Video and Audio do not work. getPLusPlus_adobe_reg.exe Application error?

Similar Questions

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?

• my video and streaming does not work correctly, always stop.

  my video and streaming does not work properly, his game and stops all the time.

  Hello

  1. this happens when you play movies or videos saved on the computer?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  If this happens when you stream or watching videos online, then I suggest you day flash player latest version and check if it helps:

  http://get.Adobe.com/flashplayer/

  Method 2:

  If the problem occurs even when you try to play the recorded video on the computer, then try to update the latest drivers for the video card and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see this link:

  http://support.Microsoft.com/kb/2532294

  It will be useful.

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay

• Capture VHS in Premiere Pro 2015, choose the option to capture video and Audio, doesn´t work!

  I used the first Pro CS6 and Premiere Pro 2014 before capture VHS via a record JVC deck, but now, when I do the same process in Premiere Pro 2015, it captures only the video in the option Capture Video and Audio mode. The only way to capture VHS audio is her choose Audio separately, because in this mode, it works. But then I have to synchronize video and audio, and it is not the best option. I can´t find no reason or settings which differs before when it worked. Do you have any suggestions?

  I use Mac OS X 10.9.5.

  Hello! I found the solution. The novelty in first Pro 2015 is that you mark a video and an Audio track to drag the material captured in the Timeline! Now, it works fine.

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• Dell Deminsion 4700 set to upgrade to vista and audio drivers not working not

  OK I installed Vista and before that I was supposed to pilot audio donwload for noise at work. Well, now that I've updated the drivers I downloaded again does not work. So now I have no sound at all. No audio device installed. What is there I can do to fix this?

  Maybe Dell doed has NO Vista Audio drivers for your model.

  If they are not, there is nothing you can do.

  http://support.Dell.com/support/downloads/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• VIDEO and AUDIO CLIPS not COUPLED in TIMELINE

  I just noticed something in recent weeks, that my audio and video clips become couples in the timeline. But if I press alt + click selects audio and video clips. But a single click selects just the video or audio. I understand that alt + click was chosen, either video or audio to a linked file, it seems now vice versa.

  Can someone explain where I am mistaken here? Is this something to do with track targeting which I am not understand?

  Hi Srukweza,

  Shadreck Rukweza wrote:

  I just noticed something in recent weeks, that my audio and video clips become couples in the timeline. But if I press alt + click selects audio and video clips. But a single click selects just the video or audio. I understand that alt + click was chosen, either video or audio to a linked file, it seems now vice versa.

  Can someone explain where I am mistaken here? Is this something to do with track targeting which I am not understand?

  Looks like you have deselected the selection bound function. Click on the button of the timeline show the screenshot and see if the selection bound has returned.

  

  Thank you

  Kevin

• Videos and games does not work, Mac Snow Leopard

  It is a problem, that I actually had for a while, but it never really touched a large part that I thought it was important. Now it is just boring.

  In fact, some video players and games online does not work. Most video players outside of YouTube will not work. The player will load, but the video never does. For example, the last video with that I got in trouble is the video player of Nickelodeon for the legend of Korra. When I try to watch that, I get a black box and an image of type "Loading" appears, swirls around once and then disappears. After that, it becomes unresponsive. This is typical of many, but not all, video players, I met on the web.

  I don't know if it's related, but I also had problems with various games. Often times, they work very well until at some point, as the end of a level, transition and then they will become numb. A good example here is the game Bloons Tower Defense 4. It is a game that I know was on my old system. But now, when it loads the level, it freezes before loading the tours available to place and reacts differently. An example is shown below. The box top-left question mark in the right sidebar should reveal a dart monkey and my money of departure must be filled, but instead, the game crashes to the top. I had similar blockages on a number of games, so I am sure that the problem is not just with this game.

  

  As I said, I had this problem for awhile now. I have updated Flash and my browsers several times since they started. I have these problems in all my browsers (Safari, Opera, Camino, Firefox), there seems to be a problem with Flash. I also tried to uninstall and reinstall flash, and disable all other plugins browser.

  I use a MacBook Pro with Macintosh OS X 10.6.8 leopard snow, 2.53 GHz Intel Core i5, with Flash 11.2.202.233. Current browsers: Firefox 11.0, Opera 11.61, Camino 2.1.2 Safari 5.1.5

  Any ideas what I might be dominant?

  These errors make me think that Flash has problems to write to the folder were Flash cookies are stored (LSO, sharedobject).  On Mac, it's

  • ~\Library\Preferences\Macromedia\Flash flash
  • ~\Library\Caches\Adobe\Flash flash

  You can check the permissions for these folders?  You might want to run check the permissions on your disk (http://support.apple.com/kb/HT1452), and then delete the ~\Library\Preferences\Macromedia folder and the folder of player of ~ \Library\Caches\Adobe\Flash.

• Ring of blackBerry Smartphones Urgent-bold 9000 and audio does not work after upgrade to 5.8.8.822

  Updated yesterday at 5.0.0.82 2 and now DO NOT ring the phone.

  Also get the message "an error occurred attempt to play media" for all types of media even when I test the profiles.

  Battery pulls and all the usual stuff, but no help.

  His camera work.

  How to downgrade OS and that is should I go since it is not good?

  Hello

  Make sure that you run software that is released by your carrier found here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp

  Download and install the latest version of the software on your computer, then follow this link to complete a clean reload of the BlackBerry Device software.

  Link: http://bit.ly/cKy9A0

  Test before you restore all backups.

  Thank you

• Video and Audio does not move to the timeline.

  Hello.

  For these last days, I worked on a video in Adobe Premiere Pro CC. I got no problem with sounds moving in the timeline, so far...

  I can now move more video/audio files to my project on my calendar. The only way I can do this, is to make a new sequence, but that means, I don't see anything in the other sequence, it is simply a small hand closed and a crossed circle.

  No idea how to fix this? I posted a picture of my calendar down below.

  Thank you!

  

  I have a vague feeling that you have a point and an out point in your calendar that could interfere with your work, but I can't be sure. Try a right-click anywhere in the timescale of your timeline and choose 'Clear In and Out'. Then try to use mobile media in the Timeline. Please let me know if it works or not. Good luck!

• While in Firefox, I get no longer clicks for example feedback when new pages are open. The videos and audios are still working okay

  I lost sounds of entry of Firefox browser. Sounds for Audio/video programs seem to work well. How to restore the new sounds of page, etc.?

  This has happened

  Each time Firefox opened

  == 7-10. any corollary of significant new software.

  • Navigation sounds: https://addons.mozilla.org/firefox/addon/1030
  • Noise: https://addons.mozilla.org/firefox/addon/8438

• My computer only plays system sounds and audio does not work.

  When I tried to open a file in windows media player I am prompted that there is a problem with my audio device. I am currently running windows xp and my computer is a HP Compaq Presario v2000

  Hello
  1. is the issue limited to Windows Media Player?
  2. What is the accurate and complete error that you receive when you start Windows Media Player?

  Please provide more information on the issue so that we can better help you.
  In the meantime, you can check the link below.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• My WIFI and 4G are not work with specific applications, even though I have access to both?

  After the new update, the applications on my phone are not connected to my 4G or WIFI network home. I tried to reset my phone, but the problem persists. I am still able to call and text, but it's using my data even when I'm at home. I don't know how to solve this problem. This would have something to do with a new application that has appeared in my settings: (null)?

  Hello Mia,.

  I understand that you are having multiple problems with your applications and data connection. You also see an option to Null in the settings app. For me, it looks like you need to restore your iPhone. Let's go over how to do this and then sync thing back above.

  I would like to start with updates on your iPhone. It will be particularly to the research in the App Store, as well as in settings > General > software update. If it's all the goo, then you want to transfer iTunes purchases to have a safe copy of them. Once that is done, is to reset your iPhone in settings > General > reset > erase all content and settings. Let it finish and then start downloading or synchronization of the applications one at a time to test. If it works, you can speed up and synchronize the rest of the file content.

  After erasing and setting up as a new device, your device is now in a factory setting. Try again what you were trying when you first found the question to determine if erasing and setting up a new device solves the problem. Contents of the device could have caused the unexpected behavior.

  • If the problem persists, you can contact the Support technique Apple.
  • If the problem is resolved, a type of synchronization of content both on the device. For example, if you had a problem reading music, add songs to iTunes and confirm that they will play. If your contacts have not been loaded successfully, you can add contacts to the rear. After each sync, test to see if the problem is back.

  Take a look at the article below to learn more in-depth details on how to do this.

  How to clear your iOS device and then set up as a new device or restore from backups
  https://support.Apple.com/en-us/HT204686

  Take care

• Video and Audio not connected

  Somehow, I'm away PP CC 2015 in a State where I drag a video clip in the project and then to the timeline, the video and audio are not related?  Below, he thinks they are, but in the timeline I can drag video and audio around as they are not?  This just started happening.  Normally when I drag a video clip on the timeline, the audio and video are linked, and when I drag a he drags both unless I'm going to Clip and separate the.  What I did wrong and how to do go back to the way it worked by default?

  Thank you

  
  Dave

  Try clicking on this button: