Video YouTube will freeze until move you the mouse in Mozilla firefox

Similar Questions

• R60 freezes seconds after moving the mouse

  As the title says, my R60 freezes (no response from the mouse or keyboard) moving the mouse (that it either via USB mouse, touchpad or red dot-in-the-keyboard). Can I use the keyboard to navigate through the menus / use the computer normally, but as soon as I try to move the mouse, everything crashes after 2-3 seconds of movement and I have to force a shutdown, reboot and try again... same thing continues to be.

  This behavior started after I turned on my laptop this morning, after having for the night (~ 8 hours). I don't know what the cause could be because it worked perfectly normally until yesterday.

  After many gels and cold - reboot, I decided to press the ThinkVantage button a start and select "return to factory settings" to reinstall Windows. Everything went well, but as soon as I moved the mouse... you guessed it, everything froze as usual. =/

  I have no idea why this happens all of a sudden, as my laptop has been working well for about 2.5 years now. The only problem is that I have to keep plugged in to an electrical outlet whenever it is, because the battery dies, but I don't see how this would cause these repeated blockages.

  What could be the problem? I don't know what else to do because a new installation of Windows XP of course did not help. Fortunately I just build a new desktop PC is how I can even post here. =/

  Thanks in advance for any suggestions!

  -Eric

  Never mind!

  Here is the solution:

  http://Forum.NotebookReview.com/newreply.php?do=postreply&t=332545

  Anyway thanks, boards Lenovo!

• Stop wake up on the movement of the mouse

  Having put my computer to sleep every movement of the mouse wakes it. This can happen in just bumping the Office when you leave. This causes the computer to stay awake for about half an hour. I have a Microsoft wireless mouse. There is a way to stop this action or what I need to disconnect the receiver from the mouse to put the computer to sleep?

  Devices Open & Printers
  Right click on your mouse and select Properties
  Select the Hardware tab
  Click on the properties button
  Click the change settings button
  On the power management tab, uncheck the box "allow this device to wake the computer". Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• How can I trace the movements of the mouse and ignore the movements not

  I have a program that records the position of the mouse each 300 ms over a period of approximately 9 hour minute.

  However, I need to know the mouse ONLY when it is not the same now previous position (sometimes the user stops talking. I don't want to save 5 minutes from the same position of the mouse)

  Here is the original program

  var drawTimer:Timer = new Timer (300, 500000);

  drawTimer.addEventListener (TimerEvent.TIMER, timeSampler);

  function timeSampler(evt:TimerEvent):void {}

  {trace (mouseX, ', ' + mouseY);

  }

  }

  I tried to create a variable to capture the position of the mouse at a specific time

  var posMouseX:Number = mouseX;

  var posMouseY:Number = mouseY;

  and to add a conditional statement in the function

  If ((mouseX! = posMouseX) & & (mouseY! = posMouseY))
  {trace (mouseX, ', ' + mouseY) ;}}

  but I do not do this correctly because I no more than getting every movement of the mouse or none

  Can anyone suggest a better way to do it?

  Thanks in advance

  The code above can do what you want

  you will get the values only when the mouse is moved, there will be no duplicate values

  stage.addEventListener (MouseEvent.MOUSE_MOVE, onMove);

  function onMove(e:MouseEvent):void

  {

  trace (mouseX + "," + mouseY);

  Add your code here to save the values, for example:

  myArray.push (mouseX, mouseY);

  }

  as the timer still counting down and on full it will delete the scene event listener.

  var drawTimer:Timer = new Timer (300, 500000);

  drawTimer.addEventListener (TimerEvent.TIMER_COMPLETE, timeSampler);

  function timeSampler(evt:TimerEvent):void

  {

  stage.removeEventListener (MouseEvent.MOUSE_MOVE, onMove);

  }

  drawTimer.start ();

• Move the container sprite as the movement of the mouse

  Hi all

  I am developing a game where there is an object that follows the mouse. There are also other objects and a map on the screen. I feel like any content background (the entire map and other items) to move when the user moves the mouse to the left or to the right. In other words, if the user moves the mouse on the right side, then all content (with the exception of the object which moves according to the mouse) must move left so that the user can see part of the map on the right side.

  From now on, I created new sprite container in which I added all my objects and map. So when the user moves the mouse to the right, I move the container sprite to the left so that it looks like all things moves to the left. Code looks to as below

  var pt:Point = new Point (character.x, character.y);

  PT = dori.localToGlobal (pt);

  If (pt.x > (stage.width * 0.5))

  {

  Container.x-= 5;

  }

  The project structure is such that I add container directly to the stadium. and this container contains just like the card, character and other objects.

  Now the problem is that as soon as the mouse goes beyond middle of scene... it creates distance between the location of the mouse and the character... !! I mean it moves according to the mouse but some distance will be created between the mouse and character. and continues to increase this distance that I continue to move the mouse to the center of the stage!

  I'm really stuck with this problem. Please someone help with this. I hope I've explained that well. I would like to know if you need more information, but please help.

  use linear interpolation to determine how your objects should move.  for example, if when the mouse is at x = stage.stageWidth, bg should be stage.stageWidth - bg.width and when the mouse is in x = 0, bg must be 0 use:

  paramF (bg, stage.stageWidth, stage.stageWidth - bg.width, 0, 0);

  in a loop that updates with the movement of the mouse:

  BG.x = BG.m * MouseX + BG.b;

  function paramF(mc:MovieClip,x1:Number,y1:Number,x2:Number,y2:Number):void {}

  MC.m =(Y1-Y2) /(x1-x2);

  MC.b = Y1 - mc.m * x 1;

  }

• How to open the dialog Ctrl + Tab of a script? (I want to assign to a move of the mouse)

  How to open the dialog Ctrl + Tab of a script? (I want to assign to a move of the mouse)

  Do you mean Ctrl Tab (browser.ctrlTab.previews) Preview or browser: ShowAllTabs (allTabs.open ()); command or something else?

• Movement of the mouse jerky on Z220

  Hello

  I have several Z220 (XEON E3-1225 V2) with integrated graphics Intel P4000 as additional Nvidia Quadro 600 for the operation of 4 monitors.

  Most of the time I have problems with the movement of the mouse which is very jerky. Looks like she is dependent on the content of the screen, just under the cursor while moving.

  Any idea how you can solve this very annoying bug?

  Thank you

  McL

  Problem is solved... sort of.

  The graphics in internal P4000 has problems when a Nvidia graphics card. This seems to be known and there is nothing we can do about it - unfortunately.

  I had to disable the internal chart and add a second card Nvidia to use 3-4 monitors.

  ... just in case somebody stumbles on the same...

  McL

• buttons, links of Web page, the options are not visible until I have the mouse on the box

  As in this detail window that I'm filled, there are some blue vertical lines, but no text appears until I have the mouse on each box. I use an Acer Aspire 5100 with Windows XP Pro 2002 with service pak 3 installed. I think that this problem started last summer when I installed service pak 3 or installed Windows Security Essentials. At the same time, I started having trouble with the issue of "jumping cursor" that has been requested here countless times.

  I have Firefox and I.Explorer and both have the same problems.

  EVERYONE, you have any suggestions or succeeded fixing this problem.

  Hey Chinkapin,.

  In addition to advice of Gokul, I think it would be a good idea to update your drivers for your computer laptop touchpad, I saw a lot of problems here. Follow this thread and this thread here to see others with this issue describes what worked for him.
  Also, if you still have questions, you said it started when you installed Service Pack 3, I think it's a good test to do back up to Service Pack 2 (uninstall SP3) and see if your PC is back to normal, there might be a conflict between something on your system and the service pack. To help with that follow this link here.
  So give those a try and let me know your results. Thanks for posting!

• Limit the movements of the mouse in Authorware

  Hi all

  
  I try to limit the movements of the mouse of a user in Authorware. So far, I was able to do something that changes the cursor when it is over a square (mobile area). However, I missed out yet how to limit the mouse to go outside the edge of the square. Thinking has been to follow the point where the user has left the square with the cursor and set CursorX and CursorY to these values. However, these system variables cannot set a value, read only (AFAIK). Did anyone have any suggestions?

  Kind regards

  Frank

  Cannot be done with Authorware alone...

  Easy solution - use the SetCursor function to hide the mouse (4) when he leaves the defined area, set it to the arrow (0) when he enters. Don't forget to put the arrow, so when you leave the page otherwise.

  More difficult, but what you need – load the SetCursorPos of WinAPI.u32 function that allows you to actually set the cursor position... then as above, when the cursor leaves the area defined, to put back...

  Help?

  Erik

• Movement of the mouse oriented in AS3?

  I need help with something.

  Basically, I try to make a platform game, I know how to move left and right with the arrow keys, but it's pretty boring.

  I want to spend my character based only on the movement of my mouse x. more I move my mouse in a certain direction, the faster the character goes in this direction. I tried to change the speed of x on my character based on an x-value of the mouse, but nothing works.

  preferably, I want a code that keeps my cursor to the center of the screen, while being able to detect the movements of the mouse x.

  I copy paste the code in my program, but I'm pretty confident that it will do so no goal. I need a new direction. I have no idea how to proceed.

  any help is greatly appreciated.

  :

  :

  speed must be greater than 0

  var speed: Number =. 01;

  Mouse.Hide ();

  var t:Timer = new Timer (100.0);

  t.addEventListener (TimerEvent.TIMER, loopF);

  t.Start ();

  function loopF(e:TimerEvent):void {}

  yourchar.x += (mouseX - stage.stageWidth / 2) * speed;

  }

• Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)

  Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.

  Try this:

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

• When you look at YouTube videos the screen freezes up to wiggle the mouse

  Original title: Media Player

  Okay, I like listen to the videos on u tube. When I watch and listen to the screen freezes until I have move the mouse? Why?

  Hello

  Thanks for posting the question in the Microsoft Community!

  I understand that the computer freezes watching YouTube videos. I'm sorry for the inconvenience caused to you.

  (1) are you trying to watch the video online or recorded YouTube video?

  (2) is the specific question of YouTube videos?

  (3) the problem happens when you watch videos online of the browser?

  (4) what version of Internet Explorer is installed on the computer?

  (5) did you of recent changes to the computer before the show?

  (6) what is the format of the video file if you downloaded from YouTube?

  You can perform the following methods and check if it helps to solve the problem.

  Method 1: Solve the video issues in Windows Media Player and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2: Playing video files crashes or blocking Internet Explorer or Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/en-us

  Method 3: Troubleshoot video using Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: Perform these steps if you are faced with the question while watching videos online.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• screen freezes until the mouse is moved, firefox 36.0.4

  I am running Win7-Pro running and Firefox 36.0.4 on my HP laptop and my wife's HP desktop. That office knows this 'freezing problem until the mouse moves on the screen ". The problem occurs in Safe Mode. Don't know what else to try, but willing to try anything. Thanks for your help.

  This could be malicious associates.

  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  You can check the suspicious extensions or recently installed unknowns.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• That is to say 10: Flash freeze with the movement of the mouse

  Using FP 11.6.602.171 with IE 10 RTM of Windows 7 (x 64), many flash apps will freeze when the mouse cursor moves above the flash area.

  Deactivation of Accell HW in IE10 or FP files does not solve the problem.

  I made a video to show what is happening:

  https://www.YouTube.com/watch?v=I3DCFTMouxw

  PS: It is not past 10 Release Preview IE with flash 11.6.602.168

  Edit: Looks like someone has already filled a bug for the same thing:

  https://BugBase.Adobe.com/index.cfm?event=bug & ID = 3507613

  Finally! It looks like this

  THIS BUG has BEEN FIXED by Microsoft in the IE 10 June update framework:

  http://support.Microsoft.com/kb/2838727

• I need to register the movements of the mouse ON the video

  Hello!

  I made an animation moch-up of my web application. Now, I need a certain way records mouse movements, and I want to save a living mouse movements.

  I found this tutorial:

  After Effects Tutorial: movements of the realistic slider - YouTube

  I use EI 'Motion Scetch' characteristic. But I can't have a video layer in the back PLAYING at the same time.

  I need mouse record ON video that play at the same time.

  How can I do this?

  Pekka

  I'm not sure you understand completely Motion Sketch. If you have already registered or made your video demo, you can put it in AE and sketch of movement allows you to move your virtual mouse on the background. The problem with Motion Sketch, is that you do not get a preview of the video.

  I would like to invest in a program like ScreenFlow or Camtasia and make screenshot this direct. AE does not have this feature and animating the mouse movements by hand for a 10-minute demonstration video can easily you take 20 hours.

  If you have something like Adobe XD used for the design of your web application, then you can record directly from this application.