Video stuck on 'cancelled '.

Similar Questions

• I cancelled the download of my free trial of AE and it is stuck on "Cancel"...

  I cancelled the download of my free trial of AE and it is stuck on "Cancel". I would like to restart the download. How can I do this?

  Restart your computer and run the Setup again.

• Tried to download InDesign and it's stuck saying "Cancel".

  (I use a Macbook Pro)

  I cancelled to restart and it froze because my internet is out! Restart the whole cloud does not help. Should I reinstall completely the cloud?

  Hello

  Please try to download the application directly via the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Kind regards

  Sheena

• Adobe Premiere Elements is not home a video image. Cancel the operation. (For version 3.0)

  This is the message that appears whenever I try to export my film of 6 minutes and 10 seconds. I used 2 "Video effects" and the film consists mainly of AVI files. Someone please tell me why this is happening and how I can solve this problem. Thank you very much

  This error often appears when there is a gap in the chronology of the video.

  What I would do, is to zoom in on the timeline for about the maximum. Press home to get the CTI of the 00; 00; 00; 00 point. Now click on PageDn to scroll you your Clips. With the full zoom, you should be at the level of the frame, so even a gap of 1-frame must be visible. However, sometimes even max zoom not clearly show them. What you need to do, watch ICT's measure that it progresses from clip to Clip. If it seems "hiccups", or "stutter", you've probably found your gap. In most cases, you can simply select (Lasso) all the following Clips and drag them so that the gap is closed. In some cases, you can simply change the out Point of the previous clip to close or extend the Point for the next Clip close. Be sure to check the entire timeline to learn more.

  A small caveat. If do you find the gap and clogged with the Lasso and drag method and also have a soundtrack that extends the total length of your video, check that there are NO more Audio, that you now have video. If you do, you have two choices: click-and - drag tail audio to align it with the tail of your video (only if you have a bit of silence in the audio track, or can change you slightly fade to work the way you want.) Or, you can go in the project Panel and choose the new icon, and then black Video. Drag for welding end-to-end to the tail of your last Clip, then click and drag its tail while you have perhaps a more video frame, only the Audio.

  I hope that you will be able to find a gap, and it will be the problem. As I said, it is usually the cause of this error message.

  Good luck

  Hunt

• stuck on cancelling replication task

  Spin 5.4.2.228 on carrots of source and target texts.

  The core of the source is not sow replication tasks, but the heart of target still shows one such as running with a status of "Cancel".  In this condition for a few days now.

  Short apprecovery of arrest/death on the target / source cores, what are my options for this resume?

  Thank you

  You can try the Stop-ActiveJobs command but do not know if this will help

  I'd probably do a restart of the service if possible

• AfterEffects stuck on 'Cancel' status

  I tried to download After Effects just now with a slow connection, but I had to leave the area (and put my laptop to sleep) before he could start to download (it was pending). When I opened to new creative cloud, After Effects remained like that and even after you quit and restart, nothing is changed. Things that do not have to do with the uninstall (because my connection is not the best, and I'm afraid of losing data if I have to reinstall) creative cloud? Thank you!

  

  If you have restarted your computer, and you see the same problem, follow solution 2 here:

  Desktop application Adobe Creative Cloud lists uninstalled Adobe apps as up-to-date

• DesignJet Z6100: Cancellation of work, just hangs

  I cacelled a job in the queue while in the processing stage. Now, it seems to be stuck on Cancel.  I waited for an hour, tried to restart the printer.  After restarting work goes back to the State of treatment and freezes there as well. Work done through the web interface, is not a local computer problem.

  Anyone know how to clear the cue, process, etc.?

  Fine thanks

  Hello

  Unplug the lan cable, disable the job Q and then restart the printer.

  If employment barrier once again, do a restore factory.

  Now, if you have any costume paper presets make a backup before you perform the reset

• Why my Windows 7 crash/freeze during playback of ANY video

  lets see someone can get their head around it because it's driving me around the bend.

  Then... I have a media Center PC connected to my TV high definition VGA cable. I ran the XP PC for a long time, but last December, I've upgraded to Windows 7 with my laptop.

  Mark 5 months of use of seamless media and integration of network - it worked like a dream and I played HD and SD content with ease.

  About two weeks ago, I was watching a HD ".mkv" file in Windows Media Center and Gardner ten minutes in the video, the video just file - both video and audio. I had to turn off and restart the machine and started again the video file. Five minutes after the restart the video file, it hung again (not in the same place in the video). Then, I went and watched the video on my laptop , where it worked fine.

  A few days after that (first time I had used it again since he hung up), I started to look at a folder ".avi" of sustainable development. About 1 minute in the video the screen lost its signal (come the little built in the chart 'no signal') and after 15 seconds following the audio cut out as well.

  This latter behavior that happens now whenever I try to watch any kind of video SD or HD of any file extension. This problem is also independent of what player I use (windows media Center) and windows media player classic after a minute or if the display turns off and audio quickly follows.

  Suffice it to say, I was a little annoyed but knowing a little about good the computers that I decided to try to solve the problem by taking the following measures.

  (1) I uninstalled all my codecs and reinstalled the latest version of the K-Lite Codec pack. The latest version has support for windows 7 so I doubt that it is a problem of compatibility here. After doing this the problem persist, exactly the same as before.

  (2) I checked the date of drivers for my card (nVidia MSI 6200) and saw that they were dated from September 2009. I went to the site of nVidia and found the latest drivers win7 dated April 2010 - I have installed these but the problem is still there.

  (3) I thought, maybe it's a problem with the hardware of videocard real itself. When I built my machine, the parts supplier accidentally sent me two of the same video card so I swapped the existing for a version brand new brand of the same card. The problem is always EXACTLY the same.

  So yes - I am quite annoyed and frustrated right now because I have absolutely no idea what is wrong with the machine and how she went from work not work almost from one day to the next.

  I would add also that the screen is perfect when you are doing something else on the computer - I can surf, play youtube videos, listening to music etc, and it's absolutely no problem.

  Put on a video, and it cancels to display, as I explained.

  WHY?

  halp.

  Hello
   
   
  Method 1.
  Change hardware acceleration
  You can also try to change the acceperation of material in the middle and check (you can try different)
  1. right click on an empty space on the desktop.
  2. go in the resolution of the screen.
  3. click on advanced settings, then click on the tab "troubleshooting."
  
  4. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
  Method 2.
  Uninstall video card drivers and restart the computer and let windows install the generic drivers and then check if the HD videos play fine.
  For more information see the links below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  Automatically get recommended drivers and updates for your hardware
  
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 3.
  Uninstalling and reinstalling Windows Media Player and Windows Media Center:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

   
  Note: Repeat the steps for Windows Media Center.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• weird bribe to .mxf video in some sequence settings in setting up first

  I have a big project mainly composed of .mxf files saved with a Canon xf100.  An interview in particular do this weird thing when one of the clips are placed in a timeline set as his videos, the video seems normal.  When I copy this video in another fixture with different sequence settings video appears as if the Middle vertical pixels have been stretched to the left and to the right.

  I tried to copy it to the other video content to the sequence with this one interview, and it copies correctly.  However, as soon as I click videos stuck together, I get the error seen in the third picture and closed unexpectedly on me first.

  Please see the pictures below.  All images were shot with the same camera settings and I used Media Info Mac to ensure that color space, rate, codec profile, bit depth, extension, etc. is the same.   If he has no idea why this interview has been damaged please let me know.

  

  Thank you Ann.

  I updated my drivers and nothing has changed.  In the end I just transcoded the original files in Pro Res 422 and replace the corrupted in my project files.  From and to the top!

  If anyone has this problem I'd love to hear a plausible explanation of the suggestions on how to avoid it in the future.

• I download app stuck creative cloud

  I'm trying to download after effects through my creative cloud. As a first step, that it has not yet started. I tried to cancel. Now it is stuck on Cancel. What I really want is to download the After Effects application. Help, please.

  Hello

  Please try to close the creative application Cloud via activity monitor or Task Manager and then restart it and start the download:

  See, use the monitor activity on your Mac - Apple Support , end a process - Windows help

  See also, download and install Adobe Creative Cloud apps

  Kind regards

  Bani

• Area 51 ALX video goes black once the machine is warming up

  My second question concerns the reason why this computer was good for me.

  When I first start the computer, it seems to work, but once video cards warm up (and they get really hot) video signal to cancel completely.  There is nothing to come to one of the DVI (there are 4 of them on the back of this machine, 3 active).  It will start working again after a hard reboot, but the signal is not always go to the port that I had been attached to.  In other words, I had to run after the video signal around the ports.  I also changed the power settings to prevent it from "sleep" for a long time, but this does not seem to have made all the difference.

  I updated the bios to A10 and run several diagnostics show that the system works perfectly.  The system does not respond to the keyboard, but I don't know if it is really "locked" because I networked hard drive of ALX and was able to access a computer on my network even though the screen was black.  I copied things from him and him very well and if he is really blocked, he would not have answered at all, no?

  If this sounds like something you treated, please let me know.  I have a few ideas to try this holiday weekend, but I'm open to other suggestions.  Thank you!

  I suggest that you clean and check all fans (including those on video cards) and the radiator. Yes, video cards running more hot than the CPU, but they shouldn't be hot right on the Windows desktop.

  Reposition the graphics cards, ram DIMM, all connectors power supply.

  Test until do you fail, then troubleshoot

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19530277

• Split HP 13 x 2 PC: problem of its HP Split x 2 after upgrading to win 10

  I upgraded my laptop to Win 8.1 to 10 .but I have a sound problem... sometimes I can't see the videos on Youtube, facebook... If I start a video from the video stucks and a start-up sound comes... .but the problem will automatically and back again... .This ih happening since I upgraded my laptop to win 10? is there a permanent solution

  Hey @Rdx12311,

  What happened with the troubleshooting and resetting the BIOS?

  Thank you.

• 4500 envy: Envy 4500 will not work after ink change

  I changed the ink cartridge in my HP Envy 4500.  It prints the alignment fine page.  I put on the screen to scan and it repeat me that it is «forever» scanning until I have Cancel.  Then, it is stuck on cancel until I have force a stop down.    I'm ready to take a hammer to this printer.

  Hi @Paulaayn,

  Please go on the HP Forums! I'd be happy to let you save your craving for 4500 sledge-hammering.

  I understand your printer is stuck in a mode of scanning and based on your description, it seems that it is the alignment page that didn't scan. You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  I ask because I wonder if the printer does not have enough power to run the task. If you do not have the printer connected directly to a wall jack already, we will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  Please let me know the results of your efforts, and I'll get back to you. Thank you.

• HP Photosmart C5280 All-in-one: HP Photosmart C5280 All in one will not wotk on new install

  I bought an HP Photosmart C5280 All in One several previously used and used with a dell dimension running windows xp woitout problems.  .  I rcently purchased a dell Windows 7 Professional or with a processor 15.  I reinstalled everything and get test of allignment of cartridges, and it keeps failing.  I did the partial reset and semi.  It wil not scan or copy.  Help, please.

  Hello @mgsindy,

  Thanks for getting back to me on this subject. I am pleased to hear that the issue of alignment has been resolved. However, because you get the message when copying or scanning that has occurred a "failure" and you screen gets stuck on 'Cancel' for the copy, you experience a hardware failure with your copy/scan inside your printer mechanism.

  Because the programming of your printer control the scanning/copying mechanism, I checked in an update of Firmware for your product to see if there was an update available in the corrupt case programming was causing your issue. Unfortunately, due to the age of your product, it is not these updates.

  You also mentioned that you did a semi Full reset programming on your printer, nothing helps.

  At this point, I will provide you the failure of scan standard troubleshooting steps to see if there is a chance to solve this problem.

  Step 1: Power Reset:

  1. With the printer, unplug the cable from power for 30 seconds
  2. After that 30 seconds reconnect the power cable from back in
  3. The printer should return its own
  4. Once the printer returns to the ready state, again test the copy feature.

  Step 2: Verification of power:

  Power strips and surge protectors can cause HP printers do not work properly because they can run out of power. To ensure that a power problem is not causing your Scanner failure, please plug the unit directly into the wall outlet.

  Once your printer is directly to a wall jack please test again the copy function. If the problem persists, please continue to the next step.

  Step 3: Check the Scanner Bar and light:

  1. Feed your printer
  2. Lift the lid flat on your printer and click the copy button
  3. Check if the scanner bar is moving or if the scanner lamp turns on.

  Source: A "Failure of scan" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  If there is no response from the mechanism of scanning, the last step would be the printer to service.

  At this point, if the problem persists I suggest you contact the Technical Support queue by phone to explore additional options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if the steps I have provided resolve your copy/scan failure. Good luck!

• Need advice from the scriptUI expert on the correct application of the scriptUI Photoshop dialog box

  I'm in the middle of my base obsolete flash to HTML5 version Panel port. Part of the SLA of my group, I wrote a script to create a new photoshop document, including settings for video editing. Since the Panel a separate script file called generating then a window of dialogue for user input. Once the completed script the dialog box and any reference to it has been automatically deleted.

  Because now I'm using a file single hostscript.jsx for my duties I run on issues related to the (re) opening - of the dialog box after the first time.

  The behavior is replicated better when you run the script directly in the ExtendScript Toolkit (oriented itself).

  I'm looking for someone who can give me some advice on how to implement this so that the dialog box can be called a second time without problems.

  Thanks in advance.

  Here is my script:

  Table of predefined parameters

  var vidSizes = [["HD 720 p", 1280, 720], ["HD 1080 p", 1920, 1080], ["Cineon half", 1828, 1332], ['Cineon Full', 3656, 2664], ['Film (2K)", 2048, 1556], ['Film (4K)', 4096, 3112]];

  placeholder for the sequence of AnimationProject

  tempLayer var = "";

  The window reference

  West var;

  BEGINNING OF FUNCTION-

  function makePanelWindow() {}

  value of the width of the list box and text entry

  var charWidth = 15;

  w = Window.find ("dialog", "new project");

  Alert (w);

  {if(w==null)}

  push names in the drop-down list

  var vidFormats = [];

  for (a vidSizes in var) {}

  vidFormats.push (vidSizes [a] [0])

  }

  Animation scriptingUI project settings window

  w = new window ("dialogue {text: 'The Animation project settings'} ',' new project'");

  var grName = w.add ("group");

  var _labelName = grName.add ('statictext');

  var _docName = grName.add ("edittext ', undefined,' '");

  _docName.characters = 40;

  kader owner

  var grKader = w.add ("group");

  Kader 1 ~ parameters

  var size_group = grKader.add ('Committee', undefined, 'Settings');

  size_group.alignChildren = 'right ';

  size_group. PreferredSize = ["", 160];

  drop-down list

  var grDropdown = size_group.add ('group');

  grDropdown.margins.top = 12;

  var _labelSize = grDropdown.add ('statictext');

  _size var = grDropdown.add ('dropdownlist', undefined, vidFormats);

  _size. Selection = 0;

  _size. PreferredSize = [164,22];

  field width

  var grHWidth = size_group.add ('group');

  var _labelWidth = grHWidth.add ('statictext');

  _width = grHWidth.add var ('edittext', undefined, 1280);

  _width. Characters = charWidth;

  var _labelUnit1 = grHWidth.add ('statictext');

  _labelUnit1.characters = 3;

  entry height field

  var grHeight = size_group.add ('group');

  var _labelHeight = grHeight.add ('statictext');

  _height = grHeight.add var ('edittext', undefined, 720);

  _height. Characters = charWidth;

  var _labelUnit2 = grHeight.add ('statictext');

  _labelUnit2.characters = 3;

  Framerate input field

  var grLabel = size_group.add ('group');

  var _labelFramerate = grLabel.add ('statictext');

  var _frameRate = grLabel.add ('edittext', undefined, 24);

  var _labelUnit3 = grLabel.add ('statictext');

  _labelUnit3.characters = 3;

  Kader 2 ~ Generate

  var opt_group is grKader .add ('Committee', undefined, 'Build');.

  opt_group. PreferredSize = ["", 160];

  Checkboxes

  var grCheck = opt_group.add ("group {orientation:"column", alignChildren:"gauche"}");} ")

  grCheck.margins.top = 12;

  var wantND = grCheck.add ('checkbox', undefined, 'New Document');

  wantND.value = true;

  var wantVL = grCheck.add ('checkbox', undefined, "Vidéo Layer");

  var wantVLG = grCheck.add ('checkbox', undefined, 'Group of video layers');

  Cancel and ok

  var buttons = w.add ("group");

  Buttons.Alignment = ['right', 'bottom'];

  var buttons.add = cancelButton ('button', undefined, 'Cancel', {name: 'Cancel'});

  var applyButton = buttons.add ('button', undefined, 'OK', {name: 'ok'});

  Buttons.Alignment = 'right ';

  Values of the label and the name

  _labelName.text = "name:";

  _docName.text = 'new Animation project. "

  _labelSize.text = "size:";

  _labelWidth.text = ' width: ';

  _labelUnit1.text = "px";

  _labelHeight.text = ' height: ';

  _labelUnit2.text = "px";

  _labelFramerate.text = "frame rate:"

  _labelUnit3.text = "Fps";

  // Panel Functions ----------------------------------------------------

  Behavior of the list

  _size. OnChange = function () {}

  var salt = Number (_size.selection);

  _height. Text = vidSizes [salt] [2];

  _width. Text = vidSizes [salt] [1];

  }

  OK and Cancel buttons

  applyButton.onClick = function() {}

  makeDoc();

  Return w.close ();

  }

  cancelButton.onClick = function() {}

  Return w.close ();

  }

  }

  w.Show ();

  }

  END OF FUNCTION-

  makePanelWindow();

  Patrick, try this:

  Replace

  return w.close();
  

  with

  w.close ();
  w = null;
  delete w;
  $.gc ();
  

  in your button functions.

  Hope that helps.

  --

  tomaxxi.com