Video software does not

Similar Questions

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.

• Why video player does not open in alcatel 4020d fire c

  Why iam does not open the camera and video player does not work properly please send the answer to this problem and how to reduce the iam

  Can you explain in detail what is happening?

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• I have firefox 13 and 15 but realplayer download this video option does not work, extensions to save plugin is disabled, if no videos do not play in youtube

  I have Firefox 13 and real player 15, but the download this video option does not work, under extensions to save browser plugin is disabled, but if active videos do not play in youtube, error occurs, it's major drawback, it works well with IE, but I prefer Firefox so any help to rectify the issue is appreciated.

  One possibility is to upgrade to Flash 11.2 and re - activate the Plugin RealPlayer browser Record extension in the Add-ons Manager (Tools > Modules > Extensions) (it's a softblock).

  If you need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

  You must uninstall version 11.3 Flash.

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• videos app does not show me movies and TV shows, that I recently bought.

  Hi all, I have a problem with my iPhone 6 s, the problem is that the videos app does not show me movies and TV shows, I bought a few hours ago, and I realize that my iPhone 4S has not this problem. Both have installed the latest versions of ios.

  Don't show them where? In the video application itself? Tab in iTunes purchased? If they are not downloaded, go to settings > videos > show iTunes purchases > on.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Video stream does not

  Skype has always worked well, but the other day when it crashed. I uninstalled and reinstalled but since my video stream does not work. The other person can see my video, but I do not see them, and I don't know why. I can't find anything about whether online to say why that is, if someone could help me fix this please?

  Thank you

  Looks like your graphics display driver crashes. Try to reinstall this driver:

  http://www.ASUS.com/UK/notebooks/ASUS-ZENBOOK-UX305FA/HelpDesk_Download/

  The direct link to this driver is:

  http://dlcdnet.ASUS.com/pub/ASUS/NB/DriversForWin10/VGA/VGA_Intel_Broadwell_Win10_64_VER101815424001...

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Fingerprint software does not recognize my fingerprints

  Hello

  I installed the 64-bit Windows 7 (using cd upgrade upgrade to win7 program)
  Installed all updates (windows)

  However, fingerprint software does not recognize my fingerprints-. -.
  The first two are fine, but the third party never works, it's the same story for all my fingers...

  I HAD the program works perfectly until I reinstalled my OS
  For some reason, I remember the same problem last time I had to reinstall, do not remember what I did to remedy

  any advice?
  Thank you for your time and help!

  Edit:

  To add a few details:
  It worked before
  The hardware is not the issue (he reads my fingers)
  It is software or just my DNA changes my fingerprints-. -.
  I can't remember which version of the software / I downloaded the last time, but I find the latest software online on this site and found

  In addition, the FACE program does not work either
  He was working before I reinstalled the operating system
  Is it just me or all the security programs like simply not me-. -.

  Hello

  In your case, I recommend you remove all traces of fingers first.
  Then, uninstall the software and clean the registry with CCleaner.
  Then download the new software for fingerprint for the computer laptop and Win 7
  After that, scan and configure the fingerprints once more.

  In regards to the face recognition software;
  You must uninstall this too and need to download the latest version of this software for Win 7

  Good luck

• DMM software does not.

  Why the digital multimeter (DMM) software does not work if the NI ELVISmx Instrument Launcher is?

  Initially, I installed subsequently myDAQ NI 2015 that included the NI ELVISmx Instrument Launcher containing the DMM software. Other pieces of software work however, the DMM stalls immediately after starting with a NI Instruments loading bar.

  I tried the repair option of software specifically for the NI ELVISmx driver and also tried wiping clean and reinstall fees. By receiving the same result.

  
  

• Onboard HD video cam does not

  The integrated video camear does not work although the device manager says it's working properly.  There is one of installed driver USB video camera can someone advise if this is the driver of a built-in camera? They are one and the same or would there be a shock?

  Hi Bob,

  Welcome to the Microsoft community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. don't you make changes to the computer before the show?
  2. what operating system is installed on the computer?

  I suggest you run fixit material and devices and see if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.microsoft.com/mats/hardware_device_problems/en-us.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Scanning for ScanJet G3110 software does not install

  I downloaded the latest version of the software recommended directly from the HP support site.  Operating system is Win7 64 bit. The Setup program ends in a few moments with no error message, but I don't have desktop shortcut icons. The installation program creates the folder: "C:\Program Files (x 86) \HP\" with two subfolders: 'Temp' and 'Digital Imaging '. Digital imaging files inside I can't find many application files and it is not the application of \bin\hpqkygrp.exe.

  On a pc with windows VISTA and default CD Installer evertything works very well.

  I noticed a lot of missing files from installation, as a common folder. The pc's in a network domain and I launched the configuration in the user domain and domain administrator.

  I tried several times in different days/months/updates to day... Please help.

  Just because the HP scanning software does not work I can not restore my entire system, I can't accept this as a solution.

  I tried System File Checker (0 problems) and to boot, the problem "remains the same" (see Led Zeppelin).

  I finally found a solution, I installed NAPS2, available at sourceforge.net/projects/naps2/ free scanning software.

  Best regards.

• Game room requires a video card that supports shader model 3.0 your video card does not meet these requirements

  I downloaded Microsoft Games for Windows - Live. I then downloaded & installed the game games room. When I tried to play it I got this error: game room requires a video card that supports shader model 3.0 your video card does not meet these requirements: How can I fix? Will this work? http://www.download3k.com/system-utilities/system-maintenance/download-graphics-card-driver-update.html

  Hello Ann42633,

  If you have not changed the video card that you purchased your computer, you can visit the Dell Web site and use the service tag to determine the video card.

  In addition, you can locate the type of video card you have by the following text:

  -Click Start

  -Type Device Manager into the start menu search box, press enter

  -Develop graphics cards

  You must also obtain the appropriate driver from the Dell Web site and update your video card.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.