Video card is not supported.

Similar Questions

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.

• Display card/video card does not support DirectX

  First of all, I thank you in advance for any help I receive...

  When running a game program, on occasion, the program is interrupted by a blue screen with a message something very long fault and then my computer shuts down. When I reboot, I get the error message statement, I send and the message...

  To upgrade your

  This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer

  If someone can point me in the right direction, until the card video and/or display adapter that I need, I would appreciate it. I don't run a daily automatic updates... don't know if it's important. Thank you, once again.

  Hello

  ·         What is the exact blue screen error that you are experiencing?

  ·         Game in which you try to read?

  ·         Which version of DirectX is installed on the system?

  Method 1:

  If you do not know the version of DirectX that is installed on the system, then, I suggest you follow the steps mentioned in the article below.

  How to determine the Version of DirectX using the DirectX Diagnostic tool

  http://support.Microsoft.com/kb/157730

  Method 2:

  I suggest to download DirectX on the system from the link below and then install it on the system and check if the problem is resolved.

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Error - device 0 video card does not support at least shader model 2. Please update your card.

  Original title: Windows Xp graphics Shader model 2.
  We receive a message that says "device 0 graphics card does not support at least shader model 2. Please update your map"for a new pc game SIMs3... can you help me with this, please. We have downloaded the version lasted Grphics Intel for Windows;  Where map video to update / upgrade? Thank you for your time.

  Hi Yagimc,

  What is the model of the graphics card?

  To play SIM 3, the graphic card must meet the following requirements:

  DirectX 9 compatible .0c card with 128 MB RAM (NVIDIA FX 5900/ATI 9500 or better) and support for Pixel Shader 2.0.

  You can contact Intel support to check if your graphics card supports the above features.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot play an online game because my video card does not support shader model. generally work started recently please help

  usually, I play a game called League of legends online and last night I tried to get into a game and got an error message that reads. DirectX error check and make sure that your video card supports shader 2.0 model and uses drivers from the manufacturer. I've played a few games yesterday but it was all of a sudden when it stopped to let me play. Help, please. Thank you

  Hi Casey,.

   
   
  1. do you use Internet Explorer to play games online?
  2. If so, what is the version of Internet Explorer installed on your computer?
  3. have you made changes to your computer recently?
  4 are you facing this problem only with shader model 2.0?
   
  If you use Internet Explorer to play games online, I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Follow the link and check if that helps.
  The problems of games online using Internet Explorer
   
   
  Method 2: You can also check out the link and check if it helps.
  Run the DirectX Diagnostic tool
   
   
  Method 3: Update cheque and card video if this can help.
  Updated a hardware driver that is not working properly

• graphics card does not support the Aero effects?

  Sapphire Radeon Vapor-X HD 7770 GHZ OC 1 GB
  DDR5 DVI-I/DVI-D/HDMI/DP PCI-Express graphics card

  1 x Dual - Link DVI, 1 x DVI Single-Link
  1 x HDMI (with 3D)
  1 x Display Port
  Display Port 1.2
  1100 MHz base clock
  5200 MHz Effective
  128-bit GDDR5 memory

  the SAPPHIRE HD 7770 Vapor-X OC Edition
  has 1 GB of more recent DDR5 memory,
  and is factory overclocked with clocks of 1100 MHz core
  and memory clocks 1300 MHz (5.2 GB/s into force) to deliver excellent performance
  Work or play with multiple monitors is becoming more and more popular.

  Windows experience index note my video card with a fat score 7.6

  and NOW windows 7 64 bit is tell me
  that my epic video card does not support the Aero effects?

  You owe joke... !!!

  Hello Dan,.

  Thanks for posting your query in Microsoft Community.

  I understand that you get the message that the aero effects are not supported by your video card. I would help you with the question. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the edition of Windows 7 installed on your computer (Home Premium, professional, Ultimate etc.)?
  2. What is the brand and model number. your computer?
  3. What is the exact message you get?

  The question could arise if Windows 7 is not compatible with the version of the driver or if the driver you are using, in particular, does not supports the Aero effects.

  I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the next fixit and then re-run the assessment. Check if it is useful.

  Visual effects Aero Glass in Windows are not working or displayed

  If the problem persists, try the following method.

  Method 2:

  See the steps in the following Knowledge Base article and check if the question is reproduced.

  Guided Help: the problems of Aero in Windows 7

  In addition, I suggest you refer to the section: Aero material required in the following article and check if the problem persists.

  What is the Aero visual experience?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Game room requires a video card that supports shader model 3.0 your video card does not meet these requirements

  I downloaded Microsoft Games for Windows - Live. I then downloaded & installed the game games room. When I tried to play it I got this error: game room requires a video card that supports shader model 3.0 your video card does not meet these requirements: How can I fix? Will this work? http://www.download3k.com/system-utilities/system-maintenance/download-graphics-card-driver-update.html

  Hello Ann42633,

  If you have not changed the video card that you purchased your computer, you can visit the Dell Web site and use the service tag to determine the video card.

  In addition, you can locate the type of video card you have by the following text:

  -Click Start

  -Type Device Manager into the start menu search box, press enter

  -Develop graphics cards

  You must also obtain the appropriate driver from the Dell Web site and update your video card.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Used the update and now the video card is not recognized

  I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized.  I get the BIOS beep code for no video card or bad video memory.  I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
   
  System-Vista Home Premium 64-bit
  Palit-card nVidia GeForce 9600 GT graphics card

  Oh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.

  Hi JohnyDick,

  This problem seems to be due to the updates of Windows, although it could be a coincidence.
  I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
   
  If the problem persists then I recommend you to contact the computer manufacturer for assistance.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Have more themes - "graphics card does not support themes.

  original title: what happened to my themes?

  On my screen saver, I had the possibility of themes under settings, now he's gone with a message that my graphics card does not support themes, how do that back? What I have to do a restore?

  Automatically search for updates of video card on the site of the factory.

• SIM card is not supported in the activation

  I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).

  Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.

• I have connected my iphone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do?

  . I have connected my phone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do? Can I uninstall the upgrade and bring him back as it was?

  Please help my phone is now dead.

  Thank you

  Your question has already been answered twice. Asking again will not change the answer.

• I have connected my phone to itunes and it asked if I want to spend yesterday I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do?

  . I have connected my phone3g yesterday to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do? Can I uninstall the upgrade and bring him back as it was?

  Please help my phone is now dead.

  Thank you

  This is because your phone has been hacked to unlock illegally. Update caused it to relock the initial carrier. Only the carrier so that it is locked can authorize to release.

• Satellite Pro 6100 video card does not work!

  I have a Satellite pro 6100, but the video card will not work!

  Toshiba sells parts of the satellite pro 6100?

  Greetz, jeroen

  Hello

  As far as I know that Toshiba doesn't sells the parts directly and you can order it by the service partner authorized in your country.