Video laptop G72 dies after start upward

Similar Questions

• iPhone 6s turns off after start upward with 30% of remaining battery

  6 s iPhone will turn off after starting with30% battery left please help

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• HP Windows 7 home prem OA: my laptop won't come out of sleep mode after starting upwards!

  Hello I have a HP Windows 7 home prem AO. And I can't raise the lap top the sleep mod after departure. I tried rebooting with the removable battery according to the HP video help. But it does not help me I done all I can! If anyone can help me please!

  Hi there @Zotya15,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the computer not to wake. I'll be happy to help you.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  I will do everything I can to help to get more information.

• Tecra A4 - freezing / crashing after start upward

  Hello

  My Tecra A4 is nearly 3 years old and over the weekend, it just started to freeze within minutes of the start.
  The point at which the machine crashes seems to be when all the various treatments start are completed. The hard drive seems to be stopped and at that time there it freezes.

  I managed to make it work for more than start a full crawl. Sounds weird I know, but as long as the hard drive is active the machine seems ok.
  It is still then up to a point and freezes leaving me with the only option of the laptop off the power by pressing the power button. Oddly enough, I didn't press the power button I have to just tap on it and the machine switches off completely. The longest, I got it to work for since is so fortunately I managed to copy 20 minutes on all my photos etc.

  I thought to try the recovery disk, but as I'm not sure why it freezes so I do not know if this will help?

  Any thoughts would be greatly appreciated.

  Mark

  No one will be able to say exactly why your laptop freezes.
  Perhaps only the operating system is confused upward and therefore, it does not work properly. This should be checked permanently.

  But in my opinion, the laptop crashes because of the higher internal temperature.
  Perhaps the highest temp affect that the memory modules and this would lead to these symptoms of the computer.

  I had something like that on my old laptop and one of the modules was of damage due to heat.
  I replaced the modules of memory, clean the cooling fans and fans using a jet of compressed air and the laptop works fine now.

  In your case perhaps only cooling grids cleaning would be necessary.

  Check it out!

• Pavilion G6 1010SA: Blank screen after start upward

  Unless I leave my laptop on sleep I get the following problem: when I then start it starts (power light & fan on and I hear cd rom as it starts) but there is no display on the screen at all, it is only black. Either by the way, the blue light caps lock shift flashes once every five seconds then stops, then continues the cycle. I went through all the normal fixes (remove the battery press button start for 30 sec etc etc no luck) and after perseveering attempts of 40 or 50 by pressing F8 repeatedly at the start I finally get a result.  and I am offered beginning of normal startup mode / safe etc. and then windows 7 log on screen performance. Evertime I get the screen back, I noticed that the date is returned in May 2009. Other small things like no sound setting when I click on the desktop icon are also apparent. Restore to an earlier time makes a difference in the way.

  Is this all along the CMOS battery? I know it's in a nearly inaccessible spot on this laptop!

  Also, I tried to reload the BIOS on the HP site but it has no effect (despite the fact that there is an update this year apparently).

  Insyde F52 05/15/2012.

  Help?

  Hi @WaterlooSunset ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion g6-1010sa Notebook and the problems dated back to 2009. Try to check the RTC battery. Could be low and causing the time clock (RTC) incorrect real which would cause the error of the internal battery. Here is a document to show you how you can replace that.

  Hope this helps you.

  Thank you.

• Laptop keeps freezing after starting

  My laptop (HP pavilion tx2500) keeps freezing after the start, there is no error message warning that the thing just crashes without warning moments after startup, someone had this problem and know how to solve this problem.

  It could be a number of things, then we should try to eliminate some. Try to enter the HP utilities but endearing running tests of disk and tape on the F10 key, I think and hard memory.  Try to run Notepad without the battery installed and just the power adapter.  Try to use one piece of memory and try the two slots. Then try the other room and try the two slots.  If you don't have that one piece of memory, at least try the other location.  Try a hard reset:

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01684768&product=1132551

• Why my App tab disappears after starting upwards?

  I tried to set up Twitter on a tab App, but every morning after startup, I have to restore. I use CCleaner at the start, but cannot understand the cookies to keep (if this is the solution).

  (PIN) App tabs and groups of tabs (Panorama) are stored in session data [1] in the sessionstore.js file [2] in the Firefox profile folder [3].

  • [1] http://kb.mozillazine.org/Session_Restore
  • [2] http://kb.mozillazine.org/sessionstore.js
  • [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox

  Make sure that you do not remove the navigation, search and download history on Firefox to clear the browsing history when you close Firefox.

  If you like CCleaner cleaning software, then make sure that the Session is disabled in the parameters of the Firefox application.

• DON'T LOG ON THE SCREEN AFTER STARTING UPWARDS

  Hello

  When I woke up, my computer was in hibernation, and then when I turned it on, everything was different, including my personal settings. Then I started to download my themes because I couldn't find my personal stuff. Then I managed to get my themes, I rebooted my computer, and then all my personal stuff was back to normal. I had downloaded a log on-screen softwear before restarting the PC.

  After the reboot, everything worked well. So I decided to restart, just to make sure that everything is fine, then it starts up normally and loads normally well, but after that the screen is not black, no log on screen for detection of face or password. I've been close and turn my PC for the last two hours and nothing has changed, please help, I have a request that I need to present and I need your help

  Try the system restore / repair my computer:
  http://Windows.Microsoft.com/en-GB/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  http://Windows.Microsoft.com/en-GB/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

• Computer laptop HP G60 after start questions

  I hope that one of the experts are able to help with my problem.

  Laptop is about 4 years old.  It starts normally but then frozen until I made a forced stop.  When restarting it says Windows does not start and I need to perform a startup repair.

  Like others, I had a list of options, including a complete system restore, but I don't want to do this without exploring all the options.  I tried to restore to a different point, but it does not work.

  Finished the Startup Repair and it said to restart... didn't work.  Done this 5 times with the same result.

  I read another post to enter the Bios and test on the memory and the hard drive:

  Memory - past

  Hard drive - Fail #1-07

  The question is, now what?

  Hello

  4 years is probably somewhere near the life expectancy of a mechanical HARD drive, but there is no hard and fast - rule some may fail much sooner, while others may still be Ok 8 years +.

  As long as the HARD drive has not failed completely, here are some options that you can try to recover your data.

  1. one possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  2 another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Regarding replacing the HDD - the reader at the link below is an example of one that would be perfect for your laptop.

  Hard drive 320 GB

  The procedure to replace the hard drive is detailed from Page 51 in your & Maintenance Guide.

  It does not resemble HP stock still the recovery media for your laptop, but it's always worth calling them just in case where - contact HP here.

  It can also be useful calling 3rd party reseller on the link below, even if the Nr gives no results.

  http://www.computersurgeons.com/SearchProducts.aspx

  Kind regards

  DP - K

• Unexpected file appears after starting upwards

  When I boot my MBP 13 "(mi-2012), (OS X 10.11.3), a file text without be invited (in TextEdit) comes up with the following message"

  = ' synertek | KTM | synertek380 | Synertek ktm 3/80 tubeless terminal Pˇˇ ˇˇˇˇˇˇˇˇˇˇ ˇˇˇˇ ˇˇˇˇˇˇ! ˇˇˇˇ #ˇˇ % K J = p1% ' "% + %%c p2 ' ' % + %c

  Someone has an idea of what's going on and how I get rid of him?

  You can google synertek380 to start to get a glimpse.

  Run Linix or an emulator on your machine?

  / usr/share/terminfo/s/synertek380

  http://osr507doc.SCO.com/en/man/HTML.M/terminals.M.html

• Adobe Creative cloud slows mac after starting upwards

  Everytime I turn on my Macbook Pro, it takes about 15 minutes to open any application of CC Adobe (InDesign, Photoshop, Illustrator etc) and then when they open they run very slowly and are very agitated for 20 minutes, then it seems to run ok for the rest of the day. It's extremely frustrating, especially since it happens also on three of the four iMac that I have in my office, so early in the day, we cannot do anything at almost 9:30 - 10: 00 which is losing my work time and upset my clients.

  As I say, it seems to happen on my macbook at home and three other iMacs at my desk, this isn't a hardware problem.

  I looked on forums and people have advised it is a problem of sync to kernel or something to do with file synchronization, but I shot everything that stop and turned it off in the system main preferernces > Panel Extensions as well as in Creative Cloud Desktop preferences, but it always seems to happen. I also disconnected cloud creative and reconnected again, but nothing changes. I also deleted the com.adobe.acc.plist of my "library > preferences but nothing has changed." I tried to uninstall Adobe Creative Cloud Desktop, but it wouldn't let me, saying that other applications required, so before uninstalling the entire suite Adobe to my machine I don't know what to do.

  Any suggestions?

  Please discuss with us the Assistance of Adobe as we engineers support over there.

  Concerning

  Stéphane

• Crashing immediately after starting

  Hello

  My computer crashes immediately after start upward. Sometimes I have the chance to actually click on something, but usually it will freeze just upward before I can do anything whatsoever. I'm running it in SafeMode right now and it works completely fine. Any ideas on what I can do?

  Follow these steps to exclude material failures.
   
  Type of memory in the start search box, and choose Diagnostic memory. This will
  take a few minutes.
   
  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
  --
  ..
  --
  "Casey Polon" wrote in message news: ee0fe058-d881-40f3-a9ef-c2c0ae5d0936...
  > Hello,
  >
  > My computer crashes immediately after start upward. Sometimes, I had the chance
  > actually click on anything, but more often it just freeze before
  > I can do anything. I'm running it in safe mode now and it works
  > quite well. Any ideas on what I can do?
  >
   
   

• HP laptop G72: no sound on the tv when streaming movies, videos, etc.

  Audio works on my HP laptop, but when I stream from the internet there is no sound coming through my TV with HDMI connection.

  Hi @7delnann7,.

  Thank you for your query.

  I understand that after upgrading to Windows 10 you don't have audio when the flow from the Internet to your TV via an HDMI connection.

  You did all your Windows updates?

  Have you ran the Windows troubleshooting tool?

  Here is a link for laptops HP - troubleshooting HDMI screen and sound Issues with steps to try.

  If you like get help please provide your exact model of laptop G72.

  
  

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

  Good luck!

• PC does not start upward after being low consumption mode. seeing any food is yellow and nothing is on the monitor

  After being in mode low power for a few hours, the pc does not start upward.

  the led on is yellow instead of green and the monitor displays no signal. It is a dell 4700

  Windows xp home

  Obviously, it's a hardware problem. Unplug the computer from the power outlet. Press and hold the power button for 5 seconds. Let the computer unplugged for a few minutes then re-connect-the and try to turn it on.

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul