters. It is not supported for clustering with Windows Server 2008. »

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Setup-MSCS.PDF

  So that means that I want "a 2-node cluster sql 2008 R2 server" is not supported?

  But I also found this link below and in the table of the column on the Cluster SQL line RDM is said 'yes' with a 2.

  VMware KB: Microsoft Clustering on VMware vSphere: guidelines for supported configurations

  Means 2/redirects-> for more information on shared disk configurations, refer to the Disk Configurations section in this article.

  -> Disk configurations

  • RDM: Configuration using a shared Quorum for storage or data must be on Fiber Channel (FC) based on RDM (physical cluster across boxes "CAB" mode, virtual mode for cluster in a box "IPC") in vSphere 5.1 and previous versions. RDM on storage other than CF (iSCSI and FCoE) are supported only in vSphere 5.5. However, in earlier versions, FCoE is supported in very specific configurations. For more information, see Microsoft clustering solutions table above note 4 .

  What follow-up note4->

  1. In vSphere 5.5, native FCoE is supported. In vSphere 5.1 update 1 and 5.0 Update 3, two cluster configuration of the node with Cisco NAC (VIC-1240/1280) cards and driver version 1.5.0.8 is compatible with Windows 2008 R2 SP1 64-bit guest operating system. For more information, see the VMware hardware compatibility guide:
     • Cisco UCS VIC1240
     • Cisco UCS VIC1280

  This means that it is suuported, I "m confused.

  Hi Bypy,

  Two windows 2008 R2 SQL virtual cluster nodes with RDM is supported only for the IPC or Cluster In a Box that is to say if the two virtual machines reside on the same host ESXi. The same configuration is not supported for the cabin or Cluster across boxes (virtual machines running on different hosts ESXi).

  The CAB, you go for the physical RDM mode.

  According to this link, http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959

  SQL Cluster using windows 2008 R2 is supported for both physical and virtual mode RDM. Between physical and virtual mode depends on whether you want the CAB or IPC respectively.

  I hope this helps.

  See you soon,.

  Arun

• I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

  I have an ipod touch 128 GB... but I'm almost to reach its maximum.

  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

  is this possible?

  What should I do?

  Matt

  When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

  (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

• Why my notes sync between my Mac and iPhone?

  I have my MacBook Pro with Mac OS X 10.9.5 Mavericks and my iPhone is running iOS 10.0.1 and used to synchronize my notes! Is it because of the huge gap in operating systems? I SHOULD update my Mac to Mac OS 10.10 + for this problem? Thank you!

  In order to synchronize Notes between your Mac and iPhone, you must configure iCloud > http://www.apple.com/icloud/setup/

  But this requires macOS Sierra 10.12, the latest available version and the last iOS available for your iPhone.

• Photos, iCloud and OneDrive sync

  Hi all

  I have a question on how to better organize my photo library.

  For the moment, on my space OneDrive (mapped to a partition on my MacBook SSD), I have a folder called 'Images' containing just about all of my photos and organized by folders.

  Since my tech ecosystem is roughly marked Apple (iPhone, iPad and MacBook), I would use the power and versatility of the Photos and iCloud, so that everything remains in all of my devices and free space memory iPhone sync.

  Here's the question: I want to keep my pictures saved on OneDrive, then put the Photos on my Mac to view photos from this folder and use iCloud to share through my devices.

  -I see the same folder structure on iPhone and iPad a synchronization is complete?

  -More important, if I take a picture with my iPad, it will be placed not only on iCloud but also automatically added pictures on Mac which, in turn, puts it in the folder of photos on my OneDrive?

  -Finally, take pictures of my iDevices will store them in the film. If I move them into folders, photos will be mapped (copied to iCloud) on my other devices constantly (in the folder)?

  I would like to notice I'm not trying to avoid using iCloud premium space - I already have a subscription plan of 50 GB that I don't mind mounted. I just keep having just all my photos on OneDrive.

  Thank you in advance for any comments you may have!

  Paul

  The answer is simply not

  The photo library can not be stored on a basic system to pictures not work will have a referenced library, so you may not have a local library references photos on a disc - the photo library can be on a local drive connected directly to the Mac OS Extended format

  You can synchronize between the Mac and IOS devices using iCloud library that synchronizes the photos and the structure of the album/folder between devices

  When you import pictures you can export them to your OneDrive record and have a copy (not associate Photos somehow) on a disk

  You can not have the same physical pictures in Photos and on one disc - each must have its own copy of the Photo

  http://www.Apple.com/icloud/photos/

  LN

• Video and photos of backup

  Hello

  Anyone know the best way to back up photos and videos I took Iphone 6 my mom.

  I just got a new Iphone 6 more and have an icloud account, she has one more.  I don't know how to proceed.

  Thank you

  This article can help you:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  You get free 5 GB of storage iCloud. If you want to save more than 5 GB, you buy more storage iCloud.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• I need to change my security issues and said we do not have enough information to reset your

  I need to change my security but said Questions we have insufficient information to reset security of your apple ID questions.my is [email protected] I want to slove this problem please help me

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145174)

• Updated for Sierra and cannot import images

  I upgraded to Sierra and my camera, a Canon EOS 20 d is is properly recognized.

  Prior to the upgrade:

  When I plugged the camera would open automatically. I close and open Photoshop. PS I would like to select Import-> device and my camera would be identified. When I select the camer displayed thumbnails of photo.

  After the upgrade:

  When I connect the camera pictures only opens automaticall. If I open the pictures is not a camera attached.

  PS when I select Import-> my camera device is represented, but the icon is an external drive. When I select the icon nothing is displayed.

  Hello ChuckSto,

  Thank you for using communities Support from Apple. I know have a problem with your Mac and your camera is not what you expect. The good news is that the next steps will be useful for your problem of your camera is not recognized:

  If nothing happens when you connect your digital camera

  Try the following:

  • Make sure that the USB cable is properly connected to your camera and computer. If your computer has a USB port, try connecting the cable inside.

  • Check your camera to make sure he turned on and set to mode suitable for importing the photos. See the instructions that came with your camera.

  • Check the memory card of your camera for damage. See the documentation that came with your camera for more information on this page or other potential problems.

  Photos for Mac: import pictures from a camera or a mobile device

  See you soon!

• Speeches and a .key file cannot be opened

  I'm unable to open or work on Keynote documents. I get an error popup image that says: cannot open 'FILE.key' because it is not a valid document to Keynote. I'm assuming that the same problem will occur in numbers and pages so I have not used either of these programs in a very long time so I do not have a file to test on.

  I know that the file is indeed a valid Keynote document. I recently had to reinstall my package iWork 09 since the original software discs - I have them have not purchased through the App store or my iCloud account. I have a software key. I can't move my OS to Sierra right now because I have other software that I use for work and tech support as we said we cannot go immediately. My current OS is El Capitan 10.11.6, and I have a MacBook Pro 15 "retina.

  Any advice on obtaining Keynote works again until I can make the upgrade to Sierra?

  Thanks in advance.

  Sounds like you are trying use Keynote 09 to open a file created by Keynote 6.

  Keynote 09 cannot open files of version 6 because they are a different file format.

  If this is the case, buy and install Keynote 6 from the Mac App Store.

• Universal SE Clipboard and iPhone

  Universal Clipboard will work between a MBP of the retina and an iPhone SE?

  Hello curly1,.

  Thank you for using communities of Apple Support. It is my understanding that you want to use the universal Clipboard between your MacBook Pro and the iPhone OS. This is a great feature. I'm happy to help you.
  

  Universal Clipboard

  Universal Clipboard works with these devices and operating systems:

  iOS 10	macOS Sierra
  iPhone 5 or newer iPad Pro iPad (4th generation) iPad Air or newer Mini iPad 2 or newer iPod touch (6th generation) or newer	MacBook (early 2015 or newer) MacBook Pro (2012 or newer) MacBook Air (2012 or newer) Mac mini (2012 or newer) iMac (2012 or newer) Mac Pro (end 2013)

  Requirements for continuity on Mac, iPhone, iPad, iPod touch and Apple Watch

  Have an amazing day!

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.