Video or background radio noise

Similar Questions

• Captured radio noise

  So, I recently did a video shoot where my wireless microphone picked up a radio throughout the entire video station. Radio noise was picked up on the L and R channels, but the audio that I want to keep was only picked up on L is it possible to isolate the R and use it as a noise print to remove two channels in order to preserve my audio? I work in the hearing CS6 thanks!

  If the signal is truly identical in both channels, you can possibly use a paste invert to remove it.  It would be experimental surgery and may not work, but it is worth checking.

  1. open the file and disable the left channel by clicking on the [L] button to the right of the waveform.

  2 Select all and copy to the Clipboard.

  3. turn again on the left channel, disable the right channel

  4. make sure that the playhead is at the very beginning of the file and select Edit > Mix Paste

  5. Select "reverse copied Audio" and click OK.

  Who should apply a signal reversed the truck radio on channel which also contains the desired signal.  If the two strings are the same, this should minimize interference.  If this isn't the case, then it will be a terrible and you need to quickly CANCEL the foregoing.

  Then, I would say that the steps above, but select the right channel and capture it as a sound impression, as you suggest.  Then turn on the left channel and open the overview and the noise reduction effect.

  If the signal is most obvious during the silence between intervening on the left lane, you might want to try the dynamic effect of transformation to create a Noise Gate, which passes only sound when it is above the level of the radio signal.  It is not the optimal solution, but we can try if none of the above suggestions is successful.

• No audio voice during playback video, only background audio

  seven media center units

  I have sound when I play a video but I have no voice actors during playback on media center or any other program such as cyberlink dvd 8 and I have tried everything I can to solve this problem but no joy!

  I just had a very similar problem, the background sound OK, (such as the sounds of the music OK) but no sound from the voice of the people as they spoke.  Sometimes the voices are very distorted and at a level very low.  In the same situation commercial ads read completely OK.  Sometimes audio information and voice played OK.

  In distress, clearing process, I have not noticed finally no audio center channel or reflex audio of my speakers, pregnant left base and right OK

  Fix - I found the 'matrix' press the option button on my 5.1 audio speaker system.  Released 'Matrix' button, audio works OK now.

  Hope that helps someone, I appreciate of course all the time other people have taken to share corrections.

• Full video of background and background width video widget

  I have a poblem with the full background video and widget video background width. Once I have a preview they do not appear. I can insert them into the canvas. I followed the tutorial, but nothing to help at the moment. I had several works already made in th epast I managed and they worked but now even these jobs they do not show that it has been done. Pls help!

  Hello

  This looks like a defect in the widget itself, I suggest that you check with the developer of the widget on this issue.

  Here is the link of contact for musegrid.com - museGrid Contact | Adobe model Muse

  Best regards

  Ankush;

• CS5 - trying to create a video menu background - rendered preview menu not to see the video, only bottom black.

  I created my own custom menu, and I'm trying to attach a .m4v video (using the selector of whip) as the background video.

  I created my menu using Photoshop, and the buttons work correctly. For the background in the Photoshop file, I created a layer named "background" and black - painted there the visible value according to the other forum posts.

  When I try to get a glimpse of the menu, it is only showing black (with the keys works properly). I saw the preview and still couldn't see any video. Help please!

  Thank you

  Rob

  Too bad, I thought of it. I used the rectangle tool to draw a black box over the entire surface, then converted the smart object layer. I'll leave this for anyone who might have encountered the same problem of beginner like me.

• Video for background menus

  Newbie: Want a standard scene as background menu for use in different movies. What I have to edit and burn to DVD for import or is there a better way? PE9 using. Sorry if this has been answered many times before. Recording in avchd.

  It's the same process. First you create your video background as a separate project and share/computer as a DV - AVI.

• How is it when videos play my computer don't know the songs or videos. It produces noise weird then plays and continues until the song or video is more

  It sounds like a voice of an alien on the part of the video and then the regular voice will play and then it continues at this rate and I can't get the videos work properly without the charger which sucks.

  Hello

  1. What is the operating system installed on your computer

  2. don't you make changes before the show?

  3. this happens with all or specific files?

  4. have you tried to play these files in another software?

  5. What is the file extension of the file that you are playing?

  6. using windows media player?

  Please provide more information about the problem you are experiencing in order to help you better.

  Please see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• Windows Media Center will not play a DVD, I get video with a loud noise and no soundtrack.

  When you try to play a DVD in Windows Media Center or media player, the video starts, but there is a loud cracking sound with no sound of music.   This Media Center has played the DVD in the past.
  My system is: Vista Home Premium
  NVIDIA GeForce 8500
  Hauppauge Win TV HVR-1600
  Realteck HD audio
  ViXS Pure TV - U 48BO
   
  I checked these devices using HP Hardware Diagnostic tools and they work.  I uninstalled the drivers and reinstalled.  Also updated all the drivers.

  Reading this forum, I tried to delete the file from library: %LOCALAPPDATA%\Microsoft\Medial Player

  So far, nothing has solved the problem.

  Thank you for your response.

  I went through the steps.  He has not fixed the problem.  The good news is that I stumbled upon a fix.  I've uninstalled and reinstalled the Realtek Audio drivers.  Which corrects the problem.

  Thank you.

• You can cut video/Erase background?

  Hi all!  I was wondering...

  I have a large sequence of my son playing football I would like to use in After Effects... can cut out you the background of the scene would be just him running the ball... If yes how?  Delete you... or you might mask the parts around him... a good tutorials out there?

  Thank you!

  Opusf15

  If you have After Effects CS4, you will need to do rotoscoping, and it's very tedious.

  If you have After Effects CS5, you can use the Roto Brush tool, which is less time consuming.

  Please, start here:

  http://blogs.Adobe.com/toddkopriva/2010/01/getting-started-with-after-EFF.html

• HP Envy: Recently upgraded to 8.1 windows, when I play the music/videos there a stuttering noise

  recently updated, since then, when I play music, it has occasional stuttering.

  My laptop has just been improved and in my opinion, he would have also lost its audio beats that was built in.

  (Not very good with computers so please explain things in simple terms)

  Thank you.

  Hi @harvingill ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your laptop HP ENVY and issues with sound quality issues.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system at the time of purchase or need to be updated.

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.

  Thank you.

• How can I fix the background noise

  I have a noise in the background that sounds like static, that is - is this not sure of, I tried to look in the back of the noise on the ground, but nothing comes up when I try to watch a video, I hear the noise and do not know what is causing, any help would be greatly appreciated

  Hello Jacqueline.

  Try this link for a series of steps to follow to get rid of background noise: http://windows.microsoft.com/en-in/windows7/how-do-i-stop-my-music-from-skipping-or-breaking-up-when-i-play-it .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Gurgling noise in Audio/video playback

  Hi, I hope someone can help any detailed instructions would be great.

  When playing audio/video, an intermittent gurgling noise (freezes too) occurs if playing stored or streaming media (audio and video) for example iTunes, YouTube, windows media player, etc..

  All solutions please share! Have already updated drivers. Contacted customer service, basically, they did the same drivers uninstalled then reinstalled does not.

  Note After searching questions, which seems to be a problem for other people too, not only of Sony. If it helps, even if the laptop is model SVT13134CXS VAIO T series 13 Touch Ultrabook.

  Thanks in advance for any ideas.

  P.S. Here's an example of how it sounds, in my opinion, it starts at about 01:30
  http://m.YouTube.com/watch?v=CF9Pvdsz0UM

  To further isolate the issue, you can run the Checkdisk utility under windows.  You can also launch the VAIO Care and use the tools in this application.  There are some hardware diagnostics, as well as the VAIO Care convenience store and one-click-care.  These tools can scan your PC and try to solve the problems.  Give it a try and see if that will make a difference.

  If my post answered your question, please mark it as "accept as a Solution.

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• How to create a website video background in Adobe Edge?

  Hello
  I have the video file on my SSD drive computer and I want to play as a backdrop on my web page (a page I created). I tried to watch this video:

  How to create a website video background in Adobe Edge animated using Edgehero - YouTube

  but I can't follow 100% what she does.

  Guide I've tried to follow is at this link: How to create A Web site video in Adobe Edge bottom animate using Edgehero - YouTube

  Steps I do in Adobe Edge animate CC

  1.) create new

  2.) I click on + sign article library > > Scripts > > add a JS of URL file...

  URL that I add is: http://www.edgehero.com/edgehero.js/1.2/edgehero_1.2_min.js  (URL is taken from site: Edgehero.js )

  I add this link:http://www.edgehero.com/edgehero.js/1.2/edgehero_1.2_min.js to box that occures after i click on Add JS File from URL

  

  3.) I go to Edgehero.js and from there i scrol down to section named as Media - video Html5 / Html5 audio
  and here I select this option:

  

  There is a code:

    // this will set the video as background of the div/rectangle
backgroundvideo_1 ='movie.mp4';
  // put new edgehero.js variables here

  4.) I go to Adobe Edge animate CC 2014 and right-click on the project and select Actions open to "Stage".

  

  and then I click on + sign and select creationComplete

  This will open the window of the scene

  Here I copy this code:
    // this will set the video as background of the div/rectangle
backgroundvideo_1 ='movie.mp4';
  // put new edgehero.js variables here

  

  5.) then I click on + sign under the library > > video

  

  and I add video to my computer disk SSD.
  Video is called as video3.mp4

  Now I eddit code in the window of the scene (see above)
  code will look like after editing like this:

  

  Can I change under the left-side px to %

  

  

  6.) then I copy the Code in step backgroundvideo_1:

  

  
  Then I select the Rectangle tool and mark the box (white box) and I click on the little icon of C
  

  And the box that takes place I type here backgroundvideo_1_mp4 autoplay
  now when I use ctrl and enter I get only a gray box that does not play video.
  What I am doing wrong?

  


  I drag and drop a video from the side straight to rectangle window and the side left, I clicked on loop playback and it started working as it should.

• Part Muse 3rd video background module using

  Hi all. I think buying this video module of bg (http://codecanyon.net/item/html5-video-youtube-background/1555660) to use for my page of destination in muse.

  SE I just paste the html/css/jquery code in the Page Properties > metadata > HTML to the head?

  I'm not a code guy.

  Thank you.

  Hello Salim,

  If it is a code related to the metadata for the page or for SEO purposes, then it should go to the 'metadata' section If it's just a video component which is not for purposes of SEO, and you just want to add to the page for visitors to be able to see it, so you must add it using the object-> the option insert the HTML in Muse.

  I hope this helps.

  See you soon

  Parikshit