Video ports

Similar Questions

• Bad video port, can I get an expansion card video or what I need to replace the motherboard?

  I have a Compaq SR2150NX, the monitor works on another PC, but will not be on this one, so I guess the video port is bad.

  Can I get a plug in video card and install it, or do I need to get the motherboard replaced?

  If I can get a video card, I can't know how to disable the frame on one, I need to disable or how I?

  My computer is a HP 5188-6734 motherboard and I can't find this one exactly, but I found a HP 5188-5588 one on e - bay for about $70, which seems to be and seems that I can tell, exactly like what I have.  Can I replace the one I have with this one without any problems?

  Looking for help.

  You are this posting in the wrong forum, this is a forum of the laptop and is a desktop system.

  Yes, you can get a video card, install and use it.  However, you sure is that the video works is not, or is it possible that the video didn't come out because you have a larger problem as the system's not initialization and display at all, because of a sort of failure such as food or the card mother?

  If you have a spare PSU, you can try exchanging it instead of the original.  If you have a spare video card, even a few old (especially some former) PCI worthless, that you can install to see if you get any screen output.  Note that you need to maybe use the CMOS clear jumper or remove the battery for 10 minutes, while the power supply is disconnected after adding a video card, or by deleting and trying to use the video again.

  I don't know if the specifications of the two Councils are quite similar, you should look at the datasheet for your system and compare that against what ebay sellers asking them is capable of.   Generally if you have a processor socket 775 lines they list and your using the same chipset, you should be able to simply plug in the parts and windows must be able to start pretty far to plug-and-play all the minor differences.  This is the situation in which I expected, you can buy the replacement cards model you mentioned and it works perfectly except possibly having to install a driver or two, but I can't be sure without detailed specifications.  They are very close to the info, I have found, might even be just a 2nd revision of the same Council of PCChips where everything what they changed was a clock IC generator or something similar that would not do your use in any way, except that to be sure, you have the good bios when looking on the HP site for the models with this Council in there instead of the bios for your system model #. If they take even a different bios which they cannot.

• Satellite P300-1GK - I can't use the S-video port

  Hello

  According to the specifications of the laptop, I have a S-Video output. The problem is that there is something just in front. So I can't use it. Check the picture.

  http://img220.imageshack.us/my.php?image=p1010027s.jpg

  How can I do?

  Hello

  Seems the specifications listed on the page are not entirely correct.
  Satellite P300-1GK supports TV-out but NOT s-video and Composite port!

  In addition, HDMI port output is available to connect the laptop to an LCD HDTV.
  But some other models support the s-video and that's why you can see a place for s-video port in the lid of the laptop

  I hope I could bring a precision!

  Good bye

• How to activate the S-video port on a satellite M30X 154?

  Hey does anyone know how to activate the S-video port on your laptop by Satellite SM30X-154?

  If I press the FN + 5 keys the only options I get is LCD and no S-VHS option. My TV is set up for this I have Watch DVD through the cable.

  When I connect the cable to the laptop, nothing happens!
  Help

  Hello

  Sorry, my A100 Tosh has a Geforce 7600, I don't know what is your GA.

  But on mine, I have a NVidia Control Panel, where I can configure dualview,
  normally, which allows me to choose between the builtin LCD and the external monitor (VGA Port).

  When a TV is plugged and not recognized, I can apply recognition there.
  Relative to the opening of the Panel, the TV is also available.

  Maybe I could help you.
  If this isn't the case, note that the settings of windows your TV is not available.
  Try to go to the User Interface of your graphics card...

  Matz

• Video port broken on HP Pavilion s3307c

  The video port is broken on my HP Pavilion s3307c.  So, I installed a new compatible video card, but I can't work because the bios even points to integrated rather than the video card video.

  The problem is, I can't access the bios to change to disable the on-board video settings because I have no video.

  Does anyone know of a workaround?

  Thank you very much for your help!

  Jennifer

  This is not a BIOS setting on my s3300t. The embedded video is disabled when a video card is well wedged in the PCI 16-bit (long) housing. Try re-allocation of places your card and make sure that you connect the monitor cable to a port on the new video card.

• Need help on Dell Alienware Alienware Aurora R4 video ports

  Hello

  Here's the video ports on my Dell Alienware Aurora R4. I used 2), 3) and 4) to 3 monitors. It supports 4 monitors. But I don't know what that 5) is.

  Can anyone tell me please what type of cable I need to buy?

  (1) air vent

  (2) DVI - I (used)

  (3) DVI - D (applied)

  (4) HDMI (used)

  (5) don't KNOW WHAT it IS

  

  Thank you.

  DisplayPort

• Re: Tecra A4 - can I record something due S-video port?

  Hello

  I have a s-video connector on my Tecra A4 laptop. I have it plugged into a TV decoder / recorder provided by my ISP, but I get nothing on my other than the windows desktop screen.

  I don't have a TV in the apartment where I have the internet connection if I want to use my PC to view the content and program shows that I want to record. Then I will bring the decoder / recorder at my place in the mountains where I don't have a TV but not internet access.

  Is it possible to receive the s-video on my Tecra A4 laptop screen? If so, how?
  Thank you
  Sean

  Hi Sean!

  Sorry, but the port S-video on Tecra A4 and all laptops, they are known to me are only equipped with a S-video * output * port.
  This means that you can only extend or clone display on an external monitor. It s not a port of entry where you can save something.

  If you want to save something you need to buy an external TV card. You can connect it via the USB port and the external TV card, you can connect the TV to record videos on your laptop.
  Ask your local computer dealer for this. They should be able to make an offer for it.

  Good bye

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• How to use the video port with Vista on Qosmio G30

  Im running windows vista Ultimate edition.
  How to use the monitor in port?

  The Composite (in the port monitor) port is placed to the right.
  With the video component cable software plug-in delivered a CATV or satellite box can be connected to the computer to watch channels.
  You can for example use the Qosmio Player or Windows Media Center to watch other channels.

  As much as I know the ultimate Vista supports Windows Media Center, Windows Media Center HDTV.
  You should read some more details on your new operating system!

• Unable to connect the laptop to the TV via the s-video port

  I was able to connect my PC toshiba laptop (windows XP) to our old TV using an s-video cable.
  We have improved tv to another TV (pdp-507xd) and I can't the link with the laptop.

  I tried the s-video and also a RGB. The RGB show on 'view', as if I'm linking to a PC. The s-video looks ok but no display on TV.

  I miss something really simple, but any ideas please?

  Hello

  To my knowledge on many television s-video option must be activated first.
  I put t know your TV device and I m really not a TV expert, but check the user manual and check if this option should be enabled before using it!

  Then again try the FN + F5 key combination to switch to the TV device!

  Good luck

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• How to use on the Satellite 2430-101 S-Video port?

  Hi all!

  I don't know if I'm in the right section... I have a second hand S Satellite 2430-101 and use Microsoft Windows XP. Unfortunately I can't use the s-video output, because I do not know, how should be done. Quite simply, do not attach the s-video cable to the TV worked. What do I need to enable something in Notepad? Thank you in advance

  Hello

  As Nicky said if the unit is pre-installed with recovery CD, you can use the FN + F5 key combination and switch to the external display or TV. Check also display properties > settings > advanced > nView. Control the clone and device settings option. Under device settings, you can find the device selection option.

  Good bye

• Satellite Pro A210: Black/White Photo on television when connecting to the s-video port

  When you connect my TV to my laptop using a S/video on my laptop I don't get any color on television.

  I use the Control Center ATI catylist to clone the pc on the TV.
  I have all the settings for brill ect and looks of size but i ' ts only in black and white

  Anyone who wants to help me please

  Cordially Arron

  I had the same problem on my laptop of 7 years and a TV device.
  I connected the laptop to the TV with the s-video-to-scart cable and I did only get a black and white picture on television.

  I thought that there s a problem of software/setting, but I was wrong.
  After hours of research, I discovered that the assignment of the cable pins was not correct and is not compatible with the plug SCART TV.

  I tested about 5 cables and finally among the new generations of s-video cable has been the key.

  In my opinion, you should try some cables.

  Good luck

• Video capture with a satellite Pro M70: which ports and drives can I use?

  I want to edit my home movies on my Satellite Pro M70 using WXP Pro (win dvd or movie maker). I want to capture video from my panasonic camcorder that has digital strips. What are the ports that I can use and what cables do I need? I'm desperate to edit my recent wedding video to put on DVD and mail it to my mom. The panasonic website has ignored me! Any advice anyone?

  Well, as far as I know this unit has only one S-video output port. In this case, you can connect the laptop to the TV and look at the photo of laptop to TV but it of not possible to receive all the signals of TV or any other device on your laptop.
  To receive the signals, you need a composite or a s-video port.

  However, if the camcorder has a firewire if port you can send digital files through the firewire connection. But this should only work with digital files that are saved on the camcorder.

  Please also visit these helpful sites:
  http://www.Camcorderinfo.com/content/connecting_cam_to_computer.htm
  http://www.Educ.TTU.edu/HOWTO/Vid_Room250_Connections/vid_connections.html

• Lack of Port S-video on Satellite A300

  Dear people,

  I just bought a new Toshiba Satellite A300 series that although it was announced by the end-seller and Toshiba have a S-video port between other ports, the laptop doesn't have an S-video port.

  The funny thing is that, next to the HDMI port is a circular takes place with the sign of S-video next to it, but unfortunately this circular place (looks like a stand-by) is covered by a bit of plastic without going through the real S-video port. It's like a S-video port to be there in the first place, but someone just forgot to put the real S-video port.

  Everyone knows the same problem?

  I want to thank you in advance.

  Best regards
  VassilisG.

  On some pages, you can find wrong entries, and I think that on the page you posted is error.
  I do not know what is IDEAL, but check it please official Toshiba Europe page and it is clear that your laptop model doesn't have S-video but HDMI port only.

  Good bye