Video controls to manage playback of all?

Similar Questions

• Flash videos (youtube and vimeo, incorporate or not) do not play even if the controls indicate that playback is in progress.

  As YouTube and Vimeo 41.0 videos do not play even if the video controls show that reading is current. True to embed, Facebook and YouTube pages. On Youtube, video will buffer to 100% but will not play again. First frame of the video is visible at a time, but remains a fixed image. FlashBlock is installed but disabled.

  On YouTube, if you click on the pause button, and then click the play button, the video then play? (I have not checked on Vimeo yet.)

  If so, you can have the autoplay disabled HTML5 videos. From 41 of Firefox, it's more effective than in previous versions because reading is blocked, but there is the strange display of the pause key and the buffer file.

  To check this setting:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the media and make a pause so that the list is filtered

  (3) if the preference media.autoplay.enabled is in bold and 'game of the user' to false, you can double-click it to restore the default value true and see if that fixes it

• Audio & video controls on Satellite A50

  Hi all

  Anyone got any ideas how to get the audio/video controls to work on my satellite A50?

  They do not seem to work with any of my media players i.e. wmp10, nero, power dvd...

  Anyone got an idea as to this driver, I need to make them work.

  P.S.: They worked, but after that I formatted the disc they stopped so obviously im missing pilot.

  Also I don't have the recovery disks. Is this downloadable from anywhere?

  Thank you

  Hello

  You must download the tools for the buttons on the Toshiba site. With this tool, you can activate the buttons.

  Just look at this site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Search for your machine, please select your operating system and download the appropriate tools (should be "touching a launch" or "orders")
  I hope I could help

  Welcome them

• New problem with Amazon. No video control using WMP version 11.

  Thanks for your help, Meghmala.  I did what you suggested, but when I came tohttp://go.microsoft.com/FWLink?LinkID=34506 the 'UPGRADE' button was grey once again and would not work.  However, after changing the choice of two hidden files, I tried the new UNbox and - sail! -It downloaded and played videos from Amazon.  The only remaining problem is the following: videos of the Amazon are such that they can also be played in Windows Media Player.  I have WMP version 11 from the XP platform.  Videos actually work in WMP version 11, but the video controls (brightness, contrast, color, Tint) don't work - BUT ONLY WITH THE AMAZON of VIDEOS.  Otherwise, the video controls work fine with all my other videos.  By 'do not work', I mean that when I try to drag the pointers to a new value, they suddenly go back to the center position by s.  Any help here?  Thank you!

  Samhrutha - It seems that the problem was with Amazon.  I downloaded the videos WMP 11 wouldn't play correctly, i.e. with the video controls not working not properly, the simplest and most obvious way.  An Amazon representative suggested that I download them a more roundabout way (a lot more), so I did.  Now, WMP 11, they play very well.  Thanks for your help.

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• ".embed-reagent-16by9" & how control video controls.

  Hi all

  Web design is not my in fact its quite non-existent capacity, so if it seems a show strange question little patience.

  I am currently having a Web page to load with a second 3 automatic .mp4 intro clip that plays automatically. I'm using the latest version of Dreamweaver and also the command start .embed-reagent-16by9 as I want it to be sensitive in nature. Everything works fine, I can load the mp4 and it plays in the browser, but for the life of me, I can't remove video controls (I need not controls). The property bar removes the option to control the video controls. (they are for standard HTML5 video but disappear when using the method of ".embed-reagent-16by9")

  If anyone knows where the video control bit is in the code cause I can't see it.

  If that makes sense to everyone and you have one answer ID really appreciate your advice. Keep things simple but otherwise you will lose me.

  Thank you

  Use html5 tag

• Video controls does not not in IE11

  Hello

  I have a typical IE-problem: I have included some videos in my animation (in mp4, WebM and ogv) and his works well in all browsers except IE (I'm using Version 11.0.9600 on Windows 8). He plays the video, but the user cannot use the video controls.

  I tried the following remedy:

  -disable the video controls: IE shows trhem anyway (other browsers are hiding their as planned)

  -create my own video controls on board: works fine in all other browsers, IE execpt - it shows the buttons, but you cannot use them.

  -put the videos in an extra Sym

  -put the videos on a top layer...

  The problem appears during local accommodation and when I put the server, too.

  I work with the latest version of edge animate CC2015.

  I did a resaeach on google one I have tried a few solutions spooky, with no success.

  Is anyone know the problem one fashioned a solution? It would give me a better sleep at all

  THX

  BeBo

  It seems that the only answer reasonable accommodation of YouTube videos ist and nest them. It works very well in all browsers devices. And it produces less traffic on your own server, I guess.

  Maybe this solution helps a person at a given time

• Latitude E6430 - Dell control | Power Manager installs in Win7Pr6 arch - 25025 err

  Hello

  I recently bought a Dell Latiture E6430 refurbiished, who came with win7 pro x 64. As I don't have full trust in the seller, I decided to reinstall the OS from Dell (win7 pro x 64-glb Polish) DVD. Of course the drivers detected for my tag are installed (and updated by "Dell Control |") Updated".

  However, with reinstall it I lost the ability to control the way in which the battery is maintained. If I understand correctly, this must be obtained by "Dell Control | "Power Manager". Before you reinstall, it worked. But this app is not detected for my service tag. I tried to install different versions that were available for this model, including the recent

  System - Utilities_Application_3N7TV_WN32_2.1.0_A00. EXE

  System - Utilities_Application_0X5N4_WN32_2.1.1.EXE

  (w32, but both are theoretically "32-bit executables for 64-bit architecture")

  They only moved it back 25025 (unsupported system) error. Any ideas how to approach this problem?

  I suspect that this isn't a hardware problem, as the management of the battery worked before system reinstall.

  Jesse, thank you very much.

  I followed good order during my first attempt, with a significant exception - I don't have dotnet4/4.5/4.62 installed. Otherwise, the installation failed for ' Dell order | Be able to manage"and of"Dell Feature Enhancement Pack"(I have not installed one on the other, I know that they compete. I tried the latter as the first failure in the manner described - error 25025).

  I drove back to the installation of the provider (backup turned to be useful) just to find out that I have a laptop with DFEP installed, and it is this package that provided control over battery scenarios.

  So with the new installation, I've got dotnet installed, after ' DC | PM"always failed with the error 25025, but installed DFEP ok by" DC | Updated".

  It is now resolved :-)

  TLDR: to get a control over battery scenarios, first install the bios update + chipset + network drivers, and updates of windows including dotnet 4 + 4.5 + updates, then "Dell order | Updated"+ updates detected driver, then in ' DC | Updated"display all updates and install"Dell Feature Enhancement Pack Application".

• After you import the metadata from an another env, no access to the Control Center Manager

  Hello
  I work with bise1, in this setup there are main ETL OWB features only;
  I imported metadata via design-> import metadata; These metadata were exported in a different environment;
  Once imported, all seem fine, I can make changes, the center of access control manager
  then I save and exit design center; When I connect back, I have more access to the Control Center Manager, the command is dimmed.
  I re-imported 5 times already, so I only got access to the Control Center Manager, why what is happening?
  anyone ever had something similar, or perhaps you could have the indication on what is the problem?
  Thanks in advance for any advice
  Rgds

  Hello

  may be trivial, but you opened the project in the Project Explorer tree. Before that, you cannot open the Control Center Manager because it is related to a project.

  Kind regards
  Carsten.

• Equium A60-199: audio and video control buttons not working not

  Audio and video control buttons used to work for windows media player, but now they are not, I wondered if I had pressed or something changed by mistake, or maybe I need to take it to be fixed? Help, please.

  Hello

  AFAIK utility Toshiba controls must be preinstalled if you have correct functionality. Check this box on your device.

  Good bye

• Deleted HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters on accident

  I accidentally deleted HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters.  What I CAN DO! (and I did)

  You can reset it via a system restore point for System Restore feature restores the State of the registry hive affects the day and the time where that point is created in.

   

  
  --
  db·´¯`·...¸><)))º>

  .

  "Zumara97" wrote in message news: 80a52bd6-4dc3-407f-8fff-20afe2484749...

  I accidentally deleted HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters.  What I CAN DO! (and I did)

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Needing ACL Manager - Access control list manager is EOL

  Hi everyone;

  CiscoWorks access control list manager is an excellent tool for the management and optimization of the ACL (removing covered ACEs, fusion maskable ACE face beaches, covered fusion ACE port ranges, removing the redundant ACEs, deleting double ACE and ACL Hits Optimizer)

  But now, it is not available more :(

  Does anyone know any similar tool or script?

  Thank you

  As much I know there no current Cisco product specially designed to manage ACL switch, such as a point solution or a feature of a product of greater reach.

  I don't see many customers with complex or extensive ACLs on the switches and the lack of tools available on the market to manage probably reflects this observation as well.

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Its posible to stream videos in mobile office Lightroom, I all ready done from my iPad to my desktop. I just want to do the opposite.

  Its posible to stream videos in mobile office Lightroom, I all ready done from my iPad to my desktop.

  I just want to do the opposite.

  Thank you for your help...

  Hi Richard,

  Sync video Lightroom Mobile Office is not yet supported.

  Kind regards

  Claes

• Video glitch: flashing during playback multi-came

  Mac OSX Yosemite 10.10.2.  Maxed out iMac 2013.

  Latest version of Patch PP 2014.2 Adobe build 8.2.0 (65)

  I'm having a problem with my multicam.  When I perform a roll or slide edit, it causes the program monitor (which is multi-cam mode) to waver between a black screen, or a previous edition.  It won't play either when this happens.  Sometimes I can solve the problem by opening a non-multicam sequence, and then clicking back to the multicam sequence, but more often than otherwise, I must quit smoking.  In a 30 min multicam, in this case however often I have to change my tool, which can be 10 times.

  Anyone else had this?  Is my GPU on my Mac drivers?  I have no idea how to update these drivers on mac, traditionally, this is done for me through App Store and not often because the drivers are not updated as often as the Windows one.  This has never been a problem on the Mavericks.  Someone else?

  Hi Laurent,.

  Try this:

  Please go to file > project settings > General and change the rendering engine video software of Mercury playback engine only. Click Ok, and then select Remove previews.

  Let me know if it helps.

  Thank you

  Regalo