Bit Torrent keeps windows from sleep

Similar Questions

• USB-232/4 causes Windows hang when wake from sleep

  I have a problem of resumption of the functioning of the laptop that follows "sleep" or "hibernate".

  With the connected USB-232/4, the computer does not return the Windows normally.  The display does not return (without backlight or external video output), but the LED indicators (bluetooth, disc, power, etc.) appear normal.  When I remove the USB from the USB-232/4, the display reverts immediately to the State before the mode 'sleep' activated.  Tried all 3 USB ports - all the same behavior.  No index by using the event viewer.

  Win 7 (64 bit)

  Series NI 3.7, NEITHER VISA NOR spy 2.7.2 5.0.2 MAX 4.8

  Serial port assignments seem to be OK:

  Port 1 - com15

  2 port - com9

  Port 3 - com16

  Port 4 - com8

  Any suggestions on the next steps to solve this problem?

  Thanks in advance.

  Solved the problem!

  The BIOS has a setting in the section advanced to Wake Up capability.  Compatible USB S3 Wake.  Now, the USB-232/4 is powered over the recovery of the standby mode.  When this feature is disabled, the USB-232/4 light not upon resuming from sleep mode and probably hung up the pilot, preventing a normal recovery.

• Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

  Pavilion Elite HPE-180 t, windows 7 64 bit began to stop in the past few weeks.  It seems to happen from the sleep mode.  I leave the computer for more than 20 minutes, and when I come back, it is turned off.  When I start again, I have an error message and be able to start in safe mode.  I start in normal mode and I get an error "windows has recovered from an unexpected shutdown" without solution.  I also see an action center say error - consider sending additional information about a problem with the ATI display driver (graphics card is ATI Radeon HD5450 1 GB).  When I click for the solution, says that this solution could not be downloaded.  I've updated my drivers.  I haven't added a new hardware or software.

  Thanks HardBeatZ (HP).

  I did as you suggested and I had to uninstall several times because the device picked up previous ATI vs the generic drivers.  In any case it still stop with the blue screen of death when waking from sleep mode.   Then I went back and installed the latest graphics driver from the HP site for my system. I still had a few stops.

  Then I went through all my devices and checked for latest drivers.  All said that the best version is already installed.  Then I noticed that my HP bt500 bluetooth USB 2.0 adapter had only a driver available for windows 7 32 bit (I have installed 64-bit).  I used a keyboard and bluetooth mouse.   So I unplugged the adapter and have resorted to the USB keyboard and mouse and closures of blue screen stopped.  It seems that the network card was originally wake up from its sleep.  I also disabled the reactivation of LAN in the properties of the network adapter device.

• Windows 7 not waking from sleep mode

  Hello

  Lately, my DELL Inspiron 580 (Windows Home Basic) caused problems when I try to take out the "sleep mode".

  The symptoms are:

  * Moving the mouse, the LED monitor and Tower remain 'orange '.

  * When I press a key on the keyboard, the Tower starts to emit a higher than normal Purring noise level, it seems to be the fan, but I'm not sure. Monitor LED lights too but shortly after, the monitor switches to "energy saving" mode and doesn't. The Tower continues to emit "fan noise" and its LED remains white, but it does not start, or so it seems that the monitor remains dark.

  * In this State, if the Menu button on the Dell monitor is presses pressed, it flashes a message indicating that no signals are received from the PC.

  * If I turn off the Tower, the Tower power button, and try a bit later, the PC starts, but after a few attempts.

  I would be grateful to receive advice and suggestions.

  Aksa8

  Hello Aksa,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Powers are damaged or incorrect.
  -BIOS reduces power to the port to which the input device is connected.
  -Point keyboard in Control Panel is not configured to wake the computer when you press a key on the keyboard.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  The problems of wake the computer from sleep mode
  http://Support2.Microsoft.com/kb/266283

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Information with dubbing:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• 10.11.4 position of the window off the screen after awakening from sleep + external display

  Does anyone else have problems with windows being placed off screen when waking up their MacBook Pro from sleep mode or when using an external monitor?

  I have a 15 "rMBP and regularly connect with lid closed to a Dell screen 4K P2715Q. Whenever I wake up from sleep, many of my windows are off-center and move the windows from the edge of the rightmost to the Center.

  I can't say with certainty if it is specific to the application or for all windows, but Mail.app and Messages certainly do.

  I will do some tests later and post updates. Thank you!

  Hello

  I take this in system preferences > displays the mirror effect is on?

  What resolutions are two screens to?

  How to wake up the laptop from sleep?

  If it is by lifting the lid is on the Mac you see it?

  If it's the position carries no report available to the larger screen?  (i.e. If the laptop could match the larger screen resolution would be the 'shift' appear in the same place, as the laptop was a cut from the larger screen).

  In system preferences > displays which is the screen to 'drive '?

  

  21:17 Wednesday. May 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Hello

  I have 2 laptops Toshiba, Qosmio X 300 - 14U and Satellite T130 - 12 K, and my question is:
  I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Thanks in advance

  Hi frakri,

  What drivers tell you exactly? Display, chipset, sound, etc. ?

  Theoretically, it should be possible, but it s according to the material. For example if your Qosmio has the same chipset as satellite you can use these drivers. Otherwise it wouldn't work because the hardware is different.
  First, check the features!

  In addition, you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• 10 updated Windows now HP Pavilion won't wake up from sleep

  Since I upgraded to W10 this week, my laptop now wake from sleep.  I searched on the net and so far cannot find people having problems with their laptop in standby.  I followed the advice of one of those on the HP forum, update a driver, that I thought could not wrong.  It made no difference, however.

  When I come to wake my computer, which was always simply lifting the lid, now nothing.  The power indicator lights up in solid and wifi lights up orange (as opposed to his usual white solid while the machine is running).  Other than that, noting.  No tapping of pressing or screen button any it will not bring to life, and the only solution is to hold down the power button to force a complete stop and start again.

  Can be only 3 days into it, but it's already driving me crazy.

  Any suggestions welcome!

  Thank you

  Julie

  It is the way I got it to work.

  I made an iso of windows 10 Microsoft windows 8 and then downloaded factory restore and reinstalled.

  Yes, you will need to first save since you do a factory restore, but so far, he awakens from his sleep when the lid is opened or closed. Also seems faster start and stops correctly also, something he didn't have before. I did not try to roll back to 8 because I've heard of problems this. Don't know if it works for everyone, but it did for me. I hope for good. Will make it count if it changes so no one loses time try.

• Bluetooth is not ready after waking from sleep on Windows 7

  After updating my Tecra M10 Windows Vista x 64 Enterprise to Windows 7 x 64 enterprise, sometimes, when I wake up the laptop from sleep, Bluetooth is not ready.

  Hibernation does not solve the problem, he needs a reset which is a problem for me because I usually have a lot of open applications.
  In this case, the only Bluetooth devices in Device Manager are:

  * Bluetooth RFCOMM
  * Bluetooth USB Controller-5 at TOSHIBA

  When everything works well, the Bluetooth devices in Device Manager are:

  * Bluetooth RFBUS
  * Bluetooth RFCOMM
  * Bluetooth RFHID
  * Bluetooth USB Controller-5 at TOSHIBA

  How can I restart Bluetooth without having to restart the entire system? Turn wireless on and off the silder side does not work.

  Thank you
  Paulo Morgado

  Thanks for sharing!

• Fingerprint reader not working not not upon awakening from sleep for the windows login

  Hello
  I have a new T540P with a validity fingerprint reader.

  About 80% of the time, the fingerprint reader does not meet the windows login screen after the wake up the computer from sleep mode. It works 100% of the time when starting from a stop position, however. Once connected, it also works 100% of the time. The question arises when you log in to windows.

  I tried many things

  -uninstallation/installation of the device in the Device Manager and finger print manager pro software

  -prints of setting through two fingerprint Manager software pro (lenovo) OR through the windows built in options of the control panel of the fingerprints

  -disabling "allow windows to turn off this device to save power" in Device Manager.

  Thus, I must say that I have an another T540P I ordered as a replacement. Both models encounter the same problem.

  Is it a matter of broad platform affecting all models of T540P? It's frusterating.

  
  

• Flex 10 wake up from sleep with Windows 8.1 problem

  I installed Windows 8.1 but have a problem with the wake up the computer from sleep mode. Someone else the problem?

  
  

• PC HP ENVY 15 x 360: Notebook wake from sleep after upgrade Windows 10

  Upgrade to Windows 10 in late July-(I should have known mieux qu'àle niveau puisque j'ai eu un an pour le faire). -now computer laptop won't wake sleep withoout a button hard shutdown and reboot.

  Have followed the instructions on the HP keyboard activation Web site, allowing you to wake from sleep, bios update and to automatic updates for windows and HP.

  Please help, it's crazy to restart my laptop every time I walk away from it for awhile.

  Product number: G6T85UA #ABA
  BIOS:F.26-01/19/2015
  Keyboard Review: 89.23
  Total memory: 8.00 GB
  Name:Intel (R) processor Core i7-4510U CPU @ 2.00GHz

  Check out this post and see if it will apply/help to:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/how-to-resolve-post-Windows-10-upgrade-issues-on-HP-laptops/m-p/5209825/highlight/true#M309942

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• Laptop with Windows 7 not waking from sleep mode-impossible to repair the files

  My laptop has been not wake sleep for the last days. I think it may have something to do with a recent update. I ran scan SFC who originally gave me the error "Windows resource protection could not perform the requested operation." After using "chkdsk /f/r" the SFC scan was able to complete and it finds corrupted files. Here's what she has (don't know if files below are the same):

  2015-02-24 22:37:35, CSI Info 0000010b transaction [SR] beginning verify and repair

  2015-02-24 22:37:47, Info CSI 0000010 d [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011a [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011b [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:37:57, CSI Info 0000011e [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  2015-02-24 22:44:04, CSI Info 000001e5 transaction [SR] beginning verify and repair
  2015-02-24 22:44:07, 000001e7 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001e9 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001ea CSI Info [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:44:07, 000001ed CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  Any help would be great!

  Hi Esque,

  Thank you for the information.

  Please let us know if you have followed the troubleshooting procedures provided in the response ofVitoux K replied on 6 March 2014. (given in my previous post)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-wake-the-computer-from-sleep-mode/6054e168-6f56-43A9-a8c1-5a01e9a288fc

  If the problem persists, suggestions, please follow the link above and let us know the results.

• Windows does not wake up from sleep/hibernate implementation using the mouse button, doesn't work by using the Start button

  Windows used to wake from sleep with the return key or the mouse, now needs to press the Start button on the desktop every time.  I have not changed anything.

  that's happened?   can anyone help?

  Please click the Start button, type security in the search field and then click on "check the status of security" in the list.

  What do you see? make a screenshot of it + post here.

  For example, I have Microsoft Security Essentials and I see:

  

  What do you see when you click on "View installed antispyware programs? Make a screenshot + post.

  For example, I see:

  

  How to include a screenshot, see: http://answers.microsoft.com/en-us/windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476a-85a6-b021181be7e4

  What is the exact name of your Bullguard product?

  Please try to be as specific as possible in your answers, right? :-)

• I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install.

  Windows Easy Transfer of 64-bit to 32-bit, or vice versa

  Hello

  I'm trying to fix my settings my current machien to a W7 VM user to make sure that I have the transfer settings and I get all the information I want.  My machine is 64 bit, but the VM is 32-bit.  I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install...

  How I have a 64-bit Windows 7 Easy Transfer to install and if I get one to install and build a transfer saved the data file has there 'restore' on a 32-bit Windows?

  George George P Botuwell, programmer

  Hi George P Boutwell,.

  Thank you for using answers Forum.

  I think that VMware has a 64-bit/function version. You will need to contact them to verify this.
  64-bit to 32-bit is not supported by Windows Easy Transfer, as far as I know.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.