Video & imported music plays too fast

Similar Questions

• BlackBerry Smartphones music plays too fast

  I was listening music on my Blackberry and leaned on it. Somehow, I managed to make music in the fast lane so that four seconds of the song is played in a real second. I have tried everything to stop this, I have never stopped the song, played more songs, on the phone and turns off again, and again the same thing happens.

  If someone could help me, that would be fantastic because I can't really do it without my music and I use my blackberry as an ipod, so I have no other alternative.

  Hello BBUser1122,

  Welcome to the community,

  Please try to restart pull a battery i; e. While the power is on, remove the battery and wait a minimum then reinsert

  waiting for the battery of the device so that it recharges. Then take a test.

  Good luck.

  Click on as if the problem resolves.

• Video clips will play too fast in the monitor Panel

  I've been struggling for days with a problem:

  I took 3 video clips with my mobile Nokia N8 video camera.  Here in mp4 format.  When I play these HD clips on my computer it will work perfectly.  With this and with the help of Adobe first Elenents 9, I created a project.  I haven't made any manipulaion of time on these and have left in the rough.

  Seen in the editing mode they occupy on the seconds, and run in a few seconds, where, as they should be at least 4 minutes total.  I burned a DVD that confirmed they run fast.  Can someone tell me what I do wrong?

  See my response in the other post.

  BTW - until someone has replied to your message, you can always change it. In the thread pane, look to the right, more upward under Actions, and you will see the Edit thread. Who can save the double display. Now, only you, or a MOD can edit the message, and once responded to it, the Edit thread function is lost. Is the same in the responses - once answered to, Edit disappeared. In response, the button change is at bottom left of the viewing Panel.

  Good luck and hope that interpret the film will have what you need.

  Hunt

• Why my video clips will run too fast when played on the monitor Panel?

  I posted my problem earlier today, but in re-reading it maybe I didn't explain well enough.

  My main question is: "why my video clips will run too fast when played on the monitor Panel.  It comes from occurring after I selected my media in the Panel tasks and placed in the correct order in the Timeline/timeline.  I knew something was wrong when I saw that the clips did not indicate their right length when it is displayed in the timeline (scope).  They have been compressed in only a few seconds, then the clips should have at least 5 minutes.  I ran the clips in the monitor and of course they ran too fast, with a lot of jerking movements.

  3 video clips, I'm doing a PAL HD video taken with my Nokia N8 mobile video camera. Here in mp4 format. This may be a problem?  Note that when I play these individual HD clips on my computer (Windows Media Player) they work perfectly.

  After that I put the clips in my project Panel (or before in the work space organize), I have perforned no modification or manipulation of clips.  They are in their original state.

  Simply too check that the clips do not appear to be compressed, I burned a DVD, the resulting video ran in a few seconds.

  Help would be greatly appreciated.

  What is your project Preset?

  If you right click on the items in the project Panel, then choose Properties, which is displayed for the FPS?

  It could be that the FPS flag is not picked up by the GER, and if this is the case, you should be able to fix this by choosing to interpret the film and by changing the FPS to 25.

  Hope that helps and good luck,

  Hunt

• If I replace my TIFF sequence with a model of EI, the TIFF plays too fast in AE?

  In my first pro project, I have a layer with a TIFF sequence on it. The cuts in the TIFF are in correct synchronization with the music track I. If I take an article of TIFF and replace it with an AE Comp, TIFF plays too fast inside AE, and obviously because of the music track. A that someone already had this problem? There is no change in speed for the original TIFF within the first that would cause the problem.

  If someone sees this, my problem was that AE interpreted the images to the wrong frame rate. I had to right click on the computer inside the AE and interpret the images at the right pace.

• Why the videos play too fast and with no sound?

  I tried the update of flash player and that has not worked. All the other audio seems to work very well. Problem is when I try to video streams from youtube etc the video plays in fast speed and there is no audio data

  Since Youtube uses flash player for videos, completely uninstall Flash, then reinstall the latest version and see if the problem persists:

  Uninstall Flash Player | Windows:
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Install the latest version of Flash:
  http://get.Adobe.com/flashplayer/

  Installation problems | Flash Player | Windows:

  http://kb2.Adobe.com/CPS/191/tn_19166.html

• Multimedia center of Toshiba - sound to play too fast

  I recently bought a Toshiba Multimedia Center and installed on a server Dell T105 running Windows XP. The Dell server has not built into the sound card. I use the Dell machine as a server but run it as a normal computer for now.

  Playback of any type of sound or video (iTunes, Media Player, YouTube,...) starts too fast (about twice the speed). After 1-2 minutes playback slows and then runs at a normal speed.

  I uninstalled the software and Toshiba all files read correctly even if, of course, without the sound! After you have reinstalled the software, the problem appears again.

  Any suggestions would be much appreciated!

  Mate well done!
  Thanks for this post!

• Why my Ustream playing too fast?

  My Ustream plays at a speed too fast, the live feed and archives

  I believe that this forum will answer your question.

  Flash player 17.0.0.169 problems.

• Recording is playing too fast.

  Hi all and thanks in advance for any help.

  Here's my problem, I recorded an interview yesterday and I always look at the amount of time we did, it was around 14-15 min, then a few minutes later I looked and he says 4 min. so we stopped recording and he played and fast forward the audio sounds like it is in mode.

  We also recorded a few shorts pieces yesterday 1-2 minutes each, but they are good with zero problem is the audio any longer.

  no idea which can do this?

  The mixer is fine - I just wanted to check what he uses as a driver, well, it seems to me the standard Windows USB driver. It's not at all unusual, but is not an ASIO driver, so the OS could certainly get in the way of its functioning.

  After thinking about this for a while, the next thing to try is an experience, but don't worry, it won't cost you anything and often solves problems a little - and is trying to use the driver ASIO4ALL with hearing and your mixer - it needs to pick up fine. Try this and see if it makes a difference - we know resolve a number of problems before. And hey, it's free - ASIO4ALL - universal ASIO Driver

  All you have to do is install it, select in the configuration of the hardware of the hearing page, open the control panel and make sure that he saw your table of mixing. And report back...

• Exported export for DVD - video plays too fast

  Hello useful people!

  I am relatively new to first - but familiar with Final Cut. With the help of Adobe first Pro CC v8.1 on Mac.  I have a video that was filmed in 1080 p, and I took the settings for the sequence in function (or so I think).

  The video is superb in the first and I need to create DVDs to send to England (I'm American), and they should be able to play in a standard dvd player there. My understanding is that PAL would be the wisest choice for encoding. I try to keep the simple export, and I exported several times using PAL and NTSC and while audio files are fine - for PAL and NTSC, video files are significantly shorter than the actual film and plays in a kind of fast forward. First, the film plays 17 minutes, but when I open the exported .m2v files they play only at 14:33,- or that I have finally (somehow) got up to 15:00 minutes. Only 15 minutes we got of not to tweak the settings at all - on the previous, I had read somewhere to increase the bit rate and use VBR pass 2 for best results. However, 2 minutes is still a big problem.

  Here are the screenshots of the sequence settings and export settings more simple I used - example of the NTSC.

  Any help is very appreciated! Thank you

  

  

  

  I personally consider QuickTime the scourge of video production, whose use must disappear from the landscape quickly and permanently.  Try VLC instead.

  VideoLAN - official page for VLC media player, the video frame Open Source!

  I say just go ahead and the author of the disc.  Chances are good it will work correctly.

• In windows Live movie maker, my audio plays too fast, his chipmunk, but the video plays at normal speed.

  Video games and audio correctly in windows media player didn't put not in moview maker.  It is a mp4 file and made on a flip camera.  I've seen some other threads with similar questions, but do not find an answer to this problem.

  Hello mbsmith5,

  You are right in your research, that the use of cameras Flip and Windows Live Movie Maker is a problem. You can watch http://www.papajohn.org/ and on the left side, go to brands, Flip. It has lots of good information it Flip and Movie Maker.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MP3 audio files play too fast

  I have been using my Clip to listen to podcasts and audio books for a couple of years. All of a sudden all of my readers are the Chipmunks! Sound files just fine on my PC (windows 7). I've updated to 2.01.35, but the problem does not start when I did the update of the firmware.

  BTW, my music files seem to

  If you haven't already done so, first thing I would check is to look under settings-> Audiobook Options-> speed and make sure it says 'Normal', not fasting.

• No video or music, play with my laptop

  Hello world

  I have a problem with my laptop (Toshiba Satellite) with Windows 8 built in.

  Since 2 days I could not play any clip or music (Youtube, Jango radio, ecc). I also noticed that Skype no longer works, still load, but I'm not really able to connect. Explorer or Google chrome are very very slow, always showing the same error (without page, Internet Explorer not responding).

  I have a monitor of health indicating any problem whatsoever, as well as I do not download any new programs/did new things with my laptop than the ussual those.

  Could this be a virus? I really am without one I need to renew it and cannot the system screen.

  Many thanks in advance,

  Chiara

  Thanks Ken, I finally discovered that it's because of the old version of Java, but I will fix the problem anyway antivirus.

• the sound in my flash video delays and plays too late when I look at as a SWF, but plays well when w

  So, when I preview the video in the Flash document by selecting the timeline and pressing enter, the sound works fine. But when I saw the SWF or convert to MP4, the sound starts to delay and later then plays the animation. What have I done? Help, please...

  If you need your sound synchronization closely to the timeline, you must add the sound to the timeline and set its property to sync stream, no event.

• Help, please! Imported MP3 playing at twice the speed of reading!

  Hey there,

  I am a newbie. Import an MP3 to edit a music video for. Have done this process before on another project with zero problems. However on this new project, when I import the MP3 file, it plays too fast in reading. Not exactly twice the speed. It jitters and removes words and jumps back in places.

  Jesse

  Covert mp3 wav and then import into Premiere Pro.