Captured radio noise

Similar Questions

• Video or background radio noise

  I think I have radio or video playing at bottom, not connected to anything and the only thing I get is the music or voice

  and I can't get rid of it, it comes and goes, I've done malware scans etc, but can't seem to get rid of it can someone help me or has
  any who have the same problem and solved. Please help its driving me crazy.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Hearing won't let me capture Noiseprint or learn its model...

  The area of selection is long (I stuck two, 1 / 2 second those together) a second. Background noise should be removed in a series of interviews.

  I watched the tutorials, but nothing I try will Capture noise Print or active learning become model (not grayed out).

  Any help on this would be greatly appreciated!

  Dan

  Have you tried to actually enter the (process) noise reduction and capturing the noise print to actually within the effect (because it lets you do).  This allows you to play with things like the size of the FFT (in the Advanced menu) and which can affect how long the noise print must be.  I have no idea why this might be different, but it might be interesting to try.

  (It is the workflow, I use because I tend to want to adjust the size of the FFT a few times anyway.)

• Question about the reduction of noise/hiss & fade in and out

  Hello I am new to hearing. I use Audition CS5.5. I was wondering how I can remove the "whistling" singing (whenever the words with "s" or "EC" are sung as "silence" or "stones"). I have a multitrack project open and I have the vocal track selected, but the function "hiss reduction" Effects-> noise reduction/restoration is gray. Similarly, "noise reduction" and "capture point noise" is also grayed out (even if I have a section of the track selected with the time selection tool). Why are these unusable?

  Another question is how can I add fade in/out effects in multitrack view? I know that I can draw lines for the fade in and out while a single track is selected, but I always like to use multitrack view, while working so that I could easily move the vocals to match the music.

  Thank you.

  Noise reduction is an effect that only works in Edit/Waveform mode.  It doesn't have multitrack real-time.

  However what you're saying, your problem is the sibilance not "whistling" anyway.  Hiss reduction is there to get a constant background hissing like a pre amp out in noisy mic.  You may do better by using what is called a De-Esser which you find in the FFT filter under filters and EQ or compressor multiband in the effects of Amplitude and Compression.  I must be a bit vague because I've never bothered with CS5.5 in order to remember here is that it was these effects.

  On your other question, you have "volume envelopes" in multitrack view and can 'draw lines' it too.  If you do not get them, go to the view menu and make sure that "Show Clip Volume envelopes" is checked.

• Impression of noise at the track?

  Hello

  Is there a way to capture a noise print and apply it to an entire track in a multi-track file? If I have a hundred small files that have exactly the same BG noise enter a way back to back, BG noise should automatically reduced in each of them via a single captured noise print. Thank you.

  

  Noise reduction is a fade effect and as such cannot be performed in the waveform editing view. The only way you could NR is all files back to back mix them down in one long file which you can then process in waveform.

• DeNoiser does not alter

  The microphone I use to his past on my videos has a coherent whistle so now all the quick pieces I'm working on that, I applied the effect to the clip and it perfectly eliminates this whistling without degrading the quality of the rest of the music/song. Love solutions with a single click!

  With my latest project, when I apply the effect on the clip as usual, nothing happens. The track looks exactly the same thing if no effect has been applied. I looked for a solution and all I found were people talk of a delay to the head of their audio effect some time to analyze before kick and more later in the song. It's not my problem.

  My problem is that the effect affects any clip. When I play in the timeline, I mean no change. I did not worth trying to export because it would be useless to me if it worked. I need to hear it in playback as usual before be exported to confirm if it sounds good. Since this is the first time, it never happened and the source and the type of audio is the same as all the other projects, I can't understand why the effect sudden does nothing on this one there.

  I don't know if I spilled accidentally a setting that would make the effect doesn't so I can hear it in time real or if the project is just buggy or what. It is a project with an audio clip. I tried to apply to the track by the mixer instead, and same result. The project is also as long as all the others so I don't think it can be that he is just having a hard time to work with it.

  Any ideas on why the effect may not do anything for a particular project? It can be something simple.

  Note: Telling me to use instead of this hearing is not the right answer. I use the first. I want to know what the issue could be first.

  Have you tried to send the audio with the hiss (whether in a video file or stand alone) to Audition?

  Premiere Pro automatically retrieves an audio file in duplicate for the hearing, to avoid destroying the original sound, replacing the original sound in your Timeline.

  Once in hearing, you can try Hiss reduction (Effects > noise reduction / restoration > Hiss reduction (process)...) or capture a noise print and try the noise reduction (Effects > noise reduction / restoration > capture noise print, then the effects > noise reduction / restoration > Noise Reduction (process...).)

  All changes recorded in the hearing on the first update.

• How to reverse the auto levels to normal levels of registration?

  Hello!

  What I mean is that I have taken record with Zoom H1 and auto levels switch was accidentally on. Makes sure the parts of the recording after a pause to start too hard and then when the signal is routed to the top, makes it too quiet. It is not pleasant.

  Is there a way to equalize the recording? It's a speech and I know that this can be done using volume leveler speech, but I do not want to use it either. What interests me is that it is a way to capture a noise print or print desired audio level and then level the rest of the audio by reference to the volume of printing? In other words, reverse the effect levels automatic return to normal. Is this possible?

  Thank you!

  Sekou 108 wrote:

  I tried speech Volume Leveler, and the thing that I don't like in my particular case, it is that it amplifies the quieter signals up to the level of those stronger and that means stimulating noise. It would be nice to do the reverse, which is alleviate the stronger signals to match those quieter. Is this possible to do with the treatment of the dynamics? How to do?

  Hearing what version do you use? There are advanced options on later versions that reduce the noise.

  But what you are looking for the enemy in the treatment of the dynamics is the Expander. For example look for example the preset e. guitar Gate. It's a pretty extreme version of what you want to do, but gives you some idea where to start.

• How do you apply the effects of process to multiple Clips in a multi-track?

  A multitrack sequence has more creative, I have more than a dozen clips of a video of funeral service that needs noise reduction.

  But, because it is an effect of the process, I can only work on one clip at a time. Furthermore, I may need to apply several passages of the effect of the NR to eliminate interference without sounding weird.

  Then, how should I do this effect (and its parameters) the rest of the clips in the sequence?

  First, you can copy and paste effects (and their settings) from one clip to another. There is no such thing in hearing that I see.

  When you've captured a noise print you can save in the effect of the noise reduction. So after finding your correct for noise reduction settings, you can save them as a preset. Alternatively, you can make your adjustments to the noise reduction a favorite by clicking the star at the top of the window of effects of noise reduction and reuse it on all the other clips...

  Another way to deal with the problem is to make a mix in multitrack view in a single .wav file which you can then process all at once.

• "Capture noise Print" grayed out?

  Hi, I'm new to hearing, jumping over to use Audacity for most.

  I select at least 1 second noise on a multitrack file, and the ability to "capture noise print" is always grayed out.

  Any help would be appreciated

  Mac OS x

  Noise reduction is destructive and as such cannot be performed in the waveform display.

• Crackling / popping noises during playback of music via Bluetooth for car radio (6 s iPhone / iOS 9.2)

  Since getting my iPhone to launch 6s, I noticed that there are quite loud crackling and popping noises coming through when I listen to the Apple music in my car audio system (connected via bluetooth).  For those of you old enough to remember, it is similar to the noise that scratched used to make recordings of LP!

  Curiously, there is no problem when first to connect the iPhone to my car (a Ford S-Max).  It appears that when I get in the car for the second time - and then it stays until I have cancel the twinning of the iPhone from the car and start over.

  Interestingly, the problem is not present on my old iPhone 6 (which I still have) or 5 my wife's iPhone or iPhone 5 s son.  This makes me think that the problem is not with the car.

  As an extra touch, the iPhone 6s has been replaced by Apple because of this problem, but the alternative is to have exactly the same problems.

  I would really advice or tips that anyone of you can offer.  In addition, it would be good to hear if anyone else has experienced this problem.

  Thank you!

  Same problem here iphone6s jerking audio via bluetooth to a 2011 ford fiesta, 6s with other devices bluetooth is fine, bluetooth other phones in the car is fine (iphone5 iphone6).

• Capture from the noise of the adjacent area and apply to the uniform color fill... How?

  Hello

  CS6

  I have a space that I have to fill it with a color that is adjacent to the area of color, that I Express and need to have with this sound of colors to another it will look artificial.

  I ejecting the color and it dumped in the area I need to fill, I know there is some sort of noise from a picking area and then apply the color noise I have made by dumping the pipetee color (alt backspace) but do not remember how its done.

  I don't have enough color to use the stamp tool, sometimes if you have a large space to fill with a uniform color and only a small area of the photo with this color to use, this pipette and the corresponding sound is the best way.

  Merlin

  apply > filter > other > high pass

  What parameters within which should I use, default is 10

  It depends on the structure you want to 'catch '.

  It goes the same for the filter > other > H Offset is 0 v 0 areas Undefined chocie of transparent value, repeat edge pixels and wrap autour (he has been on the enveloping)

  To make the seams visible any setting above a few pixels should work; traditionally half liked the dimensions, but it is not really necessary to use exactly half the width and height.

  Layer > layer Style > Pattern Overlay, now it appears last in the line. What happens if I wanted a model named and made for a long time?

  Click the icon and select from the inlay.

  

  How can I use this to paint a color and have with this model that I paint?

  Paint on a layer with the Pattern Overlay (value linear light etc.)

• Help to capture the Radio group event

  Hi all
  
  I'm new to OFA. I have a requirement to hide the region on the click of a radio button. Please let me know how to handle this event of radio button in the controller. An example of code to hide a region is greatly appreciated. Thanks a lot for your help

  Hey,.

  -Mark it as correct and close... :))

  http://forums.Oracle.com/forums/Ann.jspa?annID=914

  Concerning
  Meher Irk

• Clock radio - no noise... once again!

  With the last update to 9.3, the built-in clock (part of the application of the clock) alarm no longer works! (it was working fine with 9.2.1) I searched the internet and these forums, I see that this problem arises from time to time with iOS updates.  Frankly, I find it amazing that Apple cannot fix and keep it fixed one of the main applications of the iOS platform.

  Apple, we, the users are not happy and this BUG affects millions of people!  Remedy once and for all as soon as possible!

  We would like to know when this BUG will be corrected please?

  See you soon,.

  Darren

  You do not talk with Apple here

  We are users like you

  Please provide your comments to http://www.apple.com/feedback

• CAPTURE VIDEO AND AUDIO FROM THE DESKTOP

  I USE A PAVILION DV 7-6163 WINDOWS 7 OS.

  WHEN I CAPTURE VIDEO FROM MY OFFICE, I ALSO CAPTURE ANY SOUND MY MICROPHONE PICKS UP. A COUGH OR SNEEZ. HOW TO PREVENT THIS?

  Thank you

  Its simple. DON'T cough or sneeze when you capture video.

  The laptop you have has a dual digital microphone array that has form the beam, cancellation of echo and noise suppression software support.

  Also go to control panel > programs and features, uninstall the drivers Audio IDT, restart the computer and install the drivers updated from here and see if that helps.

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye