Video player blackBerry 10 will display the video after OS update
Just installed new update OS on my Z30. Does not open video player video but I have sound
He started working on his own
Thank you
Tags: BlackBerry Smartphones
Similar Questions
-
BlackBerry Smartphones stuck in the bootloader after March update
Hi all
I just tried to install the update of security from March to my priv, it downloaded and I confirmed to restart to install the update.
During installation, an error android icon appeared and the update stopped.
After a while, the phone has rebooted and got into the bootloader menu.
No matter what I choose here, I can't do that.
What can I do?
Thank you & best regards,
Michael
My colleague let me know that you are all fixed to the top! Thanks again for posting @meberhardt
If someone has this problem please call BlackBerry support using the contact information in my signature and let know me via private message of your # case if I can help!
-
My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?
Brand: HP
Type: laptopModel No.: Pavilion zt3000512 MB DDR1 RAMThank you very much!Hi Dominic,
Are you able to get into BIOS to make changes?
If so, you can try to reset the default settings of the BIOS and check.
NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.
-
Computer will display the text but not the graphics
I have a computer that is running Windows 7 Pro 64 bit that will display the text, but will not be graphic print (what I get is several pages of garbled text and what looks like Morse code).
The problem is the same with a HP Officejet Pro 6230 or an Officejet Pro 8100.
The problem occurs if I am connected with a domain users account or the local administrator account.
The problem occurs using the re-discovery of HP network port monitor or the standard TCP/IP port.
Two other computers connected to the printer and also running Windows 7 Pro 64 bit, you do not have the problem.
HP printing and doctor Scan didn't find any problem and is not the problem of printer Microsoft Fixit fix anything.
I will try to assign another driver by following the instructions at:
but I do not know what driver to use.
This Technet article:
suggests that a third-party port monitor may be to blame. I tried to remove the rediscovery of HP Network Monitor, but I get an error and I can't remove it. As far as I can tell, this is the third port only installed on the computer monitor.
I have searched this forum, but could not find a similar problem that has a solution.
What other information should I provide?
Thank you!
Jeffrey Pike
Groton public library
ELSA:
Further investigation of this issue today, I learned that probably, printing problems don't were not due to the computer or printer, but a bad pass that the computer is plugged into. I ordered a new switch, and I hope that it will be the end of my troubles. Thank you for the help that is available to you.
Jeffrey Pike
Groton public library
-
My network printer will display the test in Windows 7 page, but nothing else. It is a Brother MFC-440CN
Hi djmatthewlee
1. How is the printer connected to the network?
2. is the printer directly connected to the Windows 7 computer?
3. do you have the updated drivers installed for the printer?You can refer to the link below and use the printer troubleshooter. See if it resolves the issues -
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterYou can also check out the link below:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-printI hope this helps.
-
BlackBerry Z10 always display the digital line above keyboard
Hello
Does anyone know where can I configure my blackberry to always display the keyboard with the numeric keys?
By default:
Desired (not only with the password fields, but everywhere):
Thank you!
There are no parameters to the keyboard and language for including the number bar.
Would be impractical, with the bar higher than that, it would take more than half of the screen.
-
is it possible to write a script that will display the script files folder in the tree
is it possible to write a script that will display the script files folder in the tree
Yes :-)
In your previous post, someone suggested to search for the file "SnpCreateTreeview.jsx", because it would just be the asked.
The script can be found here, just accept the EULA and download the example scripts of Bridge CS3. (For some reason it is not in CS4 samples because as far as I know)
Here's a version with small changes, it is up to you to point the script in the folder 'root' right, because this is, needless to C: on PC:
////////////////////////////////////////////////////////////////////////////
ADOBE SYSTEMS INCORPORATED
Copyright 2007 Adobe Systems Incorporated
All rights reserved
//
NOTE: Adobe permits you to use, modify, and distribute this file according to the
the terms of the Adobe license agreement accompanying it. If you received this file from one
source other than Adobe, then your use, modification or distribution of it is required in advance
written permission from Adobe.
//////////////////////////////////////////////////////////////////////////////**
@fileoverview shows how to use an item in the tree list and how to capture events with
functions of recall or script registered event listeners.
@class shows how to use an item in the tree list and how to capture events with
functions of recall or script registered event listeners.Its use
- Run the extract in the ExtendScript Toolkit (see Readme.txt).
- Enlarge / reduce the list items
- Check the JavaScript Console to see the events captured by the elements of the TreeView.
- Run the extract in the ExtendScript Toolkit (see Readme.txt).
-
What specific products are part of the complete abo for cs5-client, which will be the price after one year and will be the rice price information early enough to cancel the contract? Best regards Jürgen
For details please see the link below:
Pricing plans and creative Cloud membership | Adobe Creative Cloud
Otherwise, you can reach the Adobe sales as well.
-
How can I fix my dvd player so it will play the DVD
I ordered a new DVD player on amazon, he came straight from China. Now it will not read the dvd. and there is no region tab change the region in the dvd drive properties.
Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.
Hello
Check with the support of creating DVDs, their online documentation and drivers.
Troubleshooting and ask questions in the forums about known problems. Don check
for Windows 10 compatibility.Click with the right button on the Start button CD/DVD Player - Device Manager - double click
the player - driver tab - click on Uninstall - then OK - reboot the computer for
reload the driver. If no help go back and try to update driver, and then click OK.More troubleshooting.
1. control - troubleshooting - hardware and audio Panel - configuration of a device.
See if this resolution of the problems of aid.
2 Panel - Device Manager - DVD-CD drivers - right click on the disk -
Driver tab - uninstall the drive - and then restart the computer3 see if this helps:
FIX: DVD drive not detected in Windows 8/10
http://www.intowindows.com/fix-DVD-drive-not-detected-in-Windows-8/=====================
If necessary we will test the CD/DVD player to see if it works at all:
Try this to see if the drive is viable at all (you will need to make of these on)
another computer since your willingness not to not start - XP, Vista, 7, 8/8.1 or 10
(or even under Linux is not serious). You can also try to start with
another drive in Windows - any OS but do not use it to try to repairs
unless it's absolutely the same version of Windows on your system - just
start to see if the drive works. You can even make a boot Windows 10 DVD
disk by running the creation of Windows Media tool (on any computer)-Tool for creating Windows Media (make 32 or 64 the two same disk as the operating system
the version you are using.
http://www.Microsoft.com/en-us/software-download/Windows10/ Settings (BIOS/CMOS) often F2 then watch the display as launch you - set
the order of boot on CD/DVD first. Don't forget to when.Or ry boot from a Linux boot disk.
If the player does not start to these then there no or there is other equipment
problems that affect it. However, even it doesn't start that does not mean there is
other functions not possible some hardware problems affect the reader.Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.htmlSystem Rescue CD
http://SysRescCd.org/Main_PageScan a Windows PC for viruses from a Ubuntu Live CD
http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computerCheck the wiring of course that nothing is not loose.
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Pavilion Sleekbook 15 will display the menu boot usb. Restarts continuously.
Hello
I have a HP Pavilion Sleekbook 15 (model: 15-b022es) in which I am tryig to install Linux.
Since the day that I bought it, I was unable to boot anything directly via USB. I searched a lot on this subject, and the usual causes are order secure boot devices to boot, or Legacy Support options. This certainly isn't the case, since I tried all possible combinations. In fact, the exact symptoms that presents my laptop are not described anywhere I've found. What is:
If I insert a USB drive into any port of the laptop, it makes the computer completely unable to boot. It is not that it freezes, it restarts again and again, but never goes beyond a black screen and make a few sounds HDD (usual start of sounds, nothing weird). In this State, with again inserted USB, I can access the configuration of the BIOS by pressing F10, but can't access devices (usually available at F9) Start menu, because pressing F9 just causes a new reboot.
In the past I've accessed the start menu do not insert any USB and then pressing F9 then I walked into the USB port, entered and left some folder random to force a refresh of the display (and therefore show the USB) and finally selected my USB. It's a bit hacky and I can cease to apply this solution, as my HARD drive is now cleared and there is no file I can enter to refresh the screen and display the USB.
Now the thing is: I can not install any operating system to my laptop if I can't boot from USB, so how can I do? For now, all I get are continuous resets the machine before you get to the boot menu.
And what is the cause of all these resets? Maybe if I go out, I can imagine a way around this problem.
Thanks for the quick reply, but this isn't the problem, I had already tried.
I can handle the start menu until I do not start the computer with a USB stick inserted. If I insert one, it will prevent F9 to enter the boot menu, causing the machine to restart again indefinitely.
However, after having tried everything I could think of (even different file formats in diferent USB drives and for different configurations of BIOS), I went paranoid and I tried with every USB that I have at home.
I was able to start successfully with a Toshiba 8 GB fat32-formatted USB key (I tried with other pendrives fat32).
So, finally, it seems to me that it is a bug in my computer EFI firmware. In the first place, the incomplatibility seems to be a bad transposition a standard on the side of various manufacturers of USB key or on the side of HP. But in any case, continuous restarts instead of an information on the error message (as happens for some other errors) seems to be a bug to me behavior.
-
bar code will not print even if it will advance a label with nothing on it and display the test devices and printers page, it worked on windows XP, then I downloade on new probook with windows 7 and this is what I have. Thank you
Hi Rob,
Welcome to the Microsoft Community Forums.
According to the description, it seems that you are facing problems while trying to print the bar code using software from Dolphin fleet. I'll be happy to help you with this problem.
(1) did you do changes on the computer before this problem?
I would say to contact Dolphin fleet Software support for assistance.
https://km.Zebra.com/kb/index?page=home
I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.
-
Z10 blackBerry how to display the email address where the mail I received was sent?
Someone help please? I'm so frustrated not to see the email address where email. If that's a touch I can pull up, but I want to see anyone / anytime with a touch of the screen, or a default view adjustment.
All I get is a name, and I couldn't find anything in the settings of hub that has helped.
Anyone?
I agree, it should be easier, they could have put the email address under the name or the option of quickly... But if you drag the pop-up on the left as Jsanders mentioned, you will see the email under the name of people.
-
Z10 Z10 ILA BlackBerry does not display the name of the caller of the stored contacts.
My Z10 does not display the names of the callers stored in contacts with a prefix or area code. For example, an incoming call on contact JOHN SMITH, whose number is stored as + 44 7976 667668 shows not her name but just 07976 667668, but if the number of JOHN SMITH has been stored as 07976 667668 (without + 44) then the incoming call appears her name. Does anyone know how to remedy this? or is it a design error / omission by RIM?
This is a known issue with the software currently. Please visit KB33685
-
BlackBerry Blackberry Passport ID to the configuration after the software update
Please help
I bought a blackberry someone passport and was able to update my blackberry ID. I did a software update and the existing software was wiped out by blackberry link. Now when I try to do a Setup for the new software my ID is rejected and asking the ID used in the configuration of peripheral origin. I have more contacts of the person who sold me.
Kindly help this, thank you.
This is because the previous use had BlackBerry Protect enabled on the device.
Overview of anti-theft Protection > http://blck.by/1Ethg83
You will need to provide specific information (see below) for BlackBerry to get the camera in your full possession.
You will need to find the original seller.
(DO NOT POST SUCH INFORMATION IN THESE FORUMS)
-Your BlackBerry ID
-Proof of purchase such as a reception
-A copy of your wireless bill that shows your phone #.
-A copy of your ID issued by the GovernmentThank you!
-
BlackBerry Torch 9850 smartphones can't hold the charge after OS update
I updated my blackberry last Wednesday with the latest OS (7.1), and since then my phone will not hold a charge. I started noticing this Thursday, and it got progressively worse. A full charge will last 4 hours. I changed the battery for a new one, but nothing helped. The phone will not hold a charge. He, however, still will load with two batteries (old and new) and after it is loaded (after having been totally dead) it lights, etil connect to Blackberry desktop software. It will not just hold the load. Please help... What can I do? Note: I live in the Mexico and have no warranty, so I can't return the phone. So please, someone help with ideas that do not include getting a new phone, if possible. Thank you!!!
Hi beccaethompsonand welcome to the community of BlackBerry Support Forums!
You have applications that run in the background? Press and hold your menu on your BlackBerry® smartphone to open application selector to see what is running.
Thank you.
Description
Creates two hierarchical list of TreeView items. One is static, with a fixed set of point
nodes that you can expand and collapse. The other is dynamic; Item nodes are added and removed as
the need for a view of the file system.
The list items in the TreeView control to display the folders and files custom images. When you add items to the
TreeView list, type 'article' is used for elements of the leaf and 'node' to the elements of the container.
Dynamic TreeView captures events in two different ways. It uses callback functions to capture the
node to expand and collapse events and selection changes and also registers an event listener to
capture double-click events.
@constructor constructor
*/
#targetengine "session".
function SnpCreateTreeView()
{
/**
The context in which this code snippet can work.
@type string
*/
this.requiredContext = "\tNeed runs in the context of the Bridge\n."
/**
The location of this script file system
@type file
*/
var scriptsFile = new File($.fileName);
/**
The location of the file system resource PNG file used to represent folders
@type file
*/
this.folderIcon = new file (scriptsFile.path + "/ resources/Folder_16x16.png");
/**
The location of the file system resource PNG file used to represent files
@type file
*/
this.fileIcon = new file (scriptsFile.path + "/ resources/Story_16x16.png");
/**
The root folder that will be used for the dynamic tree
@type string
*/
this.rootFolder
If (File.fs is "Windows")
{
this.rootFolder = "C:";
}
on the other
{
this.rootFolder = ' / ';.
}
}
/**
Functional part of this code snippet. Creates the ScriptUI window and its components,
and defines the behavior.
@return true if the code snippet is executed as scheduled, false otherwise
Boolean @type
*/
SnpCreateTreeView.prototype.run = function()
{
$.writeln ("about to"run SnpCreateTreeView");
Create the window
var win = new window ("palette", "SnpCreateTreeView", undefined, {resizable: false});
Create the Committee for the static TreeView control
sPanel var = win.add ('Committee', undefined, 'TreeView Élément') static;
sPanel.alignment = ["fill",""];
sPanel.alignChildren = ["fill",""]
Create a TreeView list
sTv var = sPanel.add ("treeview");
sTv.preferredSize = (300, 200);
Add static items to the list, in a hierarchical structure.
for (var i = 0; i)<>
{
sTv.add ("node", "Item" + i);
for (var j = 0; j)<>
{
sTv.items [i] .add ("item", "Sub Item" + j);
}
}
Create the Committee for the dynamic TreeView control
var dPanel dynamic = win.add ('Committee', undefined, 'TreeView Élément');
Create a TreeView list
TV digital var = dPanel.add ("treeview", undefined);
dTv.preferredSize = (400, 300);
Create the root node element
var aNode = dTv.add ("node", "/");
Pair it with an image of the icon
aNode.image = this.folderIcon;
Define a handler for the double clicks
myOnDoubleClick = Function
{
if(e.detail == 2)
{
$.writeln ("double click");
}
}
Adds the handler as an event listener to the TreeView element.
dTv.addEventListener ("click", myOnDoubleClick);
Keep a reference to this object
var that = this;
Define an event handler for when a node is expanded
dTv.onExpand = function (point)
{
$.writeln (item.text + "is now expanded.");
nextItem var = item;
var path = "";
goUp var = true;
While (goUp)
{
path = "/" + nextItem.text + path;
nextItem = nextItem.parent;
If (instanceof TreeView nextItem)
{
goUp = false;
}
}
Remove all children of this element
item.removeAll ();
var Ref = new file (that.rootFolder + path);
If (Ref instanceof Folder)
{
children var = ref.getFiles ();
for (var i = 0; i)<>
{
If (children [i] instanceof file)
{
Item.Add ("node", children [i] p:System.NET.mail.MailAddress.DisplayName);
Item.Items [i] .image = that.folderIcon;
}
on the other
{
Item.Add ("item", children [i] p:System.NET.mail.MailAddress.DisplayName);
Item.Items [i] .image = that.fileIcon;
}
}
}
}
Define an event handler for when a node is reduced
dTv.onCollapse = function (point)
{
$.writeln (item.text + "is now reduced.");
}
Define an event handler for when the selection changes
dTv.onChange = function()
{
$.writeln ("selection changed");
}
Display the window
Win.Show ();
$.writeln ("Ran SnpCreateTreeView");
Returns true;
}
/**
"main program": construct an anonymous instance and run
as long as we are not unit - test this code snippet.
*/
If (typeof (SnpCreateTreeView_unitTest) == 'undefined') {}
new SnpCreateTreeView () .run ();
}
Maybe you are looking for
-
'Stuck' inside an application with No Way Out
I recently bought an iPad Mini 4, my first iOS device after years of Android. There is much to say about the iPad, and I can see why it has become so popular. There are things that I have to "unlearn" on Android to succeed with the iPad, and that is
-
Portege M300 - can't find WLan after installing Win XP
Hello I have formatted my system by installing the Windows XP from Toshiba recovery disc.I installed the service pack 2 of windows XP for wireless setup. But I am not able to see under network connections wireless adapter. I checked it in computer de
-
Stereo mix is available for the L300 Satellite?
Hello I've looked everywhere to see if I can learn how to get the stereo mix for the L300 and I can't seem to find something for her.Stereo mix is available with the L300 satellite?I can get it and if I can how?
-
problem connecting push2tv3000 with HP Pavilion dv7 Notebook PC QD977UA #ABA
Bought the ptv3000 and the widi recognizes the adapter and I can put in the security code, however when I click on connect the widi tv window will specify the connection to the device display wireless for a few moments and then window widi intel says
-
HI: I have problems with disk space; I went to Windows Help and read that if I go into Add/Remove programs who said I could remove programs or components of operating system I no longer use. I remove some programs that I don't use anymore, but I do n