Video performance, Windows XP and Windows 7

Similar Questions

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• No video with format supported and type MIME found 17 firefox windows xp

  my name: Kay Richards, web developer
  website:
  http://www.benefitsinc.com/beneco_webinars.html

  contains the following code in the html file:

  <video controls poster="http://www.benefitsinc.com/images/JeffPoster1.jpg" width="640" height="360">
  	<source src="http://www.benefitsinc.com/media/11_14_12_Jeff_ACA_Intro.mp4" type="video/mp4" />
      <source src="http://www.benefitsinc.com/media/11_14_12_Jeff_ACA_Intro.ogg" type="video/ogv" />
      <source src="http://www.benefitsinc.com/media/11_14_12_Jeff_ACA_Intro.webm" type="video/webm" />
      <object type="application/x-shockwave-flash" data="http://player.longtailvideo.com/player.swf" width="640" height="360">
  		<param name="movie" value="http://player.longtailvideo.com/player.swf" />
  		<param name="allowFullScreen" value="true" />
  		<param name="wmode" value="transparent" />
  		<param name="flashVars" value="controlbar=over&amp;image=http%3A%2F%2Fwww.benefitsinc.com%2Fimages%2FJeffPoster1.jpg&amp;file=http%3A%2F%2Fwww.benefitsinc.com%2Fmedia%2F11_14_12_Jeff_ACA_Intro.mp4" />
  		<img alt="Jeff Schultz" src="http://www.benefitsinc.com/images/JeffPoster1.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
  	</object>
  </video>

  Windows xp, firefox 17 (also tried windows 7)
  InMotionHosting apache server
  have added to .htaccess what follows:

  AddType video/mp4 mp4 m4v
  AddType audio/mp4 m4a
  AddType video/ogg ogv
  AddType audio/ogg ogg oga
  AddType video/webm webm

  Video works in all browsers, on ipad and iphone EXCEPT firefox
  When I comment out the line for webm it ignores the ogv file and says I need to download the video

  at this point am totally stumped.

  Thank you jsher2000! You won't believe it. There was an extra space in the name of the webm and ogg file that threw everything off. All the videos now play for all browsers
  Thank you for your patience.

• When I return in a recorded video on windows movie maker, all executives went black and have a yellow warning marker.

  When I return in a project recently recorded on windows movie maker, all executives went black and have a yellow warning marker, the sound also went but the name of the track is always above executives

  Hi steveXB,

  1. did you of recent changes on the computer?

  2. this happens with all registered projects?

  3. you have any program installed on the computer for photo editing?

  I suggest that you disable video filters windows make of film and change, if that can help.

  Change the video filter settings

  http://Windows.Microsoft.com/en-us/Windows-XP/help/MovieMaker/change-video-filter-settings

  Windows Movie Maker: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Movie-Maker/FAQ

• I have windows vista and have downloaded my videos to windows live photo gallery but cannot open my videos... can anyone help?

  I have windows vista and have downloaded my videos to windows live photo gallery but cannot open my video... it happens with met at comes with has encountered an error while loading WLX PhotoViewer.dll and cannot start error code: 0 x 80073661... what I can do to fix this?

  What is the (extension) format of video files?

• "Import pictures and videos using Windows Live Photo Gallery" option is missing from AutoPlay in Windows 7 64 bit

  I saw this question and answer:

  http://social.answers.Microsoft.com/forums/en-us/w7files/thread/5c567ab1-208D-400D-9bce-0598d43a0574

  but I think I have a more serious problem. In Windows 7 RC, when I plugged in my camera or insert a memory card, I could choose "import pictures and videos using Windows Live Photo Gallery", but in my new installation of Windows 7 RTM, on which I have installed Windows Live Photo Gallery, there is no "Import pictures and videos using Windows Live Photo Gallery" option allotted me in the list of Control Panel AutoPlay or on the AutoPlay pop-up that appears when I plug in a camera.

  How can I get that back? Without this option, I have to go through the manual steps tedious to execute WLPG and manually choose to import from there and say what is my camera. It was much better under Vista and Win7RC when I had the simple auto play option.

  My PC is running Windows 7 Professional 64-bit, but I also installed WLPG on two new computers Windows 7 Home Premium 64-bit my parents, and they have exactly the same problem. Is this a known bug? Is there a solution?

  Thanks in advance for any help you can offer!

  Hello bitoclass,

  Thank you for visiting the Microsoft answers Site.

  The Windows Live Photo Gallery import Option is not available from the AutoPlay on x 64 systems. Try the underside of work around to see this option.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.Photogallery&TID=40220862-cb07-4183-97D4-4c597ea12dac&cat=&lang=&CR=&SLOC=&p=1

  http://support.Microsoft.com/kb/967904

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  I hope this information is useful.

  Thank you

• How to export my photos and videos from Windows gallery to a removable USB device

  I want to copy or export my photos and videos from windows live gallery to a removable USB device. I am computer illiterate, so please dumb to step by step. Thank you!

  Click the Start button and click computer.

  Everything you put in your machine will be listed as a removable disk or appointed by the device,

  You can click with the right button on this list and select Paste.

  

  Click the Start button and click on the images.

  Top right, rearrange, click on the small arrow and click folder.

  It is best to copy the files under index of the files and the device will hold more data.

  

  Select one of the listed folders, and then hold down the CTRL key and press A,.

  This will select all on the page your,.

  Right click on one of the folders that is highlighted,

  Click on copy.

  Return to the screen of the computer and right click on the removable disk and select Paste.

  After the paste operation is complete,

  Right click on the device again and select eject.

  A safe to remove the device popup will appear and you can remove the device.

  If you want you can use window Photo Gallery,

  Just right click on the pictures and videos that lists all the and select copy.

  Ignore select it without arrow subfolders, that he belongs to another question.

  

• Receiver error message: "database error detected 0x800f081f" and unable to perform Windows updates.

  Original title: windows are not up-to-date

  database error found 0x800f081f do not set windows troubleshooting, that of why system undo the changes, updates are having not installed so what should I do to solve this problem?

  Hi Hassan,.

  Thanks for the updates.

  You tried to perform step 1 and step 2 provided in method 3 to check the issue?

  If you did not do the 3 method, try the steps in the same and check if that helps.

  If the problem persists, you can try the following steps and check.

  Method 1:

  You try to run a SFC scan on the computer that would be a system file corrupt on the computer search and replace.

  Use the System File Checker tool to repair missing or corrupted system files

  Method 2:

  You can run the following DISM command from an elevated command prompt and see if the patch will install after you run the DISM command.

  a. drag from the right edge of the screen and then click on Search.
  b. enter the command prompt in the search box.

  c. in the list of results, drag down on or right click command prompt, and then press or click on run as administrator.
  In the administrator command prompt window, type the following commands. Press ENTER after each command:

  DISM.exe / Online/Cleanup-image /Scanhealth
  DISM.exe / Online/Cleanup-image /Restorehealth

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• When you start Photoshop CC 2015 (Windows 7 OS) it just says: «to perform serialization, quit and restart Photoshop.»

  Hello

  can you please specify what is the solution for this problem. When you start PS CC 2015 on Windows 7 (Pro 64-bit) I always get message "to perform serialization, quit and restart Photoshop."

  Thank you for your help.

  Uros

  Hi Uros77

  Creative cloud apps do not use serial numbers. Please log out of creative cloud and sign in.sign and disconnect activate Cloud Creative applications

  See also Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Let us know if this helps

  Concerning

  Assani

• Satellite A500 - slower with videos on Windows 7

  Hi, I desperately need advice, I am 78 years old and going into the wall.

  My Satellite A500 / 03P was bought with preinstalled Vista and worked fine. My particular interest is the functioning and the creation of video clips from training for other seniors, like video purchased has worked, stutter free. I took the offer to upgrade to Windows 7 and bought the upgrade, things went quickly downhill since. Installing Windows 7 became crazy during the installation, I have to take the computer to a maintenance shop. He was returned with Windows 7 installed, but has been considerably slower with videos run from the hard drive stuttering, worse still, my connection Internet ADSL2 running about 1.25 m bits per second.

  After a while I got to service man and $ 200 later was provided with a dual boot hard drive, Windows 7 32-bit and 64-bit Windows 7. The system is practically unusable for video. I downloaded and installed all the 32 and 64-bit drivers provided by Toshiba but had to give up the 64-bit completely as unusable. I tried to install another copy of Vista Ultimate, bought for my old desktop PC, but could not get Internet to work, either directly or via the WIFI on the laptop.

  I tried to run the Toshiba on the 32-bit Windows 7, but the laptop is too slow, that even my email creeps to e-mail readere. Any advice would be most appreciated that my pension will not bear the costs of local peoples. Should I buy the Toshiba original disks and return to 'ex factory Vistor State' or what.

  Concerning
  LeslieB

  Hi Leslie,.

  I m really wondering why your A500 has so many problems with Windows 7. From my own experience I can say it s really great and better than Vista OS. I use 1.5 years now and everything is working a lot on it.

  In any case, did you check if all devices are properly installed in Device Manager and if there is no yellow exclamation?
  When you watch videos, have you selected the power profile high performance in Windows?

  > Should I buy the Toshiba original disks and return to 'ex factory Vistor State' or what.
  That would be an option, Yes.
  You don t have the Toshiba Recovery disk? If this isn't the case, you can get it from a provider of service authorized in your country.

• Satellite P100 PSPAD: could not update the BIOS 3.8 and a poor video performance

  Hello

  I have a video performance of bad quality on my machine as well as the fan power of the issues.

  To add to my frustration the WinPhlash program included in the BIOS version 3.8 empty out trying to flash which gives a PHLASHNT. SYS failed to load the message with different error codes (codes 5 and 147 depending if I launch the exe, as it is extracted from the ZIP, or run the files extracted independently).

  I checked all permissionings on the record and I definitely full control - but still a generic message of "check your accounts, if you do not have permissions please log in again!" is displayed.

  help with my problem of BIOS would be apreciated.

  [Edited by: admin on July 6, 2007 11:10]

  Hello

  but as the average it s absolutely the safest office upgrade firmware on at the level of the BACK. Or at least using the UBCD4Win, which is a beautiful cd live windows for maintenance.

  Welcome them

• video in windows media player plays upside down.how to fix

  all videos with windows media player time to down.how can I solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. what version of Windows Media Player?
  3. What is the format of the video files?

  Try the following and see if it helps.

  Method 1:

  Solve the problems of video and other media or Windows Media Player library: http://support.microsoft.com/mats/windows_media_player_diagnostic

  Method 2:

  If you still have the problem then I suggest you to perform system restore to a point when the computer was working fine.

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

• Very bad audio and video performance

  I have a Pavilion dm1 laptop running Windows 7.  When I got all first the machine audio and video performance was very good.  However, towards the end of last year the performance for audio and video has become extremely slow.  Still, the sound stutters even without video.

  I used the tools to clean the registry, updated (or verified) all drivers I can think, but nothing has not improved.

  Maybe related, but less to worry about because it is necessary that in rare occasions, boot has become very slow too.

  I think I have tracked down a part of the problem by chance.

  Normally, I start my DM1 when connected to various devices of office as keyboards etc.  These are all plugged into the USB ports.  As the boot begins there very long delays in the process.  And when the boot ends stuttering audio and video as described.  However, if no USB device is attached during the boot process, start happening quickly and the audio/video all work fine.

• video on windows movie maker problems

  I imported a music performance video compatible h264 Windows Windows Moviemaker to edit it (in a smaller video, using only a part of the longest video).  Then I edited, using the "set point of arrival" features and "set starting point.  It is then saved in a work file (wlmp), which is specific to Windows Moviemaker.  However, when I tried to "Make movie" out of it, and it is converted (I believe in mp4), for some unknown reason while the video part is missing and only now contains audio.  Do you know if I do something wrong?  This clip is long about 4.5 minutes and a live performance.  It takes about 5 minutes to convert wlmp to mp4 file, but again, it lack the video portion.  Any ideas out there?

  I imported a music performance video compatible h264 Windows Windows Moviemaker to edit it (in a smaller video, using only a part of the longest video).  Then I edited, using the "set point of arrival" features and "set starting point.  It is then saved in a work file (wlmp), which is specific to Windows Moviemaker.  However, when I tried to "Make movie" out of it, and it is converted (I believe in mp4), for some unknown reason while the video part is missing and only now contains audio.  Do you know if I do something wrong?  This clip is long about 4.5 minutes and a live performance.  It takes about 5 minutes to convert wlmp to mp4 file, but again, it lack the video portion.  Any ideas out there?

  ===================================================
  Something to try that can produce a better result.

  Rather than use the features 'set point of arrival' and 'set starting point... "
  Try splitting the video on the points where you want to begin and end
  and then delete the unwanted parts.

  If you continue to have the problem... it can be useful to convert video
  to the. Before you import into Movie Maker WMV format.

• Video problem - Windows client for ipad

  Just a quick question before I start to call technical information of collage and start asking questions about bandwidth, etc., in which case there is a simple answer.

  Is there a known issue with the video quality for calls between Skype (latest version) running on Windows 7 and an iPad? Close, I can have a conversation, but the video is usually blurred and freezes often.

  Thanks in advance.

  What version of client-side remote iPad uses?
  
  4.10 is the latest version
  http://blogs.Skype.com/2013/08/12/Skype-for-iPhone-and-iPad-version-4-10/
  
  There is no known issue between iPad and Skype on Windows. If the network connection is good, the video can be 720 p in both directions.