Computer laptop HP G60 after start questions

Similar Questions

• Computer laptop screen locked after trying to download a free drawing software now can not deactivate or close the screen

  computer laptop screen locked after trying to download free software for drawing fast vector engineer tools and now the break is unable to calculate or close the screen

  Thank you

  Bill

  If your computer is bad, you need to do a system restore. Since it seems that you can not stop, try to hold the power button until it turns off. If this does not work, unplug (if laptop, remove the battery).

  From there on, allows to do a restore:

  1. turn the computer on and start to tap F8 to get the start menu
  2. Select repair your computer
  3. Select System Restore
  4. Follow the prompts

  If the restore point is older, feel free to use the Scan for affected programs feature to make sure that no other programs are affected. Otherwise, I would make a note of it, as it will have to reinstall these programs. In addition, I was running updated Windows once your system working again, since you will most likely use a restore point set up just before an update. (no point in re-opening of a security breach)

• HP G60 4440us: computer laptop HP G60 will not start in safe mode

  My laptop starts and the sceen is on the side and the cursor is frozen. I tried to hit the ctrl and alt and arrow button but nothing happened. Impossible to get in the Manager of tasks either. I tried to start up in safe mode but the up arrow does not either. Help, please.

  I got it to work! Have no idea of what I did, but the screen is entered on the side and then back to normal... will run some anti viral software and hope that everything will be good.

• Computer laptop Sony Vaio after upgrade to Windows 8 screen appears Dim

  * Original title: laptop Sony Vaio upgrade to Windows 8

  Since I've upgraded to Windows 8, my screen on my Sony notebook is very low. I went on the Sony website, and he recommended that I have not upgraded to Windows 8. Too late! What should I do to fix this?  I have a Sony Vaio VPCS111FM. Thank you!

  Good morning Sonu,

   
  Thanks for posting your query in Microsoft Community.
   
  I'm sorry to know that you are facing problems with the Sun computer screens after upgrade to Windows 8
   
  I imagine how it could be frustrating when things do not work as expected.
   
  We will try the following methods and check if it helps.
   
  Method 1: Enable adaptive brightness and see if brightness improves:
   
  1. press Windows + X key together on the keyboard button.
  2. Select Control Panel.
  3. click on power under Control Panel Options.
  4. Select the settings of under balanced plan.
  5. click on change advanced power settings.
  6 expand the view.
  7. turn on the Enable Adaptive brightness.
   
  If this method does not improve the brightness of the screen, turn off Adaptive brightness allow once again.
   
  Method 2: If you still face the question, I suggest to download graphics drivers on the manufacturer's Web site and follow the link below and install the drivers of graphics card in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Additional reference:

  If the problem persists check the link below and follow the suggestions of Miguel

  Sony VAIO - hardware & networking community
  http://community.Sony.com/T5/VAIO-hardware-networking/VAIO-VPCS111FM-display/TD-p/62019
   
  Hope this information helps, just reply to the State of the question to get help.

• Computer laptop HP G60-230US, - power connector inside the computer laptop seems to be losing

  HP G60-230US laptop

  I started to notice that my laptop power connection has been a little lost; a little later, I needed to play a bit with the connection so that the power would not disconnect; now, it seems that something got completely lost inside the connector and I get no power in my laptop.  How can I get this connector and replace or tighten?  I already tried to open the lid, but did not see an easy way to access it.  Thank you very much for your suggestions.

  Levega.

  Your power supply is not on the system board.

  Here's an Ebay link for your jack.

  http://www.eBay.com/ITM/HP-G60-230US-AC-DC-power-Jack-port-socket-cable-harness-/281245790468?PT=Laptop_Adapters_Chargers & Hash = item417b8e3104 #ht_101wt_1312

  Here is the link for your manual. "Page 4-46.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  I hope this helps.

  REO

• Computer laptop (A60) does not start

  Hello

  After yesterday, my laptop doesn't start when running on the battery. The software tells me that the battery is at 100% and also the battery led on the front is green, so battery should be full...
  When running with the charger there is no problem.

  Does anyone know why this might be? And is it a hardware problem or software.

  Hello

  If the laptop is not lit power is all on battery led flashes? Have you tried to turn off the power while the laptop is running? What happens at this time?

• Pavilion g6-2320TX: computer laptop screen blank after login

  Hi all

  I have a HP pavilion 2320TX g6 and it runs on windows 8.1(64 bit) with no problems until recently.

  It was originally windows 8 and I've updated to WIN8.1 back.i 6 months have not experienced any problems.

  I don't know what happened but when I opened my laptop after the login screen, he gave me a black screen with the mouse cursor.

  I tried closing force to remove the battery and the connection but no use.

  The last time I opened (i.e. before I met this problem), I installed 2 applications KMPlayer and secure360.

  I uninstalled them both by the secure and tried boot option, but it didn't work.

  I can't even find the reason why this problem so please help me out by giving solutions for this.

  Thank you

  Concerning

  Florine

  Hello

  Try this and let me know.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  The office is now show?

  If this is the case, download Autoruns on the following link and save it in your downloads folder.

  http://download.sysinternals.com/files/Autoruns.zip

  When you have that, open your download folder, right-click on the folder zipped to Autoruns, select "extract all...". "and in the next window, click Extract.

  A new window will open displaying the extracted content.  The application you must launch is the 2nd in the list (in format autoruns 636ko) but this by right clicking on it and selecting 'Run as administrator' -click 'Yes' to the uac prompt.

  Scroll down the list until you find the entrance to RunOnce (it may well be 2 entries) and Remove the tick (s) in the box next to it.

  Restart computer and see if it boots now on the desktop.

  Best regards

  DP - K

• Computer laptop Compaq could not start

  My laptop model is Compaq Presario CQ40-502AU. I used it for over 2.5 years.

  Recently, the laptop could not start from time to time. The LED flashes to keep, but the laptop does not start.

  Referring to this article:

  http://support.HP.com/us-en/document/c01732674

  I preformed hard reset and manged to get the laptop starts. However, the problem after several days reappered and perform a hard reset is not enough to start the laptop. Sometimes, I need to do the hard reset many times to start the laptop.

  I recorded a video on the State of Flash of the LED.

  https://SkyDrive.live.com/redir.aspx?CID=4aa65a2248b908f1 & RESID = 4AA65A2248B908F1% 21412 & parid = 4AA65A2...

  I don't know if it qualifies as keeps flashing indicating the problem on my adapter?

  Someone please help me on this. Thank you!

  Greetings,

  Disconnect the power adapter and remove the battery from the laptop. Once this is done, press in and hold the power button on the PC for a minute. Only reconnect the AC adapter and try to turn the unit back on. If this problem persists, turn off the device by pressing the power button for 8 seconds. Disconnect the power adapter and the battery. Try to start the PC again.

  If the PC starts, during the Compaq logo, press the ESC key to enter the boot menu. While in the boot menu press the diagnostic mode (should be F10) and run a diagnostics of complete systems. That should tell you which device is a failure. I hope it's nothing serious, maybe a defective battery.

  If your system seems to be stable during the startup and shutdown not randomly on its own, I would try to update the BIOS once started in Windows by downloading on:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-86224-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 3973096 & sw_lang =

  Don't forget to follow directions exactly as displayed on the HP site.

  Good luck
  Brent

• my computer laptop presario won't start, the screen is black and a shrill alarm sounds when I turn it on

  My laptop is a Presario F700 l PC, Vista operating system.

  We live in Italy and service broadband and wireless local apartment acquired last week.  We also bought and installed a Canon printer.  This computer was used in Italy before.  It was purchased in 2008 and also used in Manila and Yokohama.  I just had 'set to top' and checked before leaving the United States in September.

  I do not have the complete operating manual and I know what a yellow light on the front does mean something but I have no idea what.  The computer has been acting 'strange' for about a week in which he wont 'stay' at the top of a list of e-mail, the Office does not 'click', and it activates a different screen of the selected.

  IM technologically dim and this computer is my only link with "House" and my source of planning in Italy-travel. "  Im trying not to panic.  Thanks for your suggestions.

  Thank you very much for this - it's reassuring to know the resource and quick response is there.  I had already tried a solution I found online fixed 1/2 of my questions, but feel sure that these steps will finish my dose.  Thank you very much.

• Video laptop G72 dies after start upward

  I have a G72 with the Radeon 5470 gpu.  2 days ago, my wife received a blue screen on Windows 7 x 64, stating that the driver had stopped working.  At go here the G72 not would make on the desktop without the screen goes dead.  The machine starts in safe mode fine.   I tried as much as I could think to solve this problem, but finally backed its data and restored at the factory.   The problem persisted and I ended up disabling the ATI card in the control panel.  The machine seemed to work after that.   I have begain long BONE up to current curing process.  About 2 sets of updates after Win 7 SP1 the problem came back.   I started in safe mode and checked the driver and discovered that it had been reactivated.  I tried to disable it again and reboot.  Sometimes she remains disabled through reboot, but sometimes it isn't.  At this point the machine turns to a black screen (video not only in black but dead) after that I sign.   This was without taking into account the option enable or disable the status on the ATI card.

  Then...   I tried to make another hook the operating system and got to half way through.  Installing Windows now tries to restart and after that the machine is in place, the screen goes dead.

  Any suggestions?   Is there a way to disable the card in the bios?  It can be physically removed the card?

  Thank you.

  Thanks for your help on this.  The hard reset doesn't change anything.

  After about 20 restarts, I could lift the machine with a regular VGA driver and reinstall the driver of IntelHD.  I can now go to full resolution.  I agree that the ATI card is broken.  Probably because of the heat. (just my opinion)

  For all those running in this kind of failure the key here is persistence.  Keep restarting in safe mode and disable the ATI card in Device Manager, and eventually, you will get a clean boot.  Once you have a clean boot, install your Intel drivers and be happy that you have a laptop and not a brick.

  Peace.

• computer laptop dv4 1430 cannot start window and recovery ERROR 1002

  Sorry my English not just

  I have a problem to start my laptop.

  OK, when I turn on the power it lunch START REPAIR > system recovery options > Next > Startup Repair is checking your system for ploblem >... long... when I select restart or shut down , but STILL go to > LUNCH new STARTUP REPAIR

  or when I choose the Recovery Manager >> System Recovery > factory image recovery > ERROR 1002 Please contact HP support...

  Now, I need to open the window and how to do it.

  Please take care of my issue and I hope you understand my question.

  Thank you very much

  Jak

  Hello

  This process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

  Download the file from the link below.

  Vista 64-bit

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip, when installed, right-click on the zipped folder, select extract files and then click Ok.  You should now see another folder containing the ISO file.

  You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

  Once you have created the Vista repair disk, follow the guide on the link below to see if it undertakes to repair your installation - you may need to run this several times.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html#

  Kind regards

  DP - K

• Laptop keeps freezing after starting

  My laptop (HP pavilion tx2500) keeps freezing after the start, there is no error message warning that the thing just crashes without warning moments after startup, someone had this problem and know how to solve this problem.

  It could be a number of things, then we should try to eliminate some. Try to enter the HP utilities but endearing running tests of disk and tape on the F10 key, I think and hard memory.  Try to run Notepad without the battery installed and just the power adapter.  Try to use one piece of memory and try the two slots. Then try the other room and try the two slots.  If you don't have that one piece of memory, at least try the other location.  Try a hard reset:

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01684768&product=1132551

• computer laptop 15-f305dk: support Wizard question

  HP support assistant sent me an urgent message (two exclamation points) saying "significant action" and that the windows firewall is disabled. I checked via the control panel windows firewall and it shows the windows firewall is enabled for public and private networks. Why is HP support assistant telling me that the firewall is off and windows shows the firewall on? Is the firewall enabled or not, and how can I solve this problem?

  If the control panel it shows on so it's on. Sometimes there is a little problem with the wizard help only looking for the (trial) security software that comes on many HP computers. If your machine came with McAfee or Norton Security Suite and that you have uninstalled what may be what support assistant search. Just ignore the warning - should be an option to delete or ignore.

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha