Video chip does only not with the new monitor

Similar Questions

• Satellite Pro A10 - some keys not working only not with the new keyboard

  Hi all

  I hope some1 can help with this

  I have a Satellite Pro A10. The prob I have is a.b.n.and enter keys do not work and this is a new keyboard
  I hooked my other A10 and all keys work so the keyboard is fine.

  Everything works fine with the usb keyboard. Mother board everything seems ok.
  Any help please

  Chris...

  Post edited by: widgy

  Hello

  Why do you think the motherboard is ok?
  Maybe it s a controller keyboard problem
  Did you check if the cable is correctly connected?

  In my opinion if you are sure that the keyboard is ok 100% the problem to be attached to the motherboard because there is no other party that is placed between the keyboard and the mobo.

  Good bye

• Shared WEP not working only not with the new Inspiron laptop

  Hello

  I just bought an Inspiron laptop a few days ago. I have problems to set up my wireless network. When I change my open router for WEP connection works fine on my laptop, but when it is about shared WEP an error message saying that it was unable to connect. The thing is that I have other wireless devices on my network that only work with WEP shared. Is there anyway that I can get my laptop to support this connection? I have an Inspiron laptop with equipped with a Wireless N card.

  
  

• Maybe wireless router not working only not with the new laptop.

  I have a Cisco's Linksys wireless router. I got it for about 2 or 3 years. We bought after we bought our old laptop with Windows 7, but we have a new laptop with Windows 8. Now after about a month or two after that, we had this new laptop, the router started to turn on / turn off. What this has to do with Windows 8? I have to update the drivers of my router?

  Fine thank you. You answered a question I had. Now, I'll go find similar questions we have answered about the light that turns orange and stops flashing. Thank you once again.

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• HP f4480 has worked with dv6 but not with the new dv7 after transfer windows easy

  F4480 will not be printed with the new laptop dv7, I can scan to laptop and the printer works with the old dv6 but it will not print and shows no errors. Print jobs just disappear.

  Have reinstalled several times with the removal of the pilot tool and all the info on this site.

  Me using fixed http://support.hp.com/us-en/document/c02554863 of HP diagnostic tools

  A rather well hidden resource.

• 926 elders does not not with the new laptop Dell (17 series) on Windows 8.1

  Any suggestions for a new multifunction printer that would be compatible with Windows 8.1? I am on a budget and do not have the print/scanning of the needs that exceed the 4-5 pages per month. Thank you.

  Samin06,

  No guarantee that it will work, but some people have gotten their printer to work.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers Vista for Windows 32-bit 8.1 or the 64-bit of Windows Vista 64-bit drivers to 8.1. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 926 Photo all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications. If you have not installed one, Windows Defender is the default value. Try to read...

  Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• Gallery of Photoshop filters work only not with the "Unable to complete the operation" error box for PS CS6, CC, CC14, CC15 in Yosemite Mac, is produced in the Chinese version

  Hi all

  All Photoshop CS6, CC, CC14 CC15 have been updated in the latest version today. But the latest patch still does not fix the bug.

  Photoshop (Chinese simplified and Chinese traditional), just goes to show error message "Could not complete the operation" every time I click on a gallery of filters option. The issue started happening Mac Yosemite 10.10.2. No question too with the Mac version before 10.10.2.

  Version on Windows, it is normal, not this issue. I also tried using another language version of Photoshop, like English, it is normal without any problems. I also asked my Korean friend to use the software in Korean, no question too with Gallery of filters. But when I changed the language in traditional Chinese or simplified Chinese, the Gallery of filters will suddenly be not work with error "Can not complete the operation". When I change Photoshop to the other language, it will run normally.

  
  

  Here is the screenshot to understand clearly what I mean. It is not gray, it is not an accident. No crash no report at all. It simply doesn't get it.
  

  

  

  

  The problem occurs in ANY kind of file, it is not the specific problem of files.

  Remove the preferences, running file at startup, new account admin, uninstaller + Running cleaning tool + reinstall again, everything that I have tried and it solve anything. Therefore, it is not the machine question or account number. It also happens to other Mac Yosemite as well. In the past, there was no question too (before 10.10.2).

  In the internet (the Chinese language forums), there are many users who are also reports on the same subject, but still no solution so far.

  
  

  Below link, there is also another Chinese user who reported the same issue, but no response (I think because there is no problem in the English version, so that the staff of Adobe don't know what exactly, we face to)
  

  PHOTOSHOP CC 2014 - Chinese version traditional to the function of filter Gallery, unable to work on MAC OSX 10.10.2

  It is without doubt a BUG!

  
  

  I don't know the reason to find Mac Yosemite or because of defects in Photoshop. However, please solve the problem as soon as POSSIBLE because not all customers can understand English, especially us who comes from countries whose inhabitants do not speak English.

  * Sorry for the bad English, I spent hours just to write this post

  Hi all

  There is a patch to update to solve this problem

  http://blogs.Adobe.com/Crawlspace/2015/08/Photoshop-CC-2015-0-1-update-now-available.html

  I installed the update patch, and the problem is fixed in Photoshop CC2015 for Chinese version traditional & Chinese simplified.

  But the update patch is only for the PS CC2015 version, which means the question always remains CS6 and CC CC2014.

  At least, you can use your Chinese version of CC2015 first.

  However, when I tried to manipulate the dat inside Photoshop CC15 file and use it in CC14, my filters CC14 Gallery can also work now. And it can also solve the problem in CC PS too

• Problem with the connection works only not with the caterers

  I have a weird problem with logging, and perhaps someone here can point me in the right direction to watch. I have install a FileHandler customized for different newspapers. He worked for a few years. Now it no longer works. Nothing is found in the log file even if it is created.
  
  I have narrowed it down to there's a change in the JVM. If I run application under JDK 1.6.0_05 (what I had in production), it works. If I run the current JDK 1.6.0_22 application, it does not. This is on Solaris 10 and the only change I make is to change the symbolic link 'later' in ' / usr/jdk "to a JDK version or the other. It is reproducible 100% of the time. Use the old JDK and it works, use the JDK again and it's not.
  
  I'm at a loss as to what could be wrong.
  
  Here is the code which implements the Manager and associate it with the newspaper:
  
  Recorder L = Logger.getLogger (loggerName);
  If (null! = level) {}
  l.setLevel (level);
  }
  System.out.println ("logger level is" + l.getLevel ());
  If (null! = useParentHandlers) {}
  l.setUseParentHandlers (useParentHandlers);
  }
  String loggerPattern = logDir + reason;
  Manager: new = FileHandler (loggerPattern, limit, count, append);
  h.setLevel (Level.ALL);
  Formatter F = new UniformLogFormatter();
  h.setFormatter (f);
  l.addHandler (h);
  Logger.info ("FileHandler added [" + loggerPattern + ",]" + limit + "," + count + "," + add + "] for logger:" + loggerName);
  l.info ("open log file");
  
  I see the 'open log file' but never to see any other message of the breast journal. The "server.log" sees the messages, however.
  
  Any help will be greatly appreciated.
  
  Brett

  At one point, the internals of the LogManager/writer classes have been modified so that they maintain WeakReferences for child loggers. My guess is that your code is not keep a hard reference to the logger which you set up and it becomes garbage collector more later in time (and so do not have all future messages).

• Remote control not working only not with the G10

  Hello
  my remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up

  Hello

  Have you installed any other tools or utilities, or have you changed a few settings?
  As far as I know you need the infrared receiver only to control the MCE Win.
  The receiver is plugged into the USB port. Please check in Device Manager if the receiver is recognized. Also, check the cable of the infrared transmitter is also related.
  However, if you are working with the Qosmio player receiver should be removed from the unit.

  Moreover, in the user manual, you can find useful information about the remote control

  Best regards

• CP3525n no Ethernet does work even with the new Council of the trainer.

  Hello. I have a HP CP3525n. There is no seeing or the answer whether when I connect to the ethernet port on the printer. The original formatter Board is CE859-60001.

  I ordered a new one at HP, CE859-60002, but I guess it should be entirely compatible even the chips on it have the same model. There is still no light from the Ethernet port, after the use of different cables which work fine on my PC.

  I've updated the firmware to the latest version (via USB cable). I printed the entire tree for the printer and I see not all parameters associated with the networking (usually have access to them on the network).

  I don't have an EIO card, but I suppose it should not be necessary (?). There is a small sign on the back of the printer that I can open to peak inside the printer to see the internal Board, nothing look damaged, but perhaps its something in there that is damaged causing the Ethernet to not work even with a new trainer Council?

  I solved the problem, it was very easy. Just had to hold the "Check" button while the printer is switch on and wait three led flash, then on LAN on-board.

  Now, I'm having a problem with a HP 4250. It has a Board which have no ethernet. I traded with another Board that performs on the first boot I think the built-in JetDirect menu. But he has been on static IP so I switched it to DHCP, then transformed it works. Next time, it lit, the built-in JetDirect menu disappeared. Even the secret menu at the start of the printer, there is no option to turn on the LAN. Even the Ethernet port is turned on.

  I have the HP 4250 updated to the latest firmware from here and it doesn't help. I have a feeling that this firmware has no network feature perhaps?

• validation of single key works only not with the update

  Hi all

  I use jdeveloper 12 c on windows internet explore.

  I'm at the following link

  http://www.gabrielsideras.com/2010/09/28/ADF-unique-key-validation/

  It works only if I insert new records. After the update, it does not work. He leaves me no update.

  How to work around it please?

  Kind regards.

  User, tell us your exact jdev version, please!

  It works if yo udefine the unique key in the DB?

  Timo

• Serial number work only not with the production studio update

  I have an old WinXP with the first Adobe CS Production Studio Premium I've used for more than six years.

  I recently had to reinstall the system and now I have a facility with serial number error.  The Prod Studio Prem is an upgrade
  the standard of the video Collection. It errors on the screen when it asks for the previous version of AfterEffect and again.

  I had this problem before. Adobe support gave me another number and it worked.

  The strange thing is the installation requires AE 3.0 or later and I am AE6.5. It asks also for still 1.0 or later, and I still have 1.0 and 1.5. If I remember several years back when I called ADOBE support, they said that even if I qualified for the upgrade of the question probably has been with the previous standard AE did not work serial number in the Setup screen. I lost the new serial numbers now and I can't reinstall.

  I'm not upgraded until next year. How can I get this working right down here?

  If you don't have the old version installed you will be asked for both the serial number of the previous version and the upgrade.  You must use the correct soap operas when prompted.

• How to connect to _old_ Sync one and only device with the new operating system

  Howdy,

  I own a "device" (laptop) and have used Sync to store my bookmarks and passwords online as a way of not having to worry about backups for these courses of frequent relocations due to the OS-experiences etc.

  Yesterday, my HARD drive crashed hard, so I set up another and a new OS installed (Qubes R2).

  Now costs 32 FireFox that accompanies the installation won't let me not reconnect to my old data synchronization.

  No other devices available (or systems USB - life) with recently synchronized data locally.

  It seems to me strange _VERY_ that due to certain policies to force people to start using an account of FireFox, I must now be deprived of my current Favorites and passwords, even if I _DO_ toxic Apple bite and create an account.

  WTF is the logic here?

  See you soon,.
  Pudsy

  The 'logic' is that Sync has always intended to be used to synchronize several installations of Firefox, never to be used as a 'backup service' as you did. Plus the fact that the transition to the new version of sync with Firefox accounts, started 5 months ago (for users of the Release - version and about a year for pre-release nightly testers).

  You can try to install a version of Firefox 28 [or an earlier version] of Firefox and see if you can connect to synchronize to recover your data.

  I do you, you can upgrade to Firefox 32 and then update your sync account.
  Synchronize your bookmarks Firefox, history, passwords, etc.